Wiki source code of Openwrt for Linksys EA8100

Version 11.1 by Leon Poon on 2019/09/01 10:13
Hide last authors
Leon Poon 1.1 1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3
Leon Poon 2.1 4 [[https:~~/~~/github.com/LeonPoon/openwrt/compare/master...master-linksys_ea8100>>https://github.com/LeonPoon/openwrt/compare/master...master-linksys_ea8100]]
5
Leon Poon 11.1 6 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
Leon Poon 2.1 7
Leon Poon 11.1 8 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
9 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
Leon Poon 6.1 10
Leon Poon 11.1 11 Note that sysupgrade to a newer image is not likely to work.
12
13 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width: auto" %)
14 |[[image:1567332570723-651.png]]
15
Leon Poon 6.1 16 Dmesg:
17
18 {{code language="plain"}}
Leon Poon 11.1 19 3: Boot system code via Flash (default).
20 4: Entr boot command line interface.
21 7: Load Boot Loader code then write to Flash via Serial.
22 9: Load Boot Loader code then write to Flash via TFTP. 4
23 You choosed 2
24 0
Leon Poon 2.1 25
Leon Poon 11.1 26
27 2: System Load Linux Kernel then write to Flash via TFTP.
28 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
29 Please Input new ones /or Ctrl-C to discard
30 Input device IP () ==:
31 Input server IP () ==:
32 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
33 which kernel partition to update (1/2/3=both) (2) ==:3
34
35 NetTxPacket = 0x8FFE3200
36
37 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
38
39 NetLoop,call eth_halt !
40
41 NetLoop,call eth_init !
42 Trying Eth0 (10/100-M)
43
44 Waitting for RX_DMA_BUSY status Start... done
45
46
47 ETH_STATE_ACTIVE!!
48 TFTP from server ; our IP address is
49 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
50
51 TIMEOUT_COUNT=10,Load address: 0x80100000
52 Loading: Got ARP REPLY, set server/gtwy eth addr ()
53 Got it
54 #################################################################
55 #################################################################
56 #################################################################
57 #################################################################
58 #################################################################
59 #################################################################
60 #################################################################
61 #################################################################
62 #################################################################
63 #################################################################
64 #################################################################
65 #################################################################
66 #################################################################
67 #################################################################
68 #################################################################
69 #################################################################
70 #################################################################
71 ################################################
72 done
73 Bytes transferred = 5898496 (5a0100 hex)
74 LoadAddr=80100000 NetBootFileXferSize= 005a0100
75 ranand_erase: start:180000, len:20000
76 ..ranand_erase: start:1a0000, len:20000
77 ..ranand_erase: start:1c0000, len:20000
78 ...
79 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
80 Done!
81 ranand_erase: start:2980000, len:20000
82 ..ranand_erase: start:29a0000, len:20000
83 ..ranand_erase: start:29c0000, len:20000
84 ...
85 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
86 Done!
87 ## Booting image at bc180000 ...
88 Image Name: MIPS OpenWrt Linux-4.14.141
Leon Poon 2.1 89 Image Type: MIPS Linux Kernel Image (lzma compressed)
Leon Poon 11.1 90 Data Size: 2010110 Bytes = 1.9 MB
Leon Poon 2.1 91 Load Address: 80001000
92 Entry Point: 80001000
Leon Poon 11.1 93 ............................... Verifying Checksum ... OK
Leon Poon 2.1 94 Uncompressing Kernel Image ... OK
95 No initrd
Leon Poon 6.1 96 ## Transferring control to Linux (at address 80001000) ...
97 ## Giving linux memsize in MB, 256
Leon Poon 2.1 98
99 Starting kernel ...
100
Leon Poon 11.1 101 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
Leon Poon 2.1 102 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
103 [ 0.000000] bootconsole [early0] enabled
104 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
105 [ 0.000000] MIPS: machine is Linksys EA8100
106 [ 0.000000] Determined physical RAM map:
107 [ 0.000000] memory: 10000000 @ 00000000 (usable)
108 [ 0.000000] Initrd not found or empty - disabling initrd
109 [ 0.000000] VPE topology {2,2} total 4
110 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
111 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
112 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
113 [ 0.000000] Zone ranges:
114 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
115 [ 0.000000] HighMem empty
116 [ 0.000000] Movable zone start for each node
117 [ 0.000000] Early memory node ranges
118 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
119 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Leon Poon 11.1 120 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
121 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
122 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
Leon Poon 2.1 123 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
124 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
125 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
126 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Leon Poon 11.1 127 [ 0.000000] Writing ErrCtl register=0002c420
128 [ 0.000000] Readback ErrCtl register=0002c420
129 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
Leon Poon 2.1 130 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
131 [ 0.000000] Hierarchical RCU implementation.
132 [ 0.000000] NR_IRQS: 256
133 [ 0.000000] CPU Clock: 880MHz
134 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
135 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
136 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Leon Poon 11.1 137 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
138 [ 0.073969] pid_max: default: 32768 minimum: 301
139 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
140 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
141 [ 0.094340] Hierarchical SRCU implementation.
142 [ 0.099495] smp: Bringing up secondary CPUs ...
143 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
144 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
145 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
146 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
147 [ 0.164211] Synchronize counters for CPU 1: done.
148 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
149 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
150 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
151 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
152 [ 0.255179] Synchronize counters for CPU 2: done.
153 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
154 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
155 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
156 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
157 [ 0.340367] Synchronize counters for CPU 3: done.
158 [ 0.370232] smp: Brought up 1 node, 4 CPUs
159 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
160 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
161 [ 0.394408] pinctrl core: initialized pinctrl subsystem
162 [ 0.401009] NET: Registered protocol family 16
163 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
164 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
165 [ 0.725598] ***** Xtal 40MHz *****
166 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
167 [ 0.734049] Port 0 N_FTS = 1b102800
168 [ 0.737517] Port 1 N_FTS = 1b102800
169 [ 0.740963] Port 2 N_FTS = 1b102800
170 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
171 [ 1.900719] -> 21007f2
172 [ 1.903123] PCIE0 enabled
173 [ 1.905712] PCIE1 enabled
174 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
175 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
176 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
177 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
178 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
179 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
180 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
181 [ 1.958178] PCI host bridge to bus 0000:00
182 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
183 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
184 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
185 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
186 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
187 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
188 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
189 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
190 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
191 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
192 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
193 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
194 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
195 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
196 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
197 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
198 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
199 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
200 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
201 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
202 [ 2.100582] clocksource: Switched to clocksource GIC
203 [ 2.107275] NET: Registered protocol family 2
204 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
205 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
206 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
207 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
208 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
209 [ 2.144212] NET: Registered protocol family 1
210 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
211 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
212 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
213 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
214 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
215 [ 2.425815] random: fast init done
216 [ 2.430745] io scheduler noop registered
217 [ 2.434579] io scheduler deadline registered (default)
218 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
219 [ 2.448257] console [ttyS0] disabled
220 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
221 [ 2.460836] console [ttyS0] enabled
222 [ 2.460836] console [ttyS0] enabled
223 [ 2.467691] bootconsole [early0] disabled
224 [ 2.467691] bootconsole [early0] disabled
225 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
226 [ 2.484816] Enable NFI Clock
227 [ 2.487689] # MTK NAND # : Use HW ECC
228 [ 2.491382] Device not found, ID: c2f1
229 [ 2.495110] Not Support this Device!
230 [ 2.498835] chip_mode=00000001
231 [ 2.501893] Support this Device in MTK table! c2f1
232 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
233 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
234 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
235 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
236 [ 2.531927] Scanning device for bad blocks
237 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
238 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
239 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
240 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
241 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
242 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
243 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
244 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
245 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
246 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
247 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
248 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
249 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
250 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
251 [ 3.456742] [mtk_nand] probe successfully!
252 [ 3.461570] Signature matched and data read!
253 [ 3.465818] load_fact_bbt success 1023
254 [ 3.470276] libphy: Fixed MDIO Bus: probed
255 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
256 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
257 [ 3.556774] libphy: mdio: probed
258 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
259 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
260 [ 4.978262] NET: Registered protocol family 10
261 [ 4.984286] Segment Routing with IPv6
262 [ 4.988020] NET: Registered protocol family 17
263 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
264 [ 4.999621] UBI: auto-attach mtd9
265 [ 5.003015] ubi0: attaching mtd9
266 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
267 [ 5.039967] ubi0: scanning is finished
268 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
269 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
270 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
271 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
272 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
273 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
274 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
275 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
276 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
277 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
278 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
279 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
280 [ 5.165234] hctosys: unable to open rtc device (rtc0)
281 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
282 [ 5.195491] Freeing unused kernel memory: 1260K
283 [ 5.200022] This architecture does not have kernel memory protection.
284 [ 5.783744] init: Console is alive
285 [ 5.787378] init: - watchdog -
286 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
287 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
288 [ 6.591413] usbcore: registered new interface driver usbfs
289 [ 6.596966] usbcore: registered new interface driver hub
290 [ 6.602453] usbcore: registered new device driver usb
291 [ 6.615285] SCSI subsystem initialized
292 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
293 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
294 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
295 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
296 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
297 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
298 [ 6.676639] hub 1-0:1.0: USB hub found
299 [ 6.680467] hub 1-0:1.0: 2 ports detected
300 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
301 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
302 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
303 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
304 [ 6.713446] hub 2-0:1.0: USB hub found
305 [ 6.717275] hub 2-0:1.0: 1 port detected
306 [ 6.727313] usbcore: registered new interface driver usb-storage
307 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
308 [ 6.750877] init: - preinit -
309 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
310 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
311 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
312 [ 7.225920] scsi host0: usb-storage 2-1:1.0
313 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
Leon Poon 2.1 314 Press the [f] key and hit [enter] to enter failsafe mode
315 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Leon Poon 11.1 316 [ 10.582466] UBIFS (ubi0:1): default file-system created
317 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
318 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
319 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
320 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
321 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
322 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
323 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
324 [ 10.756981] mount_root: switching to ubifs overlay
325 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
326 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
327 [ 10.876085] procd: - early -
328 [ 10.879061] procd: - watchdog -
329 [ 11.550737] procd: - watchdog -
330 [ 11.554202] procd: - ubus -
331 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
332 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
333 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
334 [ 11.625387] procd: - init -
Leon Poon 2.1 335 Please press Enter to activate this console.
Leon Poon 11.1 336 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
337 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
338 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
339 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
340 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
341 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
342 [ 12.127574] urngd: v1.0.0 started.
343 [ 12.145053] xt_time: kernel timezone is -0000
344 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
345 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
346 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
347 [ 12.241178]
348 [ 12.266469] random: crng init done
349 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
350 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
351 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
352 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
353 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
354 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
355 [ 20.161193]
356 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
357 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
358 [ 27.852570] PPP generic driver version 2.4.2
359 [ 27.858358] NET: Registered protocol family 24
360 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
361 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
362 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
363 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
364 [ 41.299522] device eth0.2 entered promiscuous mode
365 [ 41.304484] device eth0 entered promiscuous mode
366 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
367 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
368 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
369 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Leon Poon 2.1 370
371
372
Leon Poon 11.1 373 BusyBox v1.31.0 () built-in shell (ash)
374
Leon Poon 6.1 375 _______ ________ __
376 | |.-----.-----.-----.| | | |.----.| |_
377 | - || _ | -__| || | | || _|| _|
378 |_______|| __|_____|__|__||________||__| |____|
379 |__| W I R E L E S S F R E E D O M
380 -----------------------------------------------------
Leon Poon 11.1 381 OpenWrt SNAPSHOT, r10942-9bebafcb5d
Leon Poon 6.1 382 -----------------------------------------------------
383 === WARNING! =====================================
Leon Poon 2.1 384 There is no root password defined on this device!
385 Use the "passwd" command to set up a new password
386 in order to prevent unauthorized SSH logins.
Leon Poon 6.1 387 --------------------------------------------------
Leon Poon 11.1 388 root@OpenWrt:/# ifconfig -a
389 br-lan Link encap:Ethernet HWaddr
390 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
391 inet6 addr: fde0:62db:5134::1/60 Scope:Global
392 inet6 addr: fe80::/64 Scope:Link
393 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
394 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
395 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
396 collisions:0 txqueuelen:1000
397 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
398
399 eth0 Link encap:Ethernet HWaddr
400 inet6 addr: fe80::/64 Scope:Link
401 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
402 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
403 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
404 collisions:0 txqueuelen:1000
405 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
406 Interrupt:21
407
408 eth0.1 Link encap:Ethernet HWaddr
409 inet6 addr: fe80::/64 Scope:Link
410 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
411 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
412 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
413 collisions:0 txqueuelen:1000
414 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
415
416 eth0.2 Link encap:Ethernet HWaddr
417 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
418 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
419 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
420 collisions:0 txqueuelen:1000
421 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
422
423 lo Link encap:Local Loopback
424 inet addr:127.0.0.1 Mask:255.0.0.0
425 inet6 addr: ::1/128 Scope:Host
426 UP LOOPBACK RUNNING MTU:65536 Metric:1
427 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
428 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
429 collisions:0 txqueuelen:1000
430 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
431
432 wlan0 Link encap:Ethernet HWaddr
433 BROADCAST MULTICAST MTU:1500 Metric:1
434 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
435 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
436 collisions:0 txqueuelen:1000
437 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
438
439 wlan1 Link encap:Ethernet HWaddr
440 BROADCAST MULTICAST MTU:1500 Metric:1
441 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
442 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
443 collisions:0 txqueuelen:1000
444 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
445
446 root@OpenWrt:/# ls -l
447 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
448 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
449 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
450 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
451 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
452 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
453 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
454 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
455 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
456 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
457 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
458 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
459 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
460 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
461 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
462 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
463 root@OpenWrt:/# ps
464 PID USER VSZ STAT COMMAND
465 1 root 1576 S /sbin/procd
466 2 root 0 SW [kthreadd]
467 3 root 0 IW [kworker/0:0]
468 4 root 0 IW< [kworker/0:0H]
469 5 root 0 IW [kworker/u8:0]
470 6 root 0 IW< [mm_percpu_wq]
471 7 root 0 SW [ksoftirqd/0]
472 8 root 0 IW [rcu_sched]
473 9 root 0 IW [rcu_bh]
474 10 root 0 SW [migration/0]
475 11 root 0 SW [cpuhp/0]
476 12 root 0 SW [cpuhp/1]
477 13 root 0 SW [migration/1]
478 14 root 0 SW [ksoftirqd/1]
479 16 root 0 IW< [kworker/1:0H]
480 17 root 0 SW [cpuhp/2]
481 18 root 0 SW [migration/2]
482 19 root 0 SW [ksoftirqd/2]
483 21 root 0 IW< [kworker/2:0H]
484 22 root 0 SW [cpuhp/3]
485 23 root 0 SW [migration/3]
486 24 root 0 SW [ksoftirqd/3]
487 25 root 0 IW [kworker/3:0]
488 26 root 0 IW< [kworker/3:0H]
489 27 root 0 IW< [netns]
490 41 root 0 IW [kworker/u8:3]
491 68 root 0 IW [kworker/3:1]
492 69 root 0 IW [kworker/2:1]
493 138 root 0 IW [kworker/1:1]
494 139 root 0 SW [oom_reaper]
495 140 root 0 IW< [writeback]
496 142 root 0 SW [kcompactd0]
497 143 root 0 IW< [crypto]
498 145 root 0 IW< [kblockd]
499 175 root 0 IW< [watchdogd]
500 199 root 0 SW [kswapd0]
501 268 root 0 IW< [pencrypt]
502 270 root 0 IW< [pdecrypt]
503 366 root 0 IW< [ipv6_addrconf]
504 378 root 0 SW [ubi_bgt0d]
505 383 root 0 IW< [kworker/0:1H]
506 384 root 0 IW< [kworker/2:1H]
507 385 root 0 IW [kworker/2:2]
508 386 root 0 IW< [kworker/3:1H]
509 389 root 0 IW< [kworker/1:1H]
510 429 root 0 IW [kworker/0:2]
511 437 root 0 IW [kworker/1:2]
512 453 root 0 SW [scsi_eh_0]
513 454 root 0 IW< [scsi_tmf_0]
514 455 root 0 SW [usb-storage]
515 496 root 0 SW [ubifs_bgt0_1]
516 573 root 1220 S /sbin/ubusd
517 574 root 1220 S /bin/ash --login
518 591 root 1028 S /sbin/urngd
519 660 root 0 IW< [cfg80211]
520 1012 root 1248 S /sbin/logd -S 64
521 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
522 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
523 1168 root 1700 S /sbin/netifd
524 1204 root 1448 S /usr/sbin/odhcpd
525 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
526 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
527 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
528 1720 root 1212 R ps
529 root@OpenWrt:/etc# ping www.google.co
530 PING www.google.co (): 56 data bytes
531 64 bytes from : seq=0 ttl=52 time=4.718 ms
532 ^C
533 --- www.google.co ping statistics ---
534 1 packets transmitted, 1 packets received, 0% packet loss
535 round-trip min/avg/max = 4.718/4.718/4.718 ms
536 root@OpenWrt:/etc# ping www.google.com
537 PING www.google.com (): 56 data bytes
538 64 bytes from : seq=0 ttl=47 time=4.927 ms
539 64 bytes from : seq=1 ttl=47 time=4.687 ms
540 ^C
541 --- www.google.com ping statistics ---
542 2 packets transmitted, 2 packets received, 0% packet loss
543 round-trip min/avg/max = 4.687/4.807/4.927 ms
544 root@OpenWrt:/etc# opkg update
545 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
546 Updated list of available packages in /var/opkg-lists/openwrt_core
547 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
548 Signature check passed.
549 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
550 Updated list of available packages in /var/opkg-lists/openwrt_base
551 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
552 Signature check passed.
553 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
554 Updated list of available packages in /var/opkg-lists/openwrt_luci
555 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
556 Signature check passed.
557 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
558 Updated list of available packages in /var/opkg-lists/openwrt_packages
559 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
560 Signature check passed.
561 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
562 Updated list of available packages in /var/opkg-lists/openwrt_routing
563 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
564 Signature check passed.
565 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
566 Updated list of available packages in /var/opkg-lists/openwrt_telephony
567 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
568 Signature check passed.
569 root@OpenWrt:/etc# opkg install luci
570 Installing luci (git-19.241.65047-dffe9ca-1) to root...
571 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
572 Installing uhttpd (2019-08-17-6b03f960-3) to root...
573 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
574 Installing liblua5.1.5 (5.1.5-5) to root...
575 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
576 Installing lua (5.1.5-5) to root...
577 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
578 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
579 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
580 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
581 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
582 Installing rpcd (2019-06-05-89bfaa42-3) to root...
583 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
584 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
585 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
586 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
587 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
588 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
589 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
590 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
591 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
592 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
593 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
594 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
595 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
596 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
597 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
598 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
599 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
600 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
601 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
602 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
603 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
604 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
605 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
606 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
607 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
608 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
609 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
610 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
611 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
612 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
613 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
614 Installing rpcd-mod-rrdns (20170710) to root...
615 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
616 Configuring liblucihttp0.
617 Configuring luci-app-opkg.
618 Configuring rpcd.
619 Configuring liblua5.1.5.
620 Configuring luci-lib-ip.
621 Configuring libubus-lua.
622 Configuring libiwinfo-lua.
623 Configuring lua.
624 Configuring luci-lib-nixio.
625 Configuring luci-lib-jsonc.
626 Configuring liblucihttp-lua.
627 Configuring luci-base.
628 Configuring luci-mod-system.
629 Configuring luci-theme-bootstrap.
630 Configuring luci-mod-status.
631 Configuring luci-app-firewall.
632 Configuring luci-proto-ppp.
633 Configuring luci-mod-network.
634 Configuring luci-mod-admin-full.
635 Configuring luci-proto-ipv6.
636 Configuring uhttpd.
637 Configuring rpcd-mod-rrdns.
638 Configuring luci.
639 root@OpenWrt:/etc# df -h
Leon Poon 2.1 640 Filesystem Size Used Available Use% Mounted on
Leon Poon 11.1 641 /dev/root 2.8M 2.8M 0 100% /rom
642 tmpfs 123.5M 764.0K 122.8M 1% /tmp
643 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
644 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
Leon Poon 6.1 645 tmpfs 512.0K 0 512.0K 0% /dev
Leon Poon 11.1 646 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
647 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
648 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
649 [ 2075.984368] device wlan0 entered promiscuous mode
650 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
651 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
652 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
653 [ 2096.494533] device wlan0 left promiscuous mode
654 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
655 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
656 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
657 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
658 [ 2097.404922] device wlan0 entered promiscuous mode
659 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
660 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
661 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
662 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
663 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
664 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
665 [ 2117.964353] device wlan0 left promiscuous mode
666 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
667 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
668 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
669 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
670 [ 2118.804171] device wlan0 entered promiscuous mode
671 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
672 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
673 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
674 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
675 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
676 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
677 [ 2245.748473] device wlan0 left promiscuous mode
678 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
679 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
680 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
681 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
682 [ 2246.557667] device wlan0 entered promiscuous mode
683 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
684 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
685 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
686 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
687 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
688 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
689
690 root@OpenWrt:/etc#
691 root@OpenWrt:/etc# uci show wireless
692 wireless.radio0=wifi-device
693 wireless.radio0.type='mac80211'
694 wireless.radio0.channel='11'
695 wireless.radio0.hwmode='11g'
696 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
697 wireless.radio0.country='00'
698 wireless.radio0.legacy_rates='1'
699 wireless.radio0.htmode='HT20'
700 wireless.default_radio0=wifi-iface
701 wireless.default_radio0.device='radio0'
702 wireless.default_radio0.network='lan'
703 wireless.default_radio0.mode='ap'
704 wireless.default_radio0.encryption='psk2'
705 wireless.default_radio0.key='qwerty1234'
706 wireless.default_radio0.ssid='asdf'
707 wireless.radio1=wifi-device
708 wireless.radio1.type='mac80211'
709 wireless.radio1.channel='36'
710 wireless.radio1.hwmode='11a'
711 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
712 wireless.radio1.htmode='VHT80'
713 wireless.radio1.__toggle='Enable'
714 wireless.radio1.country='00'
715 wireless.radio1.legacy_rates='1'
716 wireless.default_radio1=wifi-iface
717 wireless.default_radio1.device='radio1'
718 wireless.default_radio1.network='lan'
719 wireless.default_radio1.mode='ap'
720 wireless.default_radio1.ssid='asdf'
721 wireless.default_radio1.encryption='psk2'
722 wireless.default_radio1.key='qwerty1234'
723 root@OpenWrt:/etc#
Leon Poon 6.1 724 {{/code}}