Last modified by Leon Poon on 2021/07/16 18:40
From version 31.1
edited by Leon Poon
on 2020/09/10 14:22
Change comment: There is no comment for this version
To version 29.1
edited by Leon Poon
on 2020/09/10 13:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -11,9 +11,9 @@
11 11  
12 12  The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.
13 13  
14 -**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the squashfs.bin flashed, then opkg update and opkg install luci.
14 +How to flash:
15 15  
16 -How to flash if your router currently has stock Linksys firmware:
16 +If your router currently has stock Linksys firmware:
17 17  
18 18  1. Flash the "**initramfs-factory.img**" via Linksys UI. Wait for it to start to reboot.
19 19  1. Configure your computer to have ip in 192.168.1.0/24 subnet but NOT 192.168.1.1. (so, use 192.168.1.2.) Start ping to 192.168.1.1.
... ... @@ -32,7 +32,7 @@
32 32  Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.04:
33 33  
34 34  * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
35 -* **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
35 +* **Known issue**: 2.4Ghz wifi performance is really bad. 5Ghz seem ok though.
36 36  
37 37  = 18.x =
38 38