Last modified by Leon Poon on 2021/07/16 18:40
From version 58.1
edited by Leon Poon
on 2021/07/16 18:40
Change comment: There is no comment for this version
To version 8.1
edited by Leon Poon
on 2019/09/01 09:26
Change comment: Uploaded new attachment "openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin", version 1.1

Summary

Details

Page properties
Content
... ... @@ -1,184 +1,33 @@
1 1  switch0: port 0 = wan, port 1,2,3,4 = lan
2 2  
3 -If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4 4  
5 -= 21.02.x =
4 +[[https:~~/~~/github.com/LeonPoon/openwrt/compare/master...master-linksys_ea8100>>https://github.com/LeonPoon/openwrt/compare/master...master-linksys_ea8100]]
6 6  
7 -Thanks to [[this patch>>https://github.com/openwrt/openwrt/commit/97df795b78dc572ea2ec105ccbf8af27cc4b4d8e]], EA8100 is now supported from openwrt 21.02.
6 +b90086cc98a15a2774382b691f1249f4ad11a1c7 Download (no wifi):
8 8  
9 -The 21.02 release is currently at RC3. You can get it from [[openwrt firmware selector>>https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ramips%2Fmt7621&id=linksys_ea8100-v1]] page.
8 +* [[initramfs-kernel.bin>>attach:Linksys EA8100.Openwrt for Linksys EA8100.WebHome@openwrt-ramips-mt7621-ea8100-initramfs-kernel.bin]]
9 +* [[squashfs-sysupgrade.bin>>attach:Linksys EA8100.Openwrt for Linksys EA8100.WebHome@openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin]] (accepted as upgrade in factory UI)
10 10  
11 -Both 2.4Ghz and 5Ghz wifi are working fine.
12 -
13 -If you are already on 19.07, please do not sysupgrade with 21.02 sysupgrade.bin, because sysupgrade.bin format in 21.02 is not supported by 19.07 sysupgrade utility.
14 -
15 -21.02 images:
16 -
17 -{{code language="none"}}
18 -openwrt-21.02.0-rc3-ramips-mt7621-linksys_ea8100-v1-initramfs-kernel.bin: u-boot legacy uImage, MIPS OpenWrt Linux-5.4.124, Linux/MIPS, OS Kernel Image (Not compressed), 4912189 bytes, Sun Jun 13 22:02:19 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0x9C4276B9, Data CRC: 0xBC5373AC
19 -openwrt-21.02.0-rc3-ramips-mt7621-linksys_ea8100-v1-squashfs-factory.bin: u-boot legacy uImage, MIPS OpenWrt Linux-5.4.124, Linux/MIPS, OS Kernel Image (Not compressed), 2357363 bytes, Sun Jun 13 22:02:19 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0xAC8B8E31, Data CRC: 0xC42A191A
20 -openwrt-21.02.0-rc3-ramips-mt7621-linksys_ea8100-v1-squashfs-sysupgrade.bin: POSIX tar archive (GNU)
21 -{{/code}}
22 -
23 -(% class="wikigeneratedid" %)
24 -19.07:
25 -
26 -{{code language="none"}}
27 -openwrt-ramips-mt7621-ea8100-initramfs-factory.img: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 5049994 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0x9EAE22DC, Data CRC: 0x739C919A
28 -openwrt-ramips-mt7621-ea8100-initramfs-kernel.bin: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 5049994 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0x9EAE22DC, Data CRC: 0x739C919A
29 -openwrt-ramips-mt7621-ea8100-squashfs-factory.img: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 2012291 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0xD210527A, Data CRC: 0x404E16F6
30 -openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 2012291 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0xD210527A, Data CRC: 0x404E16F6
31 -{{/code}}
32 -
33 -Flashing 21.02 squashfs-sysupgrade.bin using sysupgrade in 19.07 will soft brick your router. (Sysupgrade will likely reject the image anyway, and you will have to use force flag if you really want to do it.)
34 -
35 -If you insist, force flashing the 21.02 squashfs-factory.bin should allow you to succeed in the upgrade. (Not tested.)
36 -
37 -= 19.07.x =
38 -
39 -Openwrt 19.07.7 for EA8100 is here!
40 -
41 -Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
42 -
43 -* Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
44 -* **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
45 -
46 -UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
47 -
48 -(% class="box warningmessage" %)
49 -(((
50 -Always use a PC connected to the device via wired ethernet for flashing firmwares.
51 -)))
52 -
53 -Follow these instructions:
54 -
55 -1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
56 -1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
57 -1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
58 -1. Flash **##squashfs-sysupgrade.bin##** via LuCi
59 -1. Wait for it to reboot. Now you can configure!
60 -
61 -For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
62 -
63 -{{code language="none"}}
64 -src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
65 -{{/code}}
66 -
67 -If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
68 -
69 -Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
70 -
71 -{{warning}}
72 -Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
73 -{{/warning}}
74 -
75 ---**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
76 -
77 ---The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
78 -
79 ---How to flash if your router currently has stock Linksys firmware:--
80 -
81 -1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
82 -1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
83 -1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
84 -1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
85 -1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
86 -1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
87 -1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
88 -1. --Run: ##opkg update##--
89 -1. --Run: ##**opkg install luci**##--
90 -1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
91 -
92 -= 18.x =
93 -
94 -9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
95 -
96 -* [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
97 -* [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
98 -
99 -Note that sysupgrade to a newer image is not likely to work.
100 -
101 -(% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
102 -|[[image:1567332570723-651.png]]
103 -
104 104  Dmesg:
105 105  
106 106  {{code language="plain"}}
107 - 3: Boot system code via Flash (default).
108 - 4: Entr boot command line interface.
109 - 7: Load Boot Loader code then write to Flash via Serial.
