Wiki source code of Openwrt for Linksys EA8100

Version 17.1 by Leon Poon on 2020/05/31 11:50
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5
6 = 19.07.x =
7
8 [[https:~~/~~/www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/>>url:https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]] ([[https:~~/~~/github.com/LeonPoon/openwrt/compare/v19.07.3...v19.07.3-linksys_ea8100>>url:https://github.com/LeonPoon/openwrt/compare/v19.07.3...v19.07.3-linksys_ea8100]])
9
10 The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partition.
11
12 How to flash:
13
14 If your router currently has stock Linksys firmware:
15
16 1. flash the "squashfs-factory.img" via Linksys UI, cross your fingers that it boots openwrt when auto rebooting. Otherwise keep rebooting until it loads openwrt. (Usually 3 times max.)
17 1. access LuCI via LAN. (It's at 192.168.1.1 so you should set connect your computer and configure your computer with an IP on same subnet eg 192.168.1.2/24). Set root password so that SSH server starts. (do not configure/restart.)
18 1. Scp the "squashfs-sysupgrade.bin" into /tmp in the router.
19 1. Log in via SSH.
20 1. Sysupgrade the squashfs-sysupgrade.bin. This should flash the openwrt firmware into both firmware partitions. It auto reboots.
21
22 If you are on my 18.x below, sysupgrade will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" and boot into it, then sysupgrade. Back up data before mtd write!
23
24 Subsequently sysupgrade from 19.07.x should work but it will **not **save config! Back up your config and other files in the router before you sysupgrade.
25
26 Wifi seem to work at 30-40MB/s with a MacBook Pro.
27
28
29 = 18.x =
30
31 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
32
33 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
34 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
35
36 Note that sysupgrade to a newer image is not likely to work.
37
38 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
39 |[[image:1567332570723-651.png]]
40
41 Dmesg:
42
43 {{code language="plain"}}
44 3: Boot system code via Flash (default).
45 4: Entr boot command line interface.
46 7: Load Boot Loader code then write to Flash via Serial.
47 9: Load Boot Loader code then write to Flash via TFTP. 4
48 You choosed 2
49 0
50
51
52 2: System Load Linux Kernel then write to Flash via TFTP.
53 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
54 Please Input new ones /or Ctrl-C to discard
55 Input device IP () ==:
56 Input server IP () ==:
57 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
58 which kernel partition to update (1/2/3=both) (2) ==:3
59
60 NetTxPacket = 0x8FFE3200
61
62 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
63
64 NetLoop,call eth_halt !
65
66 NetLoop,call eth_init !
67 Trying Eth0 (10/100-M)
68
69 Waitting for RX_DMA_BUSY status Start... done
70
71
72 ETH_STATE_ACTIVE!!
73 TFTP from server ; our IP address is
74 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
75
76 TIMEOUT_COUNT=10,Load address: 0x80100000
77 Loading: Got ARP REPLY, set server/gtwy eth addr ()
78 Got it
79 #################################################################
80 #################################################################
81 #################################################################
82 #################################################################
83 #################################################################
84 #################################################################
85 #################################################################
86 #################################################################
87 #################################################################
88 #################################################################
89 #################################################################
90 #################################################################
91 #################################################################
92 #################################################################
93 #################################################################
94 #################################################################
95 #################################################################
96 ################################################
97 done
98 Bytes transferred = 5898496 (5a0100 hex)
99 LoadAddr=80100000 NetBootFileXferSize= 005a0100
100 ranand_erase: start:180000, len:20000
101 ..ranand_erase: start:1a0000, len:20000
102 ..ranand_erase: start:1c0000, len:20000
103 ...
104 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
105 Done!
106 ranand_erase: start:2980000, len:20000
107 ..ranand_erase: start:29a0000, len:20000
108 ..ranand_erase: start:29c0000, len:20000
109 ...
110 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
111 Done!
112 ## Booting image at bc180000 ...
113 Image Name: MIPS OpenWrt Linux-4.14.141
114 Image Type: MIPS Linux Kernel Image (lzma compressed)
115 Data Size: 2010110 Bytes = 1.9 MB
116 Load Address: 80001000
117 Entry Point: 80001000
118 ............................... Verifying Checksum ... OK
119 Uncompressing Kernel Image ... OK
120 No initrd
121 ## Transferring control to Linux (at address 80001000) ...
122 ## Giving linux memsize in MB, 256
123
124 Starting kernel ...
125
126 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
127 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
128 [ 0.000000] bootconsole [early0] enabled
129 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
130 [ 0.000000] MIPS: machine is Linksys EA8100
131 [ 0.000000] Determined physical RAM map:
132 [ 0.000000] memory: 10000000 @ 00000000 (usable)
133 [ 0.000000] Initrd not found or empty - disabling initrd
134 [ 0.000000] VPE topology {2,2} total 4
135 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
136 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
137 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
138 [ 0.000000] Zone ranges:
139 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
140 [ 0.000000] HighMem empty
141 [ 0.000000] Movable zone start for each node
142 [ 0.000000] Early memory node ranges
143 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
144 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
145 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
146 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
147 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
148 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
149 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
150 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
151 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
152 [ 0.000000] Writing ErrCtl register=0002c420
153 [ 0.000000] Readback ErrCtl register=0002c420
154 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
155 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
156 [ 0.000000] Hierarchical RCU implementation.
157 [ 0.000000] NR_IRQS: 256
158 [ 0.000000] CPU Clock: 880MHz
159 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
160 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
161 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
162 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
163 [ 0.073969] pid_max: default: 32768 minimum: 301
164 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
165 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
166 [ 0.094340] Hierarchical SRCU implementation.
167 [ 0.099495] smp: Bringing up secondary CPUs ...
168 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
169 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
170 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
171 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
172 [ 0.164211] Synchronize counters for CPU 1: done.
173 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
174 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
175 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
176 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
177 [ 0.255179] Synchronize counters for CPU 2: done.
178 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
179 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
180 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
181 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
182 [ 0.340367] Synchronize counters for CPU 3: done.
183 [ 0.370232] smp: Brought up 1 node, 4 CPUs
184 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
185 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
186 [ 0.394408] pinctrl core: initialized pinctrl subsystem
187 [ 0.401009] NET: Registered protocol family 16
188 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
189 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
190 [ 0.725598] ***** Xtal 40MHz *****
191 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
192 [ 0.734049] Port 0 N_FTS = 1b102800
193 [ 0.737517] Port 1 N_FTS = 1b102800
194 [ 0.740963] Port 2 N_FTS = 1b102800
195 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
196 [ 1.900719] -> 21007f2
197 [ 1.903123] PCIE0 enabled
198 [ 1.905712] PCIE1 enabled
199 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
200 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
201 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
202 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
203 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
204 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
205 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
206 [ 1.958178] PCI host bridge to bus 0000:00
207 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
208 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
209 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
210 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
211 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
212 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
213 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
214 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
215 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
216 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
217 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
218 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
219 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
220 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
221 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
222 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
223 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
224 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
225 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
226 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
227 [ 2.100582] clocksource: Switched to clocksource GIC
228 [ 2.107275] NET: Registered protocol family 2
229 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
230 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
231 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
232 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
233 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
234 [ 2.144212] NET: Registered protocol family 1
235 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
236 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
237 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
238 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
239 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
240 [ 2.425815] random: fast init done
241 [ 2.430745] io scheduler noop registered
242 [ 2.434579] io scheduler deadline registered (default)
243 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
244 [ 2.448257] console [ttyS0] disabled
245 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
246 [ 2.460836] console [ttyS0] enabled
247 [ 2.460836] console [ttyS0] enabled
248 [ 2.467691] bootconsole [early0] disabled
249 [ 2.467691] bootconsole [early0] disabled
250 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
251 [ 2.484816] Enable NFI Clock
252 [ 2.487689] # MTK NAND # : Use HW ECC
253 [ 2.491382] Device not found, ID: c2f1
254 [ 2.495110] Not Support this Device!
255 [ 2.498835] chip_mode=00000001
256 [ 2.501893] Support this Device in MTK table! c2f1
257 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
258 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
259 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
260 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
261 [ 2.531927] Scanning device for bad blocks
262 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
263 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
264 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
265 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
266 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
267 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
268 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
269 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
270 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
271 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
272 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
273 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
274 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
275 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
276 [ 3.456742] [mtk_nand] probe successfully!
277 [ 3.461570] Signature matched and data read!
278 [ 3.465818] load_fact_bbt success 1023
279 [ 3.470276] libphy: Fixed MDIO Bus: probed
280 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
281 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
282 [ 3.556774] libphy: mdio: probed
283 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
284 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
285 [ 4.978262] NET: Registered protocol family 10
286 [ 4.984286] Segment Routing with IPv6
287 [ 4.988020] NET: Registered protocol family 17
288 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
289 [ 4.999621] UBI: auto-attach mtd9
290 [ 5.003015] ubi0: attaching mtd9
291 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
292 [ 5.039967] ubi0: scanning is finished
293 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
294 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
295 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
296 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
297 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
298 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
299 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
300 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
301 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
302 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
303 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
304 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
305 [ 5.165234] hctosys: unable to open rtc device (rtc0)
306 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
307 [ 5.195491] Freeing unused kernel memory: 1260K
308 [ 5.200022] This architecture does not have kernel memory protection.
309 [ 5.783744] init: Console is alive
310 [ 5.787378] init: - watchdog -
311 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
312 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
313 [ 6.591413] usbcore: registered new interface driver usbfs
314 [ 6.596966] usbcore: registered new interface driver hub
315 [ 6.602453] usbcore: registered new device driver usb
316 [ 6.615285] SCSI subsystem initialized
317 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
318 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
319 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
320 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
321 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
322 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
323 [ 6.676639] hub 1-0:1.0: USB hub found
324 [ 6.680467] hub 1-0:1.0: 2 ports detected
325 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
326 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
327 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
328 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
329 [ 6.713446] hub 2-0:1.0: USB hub found
330 [ 6.717275] hub 2-0:1.0: 1 port detected
331 [ 6.727313] usbcore: registered new interface driver usb-storage
332 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
333 [ 6.750877] init: - preinit -
334 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
335 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
336 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
337 [ 7.225920] scsi host0: usb-storage 2-1:1.0
338 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
339 Press the [f] key and hit [enter] to enter failsafe mode
340 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
341 [ 10.582466] UBIFS (ubi0:1): default file-system created
342 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
343 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
344 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
345 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
346 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
347 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
348 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
349 [ 10.756981] mount_root: switching to ubifs overlay
350 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
351 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
352 [ 10.876085] procd: - early -
353 [ 10.879061] procd: - watchdog -
354 [ 11.550737] procd: - watchdog -
355 [ 11.554202] procd: - ubus -
356 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
357 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
358 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
359 [ 11.625387] procd: - init -
360 Please press Enter to activate this console.
361 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
362 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
363 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
364 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
365 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
366 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
367 [ 12.127574] urngd: v1.0.0 started.
368 [ 12.145053] xt_time: kernel timezone is -0000
369 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
370 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
371 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
372 [ 12.241178]
373 [ 12.266469] random: crng init done
374 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
375 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
376 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
377 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
378 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
379 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
380 [ 20.161193]
