Changes for page Openwrt for Linksys EA8100
Last modified by Leon Poon on 2021/07/16 18:40
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,302 +1,4 @@ 1 1 switch0: port 0 = wan, port 1,2,3,4 = lan 2 2 3 3 4 -[[https:~~/~~/github.com/LeonPoon/openwrt/compare/master...master-linksys_ea8100>>https://github.com/LeonPoon/openwrt/compare/master...master-linksys_ea8100]] 5 - 6 -b90086cc98a15a2774382b691f1249f4ad11a1c7 Download (no wifi): 7 - 8 -* [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-ea8100-initramfs-kernel.bin]] 9 -* [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin]] 10 - 11 -Dmesg: 12 - 13 -{{code language="plain"}} 14 -check env def auto_recovery no 15 -check env def auto_recovery yes 16 -check env def boot_part 1 17 -check env def boot_part_ready 3 18 -enabled:1, boot_part:2, boot_part_ready:3 19 -..nand read ret = 0x20000 20 -boot_count:1, next_record:4 21 -boot_count:1, next_record:4 22 - 23 -3: System Boot system code via Flash. 24 -## Booting image at be980000 ... 25 - Image Name: MIPS OpenWrt Linux-4.14.101 26 - Image Type: MIPS Linux Kernel Image (lzma compressed) 27 - Data Size: 1908285 Bytes = 1.8 MB 28 - Load Address: 80001000 29 - Entry Point: 80001000 30 -.............................. Verifying Checksum ... OK 31 - Uncompressing Kernel Image ... OK 32 -No initrd 33 -## Transferring control to Linux (at address 80001000) ... 34 -## Giving linux memsize in MB, 256 35 - 36 -Starting kernel ... 37 - 38 -[ 0.000000] Linux version 4.14.101 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r9033-cbee2131d6)) #0 SMP Sat Feb 16 05:28:27 2019 39 -[ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 40 -[ 0.000000] bootconsole [early0] enabled 41 -[ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) 42 -[ 0.000000] MIPS: machine is Linksys EA8100 43 -[ 0.000000] Determined physical RAM map: 44 -[ 0.000000] memory: 10000000 @ 00000000 (usable) 45 -[ 0.000000] Initrd not found or empty - disabling initrd 46 -[ 0.000000] VPE topology {2,2} total 4 47 -[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 48 -[ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 49 -[ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 50 -[ 0.000000] Zone ranges: 51 -[ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] 52 -[ 0.000000] HighMem empty 53 -[ 0.000000] Movable zone start for each node 54 -[ 0.000000] Early memory node ranges 55 -[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] 56 -[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] 57 -[ 0.000000] random: get_random_bytes called from start_kernel+0x90/0x4a4 with crng_init=0 58 -[ 0.000000] percpu: Embedded 14 pages/cpu @8120f000 s26192 r8192 d22960 u57344 59 -[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65024 60 -[ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 61 -[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) 62 -[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) 63 -[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) 64 -[ 0.000000] Writing ErrCtl register=0002c42c 65 -[ 0.000000] Readback ErrCtl register=0002c42c 66 -[ 0.000000] Memory: 253304K/262144K available (4502K kernel code, 233K rwdata, 1000K rodata, 268K init, 248K bss, 8840K reserved, 0K cma-reserved, 0K highmem) 67 -[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 68 -[ 0.000000] Hierarchical RCU implementation. 69 -[ 0.000000] NR_IRQS: 256 70 -[ 0.000000] CPU Clock: 880MHz 71 -[ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns 72 -[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns 73 -[ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns 74 -[ 0.007805] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) 75 -[ 0.073978] pid_max: default: 32768 minimum: 301 76 -[ 0.078744] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) 77 -[ 0.085252] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) 78 -[ 0.094034] Hierarchical SRCU implementation. 79 -[ 0.099185] smp: Bringing up secondary CPUs ... 80 -[ 0.109505] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 81 -[ 0.109515] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 82 -[ 0.109526] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 83 -[ 0.109664] CPU1 revision is: 0001992f (MIPS 1004Kc) 84 -[ 0.163934] Synchronize counters for CPU 1: done. 85 -[ 0.203356] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 86 -[ 0.203365] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 87 -[ 0.203372] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 88 -[ 0.203446] CPU2 revision is: 0001992f (MIPS 1004Kc) 89 -[ 0.255085] Synchronize counters for CPU 2: done. 90 -[ 0.290669] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. 91 -[ 0.290678] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes 92 -[ 0.290686] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. 93 -[ 0.290767] CPU3 revision is: 0001992f (MIPS 1004Kc) 94 -[ 0.340270] Synchronize counters for CPU 3: done. 95 -[ 0.370137] smp: Brought up 1 node, 4 CPUs 96 -[ 0.377732] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns 97 -[ 0.387523] futex hash table entries: 1024 (order: 3, 32768 bytes) 98 -[ 0.393811] pinctrl core: initialized pinctrl subsystem 99 -[ 0.400270] NET: Registered protocol family 16 100 -[ 0.423063] mt7621_gpio 1e000600.gpio: registering 32 gpios 101 -[ 0.428878] mt7621_gpio 1e000600.gpio: registering 32 gpios 102 -[ 0.434658] mt7621_gpio 1e000600.gpio: registering 32 gpios 103 -[ 0.442956] clocksource: Switched to clocksource GIC 104 -[ 0.449425] NET: Registered protocol family 2 105 -[ 0.454419] TCP established hash table entries: 2048 (order: 1, 8192 bytes) 106 -[ 0.461303] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) 107 -[ 0.467778] TCP: Hash tables configured (established 2048 bind 2048) 108 -[ 0.474212] UDP hash table entries: 256 (order: 1, 8192 bytes) 109 -[ 0.479979] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) 110 -[ 0.486452] NET: Registered protocol family 1 111 -[ 0.722896] 4 CPUs re-calibrate udelay(lpj = 2924544) 112 -[ 0.729302] Crashlog allocated RAM at address 0x3f00000 113 -[ 0.734701] workingset: timestamp_bits=30 max_order=16 bucket_order=0 114 -[ 0.748195] squashfs: version 4.0 (2009/01/31) Phillip Lougher 115 -[ 0.753975] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. 116 -[ 0.765554] random: fast init done 117 -[ 0.770526] io scheduler noop registered 118 -[ 0.774396] io scheduler deadline registered (default) 119 -[ 0.780409] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled 120 -[ 0.788106] console [ttyS0] disabled 121 -[ 0.791645] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 18, base_baud = 3125000) is a 16550A 122 -[ 0.800653] console [ttyS0] enabled 123 -[ 0.800653] console [ttyS0] enabled 124 -[ 0.807523] bootconsole [early0] disabled 125 -[ 0.807523] bootconsole [early0] disabled 126 -[ 0.816146] cacheinfo: Unable to detect cache hierarchy for CPU 0 127 -[ 0.823038] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error 128 -[ 0.830119] Enable NFI Clock 129 -[ 0.833044] # MTK NAND # : Use HW ECC 130 -[ 0.836708] Device not found, ID: c2f1 131 -[ 0.840433] Not Support this Device! 132 -[ 0.844177] chip_mode=00000001 133 -[ 0.847217] Support this Device in MTK table! c2f1 134 -[ 0.852163] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16 135 -[ 0.858632] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1 136 -[ 0.864966] nand: Macronix NAND 128MiB 3,3V 8-bit 137 -[ 0.869648] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 138 -[ 0.877212] Scanning device for bad blocks 139 -[ 0.898080] Bad eraseblock 71 at 0x0000008e0000 140 -[ 0.967695] Bad eraseblock 349 at 0x000002ba0000 141 -[ 0.978049] Bad eraseblock 374 at 0x000002ec0000 142 -[ 0.987933] Bad eraseblock 397 at 0x0000031a0000 143 -[ 1.006268] Bad eraseblock 456 at 0x000003900000 144 -[ 1.021533] Bad eraseblock 502 at 0x000003ec0000 145 -[ 1.034940] Bad eraseblock 540 at 0x000004380000 146 -[ 1.050681] Bad eraseblock 588 at 0x000004980000 147 -[ 1.107262] Bad eraseblock 810 at 0x000006540000 148 -[ 1.129339] Bad eraseblock 885 at 0x000006ea0000 149 -[ 1.166421] 7 fixed-partitions partitions found on MTD device MT7621-NAND 150 -[ 1.173195] Creating 7 MTD partitions on "MT7621-NAND": 151 -[ 1.178405] 0x000000000000-0x000000080000 : "uboot" 152 -[ 1.184240] 0x000000080000-0x0000000c0000 : "uboot_env" 153 -[ 1.190298] 0x0000000c0000-0x000000100000 : "factory" 154 -[ 1.196219] 0x000000100000-0x000000140000 : "s_env" 155 -[ 1.201900] 0x000000140000-0x000000180000 : "devinfo" 156 -[ 1.207850] 0x000000180000-0x000002980000 : "firmware1" 157 -[ 1.216116] 0x000002980000-0x000005180000 : "firmware2" 158 -[ 1.223224] 1 uboot-env-boot_part partitions found on MTD device firmware2 159 -[ 1.230090] 0x000002980000-0x000005180000 : "firmware" 160 -[ 1.784436] 2 uimage-fw partitions found on MTD device firmware 161 -[ 1.790355] 0x000002980000-0x000002b60000 : "kernel" 162 -[ 1.796251] 0x000002b60000-0x000005180000 : "ubi" 163 -[ 1.802130] [mtk_nand] probe successfully! 164 -[ 1.806957] Signature matched and data read! 165 -[ 1.811205] load_fact_bbt success 1023 166 -[ 1.815701] libphy: Fixed MDIO Bus: probed 167 -[ 1.885315] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0 168 -[ 1.893332] mtd_read_prop_mac: hw_mac_addr=XX:YY:ZZ:00:11:33 169 -[ 1.899142] libphy: mdio: probed 170 -[ 3.302014] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver 171 -[ 3.308669] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 20 172 -[ 3.319426] NET: Registered protocol family 10 173 -[ 3.325219] Segment Routing with IPv6 174 -[ 3.328949] NET: Registered protocol family 17 175 -[ 3.333457] 8021q: 802.1Q VLAN Support v1.8 176 -[ 3.340506] UBI: auto-attach mtd9 177 -[ 3.343893] ubi0: attaching mtd9 178 -[ 3.363286] UBI: EOF marker found, PEBs from 15 will be erased 179 -[ 3.369474] ubi0: scanning is finished 180 -[ 3.411360] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 269 LEBs 181 -[ 3.418731] ubi0: attached mtd9 (name "ubi", size 38 MiB) 182 -[ 3.424164] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes 183 -[ 3.431006] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 184 -[ 3.437780] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 185 -[ 3.444725] ubi0: good PEBs: 298, bad PEBs: 7, corrupted PEBs: 0 186 -[ 3.450701] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128 187 -[ 3.457906] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1203044710 188 -[ 3.467015] ubi0: available PEBs: 0, total reserved PEBs: 298, PEBs reserved for bad PEB handling: 13 189 -[ 3.476230] ubi0: background thread "ubi_bgt0d" started, PID 359 190 -[ 3.477972] block ubiblock0_0: created from ubi0:0(rootfs) 191 -[ 3.487716] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem 192 -[ 3.494673] hctosys: unable to open rtc device (rtc0) 193 -[ 3.519930] VFS: Mounted root (squashfs filesystem) readonly on device 254:0. 194 -[ 3.527684] Freeing unused kernel memory: 268K 195 -[ 3.532122] This architecture does not have kernel memory protection. 196 -[ 4.017012] init: Console is alive 197 -[ 4.020616] init: - watchdog - 198 -[ 4.354210] kmodloader: loading kernel modules from /etc/modules-boot.d/* 199 -[ 4.443714] usbcore: registered new interface driver usbfs 200 -[ 4.449260] usbcore: registered new interface driver hub 201 -[ 4.454739] usbcore: registered new device driver usb 202 -[ 4.467426] SCSI subsystem initialized 203 -[ 4.480878] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator 204 -[ 4.489588] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator 205 -[ 4.498507] xhci-mtk 1e1c0000.xhci: xHCI Host Controller 206 -[ 4.503843] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1 207 -[ 4.523114] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010 208 -[ 4.532283] xhci-mtk 1e1c0000.xhci: irq 19, io mem 0x1e1c0000 209 -[ 4.538971] hub 1-0:1.0: USB hub found 210 -[ 4.542796] hub 1-0:1.0: 2 ports detected 211 -[ 4.547400] xhci-mtk 1e1c0000.xhci: xHCI Host Controller 212 -[ 4.552722] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2 213 -[ 4.560210] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed 214 -[ 4.560493] mtk_soc_eth 1e100000.ethernet eth0: port 4 link up 215 -[ 4.566816] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. 216 -[ 4.581320] hub 2-0:1.0: USB hub found 217 -[ 4.585161] hub 2-0:1.0: 1 port detected 218 -[ 4.593449] usbcore: registered new interface driver usb-storage 219 -[ 4.599693] kmodloader: done loading kernel modules from /etc/modules-boot.d/* 220 -[ 4.623240] init: - preinit - 221 -[ 5.073028] usb 1-2: new high-speed USB device number 2 using xhci-mtk 222 -[ 5.221107] mtk_soc_eth 1e100000.ethernet: PPE started 223 -[ 5.255985] usb-storage 1-2:1.0: USB Mass Storage device detected 224 -[ 5.262845] scsi host0: usb-storage 1-2:1.0 225 -Press the [f] key and hit [enter] to enter failsafe mode 226 -Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level 227 -[ 5.312718] random: procd: uninitialized urandom read (4 bytes read) 228 -[ 6.273781] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6 229 -[ 6.283479] sd 0:0:0:0: [sda] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB) 230 -[ 6.291556] sd 0:0:0:0: [sda] Write Protect is off 231 -[ 6.297040] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA 232 -[ 6.313010] sd 0:0:0:0: [sda] Attached SCSI removable disk 233 -[ 8.450677] UBIFS (ubi0:1): default file-system created 234 -[ 8.457372] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 474 235 -[ 8.568317] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data" 236 -[ 8.576154] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes 237 -[ 8.586040] UBIFS (ubi0:1): FS size: 32886784 bytes (31 MiB, 259 LEBs), journal size 1650688 bytes (1 MiB, 13 LEBs) 238 -[ 8.596442] UBIFS (ubi0:1): reserved for root: 1553323 bytes (1516 KiB) 239 -[ 8.603051] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID D42C5178-C937-4CB4-94EE-0031FFF6550A, small LPT model 240 -[ 8.617248] mount_root: overlay filesystem has not been fully initialized yet 241 -[ 8.624849] mount_root: switching to ubifs overlay 242 -[ 8.647505] urandom-seed: Seed file not found (/etc/urandom.seed) 243 -[ 8.728797] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818 244 -[ 8.743450] procd: - early - 245 -[ 8.746426] procd: - watchdog - 246 -[ 9.403107] procd: - watchdog - 247 -[ 9.406559] procd: - ubus - 248 -[ 9.457080] random: ubusd: uninitialized urandom read (4 bytes read) 249 -[ 9.464255] random: ubusd: uninitialized urandom read (4 bytes read) 250 -[ 9.470985] random: ubusd: uninitialized urandom read (4 bytes read) 251 -[ 9.478186] procd: - init - 252 -Please press Enter to activate this console. 253 -[ 9.714720] kmodloader: loading kernel modules from /etc/modules.d/* 254 -[ 9.724486] ip6_tables: (C) 2000-2006 Netfilter Core Team 255 -[ 9.738298] ip_tables: (C) 2000-2006 Netfilter Core Team 256 -[ 9.749820] nf_conntrack version 0.5.0 (4096 buckets, 16384 max) 257 -[ 9.790837] xt_time: kernel timezone is -0000 258 -[ 9.801201] PPP generic driver version 2.4.2 259 -[ 9.806822] NET: Registered protocol family 24 260 -[ 9.813785] kmodloader: done loading kernel modules from /etc/modules.d/* 261 -[ 10.951148] urandom_read: 5 callbacks suppressed 262 -[ 10.951161] random: jshn: uninitialized urandom read (4 bytes read) 263 -[ 16.501675] mtk_soc_eth 1e100000.ethernet: PPE started 264 -[ 16.512395] br-lan: port 1(eth0.2) entered blocking state 265 -[ 16.517965] br-lan: port 1(eth0.2) entered disabled state 266 -[ 16.523873] device eth0.2 entered promiscuous mode 267 -[ 16.528744] device eth0 entered promiscuous mode 268 -[ 16.537326] br-lan: port 1(eth0.2) entered blocking state 269 -[ 16.542760] br-lan: port 1(eth0.2) entered forwarding state 270 -[ 16.548768] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready 271 -[ 17.553672] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready 272 -[ 21.883773] random: crng init done 273 - 274 - 275 - 276 -BusyBox v1.30.1 () built-in shell (ash) 277 - 278 - _______ ________ __ 279 - | |.-----.-----.-----.| | | |.----.| |_ 280 - | - || _ | -__| || | | || _|| _| 281 - |_______|| __|_____|__|__||________||__| |____| 282 - |__| W I R E L E S S F R E E D O M 283 - ----------------------------------------------------- 284 - OpenWrt SNAPSHOT, r9254+122-3b40121530 285 - ----------------------------------------------------- 286 -=== WARNING! ===================================== 287 -There is no root password defined on this device! 288 -Use the "passwd" command to set up a new password 289 -in order to prevent unauthorized SSH logins. 290 --------------------------------------------------- 291 -root@OpenWrt:/# free 292 - total used free shared buff/cache available 293 -Mem: 253572 23256 224316 60 6000 203516 294 -Swap: 0 0 0 295 -root@OpenWrt:/# df -h 296 -Filesystem Size Used Available Use% Mounted on 297 -/dev/root 1.5M 1.5M 0 100% /rom 298 -tmpfs 123.8M 60.0K 123.8M 0% /tmp 299 -/dev/ubi0_1 28.3M 36.0K 26.8M 0% /overlay 300 -overlayfs:/overlay 28.3M 36.0K 26.8M 0% / 301 -tmpfs 512.0K 0 512.0K 0% /dev 302 -{{/code}} 4 +
- openwrt-ramips-mt7621-ea8100-initramfs-kernel.bin
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.CodePowered - Size
-
... ... @@ -1,1 +1,0 @@ 1 -3.2 MB - Content
- openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.CodePowered - Size
-
... ... @@ -1,1 +1,0 @@ 1 -4.3 MB - Content