Last modified by Leon Poon on 2021/07/16 18:40
From version 1.1
edited by Leon Poon
on 2018/12/29 10:17
Change comment: There is no comment for this version
To version 13.1
edited by Leon Poon
on 2020/05/31 08:44
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -Main.Linksys EA8100.WebHome
1 +Linksys EA8100.WebHome
Content
... ... @@ -1,4 +1,744 @@
1 1  switch0: port 0 = wan, port 1,2,3,4 = lan
2 2  
3 3  
4 -
4 +[[https:~~/~~/github.com/LeonPoon/openwrt/compare/master...master-linksys_ea8100>>https://github.com/LeonPoon/openwrt/compare/master...master-linksys_ea8100]]
5 +
6 +
7 += 19.07.x =
8 +
9 +[[https:~~/~~/www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/>>url:https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]]
10 +
11 +The EA8100 contains 2 firmware partitions. Flashing via the Linksys UI will only flash openwrt into one of the 2 partitions.
12 +
13 +Download the "squashfs-factory.img" if you want to flash via Linksys web UI. After you flashed the img the first time, download the "squashfs-sysupgrade.bin" and run sysupgrade to flash this .bin to both firmware partitions.
14 +
15 +You cannot sysupgrade from 18.x to 19.07.x.
16 +
17 +Sysupgrade from 19.07.x will not save config! Back up your config and other files in the router before you sysupgrade.
18 +
19 +
20 += 18.x =
21 +
22 +9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
23 +
24 +* [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
25 +* [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
26 +
27 +Note that sysupgrade to a newer image is not likely to work.
28 +
29 +(% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
30 +|[[image:1567332570723-651.png]]
31 +
32 +Dmesg:
33 +
34 +{{code language="plain"}}
35 + 3: Boot system code via Flash (default).
36 + 4: Entr boot command line interface.
37 + 7: Load Boot Loader code then write to Flash via Serial.
38 + 9: Load Boot Loader code then write to Flash via TFTP. 4
39 +You choosed 2
40 + 0
41 +
42 +
43 +2: System Load Linux Kernel then write to Flash via TFTP.
44 + Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
45 + Please Input new ones /or Ctrl-C to discard
46 + Input device IP () ==:
47 + Input server IP () ==:
48 + Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
49 + which kernel partition to update (1/2/3=both) (2) ==:3
50 +
51 + NetTxPacket = 0x8FFE3200
52 +
53 + KSEG1ADDR(NetTxPacket) = 0xAFFE3200
54 +
55 + NetLoop,call eth_halt !
56 +
57 + NetLoop,call eth_init !
58 +Trying Eth0 (10/100-M)
59 +
60 + Waitting for RX_DMA_BUSY status Start... done
61 +
62 +
63 + ETH_STATE_ACTIVE!!
64 +TFTP from server ; our IP address is
65 +Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
66 +
67 + TIMEOUT_COUNT=10,Load address: 0x80100000
68 +Loading: Got ARP REPLY, set server/gtwy eth addr ()
69 +Got it
70 +#################################################################
71 + #################################################################
72 + #################################################################
73 + #################################################################
74 + #################################################################
75 + #################################################################
76 + #################################################################
77 + #################################################################
78 + #################################################################
79 + #################################################################
80 + #################################################################
81 + #################################################################
82 + #################################################################
83 + #################################################################
84 + #################################################################
85 + #################################################################
86 + #################################################################
87 + ################################################
88 +done
89 +Bytes transferred = 5898496 (5a0100 hex)
90 +LoadAddr=80100000 NetBootFileXferSize= 005a0100
91 +ranand_erase: start:180000, len:20000
92 +..ranand_erase: start:1a0000, len:20000
93 +..ranand_erase: start:1c0000, len:20000
94 +...
95 +.(5192)offs=7471104 piece=0 piece_size=256 rc=0
96 +Done!
97 +ranand_erase: start:2980000, len:20000
98 +..ranand_erase: start:29a0000, len:20000
99 +..ranand_erase: start:29c0000, len:20000
100 +...
101 +.(5192)offs=49676288 piece=0 piece_size=256 rc=0
102 +Done!
103 +## Booting image at bc180000 ...
104 + Image Name: MIPS OpenWrt Linux-4.14.141
105 + Image Type: MIPS Linux Kernel Image (lzma compressed)
106 + Data Size: 2010110 Bytes = 1.9 MB
107 + Load Address: 80001000
108 + Entry Point: 80001000
109 +............................... Verifying Checksum ... OK
110 + Uncompressing Kernel Image ... OK
111 +No initrd
112 +## Transferring control to Linux (at address 80001000) ...
113 +## Giving linux memsize in MB, 256
114 +
115 +Starting kernel ...
116 +
117 +[ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
118 +[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
119 +[ 0.000000] bootconsole [early0] enabled
120 +[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
121 +[ 0.000000] MIPS: machine is Linksys EA8100
122 +[ 0.000000] Determined physical RAM map:
123 +[ 0.000000] memory: 10000000 @ 00000000 (usable)
124 +[ 0.000000] Initrd not found or empty - disabling initrd
125 +[ 0.000000] VPE topology {2,2} total 4
126 +[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
127 +[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
128 +[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
129 +[ 0.000000] Zone ranges:
130 +[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
131 +[ 0.000000] HighMem empty
132 +[ 0.000000] Movable zone start for each node
133 +[ 0.000000] Early memory node ranges
134 +[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
135 +[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
136 +[ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
137 +[ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
138 +[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
139 +[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
140 +[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
141 +[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
142 +[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
143 +[ 0.000000] Writing ErrCtl register=0002c420
144 +[ 0.000000] Readback ErrCtl register=0002c420
145 +[ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
146 +[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
147 +[ 0.000000] Hierarchical RCU implementation.
148 +[ 0.000000] NR_IRQS: 256
149 +[ 0.000000] CPU Clock: 880MHz
150 +[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
151 +[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
152 +[ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
153 +[ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
154 +[ 0.073969] pid_max: default: 32768 minimum: 301
155 +[ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
156 +[ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
157 +[ 0.094340] Hierarchical SRCU implementation.
158 +[ 0.099495] smp: Bringing up secondary CPUs ...
159 +[ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
160 +[ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
161 +[ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
162 +[ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
163 +[ 0.164211] Synchronize counters for CPU 1: done.
164 +[ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
165 +[ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
166 +[ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
167 +[ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
168 +[ 0.255179] Synchronize counters for CPU 2: done.
169 +[ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
170 +[ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
171 +[ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
172 +[ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
173 +[ 0.340367] Synchronize counters for CPU 3: done.
174 +[ 0.370232] smp: Brought up 1 node, 4 CPUs
175 +[ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
176 +[ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
177 +[ 0.394408] pinctrl core: initialized pinctrl subsystem
178 +[ 0.401009] NET: Registered protocol family 16
179 +[ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
180 +[ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
181 +[ 0.725598] ***** Xtal 40MHz *****
182 +[ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
183 +[ 0.734049] Port 0 N_FTS = 1b102800
184 +[ 0.737517] Port 1 N_FTS = 1b102800
185 +[ 0.740963] Port 2 N_FTS = 1b102800
186 +[ 1.896358] PCIE2 no card, disable it(RST&CLK)
187 +[ 1.900719] -> 21007f2
188 +[ 1.903123] PCIE0 enabled
189 +[ 1.905712] PCIE1 enabled
190 +[ 1.908316] PCI host bridge /pcie@1e140000 ranges:
191 +[ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
192 +[ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
193 +[ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
194 +[ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
195 +[ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
196 +[ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
197 +[ 1.958178] PCI host bridge to bus 0000:00
198 +[ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
199 +[ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
200 +[ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
201 +[ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
202 +[ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
203 +[ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
204 +[ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
205 +[ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
206 +[ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
207 +[ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
208 +[ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
209 +[ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
210 +[ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
211 +[ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
212 +[ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
213 +[ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
214 +[ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
215 +[ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
216 +[ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
217 +[ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
218 +[ 2.100582] clocksource: Switched to clocksource GIC
219 +[ 2.107275] NET: Registered protocol family 2
220 +[ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
221 +[ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
222 +[ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
223 +[ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
224 +[ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
225 +[ 2.144212] NET: Registered protocol family 1
226 +[ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
227 +[ 2.387039] Crashlog allocated RAM at address 0x3f00000
228 +[ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
229 +[ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
230 +[ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
231 +[ 2.425815] random: fast init done
232 +[ 2.430745] io scheduler noop registered
233 +[ 2.434579] io scheduler deadline registered (default)
234 +[ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
235 +[ 2.448257] console [ttyS0] disabled
236 +[ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
237 +[ 2.460836] console [ttyS0] enabled
238 +[ 2.460836] console [ttyS0] enabled
239 +[ 2.467691] bootconsole [early0] disabled
240 +[ 2.467691] bootconsole [early0] disabled
241 +[ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
242 +[ 2.484816] Enable NFI Clock
243 +[ 2.487689] # MTK NAND # : Use HW ECC
244 +[ 2.491382] Device not found, ID: c2f1
245 +[ 2.495110] Not Support this Device!
246 +[ 2.498835] chip_mode=00000001
247 +[ 2.501893] Support this Device in MTK table! c2f1
248 +[ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
249 +[ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
250 +[ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
251 +[ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
252 +[ 2.531927] Scanning device for bad blocks
253 +[ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
254 +[ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
255 +[ 2.831774] 0x000000000000-0x000000080000 : "uboot"
256 +[ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
257 +[ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
258 +[ 2.849892] 0x000000100000-0x000000140000 : "s_env"
259 +[ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
260 +[ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
261 +[ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
262 +[ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
263 +[ 2.884061] 0x000002980000-0x000005180000 : "firmware"
264 +[ 3.438509] 2 uimage-fw partitions found on MTD device firmware
265 +[ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
266 +[ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
267 +[ 3.456742] [mtk_nand] probe successfully!
268 +[ 3.461570] Signature matched and data read!
269 +[ 3.465818] load_fact_bbt success 1023
270 +[ 3.470276] libphy: Fixed MDIO Bus: probed
271 +[ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
272 +[ 3.550970] mtd_read_prop_mac: hw_mac_addr=
273 +[ 3.556774] libphy: mdio: probed
274 +[ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
275 +[ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
276 +[ 4.978262] NET: Registered protocol family 10
277 +[ 4.984286] Segment Routing with IPv6
278 +[ 4.988020] NET: Registered protocol family 17
279 +[ 4.992556] 8021q: 802.1Q VLAN Support v1.8
280 +[ 4.999621] UBI: auto-attach mtd9
281 +[ 5.003015] ubi0: attaching mtd9
282 +[ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
283 +[ 5.039967] ubi0: scanning is finished
284 +[ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
285 +[ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
286 +[ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
287 +[ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
288 +[ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
289 +[ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
290 +[ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
291 +[ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
292 +[ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
293 +[ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
294 +[ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
295 +[ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
296 +[ 5.165234] hctosys: unable to open rtc device (rtc0)
297 +[ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
298 +[ 5.195491] Freeing unused kernel memory: 1260K
299 +[ 5.200022] This architecture does not have kernel memory protection.
300 +[ 5.783744] init: Console is alive
301 +[ 5.787378] init: - watchdog -
302 +[ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
303 +[ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
304 +[ 6.591413] usbcore: registered new interface driver usbfs
305 +[ 6.596966] usbcore: registered new interface driver hub
306 +[ 6.602453] usbcore: registered new device driver usb
307 +[ 6.615285] SCSI subsystem initialized
308 +[ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
309 +[ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
310 +[ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
311 +[ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
312 +[ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
313 +[ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
314 +[ 6.676639] hub 1-0:1.0: USB hub found
315 +[ 6.680467] hub 1-0:1.0: 2 ports detected
316 +[ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
317 +[ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
318 +[ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
319 +[ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
320 +[ 6.713446] hub 2-0:1.0: USB hub found
321 +[ 6.717275] hub 2-0:1.0: 1 port detected
322 +[ 6.727313] usbcore: registered new interface driver usb-storage
323 +[ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
324 +[ 6.750877] init: - preinit -
325 +[ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
326 +[ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
327 +[ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
328 +[ 7.225920] scsi host0: usb-storage 2-1:1.0
329 +[ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
330 +Press the [f] key and hit [enter] to enter failsafe mode
331 +Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
332 +[ 10.582466] UBIFS (ubi0:1): default file-system created
333 +[ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
334 +[ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
335 +[ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
336 +[ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
337 +[ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
338 +[ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
339 +[ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
340 +[ 10.756981] mount_root: switching to ubifs overlay
341 +[ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
342 +[ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
343 +[ 10.876085] procd: - early -
344 +[ 10.879061] procd: - watchdog -
345 +[ 11.550737] procd: - watchdog -
346 +[ 11.554202] procd: - ubus -
347 +[ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
348 +[ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
349 +[ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
350 +[ 11.625387] procd: - init -
351 +Please press Enter to activate this console.
352 +[ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
353 +[ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
354 +[ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
355 +[ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
356 +[ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
357 +[ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
358 +[ 12.127574] urngd: v1.0.0 started.
359 +[ 12.145053] xt_time: kernel timezone is -0000
360 +[ 12.214244] bus=0x1, slot = 0x0, irq=0x0
361 +[ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
362 +[ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
363 +[ 12.241178]
364 +[ 12.266469] random: crng init done
365 +[ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
366 +[ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
367 +[ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
368 ++ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
369 +[ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
370 +[ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
371 +[ 20.161193]
372 +[ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
373 +[ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
374 +[ 27.852570] PPP generic driver version 2.4.2
375 +[ 27.858358] NET: Registered protocol family 24
376 +[ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
377 +[ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
378 +[ 41.287935] br-lan: port 1(eth0.2) entered blocking state
379 +[ 41.293420] br-lan: port 1(eth0.2) entered disabled state
380 +[ 41.299522] device eth0.2 entered promiscuous mode
381 +[ 41.304484] device eth0 entered promiscuous mode
382 +[ 41.311947] br-lan: port 1(eth0.2) entered blocking state
383 +[ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
384 +[ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
385 +[ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
386 +
387 +
388 +
389 +BusyBox v1.31.0 () built-in shell (ash)
390 +
391 + _______ ________ __
392 + | |.-----.-----.-----.| | | |.----.| |_
393 + | - || _ | -__| || | | || _|| _|
394 + |_______|| __|_____|__|__||________||__| |____|
395 + |__| W I R E L E S S F R E E D O M
396 + -----------------------------------------------------
397 + OpenWrt SNAPSHOT, r10942-9bebafcb5d
398 + -----------------------------------------------------
399 +=== WARNING! =====================================
400 +There is no root password defined on this device!
401 +Use the "passwd" command to set up a new password
402 +in order to prevent unauthorized SSH logins.
403 +--------------------------------------------------
404 +root@OpenWrt:/# ifconfig -a
405 +br-lan Link encap:Ethernet HWaddr
406 + inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
407 + inet6 addr: fde0:62db:5134::1/60 Scope:Global
408 + inet6 addr: fe80::/64 Scope:Link
409 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
410 + RX packets:41 errors:0 dropped:0 overruns:0 frame:0
411 + TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
412 + collisions:0 txqueuelen:1000
413 + RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
414 +
415 +eth0 Link encap:Ethernet HWaddr
416 + inet6 addr: fe80::/64 Scope:Link
417 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
418 + RX packets:102 errors:0 dropped:0 overruns:0 frame:0
419 + TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
420 + collisions:0 txqueuelen:1000
421 + RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
422 + Interrupt:21
423 +
424 +eth0.1 Link encap:Ethernet HWaddr
425 + inet6 addr: fe80::/64 Scope:Link
426 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
427 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0
428 + TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
429 + collisions:0 txqueuelen:1000
430 + RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
431 +
432 +eth0.2 Link encap:Ethernet HWaddr
433 + UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
434 + RX packets:41 errors:0 dropped:0 overruns:0 frame:0
435 + TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
436 + collisions:0 txqueuelen:1000
437 + RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
438 +
439 +lo Link encap:Local Loopback
440 + inet addr:127.0.0.1 Mask:255.0.0.0
441 + inet6 addr: ::1/128 Scope:Host
442 + UP LOOPBACK RUNNING MTU:65536 Metric:1
443 + RX packets:28 errors:0 dropped:0 overruns:0 frame:0
444 + TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
445 + collisions:0 txqueuelen:1000
446 + RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
447 +
448 +wlan0 Link encap:Ethernet HWaddr
449 + BROADCAST MULTICAST MTU:1500 Metric:1
450 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0
451 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
452 + collisions:0 txqueuelen:1000
453 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
454 +
455 +wlan1 Link encap:Ethernet HWaddr
456 + BROADCAST MULTICAST MTU:1500 Metric:1
457 + RX packets:0 errors:0 dropped:0 overruns:0 frame:0
458 + TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
459 + collisions:0 txqueuelen:1000
460 + RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
461 +
462 +root@OpenWrt:/# ls -l
463 +drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
464 +drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
465 +drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
466 +-rwxr-xr-x 1 root root 78 Dec 30 2018 init
467 +drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
468 +drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
469 +drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
470 +dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
471 +drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
472 +drwxr-xr-x 2 root root 3 Sep 1 06:04 root
473 +drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
474 +dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
475 +drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
476 +drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
477 +lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
478 +drwxr-xr-x 2 root root 3 Sep 1 06:04 www
479 +root@OpenWrt:/# ps
480 + PID USER VSZ STAT COMMAND
481 + 1 root 1576 S /sbin/procd
482 + 2 root 0 SW [kthreadd]
483 + 3 root 0 IW [kworker/0:0]
484 + 4 root 0 IW< [kworker/0:0H]
485 + 5 root 0 IW [kworker/u8:0]
486 + 6 root 0 IW< [mm_percpu_wq]
487 + 7 root 0 SW [ksoftirqd/0]
488 + 8 root 0 IW [rcu_sched]
489 + 9 root 0 IW [rcu_bh]
490 + 10 root 0 SW [migration/0]
491 + 11 root 0 SW [cpuhp/0]
492 + 12 root 0 SW [cpuhp/1]
493 + 13 root 0 SW [migration/1]
494 + 14 root 0 SW [ksoftirqd/1]
495 + 16 root 0 IW< [kworker/1:0H]
496 + 17 root 0 SW [cpuhp/2]
497 + 18 root 0 SW [migration/2]
498 + 19 root 0 SW [ksoftirqd/2]
499 + 21 root 0 IW< [kworker/2:0H]
500 + 22 root 0 SW [cpuhp/3]
501 + 23 root 0 SW [migration/3]
502 + 24 root 0 SW [ksoftirqd/3]
503 + 25 root 0 IW [kworker/3:0]
504 + 26 root 0 IW< [kworker/3:0H]
505 + 27 root 0 IW< [netns]
506 + 41 root 0 IW [kworker/u8:3]
507 + 68 root 0 IW [kworker/3:1]
508 + 69 root 0 IW [kworker/2:1]
509 + 138 root 0 IW [kworker/1:1]
510 + 139 root 0 SW [oom_reaper]
511 + 140 root 0 IW< [writeback]
512 + 142 root 0 SW [kcompactd0]
513 + 143 root 0 IW< [crypto]
514 + 145 root 0 IW< [kblockd]
515 + 175 root 0 IW< [watchdogd]
516 + 199 root 0 SW [kswapd0]
517 + 268 root 0 IW< [pencrypt]
518 + 270 root 0 IW< [pdecrypt]
519 + 366 root 0 IW< [ipv6_addrconf]
520 + 378 root 0 SW [ubi_bgt0d]
521 + 383 root 0 IW< [kworker/0:1H]
522 + 384 root 0 IW< [kworker/2:1H]
523 + 385 root 0 IW [kworker/2:2]
524 + 386 root 0 IW< [kworker/3:1H]
525 + 389 root 0 IW< [kworker/1:1H]
526 + 429 root 0 IW [kworker/0:2]
527 + 437 root 0 IW [kworker/1:2]
528 + 453 root 0 SW [scsi_eh_0]
529 + 454 root 0 IW< [scsi_tmf_0]
530 + 455 root 0 SW [usb-storage]
531 + 496 root 0 SW [ubifs_bgt0_1]
532 + 573 root 1220 S /sbin/ubusd
533 + 574 root 1220 S /bin/ash --login
534 + 591 root 1028 S /sbin/urngd
535 + 660 root 0 IW< [cfg80211]
536 + 1012 root 1248 S /sbin/logd -S 64
537 + 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
538 + 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
539 + 1168 root 1700 S /sbin/netifd
540 + 1204 root 1448 S /usr/sbin/odhcpd
541 + 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
542 + 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
543 + 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
544 + 1720 root 1212 R ps
545 +root@OpenWrt:/etc# ping www.google.co
546 +PING www.google.co (): 56 data bytes
547 +64 bytes from : seq=0 ttl=52 time=4.718 ms
548 +^C
549 +--- www.google.co ping statistics ---
550 +1 packets transmitted, 1 packets received, 0% packet loss
551 +round-trip min/avg/max = 4.718/4.718/4.718 ms
552 +root@OpenWrt:/etc# ping www.google.com
553 +PING www.google.com (): 56 data bytes
554 +64 bytes from : seq=0 ttl=47 time=4.927 ms
555 +64 bytes from : seq=1 ttl=47 time=4.687 ms
556 +^C
557 +--- www.google.com ping statistics ---
558 +2 packets transmitted, 2 packets received, 0% packet loss
559 +round-trip min/avg/max = 4.687/4.807/4.927 ms
560 +root@OpenWrt:/etc# opkg update
561 +Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
562 +Updated list of available packages in /var/opkg-lists/openwrt_core
563 +Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
564 +Signature check passed.
565 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
566 +Updated list of available packages in /var/opkg-lists/openwrt_base
567 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
568 +Signature check passed.
569 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
570 +Updated list of available packages in /var/opkg-lists/openwrt_luci
571 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
572 +Signature check passed.
573 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
574 +Updated list of available packages in /var/opkg-lists/openwrt_packages
575 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
576 +Signature check passed.
577 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
578 +Updated list of available packages in /var/opkg-lists/openwrt_routing
579 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
580 +Signature check passed.
581 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
582 +Updated list of available packages in /var/opkg-lists/openwrt_telephony
583 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
584 +Signature check passed.
585 +root@OpenWrt:/etc# opkg install luci
586 +Installing luci (git-19.241.65047-dffe9ca-1) to root...
587 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
588 +Installing uhttpd (2019-08-17-6b03f960-3) to root...
589 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
590 +Installing liblua5.1.5 (5.1.5-5) to root...
591 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
592 +Installing lua (5.1.5-5) to root...
593 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
594 +Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
595 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
596 +Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
597 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
598 +Installing rpcd (2019-06-05-89bfaa42-3) to root...
599 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
600 +Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
601 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
602 +Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
603 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
604 +Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
605 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
606 +Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
607 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
608 +Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
609 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
610 +Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
611 +Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
612 +Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
613 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
614 +Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
615 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
616 +Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
617 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
618 +Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
619 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
620 +Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
621 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
622 +Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
623 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
624 +Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
625 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
626 +Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
627 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
628 +Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
629 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
630 +Installing rpcd-mod-rrdns (20170710) to root...
631 +Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
632 +Configuring liblucihttp0.
633 +Configuring luci-app-opkg.
634 +Configuring rpcd.
635 +Configuring liblua5.1.5.
636 +Configuring luci-lib-ip.
637 +Configuring libubus-lua.
638 +Configuring libiwinfo-lua.
639 +Configuring lua.
640 +Configuring luci-lib-nixio.
641 +Configuring luci-lib-jsonc.
642 +Configuring liblucihttp-lua.
643 +Configuring luci-base.
644 +Configuring luci-mod-system.
645 +Configuring luci-theme-bootstrap.
646 +Configuring luci-mod-status.
647 +Configuring luci-app-firewall.
648 +Configuring luci-proto-ppp.
649 +Configuring luci-mod-network.
650 +Configuring luci-mod-admin-full.
651 +Configuring luci-proto-ipv6.
652 +Configuring uhttpd.
653 +Configuring rpcd-mod-rrdns.
654 +Configuring luci.
655 +root@OpenWrt:/etc# df -h
656 +Filesystem Size Used Available Use% Mounted on
657 +/dev/root 2.8M 2.8M 0 100% /rom
658 +tmpfs 123.5M 764.0K 122.8M 1% /tmp
659 +/dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
660 +overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
661 +tmpfs 512.0K 0 512.0K 0% /dev
662 +root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
663 +[ 2075.973245] br-lan: port 2(wlan0) entered blocking state
664 +[ 2075.978551] br-lan: port 2(wlan0) entered disabled state
665 +[ 2075.984368] device wlan0 entered promiscuous mode
666 +[ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
667 +[ 2087.171890] br-lan: port 2(wlan0) entered blocking state
668 +[ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
669 +[ 2096.494533] device wlan0 left promiscuous mode
670 +[ 2096.499322] br-lan: port 2(wlan0) entered disabled state
671 +[ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
672 +[ 2097.393568] br-lan: port 2(wlan0) entered blocking state
673 +[ 2097.398924] br-lan: port 2(wlan0) entered disabled state
674 +[ 2097.404922] device wlan0 entered promiscuous mode
675 +[ 2097.409972] br-lan: port 2(wlan0) entered blocking state
676 +[ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
677 +[ 2097.749351] br-lan: port 2(wlan0) entered disabled state
678 +[ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
679 +[ 2107.960561] br-lan: port 2(wlan0) entered blocking state
680 +[ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
681 +[ 2117.964353] device wlan0 left promiscuous mode
682 +[ 2117.969130] br-lan: port 2(wlan0) entered disabled state
683 +[ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
684 +[ 2118.792816] br-lan: port 2(wlan0) entered blocking state
685 +[ 2118.798173] br-lan: port 2(wlan0) entered disabled state
686 +[ 2118.804171] device wlan0 entered promiscuous mode
687 +[ 2118.809362] br-lan: port 2(wlan0) entered blocking state
688 +[ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
689 +[ 2119.189273] br-lan: port 2(wlan0) entered disabled state
690 +[ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
691 +[ 2130.264811] br-lan: port 2(wlan0) entered blocking state
692 +[ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
693 +[ 2245.748473] device wlan0 left promiscuous mode
694 +[ 2245.753145] br-lan: port 2(wlan0) entered disabled state
695 +[ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
696 +[ 2246.546273] br-lan: port 2(wlan0) entered blocking state
697 +[ 2246.551680] br-lan: port 2(wlan0) entered disabled state
698 +[ 2246.557667] device wlan0 entered promiscuous mode
699 +[ 2246.562855] br-lan: port 2(wlan0) entered blocking state
700 +[ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
701 +[ 2246.838430] br-lan: port 2(wlan0) entered disabled state
702 +[ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
703 +[ 2246.954850] br-lan: port 2(wlan1) entered blocking state
704 +[ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
705 +
706 +root@OpenWrt:/etc#
707 +root@OpenWrt:/etc# uci show wireless
708 +wireless.radio0=wifi-device
709 +wireless.radio0.type='mac80211'
710 +wireless.radio0.channel='11'
711 +wireless.radio0.hwmode='11g'
712 +wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
713 +wireless.radio0.country='00'
714 +wireless.radio0.legacy_rates='1'
715 +wireless.radio0.htmode='HT20'
716 +wireless.default_radio0=wifi-iface
717 +wireless.default_radio0.device='radio0'
718 +wireless.default_radio0.network='lan'
719 +wireless.default_radio0.mode='ap'
720 +wireless.default_radio0.encryption='psk2'
721 +wireless.default_radio0.key='qwerty1234'
722 +wireless.default_radio0.ssid='asdf'
723 +wireless.radio1=wifi-device
724 +wireless.radio1.type='mac80211'
725 +wireless.radio1.channel='36'
726 +wireless.radio1.hwmode='11a'
727 +wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
728 +wireless.radio1.htmode='VHT80'
729 +wireless.radio1.__toggle='Enable'
730 +wireless.radio1.country='00'
731 +wireless.radio1.legacy_rates='1'
732 +wireless.default_radio1=wifi-iface
733 +wireless.default_radio1.device='radio1'
734 +wireless.default_radio1.network='lan'
735 +wireless.default_radio1.mode='ap'
736 +wireless.default_radio1.ssid='asdf'
737 +wireless.default_radio1.encryption='psk2'
738 +wireless.default_radio1.key='qwerty1234'
739 +root@OpenWrt:/etc#
740 +{{/code}}
741 +
742 +Firmware:
743 +
744 +./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin
1567332570723-651.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.CodePowered
Size
... ... @@ -1,0 +1,1 @@
1 +166.8 KB
Content
openwrt-ramips-mt7621-ea8100-initramfs-kernel.bin
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.CodePowered
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 MB
Content
openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.CodePowered
Size
... ... @@ -1,0 +1,1 @@
1 +4.3 MB
Content
openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.CodePowered
Size
... ... @@ -1,0 +1,1 @@
1 +4.5 MB
Content
openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.CodePowered
Size
... ... @@ -1,0 +1,1 @@
1 +5.6 MB
Content
XWiki.XWikiComments[0]
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.ugene
Comment
... ... @@ -1,0 +1,1 @@
1 +Thanks for sharing!
Date
... ... @@ -1,0 +1,1 @@
1 +2019-05-10 00:42:45.0