381 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
382 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
383 [ 27.852570] PPP generic driver version 2.4.2
384 [ 27.858358] NET: Registered protocol family 24
385 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
386 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
387 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
388 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
389 [ 41.299522] device eth0.2 entered promiscuous mode
390 [ 41.304484] device eth0 entered promiscuous mode
391 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
392 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
393 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
394 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
395
396
397
398 BusyBox v1.31.0 () built-in shell (ash)
399
400 _______ ________ __
401 | |.-----.-----.-----.| | | |.----.| |_
402 | - || _ | -__| || | | || _|| _|
403 |_______|| __|_____|__|__||________||__| |____|
404 |__| W I R E L E S S F R E E D O M
405 -----------------------------------------------------
406 OpenWrt SNAPSHOT, r10942-9bebafcb5d
407 -----------------------------------------------------
408 === WARNING! =====================================
409 There is no root password defined on this device!
410 Use the "passwd" command to set up a new password
411 in order to prevent unauthorized SSH logins.
412 --------------------------------------------------
413 root@OpenWrt:/# ifconfig -a
414 br-lan Link encap:Ethernet HWaddr
415 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
416 inet6 addr: fde0:62db:5134::1/60 Scope:Global
417 inet6 addr: fe80::/64 Scope:Link
418 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
419 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
420 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
421 collisions:0 txqueuelen:1000
422 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
423
424 eth0 Link encap:Ethernet HWaddr
425 inet6 addr: fe80::/64 Scope:Link
426 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
427 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
428 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
429 collisions:0 txqueuelen:1000
430 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
431 Interrupt:21
432
433 eth0.1 Link encap:Ethernet HWaddr
434 inet6 addr: fe80::/64 Scope:Link
435 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
436 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
437 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
438 collisions:0 txqueuelen:1000
439 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
440
441 eth0.2 Link encap:Ethernet HWaddr
442 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
443 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
444 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
445 collisions:0 txqueuelen:1000
446 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
447
448 lo Link encap:Local Loopback
449 inet addr:127.0.0.1 Mask:255.0.0.0
450 inet6 addr: ::1/128 Scope:Host
451 UP LOOPBACK RUNNING MTU:65536 Metric:1
452 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
453 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
454 collisions:0 txqueuelen:1000
455 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
456
457 wlan0 Link encap:Ethernet HWaddr
458 BROADCAST MULTICAST MTU:1500 Metric:1
459 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
460 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
461 collisions:0 txqueuelen:1000
462 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
463
464 wlan1 Link encap:Ethernet HWaddr
465 BROADCAST MULTICAST MTU:1500 Metric:1
466 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
467 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
468 collisions:0 txqueuelen:1000
469 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
470
471 root@OpenWrt:/# ls -l
472 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
473 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
474 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
475 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
476 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
477 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
478 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
479 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
480 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
481 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
482 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
483 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
484 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
485 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
486 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
487 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
488 root@OpenWrt:/# ps
489 PID USER VSZ STAT COMMAND
490 1 root 1576 S /sbin/procd
491 2 root 0 SW [kthreadd]
492 3 root 0 IW [kworker/0:0]
493 4 root 0 IW< [kworker/0:0H]
494 5 root 0 IW [kworker/u8:0]
495 6 root 0 IW< [mm_percpu_wq]
496 7 root 0 SW [ksoftirqd/0]
497 8 root 0 IW [rcu_sched]
498 9 root 0 IW [rcu_bh]
499 10 root 0 SW [migration/0]
500 11 root 0 SW [cpuhp/0]
501 12 root 0 SW [cpuhp/1]
502 13 root 0 SW [migration/1]
503 14 root 0 SW [ksoftirqd/1]
504 16 root 0 IW< [kworker/1:0H]
505 17 root 0 SW [cpuhp/2]
506 18 root 0 SW [migration/2]
507 19 root 0 SW [ksoftirqd/2]
508 21 root 0 IW< [kworker/2:0H]
509 22 root 0 SW [cpuhp/3]
510 23 root 0 SW [migration/3]
511 24 root 0 SW [ksoftirqd/3]
512 25 root 0 IW [kworker/3:0]
513 26 root 0 IW< [kworker/3:0H]
514 27 root 0 IW< [netns]
515 41 root 0 IW [kworker/u8:3]
516 68 root 0 IW [kworker/3:1]
517 69 root 0 IW [kworker/2:1]
518 138 root 0 IW [kworker/1:1]
519 139 root 0 SW [oom_reaper]
520 140 root 0 IW< [writeback]
521 142 root 0 SW [kcompactd0]
522 143 root 0 IW< [crypto]
523 145 root 0 IW< [kblockd]
524 175 root 0 IW< [watchdogd]
525 199 root 0 SW [kswapd0]
526 268 root 0 IW< [pencrypt]
527 270 root 0 IW< [pdecrypt]
528 366 root 0 IW< [ipv6_addrconf]
529 378 root 0 SW [ubi_bgt0d]
530 383 root 0 IW< [kworker/0:1H]
531 384 root 0 IW< [kworker/2:1H]
532 385 root 0 IW [kworker/2:2]
533 386 root 0 IW< [kworker/3:1H]
534 389 root 0 IW< [kworker/1:1H]
535 429 root 0 IW [kworker/0:2]
536 437 root 0 IW [kworker/1:2]
537 453 root 0 SW [scsi_eh_0]
538 454 root 0 IW< [scsi_tmf_0]
539 455 root 0 SW [usb-storage]
540 496 root 0 SW [ubifs_bgt0_1]
541 573 root 1220 S /sbin/ubusd
542 574 root 1220 S /bin/ash --login
543 591 root 1028 S /sbin/urngd
544 660 root 0 IW< [cfg80211]
545 1012 root 1248 S /sbin/logd -S 64
546 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
547 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
548 1168 root 1700 S /sbin/netifd
549 1204 root 1448 S /usr/sbin/odhcpd
550 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
551 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
552 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
553 1720 root 1212 R ps
554 root@OpenWrt:/etc# ping www.google.co
555 PING www.google.co (): 56 data bytes
556 64 bytes from : seq=0 ttl=52 time=4.718 ms
557 ^C
558 --- www.google.co ping statistics ---
559 1 packets transmitted, 1 packets received, 0% packet loss
560 round-trip min/avg/max = 4.718/4.718/4.718 ms
561 root@OpenWrt:/etc# ping www.google.com
562 PING www.google.com (): 56 data bytes
563 64 bytes from : seq=0 ttl=47 time=4.927 ms
564 64 bytes from : seq=1 ttl=47 time=4.687 ms
565 ^C
566 --- www.google.com ping statistics ---
567 2 packets transmitted, 2 packets received, 0% packet loss
568 round-trip min/avg/max = 4.687/4.807/4.927 ms
569 root@OpenWrt:/etc# opkg update
570 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
571 Updated list of available packages in /var/opkg-lists/openwrt_core
572 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
573 Signature check passed.
574 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
575 Updated list of available packages in /var/opkg-lists/openwrt_base
576 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
577 Signature check passed.
578 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
579 Updated list of available packages in /var/opkg-lists/openwrt_luci
580 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
581 Signature check passed.
582 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
583 Updated list of available packages in /var/opkg-lists/openwrt_packages
584 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
585 Signature check passed.
586 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
587 Updated list of available packages in /var/opkg-lists/openwrt_routing
588 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
589 Signature check passed.
590 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
591 Updated list of available packages in /var/opkg-lists/openwrt_telephony
592 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
593 Signature check passed.
594 root@OpenWrt:/etc# opkg install luci
595 Installing luci (git-19.241.65047-dffe9ca-1) to root...
596 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
597 Installing uhttpd (2019-08-17-6b03f960-3) to root...
598 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
599 Installing liblua5.1.5 (5.1.5-5) to root...
600 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
601 Installing lua (5.1.5-5) to root...
602 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
603 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
604 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
605 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
606 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
607 Installing rpcd (2019-06-05-89bfaa42-3) to root...
608 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
609 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
610 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
611 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
612 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
613 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
614 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
615 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
616 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
617 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
618 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
619 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
620 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
621 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
622 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
623 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
624 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
625 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
626 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
627 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
628 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
629 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
630 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
631 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
632 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
633 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
634 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
635 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
636 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
637 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
638 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
639 Installing rpcd-mod-rrdns (20170710) to root...
640 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
641 Configuring liblucihttp0.
642 Configuring luci-app-opkg.
643 Configuring rpcd.
644 Configuring liblua5.1.5.
645 Configuring luci-lib-ip.
646 Configuring libubus-lua.
647 Configuring libiwinfo-lua.
648 Configuring lua.
649 Configuring luci-lib-nixio.
650 Configuring luci-lib-jsonc.
651 Configuring liblucihttp-lua.
652 Configuring luci-base.
653 Configuring luci-mod-system.
654 Configuring luci-theme-bootstrap.
655 Configuring luci-mod-status.
656 Configuring luci-app-firewall.
657 Configuring luci-proto-ppp.
658 Configuring luci-mod-network.
659 Configuring luci-mod-admin-full.
660 Configuring luci-proto-ipv6.
661 Configuring uhttpd.
662 Configuring rpcd-mod-rrdns.
663 Configuring luci.
664 root@OpenWrt:/etc# df -h
665 Filesystem Size Used Available Use% Mounted on
666 /dev/root 2.8M 2.8M 0 100% /rom
667 tmpfs 123.5M 764.0K 122.8M 1% /tmp
668 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
669 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
670 tmpfs 512.0K 0 512.0K 0% /dev
671 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
672 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
673 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
674 [ 2075.984368] device wlan0 entered promiscuous mode
675 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
676 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
677 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
678 [ 2096.494533] device wlan0 left promiscuous mode
679 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
680 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
681 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
682 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
683 [ 2097.404922] device wlan0 entered promiscuous mode
684 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
685 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
686 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
687 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
688 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
689 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
690 [ 2117.964353] device wlan0 left promiscuous mode
691 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
692 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
693 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
694 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
695 [ 2118.804171] device wlan0 entered promiscuous mode
696 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
697 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
698 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
699 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
700 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
701 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
702 [ 2245.748473] device wlan0 left promiscuous mode
703 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
704 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
705 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
706 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
707 [ 2246.557667] device wlan0 entered promiscuous mode
708 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
709 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
710 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
711 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
712 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
713 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
714
715 root@OpenWrt:/etc#
716 root@OpenWrt:/etc# uci show wireless
717 wireless.radio0=wifi-device
718 wireless.radio0.type='mac80211'
719 wireless.radio0.channel='11'
720 wireless.radio0.hwmode='11g'
721 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
722 wireless.radio0.country='00'
723 wireless.radio0.legacy_rates='1'
724 wireless.radio0.htmode='HT20'
725 wireless.default_radio0=wifi-iface
726 wireless.default_radio0.device='radio0'
727 wireless.default_radio0.network='lan'
728 wireless.default_radio0.mode='ap'
729 wireless.default_radio0.encryption='psk2'
730 wireless.default_radio0.key='qwerty1234'
731 wireless.default_radio0.ssid='asdf'
732 wireless.radio1=wifi-device
733 wireless.radio1.type='mac80211'
734 wireless.radio1.channel='36'
735 wireless.radio1.hwmode='11a'
736 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
737 wireless.radio1.htmode='VHT80'
738 wireless.radio1.__toggle='Enable'
739 wireless.radio1.country='00'
740 wireless.radio1.legacy_rates='1'
741 wireless.default_radio1=wifi-iface
742 wireless.default_radio1.device='radio1'
743 wireless.default_radio1.network='lan'
744 wireless.default_radio1.mode='ap'
745 wireless.default_radio1.ssid='asdf'
746 wireless.default_radio1.encryption='psk2'
747 wireless.default_radio1.key='qwerty1234'
748 root@OpenWrt:/etc#
749 {{/code}}
750
751 Firmware:
752
753 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin