Last modified by Leon Poon on 2021/07/16 18:40
From version 53.1
edited by Leon Poon
on 2021/06/27 04:45
Change comment: There is no comment for this version
To version 50.1
edited by Leon Poon
on 2021/04/13 12:00
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -2,14 +2,7 @@
2 2  
3 3  If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4 4  
5 -= 21.02.x =
6 6  
7 -Thanks to [[this patch>>https://github.com/openwrt/openwrt/commit/97df795b78dc572ea2ec105ccbf8af27cc4b4d8e]], EA8100 is now supported from openwrt 21.02.
8 -
9 -The 21.02 release is currently at RC3. You can get it from [[openwrt firmware selector>>https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ramips%2Fmt7621&id=linksys_ea8100-v1]] page.
10 -
11 -Both 2.4Ghz and 5Ghz wifi are working fine.
12 -
13 13  = 19.07.x =
14 14  
15 15  Openwrt 19.07.7 for EA8100 is here!
... ... @@ -19,15 +19,13 @@
19 19  * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
20 20  * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
21 21  
22 -UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
15 +UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi! Follow these instructions:
23 23  
24 24  (% class="box warningmessage" %)
25 25  (((
26 -Always use a PC connected to the device via wired ethernet for flashing firmwares.
19 +Always use a PC connected to the device via wired ethernet.
27 27  )))
28 28  
29 -Follow these instructions:
30 -
31 31  1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
32 32  1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
33 33  1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.