Wiki source code of Linksys EA8100

Version 1.1 by Leon Poon on 2018/12/24 10:13
Hide last authors
Leon Poon 1.1 1
2 [[url:https://www.linksys.com/sg/p/P-EA8100/]]
3
4 Linksys EA8100 Max-Stream™ AC2600 MU-MIMO Gigabit WiFi Router
5
6 Dev wiki: [[url:https://wikidevi.com/wiki/Linksys_EA8100]]
7
8 UART: 3.3v 115200.
9
10 {{code language="plain"}}
11 ===================================================================
12 MT7621 stage1 code 10:33:11 (ASIC)
13 CPU=50000000 HZ BUS=16666666 HZ
14 ==================================================================
15 Change MPLL source from XTAL to CR...
16 do MEMPLL setting..
17 MEMPLL Config : 0x11100000
18 3PLL mode + External loopback
19 === XTAL-40Mhz === DDR-1200Mhz ===
20 PLL2 FB_DL: 0xe, 1/0 = 621/403 39000000
21 PLL3 FB_DL: 0x10, 1/0 = 646/378 41000000
22 PLL4 FB_DL: 0x1a, 1/0 = 533/491 69000000
23 do DDR setting..[00320381]
24 Apply DDR3 Setting...(use customer AC)
25 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
26 --------------------------------------------------------------------------------
27 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
28 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
29 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
30 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
32 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
33 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
34 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
35 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
36 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
37 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
38 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
39 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
40 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
41 000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
42 000F:| 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0
43 0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
44 0011:| 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
45 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
46 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
47 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
48 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
49 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
50 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
51 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
52 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
53 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
54 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
55 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
56 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
57 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
58 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
59 rank 0 coarse = 15
60 rank 0 fine = 72
61 B:| 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0
62 opt_dle value:10
63 DRAMC_R0DELDLY[018]=00001D1D
64 ==================================================================
65 RX DQS perbit delay software calibration
66 ==================================================================
67 1.0-15 bit dq delay value
68 ==================================================================
69 bit| 0 1 2 3 4 5 6 7 8 9
70 --------------------------------------
71 0 | 12 3 11 5 11 1 12 2 0 8
72 10 | 3 10 6 9 3 8
73 --------------------------------------
74
75 ==================================================================
76 2.dqs window
77 x=pass dqs delay value (min~max)center
78 y=0-7bit DQ of every group
79 input delay:DQS0 =29 DQS1 = 29
80 ==================================================================
81 bit DQS0 bit DQS1
82 0 (1~58)29 8 (1~54)27
83 1 (1~52)26 9 (1~53)27
84 2 (1~56)28 10 (1~52)26
85 3 (1~54)27 11 (1~55)28
86 4 (1~58)29 12 (1~57)29
87 5 (1~51)26 13 (1~55)28
88 6 (1~58)29 14 (1~56)28
89 7 (1~56)28 15 (1~56)28
90 ==================================================================
91 3.dq delay value last
92 ==================================================================
93 bit| 0 1 2 3 4 5 6 7 8 9
94 --------------------------------------
95 0 | 12 6 12 7 11 4 12 3 2 10
96 10 | 6 11 6 10 4 9
97 ==================================================================
98 ==================================================================
99 TX perbyte calibration
100 ==================================================================
101 DQS loop = 15, cmp_err_1 = ffff0000
102 dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
103 dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
104 DQ loop=15, cmp_err_1 = ffff01aa
105 DQ loop=14, cmp_err_1 = ffff01aa
106 DQ loop=13, cmp_err_1 = ffff00aa
107 dqs_perbyte_dly.last_dqdly_pass[1]=13, finish count=1
108 DQ loop=12, cmp_err_1 = ffff0000
109 dqs_perbyte_dly.last_dqdly_pass[0]=12, finish count=2
110 byte:0, (DQS,DQ)=(9,8)
111 byte:1, (DQS,DQ)=(9,8)
112 20,data:99
113 [EMI] DRAMC calibration passed
114
115 ===================================================================
116 MT7621 stage1 code done
117 CPU=50000000 HZ BUS=16666666 HZ
118 ===================================================================
119
120
121 U-Boot 1.1.3 (Aug 5 2016 - 15:06:22)
122
123 SERCOMM v1.03.0, Release date: 2016/08/05
124
125 Board: Ralink APSoC DRAM: 256 MB
126 relocate_code Pointer at: 8ffa8000
127
128 Config XHCI 40M PLL
129 Allocate 16 byte aligned buffer: 8ffdf070
130 Enable NFI Clock
131 # MTK NAND # : Use HW ECC
132 NAND ID [C2 F1 80 95 02]
133 Device found in MTK table, ID: c2f1, EXT_ID: 809502
134 Support this Device in MTK table! c2f1
135 select_chip
136 [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
137 Signature matched and data read!
138 load_fact_bbt success 1023
139 load fact bbt success
140 [mtk_nand] probe successfully!
141 mtd->writesize=2048 mtd->oobsize=64, mtd->erasesize=131072 devinfo.iowidth=8
142 ..============================================
143 Ralink UBoot Version: 5.0.0.0
144 --------------------------------------------
145 ASIC MT7621A DualCore (MAC to MT7530 Mode)
146 DRAM_CONF_FROM: Auto-Detection
147 DRAM_TYPE: DDR3
148 DRAM bus: 16 bit
149 Xtal Mode=3 OCP Ratio=1/3
150 Flash component: NAND Flash
151 Date:Aug 5 2016 Time:15:06:22
152 ============================================
153 icache: sets:256, ways:4, linesz:32 ,total:32768
154 dcache: sets:256, ways:4, linesz:32 ,total:32768
155
156 ##### The CPU freq = 880 MHZ ####
157 estimate memory size =256 Mbytes
158 #Reset_MT7530
159 set LAN/WAN WLLLL
160
161 Please choose the operation:
162 1: Load system code to SDRAM via TFTP.
163 2: Load system code then write to Flash via TFTP.
164 3: Boot system code via Flash (default).
165 4: Entr boot command line interface.
166 7: Load Boot Loader code then write to Flash via Serial.
167 9: Load Boot Loader code then write to Flash via TFTP. 0
168
169 #### auto_recovery ####
170
171 check env def auto_recovery no
172 check env def auto_recovery yes
173 check env def boot_part 1
174 check env def boot_part_ready 3
175 enabled:1, boot_part:1, boot_part_ready:3
176 ..nand read ret = 0x20000
177 boot_count:1, next_record:34
178 boot_count:1, next_record:34
179
180 3: System Boot system code via Flash.
181 ## Booting image at bc180000 ...
182 Image Name: Linksys EA8100 Router
183 Image Type: MIPS Linux Kernel Image (lzma compressed)
184 Data Size: 2365554 Bytes = 2.3 MB
185 Load Address: 80001000
186 Entry Point: 8000d1d0
187 ..................................... Verifying Checksum ... OK
188 Uncompressing Kernel Image ... OK
189 No initrd
190 ## Transferring control to Linux (at address 8000d1d0) ...
191 ## Giving linux memsize in MB, 256
192
193 Starting kernel ...
194
195
196 LINUX started...
197
198 THIS IS ASIC
199
200 SDK 5.0.S.0
201 Initializing cgroup subsys cpu
202 Linux version 2.6.36 (root@build-vm) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #81 SMP Tue Apr 24 06:24:25 PDT 2018
203
204 The CPU feqenuce set to 880 MHz
205 GCMP present
206 CPU revision is: 0001992f (MIPS 1004Kc)
207 Software DMA cache coherency
208 Determined physical RAM map:
209 memory: 10000000 @ 00000000 (usable)
210 Zone PFN ranges:
211 DMA 0x00000000 -> 0x0000c000
212 Normal 0x0000c000 -> 0x00010000
213 Movable zone start PFN for each node
214 early_node_map[1] active PFN ranges
215 0: 0x00000000 -> 0x00010000
216 Detected 3 available secondary CPU(s)
217 PERCPU: Embedded 7 pages/cpu @8c204000 s6912 r8192 d13568 u65536
218 pcpu-alloc: s6912 r8192 d13568 u65536 alloc=16*4096
219 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
220 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
221 Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock6 ro rootfstype=jffs2 init=/sbin/init
222 PID hash table entries: 1024 (order: 0, 4096 bytes)
223 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
224 Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
225 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
226 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
227 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
228 Writing ErrCtl register=0002c400
229 Readback ErrCtl register=0002c400
230 allocated 1310720 bytes of page_cgroup
231 please try 'cgroup_disable=memory' option if you don't want memory cgroups
232 Memory: 251276k/262144k available (5029k kernel code, 10868k reserved, 1589k data, 228k init, 0k highmem)
233 Hierarchical RCU implementation.
234 Verbose stalled-CPUs detection is disabled.
235 NR_IRQS:128
236 Trying to install interrupt handler for IRQ24
237 Trying to install interrupt handler for IRQ25
238 Trying to install interrupt handler for IRQ22
239 Trying to install interrupt handler for IRQ9
240 Trying to install interrupt handler for IRQ10
241 Trying to install interrupt handler for IRQ11
242 Trying to install interrupt handler for IRQ12
243 Trying to install interrupt handler for IRQ13
244 Trying to install interrupt handler for IRQ14
245 Trying to install interrupt handler for IRQ16
246 Trying to install interrupt handler for IRQ17
247 Trying to install interrupt handler for IRQ18
248 Trying to install interrupt handler for IRQ19
249 Trying to install interrupt handler for IRQ20
250 Trying to install interrupt handler for IRQ21
251 Trying to install interrupt handler for IRQ23
252 Trying to install interrupt handler for IRQ26
253 Trying to install interrupt handler for IRQ27
254 Trying to install interrupt handler for IRQ28
255 Trying to install interrupt handler for IRQ15
256 Trying to install interrupt handler for IRQ8
257 Trying to install interrupt handler for IRQ29
258 Trying to install interrupt handler for IRQ30
259 Trying to install interrupt handler for IRQ31
260 console [ttyS1] enabled
261 Calibrating delay loop... 561.15 BogoMIPS (lpj=1122304)
262 pid_max: default: 32768 minimum: 301
263 Mount-cache hash table entries: 512
264 Initializing cgroup subsys memory
265 launch: starting cpu1
266 launch: cpu1 gone!
267 CPU revision is: 0001992f (MIPS 1004Kc)
268 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
269 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
270 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
271 launch: starting cpu2
272 launch: cpu2 gone!
273 CPU revision is: 0001992f (MIPS 1004Kc)
274 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
275 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
276 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
277 launch: starting cpu3
278 launch: cpu3 gone!
279 CPU revision is: 0001992f (MIPS 1004Kc)
280 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
281 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
282 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
283 Brought up 4 CPUs
284 Synchronize counters across 4 CPUs: done.
285 devtmpfs: initialized
286 NET: Registered protocol family 16
287 release PCIe RST: RALINK_RSTCTRL = 7000000
288 PCIE PHY initialize
289 ***** Xtal 40MHz *****
290 start MT7621 PCIe register access
291 RALINK_RSTCTRL = 7000000
292 RALINK_CLKCFG1 = 77ffeff8
293
294 *************** MT7621 PCIe RC mode *************
295 PCIE2 no card, disable it(RST&CLK)
296 pcie_link status = 0x3
297 RALINK_RSTCTRL= 3000000
298 *** Configure Device number setting of Virtual PCI-PCI bridge ***
299 RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
300 PCIE0 enabled
301 PCIE1 enabled
302 interrupt enable status: 300000
303 Port 1 N_FTS = 1b105000
304 Port 0 N_FTS = 1b105000
305 config reg done
306 init_rt2880pci done
307 bio: create slab <bio-0> at 0
308 vgaarb: loaded
309 SCSI subsystem initialized
310 usbcore: registered new interface driver usbfs
311 usbcore: registered new interface driver hub
312 usbcore: registered new device driver usb
313 pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
314 pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
315 pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
316 pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
317 pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
318 pci 0000:00:00.0: BAR 1: set to [mem 0x60200000-0x6020ffff] (PCI address [0x60200000-0x6020ffff]
319 pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
320 pci 0000:00:01.0: BAR 1: set to [mem 0x60210000-0x6021ffff] (PCI address [0x60210000-0x6021ffff]
321 pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