110 - 9: Load Boot Loader code then write to Flash via TFTP. 4
111 -You choosed 2
112 - 0
14 +check env def auto_recovery no
15 +check env def auto_recovery yes
16 +check env def boot_part 1
17 +check env def boot_part_ready 3
18 +enabled:1, boot_part:2, boot_part_ready:3
19 +..nand read ret = 0x20000
20 +boot_count:1, next_record:4
21 +boot_count:1, next_record:4
113 113  
114 -
115 -2: System Load Linux Kernel then write to Flash via TFTP.
116 - Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
117 - Please Input new ones /or Ctrl-C to discard
118 - Input device IP () ==:
119 - Input server IP () ==:
120 - Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
121 - which kernel partition to update (1/2/3=both) (2) ==:3
122 -
123 - NetTxPacket = 0x8FFE3200
124 -
125 - KSEG1ADDR(NetTxPacket) = 0xAFFE3200
126 -
127 - NetLoop,call eth_halt !
128 -
129 - NetLoop,call eth_init !
130 -Trying Eth0 (10/100-M)
131 -
132 - Waitting for RX_DMA_BUSY status Start... done
133 -
134 -
135 - ETH_STATE_ACTIVE!!
136 -TFTP from server ; our IP address is
137 -Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
138 -
139 - TIMEOUT_COUNT=10,Load address: 0x80100000
140 -Loading: Got ARP REPLY, set server/gtwy eth addr ()
141 -Got it
142 -#################################################################
143 - #################################################################
144 - #################################################################
145 - #################################################################
146 - #################################################################
147 - #################################################################
148 - #################################################################
149 - #################################################################
150 - #################################################################
151 - #################################################################
152 - #################################################################
153 - #################################################################
154 - #################################################################
155 - #################################################################
156 - #################################################################
157 - #################################################################
158 - #################################################################
159 - ################################################
160 -done
161 -Bytes transferred = 5898496 (5a0100 hex)
162 -LoadAddr=80100000 NetBootFileXferSize= 005a0100
163 -ranand_erase: start:180000, len:20000
164 -..ranand_erase: start:1a0000, len:20000
165 -..ranand_erase: start:1c0000, len:20000
166 -...
167 -.(5192)offs=7471104 piece=0 piece_size=256 rc=0
168 -Done!
169 -ranand_erase: start:2980000, len:20000
170 -..ranand_erase: start:29a0000, len:20000
171 -..ranand_erase: start:29c0000, len:20000
172 -...
173 -.(5192)offs=49676288 piece=0 piece_size=256 rc=0
174 -Done!
175 -## Booting image at bc180000 ...
176 - Image Name: MIPS OpenWrt Linux-4.14.141
23 +3: System Boot system code via Flash.
24 +## Booting image at be980000 ...
25 + Image Name: MIPS OpenWrt Linux-4.14.101
177 177   Image Type: MIPS Linux Kernel Image (lzma compressed)
178 - Data Size: 2010110 Bytes = 1.9 MB
27 + Data Size: 1908285 Bytes = 1.8 MB
179 179   Load Address: 80001000
180 180   Entry Point: 80001000
181 -............................... Verifying Checksum ... OK
30 +.............................. Verifying Checksum ... OK
182 182   Uncompressing Kernel Image ... OK
183 183  No initrd
184 184  ## Transferring control to Linux (at address 80001000) ...
... ... @@ -186,7 +186,7 @@
186 186  
187 187  Starting kernel ...
188 188  
189 -[ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
38 +[ 0.000000] Linux version 4.14.101 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r9033-cbee2131d6)) #0 SMP Sat Feb 16 05:28:27 2019
190 190  [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
191 191  [ 0.000000] bootconsole [early0] enabled
192 192  [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
... ... @@ -205,16 +205,16 @@
205 205  [ 0.000000] Early memory node ranges
206 206  [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
207 207  [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
208 -[ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
209 -[ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
210 -[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
57 +[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x4a4 with crng_init=0
58 +[ 0.000000] percpu: Embedded 14 pages/cpu @8120f000 s26192 r8192 d22960 u57344
59 +[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024
211 211  [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
212 212  [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
213 213  [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
214 214  [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
215 -[ 0.000000] Writing ErrCtl register=0002c420
216 -[ 0.000000] Readback ErrCtl register=0002c420
217 -[ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
64 +[ 0.000000] Writing ErrCtl register=0002c42c
65 +[ 0.000000] Readback ErrCtl register=0002c42c
66 +[ 0.000000] Memory: 253304K/262144K available (4502K kernel code, 233K rwdata, 1000K rodata, 268K init, 248K bss, 8840K reserved, 0K cma-reserved, 0K highmem)
218 218  [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
219 219  [ 0.000000] Hierarchical RCU implementation.
220 220  [ 0.000000] NR_IRQS: 256
... ... @@ -222,244 +222,210 @@
222 222  [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
223 223  [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
224 224  [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
225 -[ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
226 -[ 0.073969] pid_max: default: 32768 minimum: 301
227 -[ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
228 -[ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
229 -[ 0.094340] Hierarchical SRCU implementation.
230 -[ 0.099495] smp: Bringing up secondary CPUs ...
231 -[ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
232 -[ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
233 -[ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
234 -[ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
235 -[ 0.164211] Synchronize counters for CPU 1: done.
236 -[ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
237 -[ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
238 -[ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
239 -[ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
240 -[ 0.255179] Synchronize counters for CPU 2: done.
241 -[ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
242 -[ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
243 -[ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
244 -[ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
245 -[ 0.340367] Synchronize counters for CPU 3: done.
246 -[ 0.370232] smp: Brought up 1 node, 4 CPUs
247 -[ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
248 -[ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
249 -[ 0.394408] pinctrl core: initialized pinctrl subsystem
250 -[ 0.401009] NET: Registered protocol family 16
251 -[ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
252 -[ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
253 -[ 0.725598] ***** Xtal 40MHz *****
254 -[ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
255 -[ 0.734049] Port 0 N_FTS = 1b102800
256 -[ 0.737517] Port 1 N_FTS = 1b102800
257 -[ 0.740963] Port 2 N_FTS = 1b102800
258 -[ 1.896358] PCIE2 no card, disable it(RST&CLK)
259 -[ 1.900719] -> 21007f2
260 -[ 1.903123] PCIE0 enabled
261 -[ 1.905712] PCIE1 enabled
262 -[ 1.908316] PCI host bridge /pcie@1e140000 ranges:
263 -[ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
264 -[ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
265 -[ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
266 -[ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
267 -[ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
268 -[ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
269 -[ 1.958178] PCI host bridge to bus 0000:00
270 -[ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
271 -[ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
272 -[ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
273 -[ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
274 -[ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
275 -[ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
276 -[ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
277 -[ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
278 -[ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
279 -[ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
280 -[ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
281 -[ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
282 -[ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
283 -[ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
284 -[ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
285 -[ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
286 -[ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
287 -[ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
288 -[ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
289 -[ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
290 -[ 2.100582] clocksource: Switched to clocksource GIC
291 -[ 2.107275] NET: Registered protocol family 2
292 -[ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
293 -[ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
294 -[ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
295 -[ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
296 -[ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
297 -[ 2.144212] NET: Registered protocol family 1
298 -[ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
299 -[ 2.387039] Crashlog allocated RAM at address 0x3f00000
300 -[ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
301 -[ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
302 -[ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
303 -[ 2.425815] random: fast init done
304 -[ 2.430745] io scheduler noop registered
305 -[ 2.434579] io scheduler deadline registered (default)
306 -[ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
307 -[ 2.448257] console [ttyS0] disabled
308 -[ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
309 -[ 2.460836] console [ttyS0] enabled
310 -[ 2.460836] console [ttyS0] enabled
311 -[ 2.467691] bootconsole [early0] disabled
312 -[ 2.467691] bootconsole [early0] disabled
313 -[ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
314 -[ 2.484816] Enable NFI Clock
315 -[ 2.487689] # MTK NAND # : Use HW ECC
316 -[ 2.491382] Device not found, ID: c2f1
317 -[ 2.495110] Not Support this Device!
318 -[ 2.498835] chip_mode=00000001
319 -[ 2.501893] Support this Device in MTK table! c2f1
320 -[ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
321 -[ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
322 -[ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
323 -[ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
324 -[ 2.531927] Scanning device for bad blocks
325 -[ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
326 -[ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
327 -[ 2.831774] 0x000000000000-0x000000080000 : "uboot"
328 -[ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
329 -[ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
330 -[ 2.849892] 0x000000100000-0x000000140000 : "s_env"
331 -[ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
332 -[ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
333 -[ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
334 -[ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
335 -[ 2.884061] 0x000002980000-0x000005180000 : "firmware"
336 -[ 3.438509] 2 uimage-fw partitions found on MTD device firmware
337 -[ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
338 -[ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
339 -[ 3.456742] [mtk_nand] probe successfully!
340 -[ 3.461570] Signature matched and data read!
341 -[ 3.465818] load_fact_bbt success 1023
342 -[ 3.470276] libphy: Fixed MDIO Bus: probed
343 -[ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
344 -[ 3.550970] mtd_read_prop_mac: hw_mac_addr=
345 -[ 3.556774] libphy: mdio: probed
346 -[ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
347 -[ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
348 -[ 4.978262] NET: Registered protocol family 10
349 -[ 4.984286] Segment Routing with IPv6
350 -[ 4.988020] NET: Registered protocol family 17
351 -[ 4.992556] 8021q: 802.1Q VLAN Support v1.8
352 -[ 4.999621] UBI: auto-attach mtd9
353 -[ 5.003015] ubi0: attaching mtd9
354 -[ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
355 -[ 5.039967] ubi0: scanning is finished
356 -[ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
357 -[ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
358 -[ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
359 -[ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
360 -[ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
361 -[ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
362 -[ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
363 -[ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
364 -[ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
365 -[ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
366 -[ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
367 -[ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
368 -[ 5.165234] hctosys: unable to open rtc device (rtc0)
369 -[ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
370 -[ 5.195491] Freeing unused kernel memory: 1260K
371 -[ 5.200022] This architecture does not have kernel memory protection.
372 -[ 5.783744] init: Console is alive
373 -[ 5.787378] init: - watchdog -
374 -[ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
375 -[ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
376 -[ 6.591413] usbcore: registered new interface driver usbfs
377 -[ 6.596966] usbcore: registered new interface driver hub
378 -[ 6.602453] usbcore: registered new device driver usb
379 -[ 6.615285] SCSI subsystem initialized
380 -[ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
381 -[ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
382 -[ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
383 -[ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
384 -[ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
385 -[ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
386 -[ 6.676639] hub 1-0:1.0: USB hub found
387 -[ 6.680467] hub 1-0:1.0: 2 ports detected
388 -[ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
389 -[ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
390 -[ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
391 -[ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
392 -[ 6.713446] hub 2-0:1.0: USB hub found
393 -[ 6.717275] hub 2-0:1.0: 1 port detected
394 -[ 6.727313] usbcore: registered new interface driver usb-storage
395 -[ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
396 -[ 6.750877] init: - preinit -
397 -[ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
398 -[ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
399 -[ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
400 -[ 7.225920] scsi host0: usb-storage 2-1:1.0
401 -[ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
74 +[ 0.007805] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
75 +[ 0.073978] pid_max: default: 32768 minimum: 301
76 +[ 0.078744] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
77 +[ 0.085252] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
78 +[ 0.094034] Hierarchical SRCU implementation.
79 +[ 0.099185] smp: Bringing up secondary CPUs ...
80 +[ 0.109505] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
81 +[ 0.109515] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
82 +[ 0.109526] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
83 +[ 0.109664] CPU1 revision is: 0001992f (MIPS 1004Kc)
84 +[ 0.163934] Synchronize counters for CPU 1: done.
85 +[ 0.203356] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
86 +[ 0.203365] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
87 +[ 0.203372] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
88 +[ 0.203446] CPU2 revision is: 0001992f (MIPS 1004Kc)
89 +[ 0.255085] Synchronize counters for CPU 2: done.
90 +[ 0.290669] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
91 +[ 0.290678] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
92 +[ 0.290686] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
93 +[ 0.290767] CPU3 revision is: 0001992f (MIPS 1004Kc)
94 +[ 0.340270] Synchronize counters for CPU 3: done.
95 +[ 0.370137] smp: Brought up 1 node, 4 CPUs
96 +[ 0.377732] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
97 +[ 0.387523] futex hash table entries: 1024 (order: 3, 32768 bytes)
98 +[ 0.393811] pinctrl core: initialized pinctrl subsystem
99 +[ 0.400270] NET: Registered protocol family 16
100 +[ 0.423063] mt7621_gpio 1e000600.gpio: registering 32 gpios
101 +[ 0.428878] mt7621_gpio 1e000600.gpio: registering 32 gpios
102 +[ 0.434658] mt7621_gpio 1e000600.gpio: registering 32 gpios
103 +[ 0.442956] clocksource: Switched to clocksource GIC
104 +[ 0.449425] NET: Registered protocol family 2
105 +[ 0.454419] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
106 +[ 0.461303] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
107 +[ 0.467778] TCP: Hash tables configured (established 2048 bind 2048)
108 +[ 0.474212] UDP hash table entries: 256 (order: 1, 8192 bytes)
109 +[ 0.479979] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
110 +[ 0.486452] NET: Registered protocol family 1
111 +[ 0.722896] 4 CPUs re-calibrate udelay(lpj = 2924544)
112 +[ 0.729302] Crashlog allocated RAM at address 0x3f00000
113 +[ 0.734701] workingset: timestamp_bits=30 max_order=16 bucket_order=0
114 +[ 0.748195] squashfs: version 4.0 (2009/01/31) Phillip Lougher
115 +[ 0.753975] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
116 +[ 0.765554] random: fast init done
117 +[ 0.770526] io scheduler noop registered
118 +[ 0.774396] io scheduler deadline registered (default)
119 +[ 0.780409] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
120 +[ 0.788106] console [ttyS0] disabled
121 +[ 0.791645] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A
122 +[ 0.800653] console [ttyS0] enabled
123 +[ 0.800653] console [ttyS0] enabled
124 +[ 0.807523] bootconsole [early0] disabled
125 +[ 0.807523] bootconsole [early0] disabled
126 +[ 0.816146] cacheinfo: Unable to detect cache hierarchy for CPU 0
127 +[ 0.823038] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
128 +[ 0.830119] Enable NFI Clock
129 +[ 0.833044] # MTK NAND # : Use HW ECC
130 +[ 0.836708] Device not found, ID: c2f1
131 +[ 0.840433] Not Support this Device!
132 +[ 0.844177] chip_mode=00000001
133 +[ 0.847217] Support this Device in MTK table! c2f1
134 +[ 0.852163] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
135 +[ 0.858632] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
136 +[ 0.864966] nand: Macronix NAND 128MiB 3,3V 8-bit
137 +[ 0.869648] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
138 +[ 0.877212] Scanning device for bad blocks
139 +[ 0.898080] Bad eraseblock 71 at 0x0000008e0000
140 +[ 0.967695] Bad eraseblock 349 at 0x000002ba0000
141 +[ 0.978049] Bad eraseblock 374 at 0x000002ec0000
142 +[ 0.987933] Bad eraseblock 397 at 0x0000031a0000
143 +[ 1.006268] Bad eraseblock 456 at 0x000003900000
144 +[ 1.021533] Bad eraseblock 502 at 0x000003ec0000
145 +[ 1.034940] Bad eraseblock 540 at 0x000004380000
146 +[ 1.050681] Bad eraseblock 588 at 0x000004980000
147 +[ 1.107262] Bad eraseblock 810 at 0x000006540000
148 +[ 1.129339] Bad eraseblock 885 at 0x000006ea0000
149 +[ 1.166421] 7 fixed-partitions partitions found on MTD device MT7621-NAND
150 +[ 1.173195] Creating 7 MTD partitions on "MT7621-NAND":
151 +[ 1.178405] 0x000000000000-0x000000080000 : "uboot"
152 +[ 1.184240] 0x000000080000-0x0000000c0000 : "uboot_env"
153 +[ 1.190298] 0x0000000c0000-0x000000100000 : "factory"
154 +[ 1.196219] 0x000000100000-0x000000140000 : "s_env"
155 +[ 1.201900] 0x000000140000-0x000000180000 : "devinfo"
156 +[ 1.207850] 0x000000180000-0x000002980000 : "firmware1"
157 +[ 1.216116] 0x000002980000-0x000005180000 : "firmware2"
158 +[ 1.223224] 1 uboot-env-boot_part partitions found on MTD device firmware2
159 +[ 1.230090] 0x000002980000-0x000005180000 : "firmware"
160 +[ 1.784436] 2 uimage-fw partitions found on MTD device firmware
161 +[ 1.790355] 0x000002980000-0x000002b60000 : "kernel"
162 +[ 1.796251] 0x000002b60000-0x000005180000 : "ubi"
163 +[ 1.802130] [mtk_nand] probe successfully!
164 +[ 1.806957] Signature matched and data read!
165 +[ 1.811205] load_fact_bbt success 1023
166 +[ 1.815701] libphy: Fixed MDIO Bus: probed
167 +[ 1.885315] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
168 +[ 1.893332] mtd_read_prop_mac: hw_mac_addr=XX:YY:ZZ:00:11:33
169 +[ 1.899142] libphy: mdio: probed
170 +[ 3.302014] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
171 +[ 3.308669] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20
172 +[ 3.319426] NET: Registered protocol family 10
173 +[ 3.325219] Segment Routing with IPv6
174 +[ 3.328949] NET: Registered protocol family 17
175 +[ 3.333457] 8021q: 802.1Q VLAN Support v1.8
176 +[ 3.340506] UBI: auto-attach mtd9
177 +[ 3.343893] ubi0: attaching mtd9
178 +[ 3.363286] UBI: EOF marker found, PEBs from 15 will be erased
179 +[ 3.369474] ubi0: scanning is finished
180 +[ 3.411360] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 269 LEBs
181 +[ 3.418731] ubi0: attached mtd9 (name "ubi", size 38 MiB)
182 +[ 3.424164] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
183 +[ 3.431006] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
184 +[ 3.437780] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
185 +[ 3.444725] ubi0: good PEBs: 298, bad PEBs: 7, corrupted PEBs: 0
186 +[ 3.450701] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
187 +[ 3.457906] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1203044710
188 +[ 3.467015] ubi0: available PEBs: 0, total reserved PEBs: 298, PEBs reserved for bad PEB handling: 13
189 +[ 3.476230] ubi0: background thread "ubi_bgt0d" started, PID 359
190 +[ 3.477972] block ubiblock0_0: created from ubi0:0(rootfs)
191 +[ 3.487716] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
192 +[ 3.494673] hctosys: unable to open rtc device (rtc0)
193 +[ 3.519930] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
194 +[ 3.527684] Freeing unused kernel memory: 268K
195 +[ 3.532122] This architecture does not have kernel memory protection.
196 +[ 4.017012] init: Console is alive
197 +[ 4.020616] init: - watchdog -
198 +[ 4.354210] kmodloader: loading kernel modules from /etc/modules-boot.d/*
199 +[ 4.443714] usbcore: registered new interface driver usbfs
200 +[ 4.449260] usbcore: registered new interface driver hub
201 +[ 4.454739] usbcore: registered new device driver usb
202 +[ 4.467426] SCSI subsystem initialized
203 +[ 4.480878] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
204 +[ 4.489588] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
205 +[ 4.498507] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
206 +[ 4.503843] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
207 +[ 4.523114] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
208 +[ 4.532283] xhci-mtk 1e1c0000.xhci: irq 19, io mem 0x1e1c0000
209 +[ 4.538971] hub 1-0:1.0: USB hub found
210 +[ 4.542796] hub 1-0:1.0: 2 ports detected
211 +[ 4.547400] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
212 +[ 4.552722] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
213 +[ 4.560210] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
214 +[ 4.560493] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up
215 +[ 4.566816] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
216 +[ 4.581320] hub 2-0:1.0: USB hub found
217 +[ 4.585161] hub 2-0:1.0: 1 port detected
218 +[ 4.593449] usbcore: registered new interface driver usb-storage
219 +[ 4.599693] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
220 +[ 4.623240] init: - preinit -
221 +[ 5.073028] usb 1-2: new high-speed USB device number 2 using xhci-mtk
222 +[ 5.221107] mtk_soc_eth 1e100000.ethernet: PPE started
223 +[ 5.255985] usb-storage 1-2:1.0: USB Mass Storage device detected
224 +[ 5.262845] scsi host0: usb-storage 1-2:1.0
402 402  Press the [f] key and hit [enter] to enter failsafe mode
403 403  Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
404 -[ 10.582466] UBIFS (ubi0:1): default file-system created
405 -[ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
406 -[ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
407 -[ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
408 -[ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
409 -[ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
410 -[ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
411 -[ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
412 -[ 10.756981] mount_root: switching to ubifs overlay
413 -[ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
414 -[ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
415 -[ 10.876085] procd: - early -
416 -[ 10.879061] procd: - watchdog -
417 -[ 11.550737] procd: - watchdog -
418 -[ 11.554202] procd: - ubus -
419 -[ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
420 -[ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
421 -[ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
422 -[ 11.625387] procd: - init -
227 +[ 5.312718] random: procd: uninitialized urandom read (4 bytes read)
228 +[ 6.273781] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
229 +[ 6.283479] sd 0:0:0:0: [sda] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB)
230 +[ 6.291556] sd 0:0:0:0: [sda] Write Protect is off
231 +[ 6.297040] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
232 +[ 6.313010] sd 0:0:0:0: [sda] Attached SCSI removable disk
233 +[ 8.450677] UBIFS (ubi0:1): default file-system created
234 +[ 8.457372] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 474
235 +[ 8.568317] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
236 +[ 8.576154] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
237 +[ 8.586040] UBIFS (ubi0:1): FS size: 32886784 bytes (31 MiB, 259 LEBs), journal size 1650688 bytes (1 MiB, 13 LEBs)
238 +[ 8.596442] UBIFS (ubi0:1): reserved for root: 1553323 bytes (1516 KiB)
239 +[ 8.603051] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID D42C5178-C937-4CB4-94EE-0031FFF6550A, small LPT model
240 +[ 8.617248] mount_root: overlay filesystem has not been fully initialized yet
241 +[ 8.624849] mount_root: switching to ubifs overlay
242 +[ 8.647505] urandom-seed: Seed file not found (/etc/urandom.seed)
243 +[ 8.728797] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
244 +[ 8.743450] procd: - early -
245 +[ 8.746426] procd: - watchdog -
246 +[ 9.403107] procd: - watchdog -
247 +[ 9.406559] procd: - ubus -
248 +[ 9.457080] random: ubusd: uninitialized urandom read (4 bytes read)
249 +[ 9.464255] random: ubusd: uninitialized urandom read (4 bytes read)
250 +[ 9.470985] random: ubusd: uninitialized urandom read (4 bytes read)
251 +[ 9.478186] procd: - init -
423 423  Please press Enter to activate this console.
424 -[ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
425 -[ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
426 -[ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
427 -[ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
428 -[ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
429 -[ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
430 -[ 12.127574] urngd: v1.0.0 started.
431 -[ 12.145053] xt_time: kernel timezone is -0000
432 -[ 12.214244] bus=0x1, slot = 0x0, irq=0x0
433 -[ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
434 -[ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
435 -[ 12.241178]
436 -[ 12.266469] random: crng init done
437 -[ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
438 -[ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
439 -[ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
440 -+ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
441 -[ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
442 -[ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
443 -[ 20.161193]
444 -[ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
445 -[ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
446 -[ 27.852570] PPP generic driver version 2.4.2
447 -[ 27.858358] NET: Registered protocol family 24
448 -[ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
449 -[ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
450 -[ 41.287935] br-lan: port 1(eth0.2) entered blocking state
451 -[ 41.293420] br-lan: port 1(eth0.2) entered disabled state
452 -[ 41.299522] device eth0.2 entered promiscuous mode
453 -[ 41.304484] device eth0 entered promiscuous mode
454 -[ 41.311947] br-lan: port 1(eth0.2) entered blocking state
455 -[ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
456 -[ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
457 -[ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
253 +[ 9.714720] kmodloader: loading kernel modules from /etc/modules.d/*
254 +[ 9.724486] ip6_tables: (C) 2000-2006 Netfilter Core Team
255 +[ 9.738298] ip_tables: (C) 2000-2006 Netfilter Core Team
256 +[ 9.749820] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
257 +[ 9.790837] xt_time: kernel timezone is -0000
258 +[ 9.801201] PPP generic driver version 2.4.2
259 +[ 9.806822] NET: Registered protocol family 24
260 +[ 9.813785] kmodloader: done loading kernel modules from /etc/modules.d/*
261 +[ 10.951148] urandom_read: 5 callbacks suppressed
262 +[ 10.951161] random: jshn: uninitialized urandom read (4 bytes read)
263 +[ 16.501675] mtk_soc_eth 1e100000.ethernet: PPE started
264 +[ 16.512395] br-lan: port 1(eth0.2) entered blocking state
265 +[ 16.517965] br-lan: port 1(eth0.2) entered disabled state
266 +[ 16.523873] device eth0.2 entered promiscuous mode
267 +[ 16.528744] device eth0 entered promiscuous mode
268 +[ 16.537326] br-lan: port 1(eth0.2) entered blocking state
269 +[ 16.542760] br-lan: port 1(eth0.2) entered forwarding state
270 +[ 16.548768] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
271 +[ 17.553672] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
272 +[ 21.883773] random: crng init done
273 +
458 458  
459 459  
276 +BusyBox v1.30.1 () built-in shell (ash)
460 460  
461 -BusyBox v1.31.0 () built-in shell (ash)
462 -
463 463   _______ ________ __
464 464   | |.-----.-----.-----.| | | |.----.| |_
465 465   | - || _ | -__| || | | || _|| _|
... ... @@ -466,7 +466,7 @@
466 466   |_______|| __|_____|__|__||________||__| |____|
467 467   |__| W I R E L E S S F R E E D O M
468 468   -----------------------------------------------------
469 - OpenWrt SNAPSHOT, r10942-9bebafcb5d
284 + OpenWrt SNAPSHOT, r9254+122-3b40121530
470 470   -----------------------------------------------------
471 471  === WARNING! =====================================
472 472  There is no root password defined on this device!
... ... @@ -473,344 +473,15 @@
473 473  Use the "passwd" command to set up a new password
474 474  in order to prevent unauthorized SSH logins.
475 475  --------------------------------------------------
476 -root@OpenWrt:/# ifconfig -a
477 -br-lan Link encap:Ethernet HWaddr
478 - inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
479 - inet6 addr: fde0:62db:5134::1/60 Scope:Global
480 - inet6 addr: fe80::/64 Scope:Link
481 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
482 - RX packets:41 errors:0 dropped:0 overruns:0 frame:0
483 - TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
484 - collisions:0 txqueuelen:1000
485 - RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
486 -
487 -eth0 Link encap:Ethernet HWaddr
488 - inet6 addr: fe80::/64 Scope:Link
489 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
490 - RX packets:102 errors:0 dropped:0 overruns:0 frame:0
491 - TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
492 - collisions:0 txqueuelen:1000
493 - RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
494 - Interrupt:21
495 -
496 -eth0.1 Link encap:Ethernet HWaddr
497 - inet6 addr: fe80::/64 Scope:Link
498 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
499 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0
500 - TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
501 - collisions:0 txqueuelen:1000
502 - RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
503 -
504 -eth0.2 Link encap:Ethernet HWaddr
505 - UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
506 - RX packets:41 errors:0 dropped:0 overruns:0 frame:0
507 - TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
508 - collisions:0 txqueuelen:1000
509 - RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
510 -
511 -lo Link encap:Local Loopback
512 - inet addr:127.0.0.1 Mask:255.0.0.0
513 - inet6 addr: ::1/128 Scope:Host
514 - UP LOOPBACK RUNNING MTU:65536 Metric:1
515 - RX packets:28 errors:0 dropped:0 overruns:0 frame:0
516 - TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
517 - collisions:0 txqueuelen:1000
518 - RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
519 -
520 -wlan0 Link encap:Ethernet HWaddr
521 - BROADCAST MULTICAST MTU:1500 Metric:1
522 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0
523 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
524 - collisions:0 txqueuelen:1000
525 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
526 -
527 -wlan1 Link encap:Ethernet HWaddr
528 - BROADCAST MULTICAST MTU:1500 Metric:1
529 - RX packets:0 errors:0 dropped:0 overruns:0 frame:0
530 - TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
531 - collisions:0 txqueuelen:1000
532 - RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
533 -
534 -root@OpenWrt:/# ls -l
535 -drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
536 -drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
537 -drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
538 --rwxr-xr-x 1 root root 78 Dec 30 2018 init
539 -drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
540 -drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
541 -drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
542 -dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
543 -drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
544 -drwxr-xr-x 2 root root 3 Sep 1 06:04 root
545 -drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
546 -dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
547 -drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
548 -drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
549 -lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
550 -drwxr-xr-x 2 root root 3 Sep 1 06:04 www
551 -root@OpenWrt:/# ps
552 - PID USER VSZ STAT COMMAND
553 - 1 root 1576 S /sbin/procd
554 - 2 root 0 SW [kthreadd]
555 - 3 root 0 IW [kworker/0:0]
556 - 4 root 0 IW< [kworker/0:0H]
557 - 5 root 0 IW [kworker/u8:0]
558 - 6 root 0 IW< [mm_percpu_wq]
559 - 7 root 0 SW [ksoftirqd/0]
560 - 8 root 0 IW [rcu_sched]
561 - 9 root 0 IW [rcu_bh]
562 - 10 root 0 SW [migration/0]
563 - 11 root 0 SW [cpuhp/0]
564 - 12 root 0 SW [cpuhp/1]
565 - 13 root 0 SW [migration/1]
566 - 14 root 0 SW [ksoftirqd/1]
567 - 16 root 0 IW< [kworker/1:0H]
568 - 17 root 0 SW [cpuhp/2]
569 - 18 root 0 SW [migration/2]
570 - 19 root 0 SW [ksoftirqd/2]
571 - 21 root 0 IW< [kworker/2:0H]
572 - 22 root 0 SW [cpuhp/3]
573 - 23 root 0 SW [migration/3]
574 - 24 root 0 SW [ksoftirqd/3]
575 - 25 root 0 IW [kworker/3:0]
576 - 26 root 0 IW< [kworker/3:0H]
577 - 27 root 0 IW< [netns]
578 - 41 root 0 IW [kworker/u8:3]
579 - 68 root 0 IW [kworker/3:1]
580 - 69 root 0 IW [kworker/2:1]
581 - 138 root 0 IW [kworker/1:1]
582 - 139 root 0 SW [oom_reaper]
583 - 140 root 0 IW< [writeback]
584 - 142 root 0 SW [kcompactd0]
585 - 143 root 0 IW< [crypto]
586 - 145 root 0 IW< [kblockd]
587 - 175 root 0 IW< [watchdogd]
588 - 199 root 0 SW [kswapd0]
589 - 268 root 0 IW< [pencrypt]
590 - 270 root 0 IW< [pdecrypt]
591 - 366 root 0 IW< [ipv6_addrconf]
592 - 378 root 0 SW [ubi_bgt0d]
593 - 383 root 0 IW< [kworker/0:1H]
594 - 384 root 0 IW< [kworker/2:1H]
595 - 385 root 0 IW [kworker/2:2]
596 - 386 root 0 IW< [kworker/3:1H]
597 - 389 root 0 IW< [kworker/1:1H]
598 - 429 root 0 IW [kworker/0:2]
599 - 437 root 0 IW [kworker/1:2]
600 - 453 root 0 SW [scsi_eh_0]
601 - 454 root 0 IW< [scsi_tmf_0]
602 - 455 root 0 SW [usb-storage]
603 - 496 root 0 SW [ubifs_bgt0_1]
604 - 573 root 1220 S /sbin/ubusd
605 - 574 root 1220 S /bin/ash --login
606 - 591 root 1028 S /sbin/urngd
607 - 660 root 0 IW< [cfg80211]
608 - 1012 root 1248 S /sbin/logd -S 64
609 - 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
610 - 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
611 - 1168 root 1700 S /sbin/netifd
612 - 1204 root 1448 S /usr/sbin/odhcpd
613 - 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
614 - 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
615 - 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
616 - 1720 root 1212 R ps
617 -root@OpenWrt:/etc# ping www.google.co
618 -PING www.google.co (): 56 data bytes
619 -64 bytes from : seq=0 ttl=52 time=4.718 ms
620 -^C
621 ---- www.google.co ping statistics ---
622 -1 packets transmitted, 1 packets received, 0% packet loss
623 -round-trip min/avg/max = 4.718/4.718/4.718 ms
624 -root@OpenWrt:/etc# ping www.google.com
625 -PING www.google.com (): 56 data bytes
626 -64 bytes from : seq=0 ttl=47 time=4.927 ms
627 -64 bytes from : seq=1 ttl=47 time=4.687 ms
628 -^C
629 ---- www.google.com ping statistics ---
630 -2 packets transmitted, 2 packets received, 0% packet loss
631 -round-trip min/avg/max = 4.687/4.807/4.927 ms
632 -root@OpenWrt:/etc# opkg update
633 -Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
634 -Updated list of available packages in /var/opkg-lists/openwrt_core
635 -Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
636 -Signature check passed.
637 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
638 -Updated list of available packages in /var/opkg-lists/openwrt_base
639 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
640 -Signature check passed.
641 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
642 -Updated list of available packages in /var/opkg-lists/openwrt_luci
643 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
644 -Signature check passed.
645 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
646 -Updated list of available packages in /var/opkg-lists/openwrt_packages
647 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
648 -Signature check passed.
649 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
650 -Updated list of available packages in /var/opkg-lists/openwrt_routing
651 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
652 -Signature check passed.
653 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
654 -Updated list of available packages in /var/opkg-lists/openwrt_telephony
655 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
656 -Signature check passed.
657 -root@OpenWrt:/etc# opkg install luci
658 -Installing luci (git-19.241.65047-dffe9ca-1) to root...
659 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
660 -Installing uhttpd (2019-08-17-6b03f960-3) to root...
661 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
662 -Installing liblua5.1.5 (5.1.5-5) to root...
663 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
664 -Installing lua (5.1.5-5) to root...
665 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
666 -Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
667 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
668 -Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
669 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
670 -Installing rpcd (2019-06-05-89bfaa42-3) to root...
671 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
672 -Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
673 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
674 -Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
675 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
676 -Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
677 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
678 -Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
679 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
680 -Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
681 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
682 -Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
683 -Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
684 -Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
685 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
686 -Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
687 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
688 -Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
689 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
690 -Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
691 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
692 -Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
693 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
694 -Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
695 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
696 -Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
697 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
698 -Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
699 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
700 -Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
701 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
702 -Installing rpcd-mod-rrdns (20170710) to root...
703 -Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
704 -Configuring liblucihttp0.
705 -Configuring luci-app-opkg.
706 -Configuring rpcd.
707 -Configuring liblua5.1.5.
708 -Configuring luci-lib-ip.
709 -Configuring libubus-lua.
710 -Configuring libiwinfo-lua.
711 -Configuring lua.
712 -Configuring luci-lib-nixio.
713 -Configuring luci-lib-jsonc.
714 -Configuring liblucihttp-lua.
715 -Configuring luci-base.
716 -Configuring luci-mod-system.
717 -Configuring luci-theme-bootstrap.
718 -Configuring luci-mod-status.
719 -Configuring luci-app-firewall.
720 -Configuring luci-proto-ppp.
721 -Configuring luci-mod-network.
722 -Configuring luci-mod-admin-full.
723 -Configuring luci-proto-ipv6.
724 -Configuring uhttpd.
725 -Configuring rpcd-mod-rrdns.
726 -Configuring luci.
727 -root@OpenWrt:/etc# df -h
291 +root@OpenWrt:/# free
292 + total used free shared buff/cache available
293 +Mem: 253572 23256 224316 60 6000 203516
294 +Swap: 0 0 0
295 +root@OpenWrt:/# df -h
728 728  Filesystem Size Used Available Use% Mounted on
729 -/dev/root 2.8M 2.8M 0 100% /rom
730 -tmpfs 123.5M 764.0K 122.8M 1% /tmp
731 -/dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
732 -overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
297 +/dev/root 1.5M 1.5M 0 100% /rom
298 +tmpfs 123.8M 60.0K 123.8M 0% /tmp
299 +/dev/ubi0_1 28.3M 36.0K 26.8M 0% /overlay
300 +overlayfs:/overlay 28.3M 36.0K 26.8M 0% /
733 733  tmpfs 512.0K 0 512.0K 0% /dev
734 -root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
735 -[ 2075.973245] br-lan: port 2(wlan0) entered blocking state
736 -[ 2075.978551] br-lan: port 2(wlan0) entered disabled state
737 -[ 2075.984368] device wlan0 entered promiscuous mode
738 -[ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
739 -[ 2087.171890] br-lan: port 2(wlan0) entered blocking state
740 -[ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
741 -[ 2096.494533] device wlan0 left promiscuous mode
742 -[ 2096.499322] br-lan: port 2(wlan0) entered disabled state
743 -[ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
744 -[ 2097.393568] br-lan: port 2(wlan0) entered blocking state
745 -[ 2097.398924] br-lan: port 2(wlan0) entered disabled state
746 -[ 2097.404922] device wlan0 entered promiscuous mode
747 -[ 2097.409972] br-lan: port 2(wlan0) entered blocking state
748 -[ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
749 -[ 2097.749351] br-lan: port 2(wlan0) entered disabled state
750 -[ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
751 -[ 2107.960561] br-lan: port 2(wlan0) entered blocking state
752 -[ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
753 -[ 2117.964353] device wlan0 left promiscuous mode
754 -[ 2117.969130] br-lan: port 2(wlan0) entered disabled state
755 -[ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
756 -[ 2118.792816] br-lan: port 2(wlan0) entered blocking state
757 -[ 2118.798173] br-lan: port 2(wlan0) entered disabled state
758 -[ 2118.804171] device wlan0 entered promiscuous mode
759 -[ 2118.809362] br-lan: port 2(wlan0) entered blocking state
760 -[ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
761 -[ 2119.189273] br-lan: port 2(wlan0) entered disabled state
762 -[ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
763 -[ 2130.264811] br-lan: port 2(wlan0) entered blocking state
764 -[ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
765 -[ 2245.748473] device wlan0 left promiscuous mode
766 -[ 2245.753145] br-lan: port 2(wlan0) entered disabled state
767 -[ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
768 -[ 2246.546273] br-lan: port 2(wlan0) entered blocking state
769 -[ 2246.551680] br-lan: port 2(wlan0) entered disabled state
770 -[ 2246.557667] device wlan0 entered promiscuous mode
771 -[ 2246.562855] br-lan: port 2(wlan0) entered blocking state
772 -[ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
773 -[ 2246.838430] br-lan: port 2(wlan0) entered disabled state
774 -[ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
775 -[ 2246.954850] br-lan: port 2(wlan1) entered blocking state
776 -[ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
777 -
778 -root@OpenWrt:/etc#
779 -root@OpenWrt:/etc# uci show wireless
780 -wireless.radio0=wifi-device
781 -wireless.radio0.type='mac80211'
782 -wireless.radio0.channel='11'
783 -wireless.radio0.hwmode='11g'
784 -wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
785 -wireless.radio0.country='00'
786 -wireless.radio0.legacy_rates='1'
787 -wireless.radio0.htmode='HT20'
788 -wireless.default_radio0=wifi-iface
789 -wireless.default_radio0.device='radio0'
790 -wireless.default_radio0.network='lan'
791 -wireless.default_radio0.mode='ap'
792 -wireless.default_radio0.encryption='psk2'
793 -wireless.default_radio0.key='qwerty1234'
794 -wireless.default_radio0.ssid='asdf'
795 -wireless.radio1=wifi-device
796 -wireless.radio1.type='mac80211'
797 -wireless.radio1.channel='36'
798 -wireless.radio1.hwmode='11a'
799 -wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
800 -wireless.radio1.htmode='VHT80'
801 -wireless.radio1.__toggle='Enable'
802 -wireless.radio1.country='00'
803 -wireless.radio1.legacy_rates='1'
804 -wireless.default_radio1=wifi-iface
805 -wireless.default_radio1.device='radio1'
806 -wireless.default_radio1.network='lan'
807 -wireless.default_radio1.mode='ap'
808 -wireless.default_radio1.ssid='asdf'
809 -wireless.default_radio1.encryption='psk2'
810 -wireless.default_radio1.key='qwerty1234'
811 -root@OpenWrt:/etc#
812 812  {{/code}}
813 -
814 -Firmware:
815 -
816 -./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin
1567332570723-651.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.CodePowered
Size
... ... @@ -1,1 +1,0 @@
1 -166.8 KB
Content
openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.CodePowered
Size
... ... @@ -1,1 +1,0 @@
1 -5.6 MB
Content