Last modified by Leon Poon on 2021/07/16 18:40
From version 52.1
edited by Leon Poon
on 2021/06/27 04:14
Change comment: There is no comment for this version
To version 43.1
edited by Leon Poon
on 2021/04/12 12:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,15 +2,7 @@
2 2  
3 3  If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4 4  
5 -(% class="wikigeneratedid" %)
6 -= 21.02.x =
7 7  
8 -Thanks to [[this patch>>https://github.com/openwrt/openwrt/commit/97df795b78dc572ea2ec105ccbf8af27cc4b4d8e]], EA8100 is now supported from v21.02.
9 -
10 -21.02 release is currently at RC3. You can get it from [[openwrt firmware selector>>https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ramips%2Fmt7621&id=linksys_ea8100-v1]] page.
11 -
12 -Both 2.4Ghz and 5Ghz wifi are working fine.
13 -
14 14  = 19.07.x =
15 15  
16 16  Openwrt 19.07.7 for EA8100 is here!
... ... @@ -20,22 +20,14 @@
20 20  * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
21 21  * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
22 22  
23 -UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
15 +UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi! Follow these instructions:
24 24  
25 -(% class="box warningmessage" %)
26 -(((
27 -Always use a PC connected to the device via wired ethernet for flashing firmwares.
28 -)))
29 -
30 -Follow these instructions:
31 -
32 -1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
33 -1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
34 -1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
35 -1. Flash **##squashfs-sysupgrade.bin##** via LuCi
17 +1. Grab initramfs-factory.img from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]] and flash it via Linksys UI.
18 +1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. Do NOT configure yet! It's not ready.
19 +1. Then grab squashfs-sysupgrade.bin from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin]] and flash it via LuCi
36 36  1. Wait for it to reboot. Now you can configure!
37 37  
38 -For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
22 +For kernel modules, replace with this in your opkg distfeeds.conf:
39 39  
40 40  {{code language="none"}}
41 41  src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages