Last modified by Leon Poon on 2021/07/16 18:40
From version 16.1
edited by Leon Poon
on 2020/05/31 11:49
Change comment: There is no comment for this version
To version 8.1
edited by Leon Poon
on 2019/09/01 09:26
Change comment: Uploaded new attachment "openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin", version 1.1

Summary

Details

Page properties
Content
... ... @@ -1,121 +1,33 @@
1 1  switch0: port 0 = wan, port 1,2,3,4 = lan
2 2  
3 -If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>ea8100]].
4 4  
4 +[[https:~~/~~/github.com/LeonPoon/openwrt/compare/master...master-linksys_ea8100>>https://github.com/LeonPoon/openwrt/compare/master...master-linksys_ea8100]]
5 5  
6 -= 19.07.x =
6 +b90086cc98a15a2774382b691f1249f4ad11a1c7 Download (no wifi):
7 7  
8 -[[https:~~/~~/www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/>>url:https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]] ([[https:~~/~~/github.com/LeonPoon/openwrt/compare/v19.07.3...v19.07.3-linksys_ea8100>>url:https://github.com/LeonPoon/openwrt/compare/v19.07.3...v19.07.3-linksys_ea8100]])
8 +* [[initramfs-kernel.bin>>attach:Linksys EA8100.Openwrt for Linksys EA8100.WebHome@openwrt-ramips-mt7621-ea8100-initramfs-kernel.bin]]
9 +* [[squashfs-sysupgrade.bin>>attach:Linksys EA8100.Openwrt for Linksys EA8100.WebHome@openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin]] (accepted as upgrade in factory UI)
9 9  
10 -The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partition.
11 -
12 -How to flash:
13 -
14 -If your router currently has stock Linksys firmware:
15 -
16 -1. flash the "squashfs-factory.img" via Linksys UI, cross your fingers that it boots openwrt when auto rebooting. Otherwise keep rebooting until it loads openwrt. (Usually 3 times max.)
17 -1. access LuCI via LAN. (It's at 192.168.1.1 so you should set connect your computer and configure your computer with an IP on same subnet eg 192.168.1.2/24). Set root password so that SSH server starts. (do not configure/restart.)
18 -1. Scp the "squashfs-sysupgrade.bin" into /tmp in the router.
19 -1. Log in via SSH.
20 -1. Sysupgrade the squashfs-sysupgrade.bin. This should flash the openwrt firmware into both firmware partitions. It auto reboots.
21 -
22 -If you are on my 18.x below, sysupgrade will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" and boot into it, then sysupgrade. Back up data before mtd write!
23 -
24 -Subsequently sysupgrade from 19.07.x should work but it will **not **save config! Back up your config and other files in the router before you sysupgrade.
25 -
26 -Wifi seem to work at 30-40MB/s with a MacBook Pro.
27 -
28 -
29 -= 18.x =
30 -
31 -9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
32 -
33 -* [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
34 -* [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
35 -
36 -Note that sysupgrade to a newer image is not likely to work.
37 -
38 -(% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
39 -|[[image:1567332570723-651.png]]
40 -
41 41  Dmesg:
42 42  
43 43  {{code language="plain"}}
44 - 3: Boot system code via Flash (default).
45 - 4: Entr boot command line interface.
46 - 7: Load Boot Loader code then write to Flash via Serial.
47 - 9: Load Boot Loader code then write to Flash via TFTP. 4
48 -You choosed 2
49 - 0
14 +check env def auto_recovery no
15 +check env def auto_recovery yes
16 +check env def boot_part 1
17 +check env def boot_part_ready 3
18 +enabled:1, boot_part:2, boot_part_ready:3
19 +..nand read ret = 0x20000
20 +boot_count:1, next_record:4
21 +boot_count:1, next_record:4
50 50  
51 -
52 -2: System Load Linux Kernel then write to Flash via TFTP.
53 - Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
54 - Please Input new ones /or Ctrl-C to discard
55 - Input device IP () ==:
56 - Input server IP () ==:
57 - Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
58 - which kernel partition to update (1/2/3=both) (2) ==:3
59 -
60 - NetTxPacket = 0x8FFE3200
61 -
62 - KSEG1ADDR(NetTxPacket) = 0xAFFE3200
63 -
64 - NetLoop,call eth_halt !
65 -
66 - NetLoop,call eth_init !
67 -Trying Eth0 (10/100-M)
68 -
69 - Waitting for RX_DMA_BUSY status Start... done
70 -
71 -
72 - ETH_STATE_ACTIVE!!
73 -TFTP from server ; our IP address is
74 -Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
75 -
76 - TIMEOUT_COUNT=10,Load address: 0x80100000
77 -Loading: Got ARP REPLY, set server/gtwy eth addr ()
78 -Got it
79 -#################################################################
80 - #################################################################
81 - #################################################################
82 - #################################################################
83 - #################################################################
84 - #################################################################
85 - #################################################################
86 - #################################################################
87 - #################################################################
88 - #################################################################
89 - #################################################################
90 - #################################################################
91 - #################################################################
92 - #################################################################
93 - #################################################################
94 - #################################################################
95 - #################################################################
96 - ################################################
97 -done
98 -Bytes transferred = 5898496 (5a0100 hex)
99 -LoadAddr=80100000 NetBootFileXferSize= 005a0100
100 -ranand_erase: start:180000, len:20000
101 -..ranand_erase: start:1a0000, len:20000
102 -..ranand_erase: start:1c0000, len:20000
103 -...
104 -.(5192)offs=7471104 piece=0 piece_size=256 rc=0
105 -Done!
106 -ranand_erase: start:2980000, len:20000
107 -..ranand_erase: start:29a0000, len:20000
108 -..ranand_erase: start:29c0000, len:20000
109 -...
110 -.(5192)offs=49676288 piece=0 piece_size=256 rc=0
111 -Done!
112 -## Booting image at bc180000 ...
113 - Image Name: MIPS OpenWrt Linux-4.14.141
23 +3: System Boot system code via Flash.
24 +## Booting image at be980000 ...
25 + Image Name: MIPS OpenWrt Linux-4.14.101
114 114   Image Type: MIPS Linux Kernel Image (lzma compressed)
115 - Data Size: 2010110 Bytes = 1.9 MB
27 + Data Size: 1908285 Bytes = 1.8 MB
116 116   Load Address: 80001000
117 117   Entry Point: 80001000
118 -............................... Verifying Checksum ... OK
30 +.............................. Verifying Checksum ... OK
119 119   Uncompressing Kernel Image ... OK
120 120  No initrd
121 121  ## Transferring control to Linux (at address 80001000) ...
... ... @@ -123,7 +123,7 @@
123 123  
124 124  Starting kernel ...
125 125  
126 -[ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
38 +[ 0.000000] Linux version 4.14.101 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r9033-cbee2131d6)) #0 SMP Sat Feb 16 05:28:27 2019
127 127  [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
128 128  [ 0.000000] bootconsole [early0] enabled
129 129  [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
... ... @@ -142,16 +142,16 @@
142 142  [ 0.000000] Early memory node ranges
143 143  [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
144 144  [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
145 -[ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
146 -[ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
147 -[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
57 +[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x4a4 with crng_init=0
58 +[ 0.000000] percpu: Embedded 14 pages/cpu @8120f000 s26192 r8192 d22960 u57344
59 +[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
148 148  [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
149 149  [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
150 150  [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
151 151  [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
152 -[ 0.000000] Writing ErrCtl register=0002c420
153 -[ 0.000000] Readback ErrCtl register=0002c420
154 -[ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
64 +[ 0.000000] Writing ErrCtl register=0002c42c
65 +[ 0.000000] Readback ErrCtl register=0002c42c
66 +[ 0.000000] Memory: 253304K/262144K available (4502K kernel code, 233K rwdata, 1000K rodata, 268K init, 248K bss, 8840K reserved, 0K cma-reserved, 0K highmem)
155 155  [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
156 156  [ 0.000000] Hierarchical RCU implementation.
157 157  [ 0.000000] NR_IRQS: 256
... ... @@ -159,244 +159,210 @@
159 159  [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
160 160  [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
161 161  [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
162 -[ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
163 -[ 0.073969] pid_max: default: 32768 minimum: 301
164 -[ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
165 -[ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
166 -[ 0.094340] Hierarchical SRCU implementation.
167 -[ 0.099495] smp: Bringing up secondary CPUs ...
168 -[ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
169 -[ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
170 -[ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
171 -[ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
172 -[ 0.164211] Synchronize counters for CPU 1: done.
173 -[ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
174 -[ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
175 -[ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
176 -[ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
177 -[ 0.255179] Synchronize counters for CPU 2: done.
178 -[ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
179 -[ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
180 -[ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
181 -[ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
182 -[ 0.340367] Synchronize counters for CPU 3: done.
183 -[ 0.370232] smp: Brought up 1 node, 4 CPUs
184 -[ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
185 -[ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
186 -[ 0.394408] pinctrl core: initialized pinctrl subsystem
187 -[ 0.401009] NET: Registered protocol family 16
188 -[ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
189 -[ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
190 -[ 0.725598] ***** Xtal 40MHz *****
191 -[ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
192 -[ 0.734049] Port 0 N_FTS = 1b102800
193 -[ 0.737517] Port 1 N_FTS = 1b102800
194 -[ 0.740963] Port 2 N_FTS = 1b102800
195 -[ 1.896358] PCIE2 no card, disable it(RST&CLK)
196 -[ 1.900719] -> 21007f2
197 -[ 1.903123] PCIE0 enabled
198 -[ 1.905712] PCIE1 enabled
199 -[ 1.908316] PCI host bridge /pcie@1e140000 ranges:
200 -[ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
201 -[ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
202 -[ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
203 -[ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
204 -[ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
205 -[ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
206 -[ 1.958178] PCI host bridge to bus 0000:00
207 -[ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
208 -[ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
209 -[ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
210 -[ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
211 -[ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
212 -[ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
213 -[ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
214 -[ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
215 -[ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
216 -[ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
217 -[ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
218 -[ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
219 -[ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
220 -[ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
221 -[ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
222 -[ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
223 -[ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
224 -[ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
225 -[ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
226 -[ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
227 -[ 2.100582] clocksource: Switched to clocksource GIC
228 -[ 2.107275] NET: Registered protocol family 2
229 -[ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
230 -[ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
231 -[ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
232 -[ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
233 -[ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
234 -[ 2.144212] NET: Registered protocol family 1
235 -[ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
236 -[ 2.387039] Crashlog allocated RAM at address 0x3f00000
237 -[ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
238 -[ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
239 -[ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
240 -[ 2.425815] random: fast init done
241 -[ 2.430745] io scheduler noop registered
242 -[ 2.434579] io scheduler deadline registered (default)
243 -[ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
244 -[ 2.448257] console [ttyS0] disabled
245 -[ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
246 -[ 2.460836] console [ttyS0] enabled
247 -[ 2.460836] console [ttyS0] enabled
248 -[ 2.467691] bootconsole [early0] disabled
249 -[ 2.467691] bootconsole [early0] disabled
250 -[ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
251 -[ 2.484816] Enable NFI Clock
252 -[ 2.487689] # MTK NAND # : Use HW ECC
253 -[ 2.491382] Device not found, ID: c2f1
254 -[ 2.495110] Not Support this Device!
255 -[ 2.498835] chip_mode=00000001
256 -[ 2.501893] Support this Device in MTK table! c2f1
257 -[ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
258 -[ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
259 -[ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
260 -[ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
261 -[ 2.531927] Scanning device for bad blocks
262 -[ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
263 -[ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
264 -[ 2.831774] 0x000000000000-0x000000080000 : "uboot"
265 -[ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
266 -[ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
267 -[ 2.849892] 0x000000100000-0x000000140000 : "s_env"
268 -[ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
269 -[ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
270 -[ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
271 -[ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
272 -[ 2.884061] 0x000002980000-0x000005180000 : "firmware"
273 -[ 3.438509] 2 uimage-fw partitions found on MTD device firmware
274 -[ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
275 -[ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
276 -[ 3.456742] [mtk_nand] probe successfully!
277 -[ 3.461570] Signature matched and data read!
278 -[ 3.465818] load_fact_bbt success 1023
279 -[ 3.470276] libphy: Fixed MDIO Bus: probed
280 -[ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
281 -[ 3.550970] mtd_read_prop_mac: hw_mac_addr=
282 -[ 3.556774] libphy: mdio: probed
283 -[ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
284 -[ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
285 -[ 4.978262] NET: Registered protocol family 10
286 -[ 4.984286] Segment Routing with IPv6
287 -[ 4.988020] NET: Registered protocol family 17
288 -[ 4.992556] 8021q: 802.1Q VLAN Support v1.8
289 -[ 4.999621] UBI: auto-attach mtd9
290 -[ 5.003015] ubi0: attaching mtd9
291 -[ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
292 -[ 5.039967] ubi0: scanning is finished
293 -[ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
294 -[ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
295 -[ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
296 -[ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
297 -[ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
298 -[ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
299 -[ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
300 -[ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
301 -[ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
302 -[ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
303 -[ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
304 -[ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
305 -[ 5.165234] hctosys: unable to open rtc device (rtc0)
306 -[ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
307 -[ 5.195491] Freeing unused kernel memory: 1260K
308 -[ 5.200022] This architecture does not have kernel memory protection.
309 -[ 5.783744] init: Console is alive
310 -[ 5.787378] init: - watchdog -
311 -[ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
312 -[ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
313 -[ 6.591413] usbcore: registered new interface driver usbfs
314 -[ 6.596966] usbcore: registered new interface driver hub
315 -[ 6.602453] usbcore: registered new device driver usb
316 -[ 6.615285] SCSI subsystem initialized
317 -[ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
318 -[ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
319 -[ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
320 -[ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
321 -[ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
322 -[ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
323 -[ 6.676639] hub 1-0:1.0: USB hub found
324 -[ 6.680467] hub 1-0:1.0: 2 ports detected
325 -[ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
326 -[ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
327 -[ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
328 -[ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
329 -[ 6.713446] hub 2-0:1.0: USB hub found
330 -[ 6.717275] hub 2-0:1.0: 1 port detected
331 -[ 6.727313] usbcore: registered new interface driver usb-storage
332 -[ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
333 -[ 6.750877] init: - preinit -
334 -[ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
335 -[ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
336 -[ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
337 -[ 7.225920] scsi host0: usb-storage 2-1:1.0
338 -[ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
74 +[ 0.007805] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
75 +[ 0.073978] pid_max: default: 32768 minimum: 301
76 +[ 0.078744] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
77 +[ 0.085252] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
78 +[ 0.094034] Hierarchical SRCU implementation.
79 +[ 0.099185] smp: Bringing up secondary CPUs ...
80 +[ 0.109505] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
81 +[ 0.109515] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
82 +[ 0.109526] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
83 +[ 0.109664] CPU1 revision is: 0001992f (MIPS 1004Kc)
84 +[ 0.163934] Synchronize counters for CPU 1: done.
85 +[ 0.203356] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
86 +[ 0.203365] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
87 +[ 0.203372] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
88 +[ 0.203446] CPU2 revision is: 0001992f (MIPS 1004Kc)
89 +[ 0.255085] Synchronize counters for CPU 2: done.
90 +[ 0.290669] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
91 +[ 0.290678] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
92 +[ 0.290686] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
93 +[ 0.290767] CPU3 revision is: 0001992f (MIPS 1004Kc)
94 +[ 0.340270] Synchronize counters for CPU 3: done.
95 +[ 0.370137] smp: Brought up 1 node, 4 CPUs
96 +[ 0.377732] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
97 +[ 0.387523] futex hash table entries: 1024 (order: 3, 32768 bytes)
98 +[ 0.393811] pinctrl core: initialized pinctrl subsystem
99 +[ 0.400270] NET: Registered protocol family 16
100 +[ 0.423063] mt7621_gpio 1e000600.gpio: registering 32 gpios
101 +[ 0.428878] mt7621_gpio 1e000600.gpio: registering 32 gpios
102 +[ 0.434658] mt7621_gpio 1e000600.gpio: registering 32 gpios
103 +[ 0.442956] clocksource: Switched to clocksource GIC
104 +[ 0.449425] NET: Registered protocol family 2
105 +[ 0.454419] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
106 +[ 0.461303] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
107 +[ 0.467778] TCP: Hash tables configured (established 2048 bind 2048)
108 +[ 0.474212] UDP hash table entries: 256 (order: 1, 8192 bytes)
109 +[ 0.479979] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
110 +[ 0.486452] NET: Registered protocol family 1
111 +[ 0.722896] 4 CPUs re-calibrate udelay(lpj = 2924544)
112 +[ 0.729302] Crashlog allocated RAM at address 0x3f00000
113 +[ 0.734701] workingset: timestamp_bits=30 max_order=16 bucket_order=0
114 +[ 0.748195] squashfs: version 4.0 (2009/01/31) Phillip Lougher
115 +[ 0.753975] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
116 +[ 0.765554] random: fast init done
117 +[ 0.770526] io scheduler noop registered
118 +[ 0.774396] io scheduler deadline registered (default)
119 +[ 0.780409] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
120 +[ 0.788106] console [ttyS0] disabled
121 +[ 0.791645] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
122 +[ 0.800653] console [ttyS0] enabled
123 +[ 0.800653] console [ttyS0] enabled
124 +[ 0.807523] bootconsole [early0] disabled
125 +[ 0.807523] bootconsole [early0] disabled
126 +[ 0.816146] cacheinfo: Unable to detect cache hierarchy for CPU 0
127 +[ 0.823038] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
128 +[ 0.830119] Enable NFI Clock
129 +[ 0.833044] # MTK NAND # : Use HW ECC
130 +[ 0.836708] Device not found, ID: c2f1
131 +[ 0.840433] Not Support this Device!
132 +[ 0.844177] chip_mode=00000001
133 +[ 0.847217] Support this Device in MTK table! c2f1
134 +[ 0.852163] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
135 +[ 0.858632] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
136 +[ 0.864966] nand: Macronix NAND 128MiB 3,3V 8-bit
137 +[ 0.869648] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
138 +[ 0.877212] Scanning device for bad blocks
139 +[ 0.898080] Bad eraseblock 71 at 0x0000008e0000
140 +[ 0.967695] Bad eraseblock 349 at 0x000002ba0000
141 +[ 0.978049] Bad eraseblock 374 at 0x000002ec0000
142 +[ 0.987933] Bad eraseblock 397 at 0x0000031a0000
143 +[ 1.006268] Bad eraseblock 456 at 0x000003900000
144 +[ 1.021533] Bad eraseblock 502 at 0x000003ec0000
145 +[ 1.034940] Bad eraseblock 540 at 0x000004380000
146 +[ 1.050681] Bad eraseblock 588 at 0x000004980000
147 +[ 1.107262] Bad eraseblock 810 at 0x000006540000
148 +[ 1.129339] Bad eraseblock 885 at 0x000006ea0000
149 +[ 1.166421] 7 fixed-partitions partitions found on MTD device MT7621-NAND
150 +[ 1.173195] Creating 7 MTD partitions on "MT7621-NAND":
151 +[ 1.178405] 0x000000000000-0x000000080000 : "uboot"
152 +[ 1.184240] 0x000000080000-0x0000000c0000 : "uboot_env"
153 +[ 1.190298] 0x0000000c0000-0x000000100000 : "factory"
154 +[ 1.196219] 0x000000100000-0x000000140000 : "s_env"
155 +[ 1.201900] 0x000000140000-0x000000180000 : "devinfo"
156 +[ 1.207850] 0x000000180000-0x000002980000 : "firmware1"
157 +[ 1.216116] 0x000002980000-0x000005180000 : "firmware2"
158 +[ 1.223224] 1 uboot-env-boot_part partitions found on MTD device firmware2
159 +[ 1.230090] 0x000002980000-0x000005180000 : "firmware"
160 +[ 1.784436] 2 uimage-fw partitions found on MTD device firmware
161 +[ 1.790355] 0x000002980000-0x000002b60000 : "kernel"
162 +[ 1.796251] 0x000002b60000-0x000005180000 : "ubi"
163 +[ 1.802130] [mtk_nand] probe successfully!
164 +[ 1.806957] Signature matched and data read!
165 +[ 1.811205] load_fact_bbt success 1023
166 +[ 1.815701] libphy: Fixed MDIO Bus: probed
167 +[ 1.885315] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
168 +[ 1.893332] mtd_read_prop_mac: hw_mac_addr=XX:YY:ZZ:00:11:33
169 +[ 1.899142] libphy: mdio: probed
170 +[ 3.302014] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
171 +[ 3.308669] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
172 +[ 3.319426] NET: Registered protocol family 10
173 +[ 3.325219] Segment Routing with IPv6
174 +[ 3.328949] NET: Registered protocol family 17
175 +[ 3.333457] 8021q: 802.1Q VLAN Support v1.8
176 +[ 3.340506] UBI: auto-attach mtd9
177 +[ 3.343893] ubi0: attaching mtd9
178 +[ 3.363286] UBI: EOF marker found, PEBs from 15 will be erased
179 +[ 3.369474] ubi0: scanning is finished
180 +[ 3.411360] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 269 LEBs
181 +[ 3.418731] ubi0: attached mtd9 (name "ubi", size 38 MiB)
182 +[ 3.424164] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
183 +[ 3.431006] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
184 +[ 3.437780] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
185 +[ 3.444725] ubi0: good PEBs: 298, bad PEBs: 7, corrupted PEBs: 0
186 +[ 3.450701] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
187 +[ 3.457906] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1203044710
188 +[ 3.467015] ubi0: available PEBs: 0, total reserved PEBs: 298, PEBs reserved for bad PEB handling: 13
189 +[ 3.476230] ubi0: background thread "ubi_bgt0d" started, PID 359
190 +[ 3.477972] block ubiblock0_0: created from ubi0:0(rootfs)
191 +[ 3.487716] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
192 +[ 3.494673] hctosys: unable to open rtc device (rtc0)
193 +[ 3.519930] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
194 +[ 3.527684] Freeing unused kernel memory: 268K
195 +[ 3.532122] This architecture does not have kernel memory protection.
196 +[ 4.017012] init: Console is alive
197 +[ 4.020616] init: - watchdog -
198 +[ 4.354210] kmodloader: loading kernel modules from /etc/modules-boot.d/*
199 +[ 4.443714] usbcore: registered new interface driver usbfs
200 +[ 4.449260] usbcore: registered new interface driver hub
201 +[ 4.454739] usbcore: registered new device driver usb
202 +[ 4.467426] SCSI subsystem initialized
203 +[ 4.480878] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
204 +[ 4.489588] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
205 +[ 4.498507] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
206 +[ 4.503843] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
207 +[ 4.523114] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
208 +[ 4.532283] xhci-mtk 1e1c0000.xhci: irq 19, io mem 0x1e1c0000
209 +[ 4.538971] hub 1-0:1.0: USB hub found
210 +[ 4.542796] hub 1-0:1.0: 2 ports detected
211 +[ 4.547400] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
212 +[ 4.552722] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
213 +[ 4.560210] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
214 +[ 4.560493] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
215 +[ 4.566816] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
216 +[ 4.581320] hub 2-0:1.0: USB hub found
217 +[ 4.585161] hub 2-0:1.0: 1 port detected
218 +[ 4.593449] usbcore: registered new interface driver usb-storage
219 +[ 4.599693] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
220 +[ 4.623240] init: - preinit -
221 +[ 5.073028] usb 1-2: new high-speed USB device number 2 using xhci-mtk
222 +[ 5.221107] mtk_soc_eth 1e100000.ethernet: PPE started
223 +[ 5.255985] usb-storage 1-2:1.0: USB Mass Storage device detected
224 +[ 5.262845] scsi host0: usb-storage 1-2:1.0
339 339  Press the [f] key and hit [enter] to enter failsafe mode
340 340  Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
341 -[ 10.582466] UBIFS (ubi0:1): default file-system created
342 -[ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
343 -[ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
344 -[ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
345 -[ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
346 -[ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
347 -[ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
348 -[ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
349 -[ 10.756981] mount_root: switching to ubifs overlay
350 -[ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
351 -[ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
352 -[ 10.876085] procd: - early -
353 -[ 10.879061] procd: - watchdog -
354 -[ 11.550737] procd: - watchdog -
355 -[ 11.554202] procd: - ubus -
356 -[ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
357 -[ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
358 -[ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
359 -[ 11.625387] procd: - init -
227 +[ 5.312718] random: procd: uninitialized urandom read (4 bytes read)
228 +[ 6.273781] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
229 +[ 6.283479] sd 0:0:0:0: [sda] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB)
230 +[ 6.291556] sd 0:0:0:0: [sda] Write Protect is off
231 +[ 6.297040] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
232 +[ 6.313010] sd 0:0:0:0: [sda] Attached SCSI removable disk
233 +[ 8.450677] UBIFS (ubi0:1): default file-system created
234 +[ 8.457372] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 474
235 +[ 8.568317] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
236 +[ 8.576154] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
237 +[ 8.586040] UBIFS (ubi0:1): FS size: 32886784 bytes (31 MiB, 259 LEBs), journal size 1650688 bytes (1 MiB, 13 LEBs)
238 +[ 8.596442] UBIFS (ubi0:1): reserved for root: 1553323 bytes (1516 KiB)
239 +[ 8.603051] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID D42C5178-C937-4CB4-94EE-0031FFF6550A, small LPT model
240 +[ 8.617248] mount_root: overlay filesystem has not been fully initialized yet
241 +[ 8.624849] mount_root: switching to ubifs overlay
242 +[ 8.647505] urandom-seed: Seed file not found (/etc/urandom.seed)
243 +[ 8.728797] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
244 +[ 8.743450] procd: - early -
245 +[ 8.746426] procd: - watchdog -
246 +[ 9.403107] procd: - watchdog -
247 +[ 9.406559] procd: - ubus -
248 +[ 9.457080] random: ubusd: uninitialized urandom read (4 bytes read)
249 +[ 9.464255] random: ubusd: uninitialized urandom read (4 bytes read)
250 +[ 9.470985] random: ubusd: uninitialized urandom read (4 bytes read)
251 +[ 9.478186] procd: - init -
360 360  Please press Enter to activate this console.
361 -[ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
362 -[ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
363 -[ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
364 -[ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
365 -[ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
366 -[ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
367 -[ 12.127574] urngd: v1.0.0 started.
368 -[ 12.145053] xt_time: kernel timezone is -0000
369 -[ 12.214244] bus=0x1, slot = 0x0, irq=0x0
370 -[ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
371 -[ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
372 -[ 12.241178]
373 -[ 12.266469] random: crng init done
374 -[ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
375 -[ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
376 -[ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
377 -+ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
378 -[ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
379 -[ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
380 -[ 20.161193]
381 -[ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
382 -[ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
383 -[ 27.852570] PPP generic driver version 2.4.2
384 -[ 27.858358] NET: Registered protocol family 24
385 -[ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
386 -[ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
387 -[ 41.287935] br-lan: port 1(eth0.2) entered blocking state
388 -[ 41.293420] br-lan: port 1(eth0.2) entered disabled state
389 -[ 41.299522] device eth0.2 entered promiscuous mode
390 -[ 41.304484] device eth0 entered promiscuous mode
391 -[ 41.311947] br-lan: port 1(eth0.2) entered blocking state
392 -[ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
393 -[ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
394 -[ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
253 +[ 9.714720] kmodloader: loading kernel modules from /etc/modules.d/*
254 +[ 9.724486] ip6_tables: (C) 2000-2006 Netfilter Core Team
255 +[ 9.738298] ip_tables: (C) 2000-2006 Netfilter Core Team
256 +[ 9.749820] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
257 +[ 9.790837] xt_time: kernel timezone is -0000
258 +[ 9.801201] PPP generic driver version 2.4.2
259 +[ 9.806822] NET: Registered protocol family 24
260 +[ 9.813785] kmodloader: done loading kernel modules from /etc/modules.d/*
261 +[ 10.951148] urandom_read: 5 callbacks suppressed
262 +[ 10.951161] random: jshn: uninitialized urandom read (4 bytes read)
263 +[ 16.501675] mtk_soc_eth 1e100000.ethernet: PPE started
264 +[ 16.512395] br-lan: port 1(eth0.2) entered blocking state
265 +[ 16.517965] br-lan: port 1(eth0.2) entered disabled state
266 +[ 16.523873] device eth0.2 entered promiscuous mode
267 +[ 16.528744] device eth0 entered promiscuous mode
268 +[ 16.537326] br-lan: port 1(eth0.2) entered blocking state
269 +[ 16.542760] br-lan: port 1(eth0.2) entered forwarding state
270 +[ 16.548768] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
271 +[ 17.553672] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
272 +[ 21.883773] random: crng init done
273 +
395 395  
396 396  
276 +BusyBox v1.30.1 () built-in shell (ash)
397 397  
398 -BusyBox v1.31.0 () built-in shell (ash)
399 -
400 400   _______ ________ __
401 401   | |.-----.-----.-----.| | | |.----.| |_
402 402   | - || _ | -__| || | | || _|| _|
... ... @@ -403,7 +403,7 @@
403 403   |_______|| __|_____|__|__||________||__| |____|
404 404   |__| W I R E L E S S F R E E D O M
405 405   -----------------------------------------------------
406 - OpenWrt SNAPSHOT, r10942-9bebafcb5d
284 + OpenWrt SNAPSHOT, r9254+122-3b40121530
407 407   -----------------------------------------------------
408 408  === WARNING! =====================================
409 409  There is no root password defined on this device!
... ... @@ -410,344 +410,15 @@
410 410  Use the "passwd" command to set up a new password
411 411  in order to prevent unauthorized SSH logins.
412 412  --------------------------------------------------
413 -root@OpenWrt:/# ifconfig -a
414 -br-lan Link encap:Ethernet HWaddr
415 - inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
416 - inet6 addr: fde0:62db:5134::1/60 Scope:Global
417 - inet6 addr: fe80::/64 Scope:Link
418 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
419 - RX packets:41 errors:0 dropped:0 overruns:0 frame:0
420 - TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
421 - collisions:0 txqueuelen:1000
422 - RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
423 -
424 -eth0 Link encap:Ethernet HWaddr
425 - inet6 addr: fe80::/64 Scope:Link
426 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
427 - RX packets:102 errors:0 dropped:0 overruns:0 frame:0
428 - TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
429 - collisions:0 txqueuelen:1000
430 - RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
431 - Interrupt:21
432 -
433 -eth0.1 Link encap:Ethernet HWaddr
434 - inet6 addr: fe80::/64 Scope:Link
435 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
436 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0
437 - TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
438 - collisions:0 txqueuelen:1000
439 - RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
440 -
441 -eth0.2 Link encap:Ethernet HWaddr
442 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
443 - RX packets:41 errors:0 dropped:0 overruns:0 frame:0
444 - TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
445 - collisions:0 txqueuelen:1000
446 - RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
447 -
448 -lo Link encap:Local Loopback
449 - inet addr:127.0.0.1 Mask:255.0.0.0
450 - inet6 addr: ::1/128 Scope:Host
451 - UP LOOPBACK RUNNING MTU:65536 Metric:1
452 - RX packets:28 errors:0 dropped:0 overruns:0 frame:0
453 - TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
454 - collisions:0 txqueuelen:1000
455 - RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
456 -
457 -wlan0 Link encap:Ethernet HWaddr
458 - BROADCAST MULTICAST MTU:1500 Metric:1
459 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0
460 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
461 - collisions:0 txqueuelen:1000
462 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
463 -
464 -wlan1 Link encap:Ethernet HWaddr
465 - BROADCAST MULTICAST MTU:1500 Metric:1
466 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0
467 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
468 - collisions:0 txqueuelen:1000
469 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
470 -
471 -root@OpenWrt:/# ls -l
472 -drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
473 -drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
474 -drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
475 --rwxr-xr-x 1 root root 78 Dec 30 2018 init
476 -drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
477 -drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
478 -drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
479 -dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
480 -drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
481 -drwxr-xr-x 2 root root 3 Sep 1 06:04 root
482 -drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
483 -dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
484 -drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
485 -drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
486 -lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
487 -drwxr-xr-x 2 root root 3 Sep 1 06:04 www
488 -root@OpenWrt:/# ps
489 - PID USER VSZ STAT COMMAND
490 - 1 root 1576 S /sbin/procd
491 - 2 root 0 SW [kthreadd]
492 - 3 root 0 IW [kworker/0:0]
493 - 4 root 0 IW< [kworker/0:0H]
494 - 5 root 0 IW [kworker/u8:0]
495 - 6 root 0 IW< [mm_percpu_wq]
496 - 7 root 0 SW [ksoftirqd/0]
497 - 8 root 0 IW [rcu_sched]
498 - 9 root 0 IW [rcu_bh]
499 - 10 root 0 SW [migration/0]
500 - 11 root 0 SW [cpuhp/0]
501 - 12 root 0 SW [cpuhp/1]
502 - 13 root 0 SW [migration/1]
503 - 14 root 0 SW [ksoftirqd/1]
504 - 16 root 0 IW< [kworker/1:0H]
505 - 17 root 0 SW [cpuhp/2]
506 - 18 root 0 SW [migration/2]
507 - 19 root 0 SW [ksoftirqd/2]
508 - 21 root 0 IW< [kworker/2:0H]
509 - 22 root 0 SW [cpuhp/3]
510 - 23 root 0 SW [migration/3]
511 - 24 root 0 SW [ksoftirqd/3]
512 - 25 root 0 IW [kworker/3:0]
513 - 26 root 0 IW< [kworker/3:0H]
514 - 27 root 0 IW< [netns]
515 - 41 root 0 IW [kworker/u8:3]
516 - 68 root 0 IW [kworker/3:1]
517 - 69 root 0 IW [kworker/2:1]
518 - 138 root 0 IW [kworker/1:1]
519 - 139 root 0 SW [oom_reaper]
520 - 140 root 0 IW< [writeback]
521 - 142 root 0 SW [kcompactd0]
522 - 143 root 0 IW< [crypto]
523 - 145 root 0 IW< [kblockd]
524 - 175 root 0 IW< [watchdogd]
525 - 199 root 0 SW [kswapd0]
526 - 268 root 0 IW< [pencrypt]
527 - 270 root 0 IW< [pdecrypt]
528 - 366 root 0 IW< [ipv6_addrconf]
529 - 378 root 0 SW [ubi_bgt0d]
530 - 383 root 0 IW< [kworker/0:1H]
531 - 384 root 0 IW< [kworker/2:1H]
532 - 385 root 0 IW [kworker/2:2]
533 - 386 root 0 IW< [kworker/3:1H]
534 - 389 root 0 IW< [kworker/1:1H]
535 - 429 root 0 IW [kworker/0:2]
536 - 437 root 0 IW [kworker/1:2]
537 - 453 root 0 SW [scsi_eh_0]
538 - 454 root 0 IW< [scsi_tmf_0]
539 - 455 root 0 SW [usb-storage]
540 - 496 root 0 SW [ubifs_bgt0_1]
541 - 573 root 1220 S /sbin/ubusd
542 - 574 root 1220 S /bin/ash --login
543 - 591 root 1028 S /sbin/urngd
544 - 660 root 0 IW< [cfg80211]
545 - 1012 root 1248 S /sbin/logd -S 64
546 - 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
547 - 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
548 - 1168 root 1700 S /sbin/netifd
549 - 1204 root 1448 S /usr/sbin/odhcpd
550 - 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
551 - 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
552 - 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
553 - 1720 root 1212 R ps
554 -root@OpenWrt:/etc# ping www.google.co
555 -PING www.google.co (): 56 data bytes
556 -64 bytes from : seq=0 ttl=52 time=4.718 ms
557 -^C
558 ---- www.google.co ping statistics ---
559 -1 packets transmitted, 1 packets received, 0% packet loss
560 -round-trip min/avg/max = 4.718/4.718/4.718 ms
561 -root@OpenWrt:/etc# ping www.google.com
562 -PING www.google.com (): 56 data bytes
563 -64 bytes from : seq=0 ttl=47 time=4.927 ms
564 -64 bytes from : seq=1 ttl=47 time=4.687 ms
565 -^C
566 ---- www.google.com ping statistics ---
567 -2 packets transmitted, 2 packets received, 0% packet loss
568 -round-trip min/avg/max = 4.687/4.807/4.927 ms
569 -root@OpenWrt:/etc# opkg update
570 -Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
571 -Updated list of available packages in /var/opkg-lists/openwrt_core
572 -Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
573 -Signature check passed.
574 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
575 -Updated list of available packages in /var/opkg-lists/openwrt_base
576 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
577 -Signature check passed.
578 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
579 -Updated list of available packages in /var/opkg-lists/openwrt_luci
580 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
581 -Signature check passed.
582 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
583 -Updated list of available packages in /var/opkg-lists/openwrt_packages
584 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
585 -Signature check passed.
586 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
587 -Updated list of available packages in /var/opkg-lists/openwrt_routing
588 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
589 -Signature check passed.
590 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
591 -Updated list of available packages in /var/opkg-lists/openwrt_telephony
592 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
593 -Signature check passed.
594 -root@OpenWrt:/etc# opkg install luci
595 -Installing luci (git-19.241.65047-dffe9ca-1) to root...
596 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
597 -Installing uhttpd (2019-08-17-6b03f960-3) to root...
598 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
599 -Installing liblua5.1.5 (5.1.5-5) to root...
600 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
601 -Installing lua (5.1.5-5) to root...
602 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
603 -Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
604 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
605 -Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
606 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
607 -Installing rpcd (2019-06-05-89bfaa42-3) to root...
608 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
609 -Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
610 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
611 -Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
612 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
613 -Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
614 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
615 -Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
616 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
617 -Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
618 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
619 -Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
620 -Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
621 -Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
622 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
623 -Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
624 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
625 -Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
626 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
627 -Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
628 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
629 -Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
630 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
631 -Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
632 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
633 -Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
634 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
635 -Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
636 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
637 -Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
638 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
639 -Installing rpcd-mod-rrdns (20170710) to root...
640 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
641 -Configuring liblucihttp0.
642 -Configuring luci-app-opkg.
643 -Configuring rpcd.
644 -Configuring liblua5.1.5.
645 -Configuring luci-lib-ip.
646 -Configuring libubus-lua.
647 -Configuring libiwinfo-lua.
648 -Configuring lua.
649 -Configuring luci-lib-nixio.
650 -Configuring luci-lib-jsonc.
651 -Configuring liblucihttp-lua.
652 -Configuring luci-base.
653 -Configuring luci-mod-system.
654 -Configuring luci-theme-bootstrap.
655 -Configuring luci-mod-status.
656 -Configuring luci-app-firewall.
657 -Configuring luci-proto-ppp.
658 -Configuring luci-mod-network.
659 -Configuring luci-mod-admin-full.
660 -Configuring luci-proto-ipv6.
661 -Configuring uhttpd.
662 -Configuring rpcd-mod-rrdns.
663 -Configuring luci.
664 -root@OpenWrt:/etc# df -h
291 +root@OpenWrt:/# free
292 + total used free shared buff/cache available
293 +Mem: 253572 23256 224316 60 6000 203516
294 +Swap: 0 0 0
295 +root@OpenWrt:/# df -h
665 665  Filesystem Size Used Available Use% Mounted on
666 -/dev/root 2.8M 2.8M 0 100% /rom
667 -tmpfs 123.5M 764.0K 122.8M 1% /tmp
668 -/dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
669 -overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
297 +/dev/root 1.5M 1.5M 0 100% /rom
298 +tmpfs 123.8M 60.0K 123.8M 0% /tmp
299 +/dev/ubi0_1 28.3M 36.0K 26.8M 0% /overlay
300 +overlayfs:/overlay 28.3M 36.0K 26.8M 0% /
670 670  tmpfs 512.0K 0 512.0K 0% /dev
671 -root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
672 -[ 2075.973245] br-lan: port 2(wlan0) entered blocking state
673 -[ 2075.978551] br-lan: port 2(wlan0) entered disabled state
674 -[ 2075.984368] device wlan0 entered promiscuous mode
675 -[ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
676 -[ 2087.171890] br-lan: port 2(wlan0) entered blocking state
677 -[ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
678 -[ 2096.494533] device wlan0 left promiscuous mode
679 -[ 2096.499322] br-lan: port 2(wlan0) entered disabled state
680 -[ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
681 -[ 2097.393568] br-lan: port 2(wlan0) entered blocking state
682 -[ 2097.398924] br-lan: port 2(wlan0) entered disabled state
683 -[ 2097.404922] device wlan0 entered promiscuous mode
684 -[ 2097.409972] br-lan: port 2(wlan0) entered blocking state
685 -[ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
686 -[ 2097.749351] br-lan: port 2(wlan0) entered disabled state
687 -[ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
688 -[ 2107.960561] br-lan: port 2(wlan0) entered blocking state
689 -[ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
690 -[ 2117.964353] device wlan0 left promiscuous mode
691 -[ 2117.969130] br-lan: port 2(wlan0) entered disabled state
692 -[ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
693 -[ 2118.792816] br-lan: port 2(wlan0) entered blocking state
694 -[ 2118.798173] br-lan: port 2(wlan0) entered disabled state
695 -[ 2118.804171] device wlan0 entered promiscuous mode
696 -[ 2118.809362] br-lan: port 2(wlan0) entered blocking state
697 -[ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
698 -[ 2119.189273] br-lan: port 2(wlan0) entered disabled state
699 -[ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
700 -[ 2130.264811] br-lan: port 2(wlan0) entered blocking state
701 -[ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
702 -[ 2245.748473] device wlan0 left promiscuous mode
703 -[ 2245.753145] br-lan: port 2(wlan0) entered disabled state
704 -[ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
705 -[ 2246.546273] br-lan: port 2(wlan0) entered blocking state
706 -[ 2246.551680] br-lan: port 2(wlan0) entered disabled state
707 -[ 2246.557667] device wlan0 entered promiscuous mode
708 -[ 2246.562855] br-lan: port 2(wlan0) entered blocking state
709 -[ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
710 -[ 2246.838430] br-lan: port 2(wlan0) entered disabled state
711 -[ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
712 -[ 2246.954850] br-lan: port 2(wlan1) entered blocking state
713 -[ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
714 -
715 -root@OpenWrt:/etc#
716 -root@OpenWrt:/etc# uci show wireless
717 -wireless.radio0=wifi-device
718 -wireless.radio0.type='mac80211'
719 -wireless.radio0.channel='11'
720 -wireless.radio0.hwmode='11g'
721 -wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
722 -wireless.radio0.country='00'
723 -wireless.radio0.legacy_rates='1'
724 -wireless.radio0.htmode='HT20'
725 -wireless.default_radio0=wifi-iface
726 -wireless.default_radio0.device='radio0'
727 -wireless.default_radio0.network='lan'
728 -wireless.default_radio0.mode='ap'
729 -wireless.default_radio0.encryption='psk2'
730 -wireless.default_radio0.key='qwerty1234'
731 -wireless.default_radio0.ssid='asdf'
732 -wireless.radio1=wifi-device
733 -wireless.radio1.type='mac80211'
734 -wireless.radio1.channel='36'
735 -wireless.radio1.hwmode='11a'
736 -wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
737 -wireless.radio1.htmode='VHT80'
738 -wireless.radio1.__toggle='Enable'
739 -wireless.radio1.country='00'
740 -wireless.radio1.legacy_rates='1'
741 -wireless.default_radio1=wifi-iface
742 -wireless.default_radio1.device='radio1'
743 -wireless.default_radio1.network='lan'
744 -wireless.default_radio1.mode='ap'
745 -wireless.default_radio1.ssid='asdf'
746 -wireless.default_radio1.encryption='psk2'
747 -wireless.default_radio1.key='qwerty1234'
748 -root@OpenWrt:/etc#
749 749  {{/code}}
750 -
751 -Firmware:
752 -
753 -./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin
1567332570723-651.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.CodePowered
Size
... ... @@ -1,1 +1,0 @@
1 -166.8 KB
Content
openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.CodePowered
Size
... ... @@ -1,1 +1,0 @@
1 -5.6 MB
Content