322 pci 0000:01:00.0: BAR 0: set to [mem 0x60000000-0x600fffff 64bit] (PCI address [0x60000000-0x600fffff]
323 pci 0000:00:00.0: PCI bridge to [bus 01-01]
324 pci 0000:00:00.0: bridge window [io disabled]
325 pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
326 pci 0000:00:00.0: bridge window [mem pref disabled]
327 pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
328 pci 0000:02:00.0: BAR 0: set to [mem 0x60100000-0x601fffff 64bit] (PCI address [0x60100000-0x601fffff]
329 pci 0000:00:01.0: PCI bridge to [bus 02-02]
330 pci 0000:00:01.0: bridge window [io disabled]
331 pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
332 pci 0000:00:01.0: bridge window [mem pref disabled]
333 PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
334 PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
335 BAR0 at slot 0 = 0
336 bus=0x0, slot = 0x0
337 res[0]->start = 0
338 res[0]->end = 0
339 res[1]->start = 60200000
340 res[1]->end = 6020ffff
341 res[2]->start = 0
342 res[2]->end = 0
343 res[3]->start = 0
344 res[3]->end = 0
345 res[4]->start = 0
346 res[4]->end = 0
347 res[5]->start = 0
348 res[5]->end = 0
349 BAR0 at slot 1 = 0
350 bus=0x0, slot = 0x1
351 res[0]->start = 0
352 res[0]->end = 0
353 res[1]->start = 60210000
354 res[1]->end = 6021ffff
355 res[2]->start = 0
356 res[2]->end = 0
357 res[3]->start = 0
358 res[3]->end = 0
359 res[4]->start = 0
360 res[4]->end = 0
361 res[5]->start = 0
362 res[5]->end = 0
363 bus=0x1, slot = 0x0, irq=0x4
364 res[0]->start = 60000000
365 res[0]->end = 600fffff
366 res[1]->start = 0
367 res[1]->end = 0
368 res[2]->start = 0
369 res[2]->end = 0
370 res[3]->start = 0
371 res[3]->end = 0
372 res[4]->start = 0
373 res[4]->end = 0
374 res[5]->start = 0
375 res[5]->end = 0
376 bus=0x2, slot = 0x1, irq=0x18
377 res[0]->start = 60100000
378 res[0]->end = 601fffff
379 res[1]->start = 0
380 res[1]->end = 0
381 res[2]->start = 0
382 res[2]->end = 0
383 res[3]->start = 0
384 res[3]->end = 0
385 res[4]->start = 0
386 res[4]->end = 0
387 res[5]->start = 0
388 res[5]->end = 0
389 Switching to clocksource Ralink Systick timer
390 NET: Registered protocol family 2
391 Clockevents: could not switch to one-shot mode:
392 Clockevents: could not switch to one-shot mode:
393 Clockevents: could not switch to one-shot mode:
394 Clockevents: could not switch to one-shot mode: MIPS is not functional.
395 MIPS is not functional.
396 MIPS is not functional.
397 Could not switch to high resolution mode on CPU 2
398 Could not switch to high resolution mode on CPU 1
399 Could not switch to high resolution mode on CPU 0
400 MIPS is not functional.
401 Could not switch to high resolution mode on CPU 3
402 IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
403 TCP established hash table entries: 8192 (order: 4, 65536 bytes)
404 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
405 TCP: Hash tables configured (established 8192 bind 8192)
406 TCP reno registered
407 UDP hash table entries: 128 (order: 0, 4096 bytes)
408 UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
409 NET: Registered protocol family 1
410 RPC: Registered udp transport module.
411 RPC: Registered tcp transport module.
412 RPC: Registered tcp NFSv4.1 backchannel transport module.
413 4 CPUs re-calibrate udelay(lpj = 1167360)
414 Load Kernel WDG Timer Module
415 squashfs: version 4.0 (2009/01/31) Phillip Lougher
416 JFFS2 version 2.2 (NAND) (ZLIB) (LZO) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
417 fuse init (API version 7.15)
418 msgmni has been set to 490
419 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
420 io scheduler noop registered (default)
421 register power led blinking slow.
422 register wps led off.
423 Ralink gpio driver initialized
424 Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
425 serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
426 serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
427 brd: module loaded
428 loop: module loaded
429 MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
430 Allocate 16 byte aligned buffer: 806e7070
431 Enable NFI Clock
432 # MTK NAND # : Use HW ECC
433 NAND ID [C2 F1 80 95 02, 00809502]
434 Device not found, ID: c2f1
435 Not Support this Device!
436 chip_mode=00000001
437 Support this Device in MTK table! c2f1
438 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
439 [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
440 Scanning device for bad blocks
441 Bad eraseblock 71 at 0x0000008e0000
442 Bad eraseblock 349 at 0x000002ba0000
443 Bad eraseblock 374 at 0x000002ec0000
444 Bad eraseblock 397 at 0x0000031a0000
445 Bad eraseblock 456 at 0x000003900000
446 Bad eraseblock 502 at 0x000003ec0000
447 Bad eraseblock 540 at 0x000004380000
448 Bad eraseblock 588 at 0x000004980000
449 Bad eraseblock 810 at 0x000006540000
450 Bad eraseblock 885 at 0x000006ea0000
451 Signature matched and data read!
452 load_fact_bbt success 1023
453 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
454 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
455 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 30 00 00
456 00 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 30 00 00
457 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00
458 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
459 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00
460 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
461 Creating 12 MTD partitions on "MT7621-NAND":
462 0x000000000000-0x000007f80000 : "ALL"
463 0x000000000000-0x000000080000 : "boot"
464 0x000000080000-0x0000000c0000 : "u_env"
465 0x0000000c0000-0x000000100000 : "Factory"
466 0x000000100000-0x000000140000 : "s_env"
467 0x000000140000-0x000000180000 : "devinfo"
468 0x000000180000-0x000002980000 : "kernel"
469 0x000000580000-0x000002980000 : "rootfs"
470 0x000002980000-0x000005180000 : "alt_kernel"
471 0x000002d80000-0x000005180000 : "alt_rootfs"
472 0x000005180000-0x000005280000 : "sysdiag"
473 0x000005280000-0x000007f80000 : "syscfg"
474 [mtk_nand] probe successfully!
475 rdm_major = 253
476 GMAC1_MAC_ADRH -- : 0x0000000c
477 GMAC1_MAC_ADRL -- : 0x432880f1
478 Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500!
479 GMAC1_MAC_ADRH -- : 0x0000000c
480 GMAC1_MAC_ADRL -- : 0x432880f0
481 PROC INIT OK!
482 Customize GPIO mode.change I2C & JTAG to GPIO mode.
483 org gpio_mode: 000a05a8
484 update gpio_mode: 000a05ac
485 new gpio_mode: 000a05ac
486 Check Eth LED.
487 PPP generic driver version 2.4.2
488 PPP MPPE Compression module registered
489 NET: Registered protocol family 24
490 PPTP driver version 0.8.5
491 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
492 FM_OUT value: u4FmOut = 0(0x00000000)
493 FM_OUT value: u4FmOut = 0(0x00000000)
494 FM_OUT value: u4FmOut = 0(0x00000000)
495 FM_OUT value: u4FmOut = 0(0x00000000)
496 FM_OUT value: u4FmOut = 0(0x00000000)
497 FM_OUT value: u4FmOut = 0(0x00000000)
498 FM_OUT value: u4FmOut = 0(0x00000000)
499 FM_OUT value: u4FmOut = 0(0x00000000)
500 FM_OUT value: u4FmOut = 0(0x00000000)
501 FM_OUT value: u4FmOut = 0(0x00000000)
502 FM_OUT value: u4FmOut = 0(0x00000000)
503 FM_OUT value: u4FmOut = 0(0x00000000)
504 FM_OUT value: u4FmOut = 0(0x00000000)
505 FM_OUT value: u4FmOut = 0(0x00000000)
506 FM_OUT value: u4FmOut = 0(0x00000000)
507 FM_OUT value: u4FmOut = 0(0x00000000)
508 FM_OUT value: u4FmOut = 0(0x00000000)
509 FM_OUT value: u4FmOut = 0(0x00000000)
510 FM_OUT value: u4FmOut = 0(0x00000000)
511 FM_OUT value: u4FmOut = 0(0x00000000)
512 xhc_mtk xhc_mtk: xHCI Host Controller
513 xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1
514 xhc_mtk xhc_mtk: irq 22, io mem 0x1e1c0000
515 hub 1-0:1.0: USB hub found
516 hub 1-0:1.0: 2 ports detected
517 xhc_mtk xhc_mtk: xHCI Host Controller
518 xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2
519 hub 2-0:1.0: USB hub found
520 hub 2-0:1.0: 1 port detected
521 Initializing USB Mass Storage driver...
522 usbcore: registered new interface driver usb-storage
523 USB Mass Storage support registered.
524 mt_msdc_init: !!!!! SDXC Module Initialize Fail !!!!!
525 u32 classifier
526 Actions configured
527 Netfilter messages via NETLINK v0.30.
528 nf_conntrack version 0.5.0 (3926 buckets, 15704 max)
529 ctnetlink v0.93: registering with nfnetlink.
530 nf_conntrack_rtsp v0.6.21 loading
531 IPVS: Registered protocols ()
532 IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
533 IPVS: ipvs loaded.
534 IPv4 over IPv4 tunneling driver
535 GRE over IPv4 demultiplexor driver
536 gre: can't add protocol
537 nf_nat_rtsp v0.6.21 loading
538 ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux
539 TCP cubic registered
540 NET: Registered protocol family 10
541 ip6_tables: (C) 2000-2006 Netfilter Core Team
542 IPv6 over IPv4 tunneling driver
543 NET: Registered protocol family 17
544 Bridge firewalling registered
545 Ebtables v2.0 registered
546 L2TP core driver, V2.0
547 PPPoL2TP kernel driver, V2.0
548 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
549 All bugs added by David S. Miller <davem@redhat.com>
550 Registering the dns_resolver key type
551 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x0527 instead
552 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x740d instead
553 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0xdf5a instead
554 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000000c: 0x2400 instead
555 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x0080 instead
556 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0x0080 instead
557 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0x881f instead
558 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0x0505 instead
559 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x694c instead
560 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000024: 0x7973 instead
561 Further such events for this erase block will not be printed
562 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x6210 instead
563 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x3271 instead
564 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020008: 0x9ab7 instead
565 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0x23d4 instead
566 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020010: 0xf355 instead
567 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020014: 0x223b instead
568 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0x327e instead
569 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0xd3c5 instead
570 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0x4a17 instead
571 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0xcd6a instead
572 Further such events for this erase block will not be printed
573 Old JFFS2 bitmask found at 0x0003efe8
574 You cannot use older JFFS2 filesystems with newer kernels
575 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x1e9f instead
576 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0x4c7d instead
577 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0x7708 instead
578 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004000c: 0x331d instead
579 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040010: 0x64fd instead
580 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040014: 0x1338 instead
581 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0x116a instead
582 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0xe09b instead
583 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0x8cf3 instead
584 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0xcbdc instead
585 Further such events for this erase block will not be printed
586 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0xb071 instead
587 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0x4e30 instead
588 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0x0de4 instead
589 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006000c: 0x84e9 instead
590 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060010: 0x26b4 instead
591 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060014: 0x0623 instead
592 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0x1130 instead
593 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0xd725 instead
594 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0x82c9 instead
595 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0xddfe instead
596 Further such events for this erase block will not be printed
597 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0xe24b instead
598 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0x055b instead
599 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0x0340 instead
600 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0x79e2 instead
601 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0x23f6 instead
602 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0xafef instead
603 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0xb97e instead
604 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0xb8a6 instead
605 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0x2c40 instead
606 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0xed87 instead
607 Further such events for this erase block will not be printed
608 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0000: 0x5760 instead
609 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0004: 0x4adb instead
610 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0008: 0x5d05 instead
611 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a000c: 0x25ea instead
612 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0010: 0x98b1 instead
613 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0014: 0x1caf instead
614 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0018: 0x071f instead
615 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a001c: 0x3bbc instead
616 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0020: 0x62e0 instead
617 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0024: 0xe18a instead
618 Further such events for this erase block will not be printed
619 Old JFFS2 bitmask found at 0x000a4108
620 You cannot use older JFFS2 filesystems with newer kernels
621 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0000: 0x1a57 instead
622 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0004: 0x29f7 instead
623 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0008: 0x1b85 instead
624 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c000c: 0x41f0 instead
625 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0010: 0xcde5 instead
626 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0014: 0x84b7 instead
627 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0018: 0xcad4 instead
628 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c001c: 0x98a1 instead
629 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0020: 0xdc36 instead
630 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0024: 0x22d4 instead
631 Further such events for this erase block will not be printed
632 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0000: 0xc5ae instead
633 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0004: 0xc23b instead
634 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0008: 0xf17b instead
635 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e000c: 0xe3c4 instead
636 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0010: 0x2697 instead
637 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0014: 0x84b6 instead
638 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0018: 0x8b8f instead
639 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e001c: 0xe870 instead
640 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0020: 0x3f56 instead
641 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0024: 0x6e6b instead
642 Further such events for this erase block will not be printed
643 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100000: 0x4149 instead
644 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100004: 0xe85b instead
645 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100008: 0x094e instead
646 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010000c: 0x7772 instead
647 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100010: 0xd114 instead
648 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100014: 0x34f5 instead
649 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100018: 0x11f9 instead
650 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010001c: 0x3ec2 instead
651 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100020: 0xdb3a instead
652 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100024: 0x32ca instead
653 Further such events for this erase block will not be printed
654 Old JFFS2 bitmask found at 0x001117f4
655 You cannot use older JFFS2 filesystems with newer kernels
656 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120000: 0x8f2e instead
657 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120004: 0x68d9 instead
658 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120008: 0xcdc1 instead
659 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012000c: 0xaf51 instead
660 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120010: 0x2fcb instead
661 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120014: 0xce0d instead
662 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120018: 0x4a65 instead
663 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012001c: 0xe087 instead
664 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120020: 0x0d2c instead
665 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120024: 0xca8e instead
666 Further such events for this erase block will not be printed
667 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140000: 0xb992 instead
668 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140004: 0xd59e instead
669 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140008: 0x92a5 instead
670 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014000c: 0x4983 instead
671 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140010: 0xf0d8 instead
672 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140014: 0x0066 instead
673 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140018: 0xa2a1 instead
674 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014001c: 0x49f8 instead
675 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140020: 0xa8a1 instead
676 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140024: 0x82d5 instead
677 Further such events for this erase block will not be printed
678 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160000: 0xce0b instead
679 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160004: 0x74bb instead
680 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160008: 0x67b6 instead
681 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016000c: 0x6d88 instead
682 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160010: 0x6e4a instead
683 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160014: 0x31cd instead
684 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160018: 0x10f2 instead
685 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016001c: 0x0460 instead
686 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160020: 0x2b19 instead
687 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160024: 0xd636 instead
688 Further such events for this erase block will not be printed
689 Old JFFS2 bitmask found at 0x00172c10
690 You cannot use older JFFS2 filesystems with newer kernels
691 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180000: 0xc161 instead
692 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180004: 0x43e8 instead
693 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180008: 0x71af instead
694 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018000c: 0xddb5 instead
695 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180010: 0xdde3 instead
696 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180014: 0x7a70 instead
697 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180018: 0xd63b instead
698 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018001c: 0xd9b9 instead
699 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180020: 0x7b77 instead
700 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180024: 0x02de instead
701 Further such events for this erase block will not be printed
702 Old JFFS2 bitmask found at 0x001879e8
703 You cannot use older JFFS2 filesystems with newer kernels
704 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0000: 0x4b1d instead
705 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0004: 0x11cf instead
706 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0008: 0x9574 instead
707 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a000c: 0x5785 instead
708 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0010: 0x34d0 instead
709 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0014: 0xc5be instead
710 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0018: 0x1c1b instead
711 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a001c: 0x9f73 instead
712 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0020: 0x0f56 instead
713 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0024: 0x2d01 instead
714 Further such events for this erase block will not be printed
715 Old JFFS2 bitmask found at 0x001a052c
716 You cannot use older JFFS2 filesystems with newer kernels
717 Old JFFS2 bitmask found at 0x001b7b0c
718 You cannot use older JFFS2 filesystems with newer kernels
719 Old JFFS2 bitmask found at 0x001bf9a0
720 You cannot use older JFFS2 filesystems with newer kernels
721 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0000: 0xed44 instead
722 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0004: 0x8ae2 instead
723 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0008: 0xed37 instead
724 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c000c: 0xbb13 instead
725 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0010: 0x33b4 instead
726 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0014: 0x49bc instead
727 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0018: 0x8e77 instead
728 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c001c: 0x7445 instead
729 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0020: 0xb2bd instead
730 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0024: 0x7454 instead
731 Further such events for this erase block will not be printed
732 Old JFFS2 bitmask found at 0x001ca158
733 You cannot use older JFFS2 filesystems with newer kernels
734 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0000: 0xf379 instead
735 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0004: 0x2aa7 instead
736 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0008: 0xacdc instead
737 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e000c: 0x4cc7 instead
738 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0010: 0xd39b instead
739 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0014: 0x876b instead
740 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0018: 0x63a1 instead
741 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e001c: 0x5d67 instead
742 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0020: 0x6a22 instead
743 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0024: 0xeb12 instead
744 Further such events for this erase block will not be printed
745 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200000: 0x4c5c instead
746 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200004: 0xa2e3 instead
747 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200008: 0xaadf instead
748 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020000c: 0x7c35 instead
749 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200010: 0xafab instead
750 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200014: 0xb8df instead
751 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200018: 0xc1fc instead
752 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020001c: 0x9955 instead
753 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200020: 0xfa30 instead
754 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200024: 0x7a3a instead
755 Further such events for this erase block will not be printed
756 Old JFFS2 bitmask found at 0x0021d228
757 You cannot use older JFFS2 filesystems with newer kernels
758 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220000: 0x3636 instead
759 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220004: 0xa16e instead
760 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220008: 0x41ab instead
761 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022000c: 0xf028 instead
762 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220010: 0x90f6 instead
763 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220014: 0xa2c7 instead
764 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220018: 0x93fd instead
765 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022001c: 0x7a95 instead
766 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220020: 0x6b27 instead
767 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220024: 0x7021 instead
768 Further such events for this erase block will not be printed
769 Old JFFS2 bitmask found at 0x0022d858
770 You cannot use older JFFS2 filesystems with newer kernels
771 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240000: 0x4f17 instead
772 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240004: 0xef19 instead
773 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240008: 0x5beb instead
774 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024000c: 0xb789 instead
775 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240010: 0xdfdd instead
776 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240014: 0xab1c instead
777 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240018: 0x83e6 instead
778 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024001c: 0x4a2e instead
779 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240020: 0xe8f5 instead
780 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240024: 0x511d instead
781 Further such events for this erase block will not be printed
782 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080000: 0x4c2e instead
783 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080004: 0x534b instead
784 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080008: 0x302e instead
785 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0208000c: 0x3030 instead
786 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080010: 0x4537 instead
787 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080014: 0x3031 instead
788 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080018: 0x2020 instead
789 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0208001c: 0x2020 instead
790 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080020: 0x3830 instead
791 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080024: 0x3539 instead
792 Further such events for this erase block will not be printed
793 VFS: Mounted root (jffs2 filesystem) readonly on device 31:6.
794 devtmpfs: mounted
795 Freeing unused kernel memory: 228k freed
796 *********************************************************************************
797 _ _ __ _ __ _____ __ __ _____
798 | | | || \ | | / // ____]\ \ / // ____]TM
799 | | | || \ | | / /| (___ \ V /| (____
800 | | | || |\ \| |\ \ \____ \ \ / \____ \
801 | |_____ | || | \ | \ \ ____) | | | ____) |
802 |_______||_||_| \__| \_\[____ / |_| [_____/
803
804 (c) 2013 Belkin International, Inc. and/or its affiliates. All rights reserved.
805 Booting cocoon (firmware version 1.0.1.188217)
806 *********************************************************************************
807 [utopia][init] System Initialization
808 [utopia][init] Creating /proc
809 [utopia][init] Creating /sys
810 [utopia][init] Creating /dev
811 [utopia][init] Creating /tmp
812 [utopia][init] Allocating 40M for /tmp
813 [utopia][init] Prepairing /dev/pts
814 [utopia][init] Setting /tmp and /var permissions
815 [utopia][init] Starting udev..
816 bdutil board utility kernel module, version 1.4
817 bdutil board utility kernel module boardId (0)
818 bdutil board utility LED kernel module, version 1.0
819 Attempting mount of ubifs syscfg partition
820 UBI device number 0, total 358 LEBs (45457408 bytes, 43.4 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
821 [utopia][init] Using persistent syscfg data from /var/config/syscfg
822 [utopia][init] Starting system logging
823 [utopia][init] Starting sysevent subsystem
824 net.netfilter.nf_conntrack_acct = 1
825 [utopia][init] Setting any unset system values to default
826 [utopia][init] no persistence config file (/var/config/pstcfg) found
827 setting up MAC addresses for all interface based on 24:F5:A2:56:40:46
828 Updating NTP Servers if necessary
829 Unit Model (EA8100) matches Firmware image (EA8100)
830 Cannot find device "eth3"
831 restore GSW to dump switch mode
832 REG_ESW_WT_MAC_ATC is 0x7ff0002
833 done.
834 checking for interactive script start up...
835 Updating BootCount Page[35]:11800 ... Done
836
837 [utopia][init] Starting bdutil daemon
838 attempting to sync sysinfo.cgi auth credentials
839 BDUTIL daemon mode (Focus/MTK)
840 Sat Dec 8 15:53:00 UTC 2018
841 restore GSW to dump switch mode
842 REG_ESW_WT_MAC_ATC is 0x7ff0002
843 done.
844
845 (none) login: udhcpc (v1.15.2) started
846 Sending discover...
847 wan, sysevent received: phylink_wan_state
848 Sending discover...
849 Sending discover...
850 wifi, sysevent received: lan-started
851 wifi, service_start()
852 Lighttpd Model Base: EA8100
853 Generating Rainier lighttpd config
854 wifi, wifi_onetime_setting
855 wifi, loading Wi-Fi driver
856 Build temporary www configuration directory:
857 $1$8Frh9urF$TZetgIfYebFxpXFqhJKEr.
858 Registering Service Linksys12182._http._tcp.local port 80
859 file_sharing, smp wifi
860 eth2/eth3 RPS: CPU0/1
861 starting /sbin/nmbd for bridge mode
862 Got a reply for Linksys12182._http._tcp.local.: Name now registered and active
863 Starting smbd ...
864 Multiple power table is not supported on boards that hw_revision=1
865 Channel list is available. Do nothing
866 wifi cache: saving wl0 physical settings
867 wifi cache: saving wl1 physical settings
868 wifi cache: saving wl0 virtual settings
869 wifi cache: saving wl1 virtual settings
870 wifi cache: saving wl0 guest settings
871 wifi cache: saving wl1 guest settings
872 wifi cache: saving wl0 simpletap settings
873 wifi cache: saving wl1 simpletap settings
874 Multi-region is not supported or not enabled
875 Cert region: AH
876 EA8100 product, checking 5G channel list.
877 channel list does not change.
878 killall: iwevent: no process killed
879 Waiting for Wireless Events from interfaces...
880 wifi, Multi-region is not supported or not enabled
881 wifi, Cert region: AH
882 wifi, ETxBfEnCond 0
883 wifi, ETxBfEnCond 1
884 wifi, MU-MIMO enabled
885 wifi, PMF disabled
886 wifi, HT_RDG 1
887 wifi, 256QAM enabled
888 wifi, BGProtection 1
889 wifi, ra0 setting rts thresh
890 wifi, HT_STBC 0
891 wifi, VHT_STBC 0
892 wifi, ra0 htduplicate enabled
893 wifi, ra0 setting framentation thresh
894 wifi, DFS disabled
895 wifi, TxBurst 1
896 wscd: SSDP UDP PORT = 1900
897 wifi, wifi_physical_start(ra0)
898 wifi, wifi_virtual_start(ra0)
899 wifi, wifi_user_start(ra0)
900 Not ready for JNAP. Sleeping for 15 seconds...
901 Sending discover...
902 Sending discover...
903 Sending discover...
904 Restarting nfqrecv service...
905 wifi, ra0 is up
906 nfq_create_queue() failed
907 wifi, wifi_guest_start(ra0)
908 wifi, Do not start guest network in bridge mode
909 wifi, Multi-region is not supported or not enabled
910 wifi, Cert region: AH
911 wifi, ETxBfEnCond 0
912 wifi, ETxBfEnCond 1
913 wifi, MU-MIMO enabled
914 wifi, PMF disabled
915 wifi, HT_RDG 1
916 wifi, 256QAM disabled
917 wifi, rai0 VhtBw=1 (80 MHz)
918 wifi, rai0 setting rts thresh
919 wifi, HT_STBC 1
920 wifi, VHT_STBC 0
921 wifi, rai0 htduplicate enabled
922 wifi, rai0 setting framentation thresh
923 wifi, DFS enabled
924 wscd: SSDP UDP PORT = 1900
925 wifi, TxBurst 1
926 wifi, wifi_physical_start(rai0)
927 wifi, wifi_virtual_start(rai0)
928 wifi, wifi_user_start(rai0)
929 wifi, rai0 is up
930 wifi, wifi_guest_start(rai0)
931 wifi, Do not start guest network in bridge mode
932 route: SIOCADDRT: File exists
933 wifi, restart wscd
934 killall: wscd: no process killed
935 wscd: SSDP UDP PORT = 1900
936 wifi, set wifi hw nat
937 Sending discover...
938 [fw.sh] fwup_checked_after_boot: 0
939 [fwupd] status details:"ERROR: Connecting server"
940 [fw.sh] fwup_forced_update: 0
941 Linksys12182 login: Sending discover...
942 Sending discover...
943 wifi, smp wifi
944 wscd: SSDP UDP PORT = 1900
945 eth2/eth3 RPS: CPU0/2
946 Sending discover...
947 Sending discover...
948 Sending discover...
949
950 Linksys12182 login:
951 Linksys12182 login: Sending discover...
952
953 Linksys12182 login: [fw.sh] fwup_checked_after_boot: 0
954 Sending discover...
955 [fwupd] status details:"ERROR: Connecting server"
956 [fw.sh] fwup_forced_update: 0
957 Sending discover...
958 Sending discover...
959 Sending discover...
960 Sending discover...
961 Sending discover...
962
963 [fw.sh] fwup_checked_after_boot: 0
964 Sending discover...
965 Linksys12182 login: [fwupd] status details:"ERROR: Connecting server"
966 [fw.sh] fwup_forced_update: 0
967 Sending discover...
968 Sending discover...
969 Sending discover...
970 Sending discover...
971
972 Login timed out
973 Linksys12182 login: Sending discover...
974 Sending discover...
975 [fw.sh] fwup_checked_after_boot: 0
976 Sending discover...
977 [fwupd] status details:"ERROR: Connecting server"
978 [fw.sh] fwup_forced_update: 0
979 Sending discover...
980 Sending discover...
981 Sending discover...
982 Sending discover...
983 Sending discover...
984 [fw.sh] fwup_checked_after_boot: 0
985 Sending discover...
986 [fwupd] status details:"ERROR: Connecting server"
987 [fw.sh] fwup_forced_update: 0
988 Sending discover...
989 Sending discover...
990 Sending discover...
991
992 {{/code}}
993
994 If tftp:
995
996 {{code language="plain"}}
997 Please choose the operation:
998 1: Load system code to SDRAM via TFTP.
999 2: Load system code then write to Flash via TFTP.
1000 3: Boot system code via Flash (default).
1001 4: Entr boot command line interface.
1002 7: Load Boot Loader code then write to Flash via Serial.
1003 9: Load Boot Loader code then write to Flash via TFTP. 4
1004 You choosed 1
1005 0
1006
1007
1008 1: System Load Linux to SDRAM via TFTP.
1009 Please Input new ones /or Ctrl-C to discard
1010 Input device IP (192.168.1.1) ==:192.168.1.1
1011 Input server IP (192.168.1.180) ==:192.168.1.180
1012 Input Linux Kernel filename (atlanta.img) ==:FW_EA8100_1.0.1.188217_prod.img
1013
1014 NetTxPacket = 0x8FFE3200
1015
1016 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
1017
1018 NetLoop,call eth_halt !
1019
1020 NetLoop,call eth_init !
1021 Trying Eth0 (10/100-M)
1022
1023 Waitting for RX_DMA_BUSY status Start... done
1024
1025
1026 ETH_STATE_ACTIVE!!
1027 TFTP from server 192.168.1.180; our IP address is 192.168.1.1
1028 Filename 'FW_EA8100_1.0.1.188217_prod.img'.
1029
1030 TIMEOUT_COUNT=10,Load address: 0x80a00000
1031 Loading: T T T T T T T T T T
1032 Retry count exceeded; starting again
1033
1034 ArpTimeoutCheck
1035 {{/code}}
1036
1037 file FW_EA8100_1.0.1.188217_prod.img loadable via tftp:
1038
1039 {{code language="plain"}}
1040 FW_EA8100_1.0.1.188217_prod.img: u-boot legacy uImage, Linksys EA8100 Router, Linux/MIPS, OS Kernel Image (lzma), 2365554 bytes, Tue Apr 24 13:24:45 2018, Load Address: 0x80001000, Entry Point: 0x8000D1D0, Header CRC: 0x0D741713, Data CRC: 0x1F88C713
1041 {{/code}}
1042
1043
1044 Openwrt RE6500 firmware from [[url:https://downloads.openwrt.org/releases/18.06.1/targets/ramips/mt7621/]] :
1045
1046 {{code language="plain"}}
1047 Please choose the operation:
1048 1: Load system code to SDRAM via TFTP.
1049 2: Load system code then write to Flash via TFTP.
1050 3: Boot system code via Flash (default).
1051 4: Entr boot command line interface.
1052 7: Load Boot Loader code then write to Flash via Serial.
1053 9: Load Boot Loader code then write to Flash via TFTP.
1054
1055 You choosed 1
1056 0
1057
1058
1059 1: System Load Linux to SDRAM via TFTP.
1060 Please Input new ones /or Ctrl-C to discard
1061 Input device IP (192.168.1.1) ==:192.168.1.1
1062 Input server IP (192.168.1.180) ==:192.168.1.180
1063 Input Linux Kernel filename (FW_EA8100_1.0.1.188217_prod.img) ==:openwrt-18.06.0-ramips-mt7621-re6500-initramfs-kernel.bin
1064
1065 NetTxPacket = 0x8FFE3200
1066
1067 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
1068
1069 NetLoop,call eth_halt !
1070
1071 NetLoop,call eth_init !
1072 Trying Eth0 (10/100-M)
1073
1074 Waitting for RX_DMA_BUSY status Start... done
1075
1076
1077 ETH_STATE_ACTIVE!!
1078 TFTP from server 192.168.1.180; our IP address is 192.168.1.1
1079 Filename 'openwrt-18.06.0-ramips-mt7621-re6500-initramfs-kernel.bin'.
1080
1081 TIMEOUT_COUNT=10,Load address: 0x80a00000
1082 Loading: checksum bad
1083 checksum bad
1084 checksum bad
1085 checksum bad
1086 checksum bad
1087 checksum bad
1088 Got ARP REPLY, set server/gtwy eth addr (bc:5f:f4:5a:c0:0c)
1089 Got it
1090 #################################################################
1091 #################################################################
1092 #################################################################
1093 #################################################################
1094 #################################################################
1095 #################################################################
1096 #################################################################
1097 #################################################################
1098 #################################################################
1099 #################################################################
1100 ####################
1101 done
1102 Bytes transferred = 3426753 (3449c1 hex)
1103 LoadAddr=80a00000 NetBootFileXferSize= 003449c1
1104 ..Erasing NAND Flash...
1105 ranand_erase: start:80000, len:20000
1106 .Writing to NAND Flash...
1107 done
1108 Automatic boot of image at addr 0x80A00000 ...
1109 ## Booting image at 80a00000 ...
1110 Image Name: MIPS OpenWrt Linux-4.14.54
1111 Image Type: MIPS Linux Kernel Image (lzma compressed)
1112 Data Size: 3426689 Bytes = 3.3 MB
1113 Load Address: 80001000
1114 Entry Point: 80001000
1115 Verifying Checksum ... OK
1116 Uncompressing Kernel Image ... OK
1117 No initrd
1118 ## Transferring control to Linux (at address 80001000) ...
1119 ## Giving linux memsize in MB, 256
1120
1121 Starting kernel ...
1122
1123 [ 0.000000] Linux version 4.14.54 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 SMP Mon Jul 30 16:25:17 2018
1124 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
1125 [ 0.000000] bootconsole [early0] enabled
1126 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
1127 [ 0.000000] MIPS: machine is Linksys RE6500
1128 [ 0.000000] Determined physical RAM map:
1129 [ 0.000000] memory: 04000000 @ 00000000 (usable)
1130 [ 0.000000] Initrd not found or empty - disabling initrd
1131 [ 0.000000] VPE topology {2,2} total 4
1132 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
1133 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
1134 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
1135 [ 0.000000] Zone ranges:
1136 [ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
1137 [ 0.000000] HighMem empty
1138 [ 0.000000] Movable zone start for each node
1139 [ 0.000000] Early memory node ranges
1140 [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
1141 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
1142 [ 0.000000] random: get_random_bytes called from 0x80549740 with crng_init=0
1143 [ 0.000000] percpu: Embedded 14 pages/cpu @8108f000 s26256 r8192 d22896 u57344
1144 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 16256
1145 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
1146 [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
1147 [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
1148 [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
1149 [ 0.000000] Writing ErrCtl register=0002c420
1150 [ 0.000000] Readback ErrCtl register=0002c420
1151 [ 0.000000] Memory: 57144K/65536K available (4593K kernel code, 242K rwdata, 564K rodata, 1820K init, 270K bss, 8392K reserved, 0K cma-reserved, 0K highmem)
1152 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
1153 [ 0.000000] Hierarchical RCU implementation.
1154 [ 0.000000] NR_IRQS: 256
1155 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
1156 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
1157 [ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
1158 [ 0.007808] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
1159 [ 0.073970] pid_max: default: 32768 minimum: 301
1160 [ 0.078737] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
1161 [ 0.085243] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
1162 [ 0.093922] Hierarchical SRCU implementation.
1163 [ 0.098967] smp: Bringing up secondary CPUs ...
1164 [ 0.104077] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
1165 [ 0.104085] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
1166 [ 0.104096] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
1167 [ 0.104231] CPU1 revision is: 0001992f (MIPS 1004Kc)
1168 [ 0.163708] Synchronize counters for CPU 1: done.
1169 [ 0.197906] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
1170 [ 0.197914] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
1171 [ 0.197923] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
1172 [ 0.197993] CPU2 revision is: 0001992f (MIPS 1004Kc)
1173 [ 0.254772] Synchronize counters for CPU 2: done.
1174 [ 0.285141] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
1175 [ 0.285149] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
1176 [ 0.285157] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
1177 [ 0.285234] CPU3 revision is: 0001992f (MIPS 1004Kc)
1178 [ 0.339953] Synchronize counters for CPU 3: done.
1179 [ 0.369810] smp: Brought up 1 node, 4 CPUs
1180 [ 0.377164] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
1181 [ 0.386946] futex hash table entries: 1024 (order: 3, 32768 bytes)
1182 [ 0.393234] pinctrl core: initialized pinctrl subsystem
1183 [ 0.399027] NET: Registered protocol family 16
1184 [ 0.408798] Can't analyze schedule() prologue at 80477e04
1185 [ 0.414835] pull PCIe RST: RALINK_RSTCTRL = 4000000
1186 [ 0.720023] release PCIe RST: RALINK_RSTCTRL = 7000000
1187 [ 0.725071] ***** Xtal 40MHz *****
1188 [ 0.728427] release PCIe RST: RALINK_RSTCTRL = 7000000
1189 [ 0.733524] Port 0 N_FTS = 1b102800
1190 [ 0.736992] Port 1 N_FTS = 1b102800
1191 [ 0.740438] Port 2 N_FTS = 1b102800
1192 [ 1.895574] PCIE2 no card, disable it(RST&CLK)
1193 [ 1.899934] -> 21007f2
1194 [ 1.902339] PCIE0 enabled
1195 [ 1.904928] PCIE1 enabled
1196 [ 1.907530] PCI host bridge /pcie@1e140000 ranges:
1197 [ 1.912305] MEM 0x0000000060000000..0x000000006fffffff
1198 [ 1.917460] IO 0x000000001e160000..0x000000001e16ffff
1199 [ 1.922663] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
1200 [ 1.937834] mt7621_gpio 1e000600.gpio: registering 32 gpios
1201 [ 1.943654] mt7621_gpio 1e000600.gpio: registering 32 gpios
1202 [ 1.949383] mt7621_gpio 1e000600.gpio: registering 32 gpios
1203 [ 1.956454] PCI host bridge to bus 0000:00
1204 [ 1.960484] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
1205 [ 1.967339] pci_bus 0000:00: root bus resource [io 0xffffffff]
1206 [ 1.973173] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
1207 [ 1.979930] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
1208 [ 1.988550] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
1209 [ 1.996479] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
1210 [ 2.005677] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
1211 [ 2.012232] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
1212 [ 2.019107] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
1213 [ 2.025681] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
1214 [ 2.032579] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
1215 [ 2.039336] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
1216 [ 2.046062] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
1217 [ 2.052824] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
1218 [ 2.059547] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
1219 [ 2.066822] pci 0000:00:00.0: PCI bridge to [bus 01]
1220 [ 2.071717] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
1221 [ 2.078483] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
1222 [ 2.085727] pci 0000:00:01.0: PCI bridge to [bus 02]
1223 [ 2.090661] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
1224 [ 2.098693] clocksource: Switched to clocksource GIC
1225 [ 2.105167] NET: Registered protocol family 2
1226 [ 2.110193] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
1227 [ 2.117069] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
1228 [ 2.123422] TCP: Hash tables configured (established 1024 bind 1024)
1229 [ 2.129819] UDP hash table entries: 256 (order: 1, 8192 bytes)
1230 [ 2.135583] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
1231 [ 2.142054] NET: Registered protocol family 1
1232 [ 3.748680] 4 CPUs re-calibrate udelay(lpj = 2924544)
1233 [ 3.755086] Crashlog allocated RAM at address 0x3f00000
1234 [ 3.760439] workingset: timestamp_bits=30 max_order=14 bucket_order=0
1235 [ 3.773653] squashfs: version 4.0 (2009/01/31) Phillip Lougher
1236 [ 3.779542] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
1237 [ 3.789372] random: fast init done
1238 [ 3.795810] io scheduler noop registered
1239 [ 3.799670] io scheduler deadline registered (default)
1240 [ 3.805914] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
1241 [ 3.815573] console [ttyS0] disabled
1242 {{/code}}