Last modified by Leon Poon on 2021/07/16 18:40
From version 43.1
edited by Leon Poon
on 2021/04/12 12:12
Change comment: There is no comment for this version
To version 41.1
edited by Leon Poon
on 2020/12/10 08:50
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -5,26 +5,20 @@
5 5  
6 6  = 19.07.x =
7 7  
8 -Openwrt 19.07.7 for EA8100 is here!
8 +Openwrt 19.07.4 for EA8100 is here!
9 9  
10 -Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
10 +Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.04:
11 11  
12 12  * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
13 13  * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
14 14  
15 -UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi! Follow these instructions:
15 +UPDATED 2020-12-10 the 19.07.04 builds now includes LuCi! Follow these instructions:
16 16  
17 -1. Grab initramfs-factory.img from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]] and flash it via Linksys UI.
17 +1. Grab initramfs-factory.img from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]] and flash it via Linksys UI.
18 18  1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. Do NOT configure yet! It's not ready.
19 -1. Then grab squashfs-sysupgrade.bin from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin]] and flash it via LuCi
19 +1. Then grab squashfs-sysupgrade.bin from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin]] and flash it via LuCi
20 20  1. Wait for it to reboot. Now you can configure!
21 21  
22 -For kernel modules, replace with this in your opkg distfeeds.conf:
23 -
24 -{{code language="none"}}
25 -src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
26 -{{/code}}
27 -
28 28  If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
29 29  
30 30  Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
XWiki.XWikiComments[0]
Date
... ... @@ -1,1 +1,1 @@
1 -2019-05-09 16:42:45.0
1 +2019-05-10 00:42:45.0