Wiki source code of Openwrt for Linksys EA8100

Version 20.1 by Leon Poon on 2020/05/31 11:59
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5
6 = 19.07.x =
7
8 [[https:~~/~~/www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/>>url:https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]] ([[https:~~/~~/github.com/LeonPoon/openwrt/compare/v19.07.3...v19.07.3-linksys_ea8100>>url:https://github.com/LeonPoon/openwrt/compare/v19.07.3...v19.07.3-linksys_ea8100]])
9
10 The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.
11
12 How to flash:
13
14 If your router currently has stock Linksys firmware:
15
16 1. Flash the "squashfs-factory.img" via Linksys UI, Wait for it to start to reboot.
17 1. Configure your computer to have ip in 192.168.1.0/24 subnet but NOT 192.168.1.1. (so, use 192.168.1.2.) Start ping to 192.168.1.1.
18 1. Cross your fingers that the router boots openwrt. Otherwise keep rebooting until it loads the openwrt partition. (Usually 3 times max.) Wait a few minutes from reboot to let it load. If you get response from ping 192.168.1.1 it means openwrt loaded.
19 1. Access LuCI via LAN. (http:~/~/192.168.1.1). Set root password so that SSH server starts. (Do not configure/restart.) This root password is only temporary.
20 1. Scp the "squashfs-sysupgrade.bin" into /tmp in the router.
21 1. Log in as root via SSH and the password you set.
22 1. Sysupgrade the squashfs-sysupgrade.bin. This should flash the openwrt firmware into both firmware partitions. It auto reboots.
23 1. Access LuCI via 192.168.1.1 again. You can configure for real now.
24
25 If you are on my 18.x below, sysupgrade will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
26
27 Sysupgrade will wipe entire firmware partitions! Backup your files/config before sysupgrade.
28
29 Subsequently sysupgrade from 19.07.x should work.
30
31 Wifi seem to work at 30-40MB/s with a MacBook Pro.
32
33
34 = 18.x =
35
36 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
37
38 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
39 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
40
41 Note that sysupgrade to a newer image is not likely to work.
42
43 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
44 |[[image:1567332570723-651.png]]
45
46 Dmesg:
47
48 {{code language="plain"}}
49 3: Boot system code via Flash (default).
50 4: Entr boot command line interface.
51 7: Load Boot Loader code then write to Flash via Serial.
52 9: Load Boot Loader code then write to Flash via TFTP. 4
53 You choosed 2
54 0
55
56
57 2: System Load Linux Kernel then write to Flash via TFTP.
58 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
59 Please Input new ones /or Ctrl-C to discard
60 Input device IP () ==:
61 Input server IP () ==:
62 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
63 which kernel partition to update (1/2/3=both) (2) ==:3
64
65 NetTxPacket = 0x8FFE3200
66
67 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
68
69 NetLoop,call eth_halt !
70
71 NetLoop,call eth_init !
72 Trying Eth0 (10/100-M)
73
74 Waitting for RX_DMA_BUSY status Start... done
75
76
77 ETH_STATE_ACTIVE!!
78 TFTP from server ; our IP address is
79 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
80
81 TIMEOUT_COUNT=10,Load address: 0x80100000
82 Loading: Got ARP REPLY, set server/gtwy eth addr ()
83 Got it
84 #################################################################
85 #################################################################
86 #################################################################
87 #################################################################
88 #################################################################
89 #################################################################
90 #################################################################
91 #################################################################
92 #################################################################
93 #################################################################
94 #################################################################
95 #################################################################
96 #################################################################
97 #################################################################
98 #################################################################
99 #################################################################
100 #################################################################
101 ################################################
102 done
103 Bytes transferred = 5898496 (5a0100 hex)
104 LoadAddr=80100000 NetBootFileXferSize= 005a0100
105 ranand_erase: start:180000, len:20000
106 ..ranand_erase: start:1a0000, len:20000
107 ..ranand_erase: start:1c0000, len:20000
108 ...
109 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
110 Done!
111 ranand_erase: start:2980000, len:20000
112 ..ranand_erase: start:29a0000, len:20000
113 ..ranand_erase: start:29c0000, len:20000
114 ...
115 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
116 Done!
117 ## Booting image at bc180000 ...
118 Image Name: MIPS OpenWrt Linux-4.14.141
119 Image Type: MIPS Linux Kernel Image (lzma compressed)
120 Data Size: 2010110 Bytes = 1.9 MB
121 Load Address: 80001000
122 Entry Point: 80001000
123 ............................... Verifying Checksum ... OK
124 Uncompressing Kernel Image ... OK
125 No initrd
126 ## Transferring control to Linux (at address 80001000) ...
127 ## Giving linux memsize in MB, 256
128
129 Starting kernel ...
130
131 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
132 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
133 [ 0.000000] bootconsole [early0] enabled
134 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
135 [ 0.000000] MIPS: machine is Linksys EA8100
136 [ 0.000000] Determined physical RAM map:
137 [ 0.000000] memory: 10000000 @ 00000000 (usable)
138 [ 0.000000] Initrd not found or empty - disabling initrd
139 [ 0.000000] VPE topology {2,2} total 4
140 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
141 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
142 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
143 [ 0.000000] Zone ranges:
144 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
145 [ 0.000000] HighMem empty
146 [ 0.000000] Movable zone start for each node
147 [ 0.000000] Early memory node ranges
148 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
149 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
150 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
151 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
152 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
153 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
154 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
155 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
156 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
157 [ 0.000000] Writing ErrCtl register=0002c420
158 [ 0.000000] Readback ErrCtl register=0002c420
159 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
160 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
161 [ 0.000000] Hierarchical RCU implementation.
162 [ 0.000000] NR_IRQS: 256
163 [ 0.000000] CPU Clock: 880MHz
164 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
165 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
166 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
167 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
168 [ 0.073969] pid_max: default: 32768 minimum: 301
169 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
170 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
171 [ 0.094340] