Last modified by Leon Poon on 2021/07/16 18:40
From version 47.1
edited by Leon Poon
on 2021/04/13 11:58
Change comment: There is no comment for this version
To version 52.1
edited by Leon Poon
on 2021/06/27 04:14
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,7 +2,15 @@
2 2  
3 3  If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4 4  
5 +(% class="wikigeneratedid" %)
6 += 21.02.x =
5 5  
8 +Thanks to [[this patch>>https://github.com/openwrt/openwrt/commit/97df795b78dc572ea2ec105ccbf8af27cc4b4d8e]], EA8100 is now supported from v21.02.
9 +
10 +21.02 release is currently at RC3. You can get it from [[openwrt firmware selector>>https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ramips%2Fmt7621&id=linksys_ea8100-v1]] page.
11 +
12 +Both 2.4Ghz and 5Ghz wifi are working fine.
13 +
6 6  = 19.07.x =
7 7  
8 8  Openwrt 19.07.7 for EA8100 is here!
... ... @@ -12,8 +12,15 @@
12 12  * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
13 13  * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
14 14  
15 -UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi! Follow these instructions (always use a PC connected via wired ethernet):
23 +UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
16 16  
25 +(% class="box warningmessage" %)
26 +(((
27 +Always use a PC connected to the device via wired ethernet for flashing firmwares.
28 +)))
29 +
30 +Follow these instructions:
31 +
17 17  1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
18 18  1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
19 19  1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
... ... @@ -20,7 +20,7 @@
20 20  1. Flash **##squashfs-sysupgrade.bin##** via LuCi
21 21  1. Wait for it to reboot. Now you can configure!
22 22  
23 -For kernel modules, replace with this in your ##/etc/opkg/distfeeds.conf##:
38 +For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
24 24  
25 25  {{code language="none"}}
26 26  src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages