Wiki source code of Openwrt for Linksys EA8100

Version 14.1 by Leon Poon on 2020/05/31 11:02
Hide last authors
Leon Poon 1.1 1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3
Leon Poon 2.1 4
Leon Poon 13.1 5 = 19.07.x =
6
Leon Poon 14.1 7 [[https:~~/~~/www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/>>url:https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]] ([[https:~~/~~/github.com/LeonPoon/openwrt/compare/v19.07.3...v19.07.3-linksys_ea8100>>url:https://github.com/LeonPoon/openwrt/compare/v19.07.3...v19.07.3-linksys_ea8100]])
Leon Poon 13.1 8
9 The EA8100 contains 2 firmware partitions. Flashing via the Linksys UI will only flash openwrt into one of the 2 partitions.
10
Leon Poon 14.1 11 If your router currently has stock Linksys firmware, flash the "squashfs-factory.img" via Linksys UI. After you flashed the factory img one time, you should set root password (do not configure/restart), log in via ssh and download the "squashfs-sysupgrade.bin" into /tmp and run sysupgrade to flash this .bin to both firmware partitions.
Leon Poon 13.1 12
Leon Poon 14.1 13 If you are on my 18.x below, doing sysupgrade to 19.07.x will not work. You have to manually mtd write the "squashfs-sysupgrade.bin" into the firmware1 & firmware2 partitions.
Leon Poon 13.1 14
Leon Poon 14.1 15 Subsequently sysupgrade from 19.07.x should work but it will **not **save config! Back up your config and other files in the router before you sysupgrade.
Leon Poon 13.1 16
Leon Poon 14.1 17 Wifi seem to work at 30-40MB/s with a MacBook Pro.
Leon Poon 13.1 18
Leon Poon 14.1 19
Leon Poon 13.1 20 = 18.x =
21
Leon Poon 11.1 22 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
Leon Poon 2.1 23
Leon Poon 11.1 24 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
25 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
Leon Poon 6.1 26
Leon Poon 11.1 27 Note that sysupgrade to a newer image is not likely to work.
28
Leon Poon 12.1 29 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
Leon Poon 11.1 30 |[[image:1567332570723-651.png]]
31
Leon Poon 6.1 32 Dmesg:
33
34 {{code language="plain"}}
Leon Poon 11.1 35 3: Boot system code via Flash (default).
36 4: Entr boot command line interface.
37 7: Load Boot Loader code then write to Flash via Serial.
38 9: Load Boot Loader code then write to Flash via TFTP. 4
39 You choosed 2
40 0
Leon Poon 2.1 41
Leon Poon 11.1 42
43 2: System Load Linux Kernel then write to Flash via TFTP.
44 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
45 Please Input new ones /or Ctrl-C to discard
46 Input device IP () ==:
47 Input server IP () ==:
48 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
49 which kernel partition to update (1/2/3=both) (2) ==:3
50
51 NetTxPacket = 0x8FFE3200
52
53 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
54
55 NetLoop,call eth_halt !
56
57 NetLoop,call eth_init !
58 Trying Eth0 (10/100-M)
59
60 Waitting for RX_DMA_BUSY status Start... done
61
62
63 ETH_STATE_ACTIVE!!
64 TFTP from server ; our IP address is
65 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
66
67 TIMEOUT_COUNT=10,Load address: 0x80100000
68 Loading: Got ARP REPLY, set server/gtwy eth addr ()
69 Got it
70 #################################################################
71 #################################################################
72 #################################################################
73 #################################################################
74 #################################################################
75 #################################################################
76 #################################################################
77 #################################################################
78 #################################################################
79 #################################################################
80 #################################################################
81 #################################################################
82 #################################################################
83 #################################################################
84 #################################################################
85 #################################################################
86 #################################################################
87 ################################################
88 done
89 Bytes transferred = 5898496 (5a0100 hex)
90 LoadAddr=80100000 NetBootFileXferSize= 005a0100
91 ranand_erase: start:180000, len:20000
92 ..ranand_erase: start:1a0000, len:20000
93 ..ranand_erase: start:1c0000, len:20000
94 ...
95 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
96 Done!
97 ranand_erase: start:2980000, len:20000
98 ..ranand_erase: start:29a0000, len:20000
99 ..ranand_erase: start:29c0000, len:20000
100 ...
101 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
102 Done!
103 ## Booting image at bc180000 ...
104 Image Name: MIPS OpenWrt Linux-4.14.141
Leon Poon 2.1 105 Image Type: MIPS Linux Kernel Image (lzma compressed)
Leon Poon 11.1 106 Data Size: 2010110 Bytes = 1.9 MB
Leon Poon 2.1 107 Load Address: 80001000
108 Entry Point: 80001000
Leon Poon 11.1 109 ............................... Verifying Checksum ... OK
Leon Poon 2.1 110 Uncompressing Kernel Image ... OK
111 No initrd
Leon Poon 6.1 112 ## Transferring control to Linux (at address 80001000) ...
113 ## Giving linux memsize in MB, 256
Leon Poon 2.1 114
115 Starting kernel ...
116
Leon Poon 11.1 117 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
Leon Poon 2.1 118 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
119 [ 0.000000] bootconsole [early0] enabled
120 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
121 [ 0.000000] MIPS: machine is Linksys EA8100
122 [ 0.000000] Determined physical RAM map:
123 [ 0.000000] memory: 10000000 @ 00000000 (usable)
124 [ 0.000000] Initrd not found or empty - disabling initrd
125 [ 0.000000] VPE topology {2,2} total 4
126 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
127 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
128 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
129 [ 0.000000] Zone ranges:
130 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
131 [ 0.000000] HighMem empty
132 [ 0.000000] Movable zone start for each node
133 [ 0.000000] Early memory node ranges
134 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
135 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Leon Poon 11.1 136 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
137 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
138 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
Leon Poon 2.1 139 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
140 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
141 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
142 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Leon Poon 11.1 143 [ 0.000000] Writing ErrCtl register=0002c420
144 [ 0.000000] Readback ErrCtl register=0002c420
145 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
Leon Poon 2.1 146 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
147 [ 0.000000] Hierarchical RCU implementation.
148 [ 0.000000] NR_IRQS: 256
149 [ 0.000000] CPU Clock: 880MHz
150 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
151 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
152 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Leon Poon 11.1 153 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
154 [ 0.073969] pid_max: default: 32768 minimum: 301
155 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
156 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
157 [ 0.094340] Hierarchical SRCU implementation.
158 [ 0.099495] smp: Bringing up secondary CPUs ...
159 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
160 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
161 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
162 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
163 [ 0.164211] Synchronize counters for CPU 1: done.
164 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
165 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
166 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
167 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
168 [ 0.255179] Synchronize counters for CPU 2: done.
169 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
170 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
171 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
172 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
173 [ 0.340367] Synchronize counters for CPU 3: done.
174 [ 0.370232] smp: Brought up 1 node, 4 CPUs
175 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
176 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
177 [ 0.394408] pinctrl core: initialized pinctrl subsystem
178 [ 0.401009] NET: Registered protocol family 16
179 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
180 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
181 [ 0.725598] ***** Xtal 40MHz *****
182 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
183 [ 0.734049] Port 0 N_FTS = 1b102800
184 [ 0.737517] Port 1 N_FTS = 1b102800
185 [ 0.740963] Port 2 N_FTS = 1b102800
186 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
187 [ 1.900719] -> 21007f2
188 [ 1.903123] PCIE0 enabled
189 [ 1.905712] PCIE1 enabled
190 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
191 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
192 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
193 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
194 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
195 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
196 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
197 [ 1.958178] PCI host bridge to bus 0000:00
198 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
199 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
200 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
201 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
202 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
203 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
204 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
205 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
206 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
207 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
208 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
209 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
210 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
211 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
212 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
213 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
214 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
215 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
216 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
217 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
218 [ 2.100582] clocksource: Switched to clocksource GIC
219 [ 2.107275] NET: Registered protocol family 2
220 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
221 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
222 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
223 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
224 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
225 [ 2.144212] NET: Registered protocol family 1
226 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
227 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
228 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
229 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
230 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
231 [ 2.425815] random: fast init done
232 [ 2.430745] io scheduler noop registered
233 [ 2.434579] io scheduler deadline registered (default)
234 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
235 [ 2.448257] console [ttyS0] disabled
236 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
237 [ 2.460836] console [ttyS0] enabled
238 [ 2.460836] console [ttyS0] enabled
239 [ 2.467691] bootconsole [early0] disabled
240 [ 2.467691] bootconsole [early0] disabled
241 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
242 [ 2.484816] Enable NFI Clock
243 [ 2.487689] # MTK NAND # : Use HW ECC
244 [ 2.491382] Device not found, ID: c2f1
245 [ 2.495110] Not Support this Device!
246 [ 2.498835] chip_mode=00000001
247 [ 2.501893] Support this Device in MTK table! c2f1
248 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
249 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
250 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
251 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
252 [ 2.531927] Scanning device for bad blocks
253 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
254 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
255 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
256 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
257 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
258 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
259 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
260 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
261 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
262 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
263 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
264 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
265 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
266 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
267 [ 3.456742] [mtk_nand] probe successfully!
268 [ 3.461570] Signature matched and data read!
269 [ 3.465818] load_fact_bbt success 1023
270 [ 3.470276] libphy: Fixed MDIO Bus: probed
271 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
272 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
273 [ 3.556774] libphy: mdio: probed
274 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
275 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
276 [ 4.978262] NET: Registered protocol family 10
277 [ 4.984286] Segment Routing with IPv6
278 [ 4.988020] NET: Registered protocol family 17
279 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
280 [ 4.999621] UBI: auto-attach mtd9
281 [ 5.003015] ubi0: attaching mtd9
282 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
283 [ 5.039967] ubi0: scanning is finished
284 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
285 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
286 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
287 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
288 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
289 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
290 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
291 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
292 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
293 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
294 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
295 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
296 [ 5.165234] hctosys: unable to open rtc device (rtc0)
297 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
298 [ 5.195491] Freeing unused kernel memory: 1260K
299 [ 5.200022] This architecture does not have kernel memory protection.
300 [ 5.783744] init: Console is alive
301 [ 5.787378] init: - watchdog -
302 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
303 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
304 [ 6.591413] usbcore: registered new interface driver usbfs
305 [ 6.596966] usbcore: registered new interface driver hub
306 [ 6.602453] usbcore: registered new device driver usb
307 [ 6.615285] SCSI subsystem initialized
308 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
309 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
310 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
311 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
312 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
313 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
314 [ 6.676639] hub 1-0:1.0: USB hub found
315 [ 6.680467] hub 1-0:1.0: 2 ports detected
316 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
317 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
318 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
319 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
320 [ 6.713446] hub 2-0:1.0: USB hub found
321 [ 6.717275] hub 2-0:1.0: 1 port detected
322 [ 6.727313] usbcore: registered new interface driver usb-storage
323 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
324 [ 6.750877] init: - preinit -
325 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
326 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
327 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
328 [ 7.225920] scsi host0: usb-storage 2-1:1.0
329 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
Leon Poon 2.1 330 Press the [f] key and hit [enter] to enter failsafe mode
331 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Leon Poon 11.1 332 [ 10.582466] UBIFS (ubi0:1): default file-system created
333 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
334 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
335 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
336 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
337 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
338 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
339 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
340 [ 10.756981] mount_root: switching to ubifs overlay
341 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
342 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
343 [ 10.876085] procd: - early -
344 [ 10.879061] procd: - watchdog -
345 [ 11.550737] procd: - watchdog -
346 [ 11.554202] procd: - ubus -
347 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
348 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
349 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
350 [ 11.625387] procd: - init -
Leon Poon 2.1 351 Please press Enter to activate this console.
Leon Poon 11.1 352 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
353 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
354 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
355 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
356 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
357 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
358 [ 12.127574] urngd: v1.0.0 started.
359 [ 12.145053] xt_time: kernel timezone is -0000
360 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
361 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
362 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
363 [ 12.241178]
364 [ 12.266469] random: crng init done
365 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
366 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
367 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
368 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
369 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
370 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
371 [ 20.161193]
372 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
373 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
374 [ 27.852570] PPP generic driver version 2.4.2
375 [ 27.858358] NET: Registered protocol family 24
376 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
377 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
378 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
379 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
380 [ 41.299522] device eth0.2 entered promiscuous mode
381 [ 41.304484] device eth0 entered promiscuous mode
382 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
383 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
384 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
385 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Leon Poon 2.1 386
387
388
Leon Poon 11.1 389 BusyBox v1.31.0 () built-in shell (ash)
390
Leon Poon 6.1 391 _______ ________ __
392 | |.-----.-----.-----.| | | |.----.| |_
393 | - || _ | -__| || | | || _|| _|
394 |_______|| __|_____|__|__||________||__| |____|
395 |__| W I R E L E S S F R E E D O M
396 -----------------------------------------------------
Leon Poon 11.1 397 OpenWrt SNAPSHOT, r10942-9bebafcb5d
Leon Poon 6.1 398 -----------------------------------------------------
399 === WARNING! =====================================
Leon Poon 2.1 400 There is no root password defined on this device!
401 Use the "passwd" command to set up a new password
402 in order to prevent unauthorized SSH logins.
Leon Poon 6.1 403 --------------------------------------------------
Leon Poon 11.1 404 root@OpenWrt:/# ifconfig -a
405 br-lan Link encap:Ethernet HWaddr
406 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
407 inet6 addr: fde0:62db:5134::1/60 Scope:Global
408 inet6 addr: fe80::/64 Scope:Link
409 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
410 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
411 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
412 collisions:0 txqueuelen:1000
413 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
414
415 eth0 Link encap:Ethernet HWaddr
416 inet6 addr: fe80::/64 Scope:Link
417 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
418 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
419 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
420 collisions:0 txqueuelen:1000
421 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
422 Interrupt:21
423
424 eth0.1 Link encap:Ethernet HWaddr
425 inet6 addr: fe80::/64 Scope:Link
426 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
427 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
428 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
429 collisions:0 txqueuelen:1000
430 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
431
432 eth0.2 Link encap:Ethernet HWaddr
433 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
434 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
435 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
436 collisions:0 txqueuelen:1000
437 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
438
439 lo Link encap:Local Loopback
440 inet addr:127.0.0.1 Mask:255.0.0.0
441 inet6 addr: ::1/128 Scope:Host
442 UP LOOPBACK RUNNING MTU:65536 Metric:1
443 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
444 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
445 collisions:0 txqueuelen:1000
446 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
447
448 wlan0 Link encap:Ethernet HWaddr
449 BROADCAST MULTICAST MTU:1500 Metric:1
450 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
451 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
452 collisions:0 txqueuelen:1000
453 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
454
455 wlan1 Link encap:Ethernet HWaddr
456 BROADCAST MULTICAST MTU:1500 Metric:1
457 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
458 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
459 collisions:0 txqueuelen:1000
460 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
461
462 root@OpenWrt:/# ls -l
463 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
464 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
465 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
466 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
467 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
468 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
469 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
470 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
471 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
472 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
473 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
474 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
475 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
476 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
477 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
478 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
479 root@OpenWrt:/# ps
480 PID USER VSZ STAT COMMAND
481 1 root 1576 S /sbin/procd
482 2 root 0 SW [kthreadd]
483 3 root 0 IW [kworker/0:0]
484 4 root 0 IW< [kworker/0:0H]
485 5 root 0 IW [kworker/u8:0]
486 6 root 0 IW< [mm_percpu_wq]
487 7 root 0 SW [ksoftirqd/0]
488 8 root 0 IW [rcu_sched]
489 9 root 0 IW [rcu_bh]
490 10 root 0 SW [migration/0]
491 11 root 0 SW [cpuhp/0]
492 12 root 0 SW [cpuhp/1]
493 13 root 0 SW [migration/1]
494 14 root 0 SW [ksoftirqd/1]
495 16 root 0 IW< [kworker/1:0H]
496 17 root 0 SW [cpuhp/2]
497 18 root 0 SW [migration/2]
498 19 root 0 SW [ksoftirqd/2]
499 21 root 0 IW< [kworker/2:0H]
500 22 root 0 SW [cpuhp/3]
501 23 root 0 SW [migration/3]
502 24 root 0 SW [ksoftirqd/3]
503 25 root 0 IW [kworker/3:0]
504 26 root 0 IW< [kworker/3:0H]
505 27 root 0 IW< [netns]
506 41 root 0 IW [kworker/u8:3]
507 68 root 0 IW [kworker/3:1]
508 69 root 0 IW [kworker/2:1]
509 138 root 0 IW [kworker/1:1]
510 139 root 0 SW [oom_reaper]
511 140 root 0 IW< [writeback]
512 142 root 0 SW [kcompactd0]
513 143 root 0 IW< [crypto]
514 145 root 0 IW< [kblockd]
515 175 root 0 IW< [watchdogd]
516 199 root 0 SW [kswapd0]
517 268 root 0 IW< [pencrypt]
518 270 root 0 IW< [pdecrypt]
519 366 root 0 IW< [ipv6_addrconf]
520 378 root 0 SW [ubi_bgt0d]
521 383 root 0 IW< [kworker/0:1H]
522 384 root 0 IW< [kworker/2:1H]
523 385 root 0 IW [kworker/2:2]
524 386 root 0 IW< [kworker/3:1H]
525 389 root 0 IW< [kworker/1:1H]
526 429 root 0 IW [kworker/0:2]
527 437 root 0 IW [kworker/1:2]
528 453 root 0 SW [scsi_eh_0]
529 454 root 0 IW< [scsi_tmf_0]
530 455 root 0 SW [usb-storage]
531 496 root 0 SW [ubifs_bgt0_1]
532 573 root 1220 S /sbin/ubusd
533 574 root 1220 S /bin/ash --login
534 591 root 1028 S /sbin/urngd
535 660 root 0 IW< [cfg80211]
536 1012 root 1248 S /sbin/logd -S 64
537 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
538 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
539 1168 root 1700 S /sbin/netifd
540 1204 root 1448 S /usr/sbin/odhcpd
541 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
542 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
543 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
544 1720 root 1212 R ps
545 root@OpenWrt:/etc# ping www.google.co
546 PING www.google.co (): 56 data bytes
547 64 bytes from : seq=0 ttl=52 time=4.718 ms
548 ^C
549 --- www.google.co ping statistics ---
550 1 packets transmitted, 1 packets received, 0% packet loss
551 round-trip min/avg/max = 4.718/4.718/4.718 ms
552 root@OpenWrt:/etc# ping www.google.com
553 PING www.google.com (): 56 data bytes
554 64 bytes from : seq=0 ttl=47 time=4.927 ms
555 64 bytes from : seq=1 ttl=47 time=4.687 ms
556 ^C
557 --- www.google.com ping statistics ---
558 2 packets transmitted, 2 packets received, 0% packet loss
559 round-trip min/avg/max = 4.687/4.807/4.927 ms
560 root@OpenWrt:/etc# opkg update
561 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
562 Updated list of available packages in /var/opkg-lists/openwrt_core
563 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
564 Signature check passed.
565 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
566 Updated list of available packages in /var/opkg-lists/openwrt_base
567 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
568 Signature check passed.
569 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
570 Updated list of available packages in /var/opkg-lists/openwrt_luci
571 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
572 Signature check passed.
573 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
574 Updated list of available packages in /var/opkg-lists/openwrt_packages
575 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
576 Signature check passed.
577 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
578 Updated list of available packages in /var/opkg-lists/openwrt_routing
579 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
580 Signature check passed.
581 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
582 Updated list of available packages in /var/opkg-lists/openwrt_telephony
583 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
584 Signature check passed.
585 root@OpenWrt:/etc# opkg install luci
586 Installing luci (git-19.241.65047-dffe9ca-1) to root...
587 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
588 Installing uhttpd (2019-08-17-6b03f960-3) to root...
589 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
590 Installing liblua5.1.5 (5.1.5-5) to root...
591 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
592 Installing lua (5.1.5-5) to root...
593 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
594 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
595 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
596 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
597 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
598 Installing rpcd (2019-06-05-89bfaa42-3) to root...
599 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
600 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
601 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
602 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
603 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
604 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
605 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
606 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
607 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
608 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
609 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
610 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
611 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
612 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
613 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
614 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
615 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
616 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
617 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
618 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
619 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
620 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
621 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
622 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
623 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
624 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
625 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
626 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
627 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
628 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
629 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
630 Installing rpcd-mod-rrdns (20170710) to root...
631 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
632 Configuring liblucihttp0.
633 Configuring luci-app-opkg.
634 Configuring rpcd.
635 Configuring liblua5.1.5.
636 Configuring luci-lib-ip.
637 Configuring libubus-lua.
638 Configuring libiwinfo-lua.
639 Configuring lua.
640 Configuring luci-lib-nixio.
641 Configuring luci-lib-jsonc.
642 Configuring liblucihttp-lua.
643 Configuring luci-base.
644 Configuring luci-mod-system.
645 Configuring luci-theme-bootstrap.
646 Configuring luci-mod-status.
647 Configuring luci-app-firewall.
648 Configuring luci-proto-ppp.
649 Configuring luci-mod-network.
650 Configuring luci-mod-admin-full.
651 Configuring luci-proto-ipv6.
652 Configuring uhttpd.
653 Configuring rpcd-mod-rrdns.
654 Configuring luci.
655 root@OpenWrt:/etc# df -h
Leon Poon 2.1 656 Filesystem Size Used Available Use% Mounted on
Leon Poon 11.1 657 /dev/root 2.8M 2.8M 0 100% /rom
658 tmpfs 123.5M 764.0K 122.8M 1% /tmp
659 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
660 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
Leon Poon 6.1 661 tmpfs 512.0K 0 512.0K 0% /dev
Leon Poon 11.1 662 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
663 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
664 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
665 [ 2075.984368] device wlan0 entered promiscuous mode
666 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
667 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
668 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
669 [ 2096.494533] device wlan0 left promiscuous mode
670 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
671 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
672 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
673 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
674 [ 2097.404922] device wlan0 entered promiscuous mode
675 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
676 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
677 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
678 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
679 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
680 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
681 [ 2117.964353] device wlan0 left promiscuous mode
682 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
683 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
684 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
685 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
686 [ 2118.804171] device wlan0 entered promiscuous mode
687 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
688 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
689 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
690 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
691 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
692 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
693 [ 2245.748473] device wlan0 left promiscuous mode
694 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
695 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
696 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
697 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
698 [ 2246.557667] device wlan0 entered promiscuous mode
699 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
700 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
701 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
702 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
703 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
704 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
705
706 root@OpenWrt:/etc#
707 root@OpenWrt:/etc# uci show wireless
708 wireless.radio0=wifi-device
709 wireless.radio0.type='mac80211'
710 wireless.radio0.channel='11'
711 wireless.radio0.hwmode='11g'
712 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
713 wireless.radio0.country='00'
714 wireless.radio0.legacy_rates='1'
715 wireless.radio0.htmode='HT20'
716 wireless.default_radio0=wifi-iface
717 wireless.default_radio0.device='radio0'
718 wireless.default_radio0.network='lan'
719 wireless.default_radio0.mode='ap'
720 wireless.default_radio0.encryption='psk2'
721 wireless.default_radio0.key='qwerty1234'
722 wireless.default_radio0.ssid='asdf'
723 wireless.radio1=wifi-device
724 wireless.radio1.type='mac80211'
725 wireless.radio1.channel='36'
726 wireless.radio1.hwmode='11a'
727 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
728 wireless.radio1.htmode='VHT80'
729 wireless.radio1.__toggle='Enable'
730 wireless.radio1.country='00'
731 wireless.radio1.legacy_rates='1'
732 wireless.default_radio1=wifi-iface
733 wireless.default_radio1.device='radio1'
734 wireless.default_radio1.network='lan'
735 wireless.default_radio1.mode='ap'
736 wireless.default_radio1.ssid='asdf'
737 wireless.default_radio1.encryption='psk2'
738 wireless.default_radio1.key='qwerty1234'
739 root@OpenWrt:/etc#
Leon Poon 6.1 740 {{/code}}
Leon Poon 12.1 741
742 Firmware:
743
744 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin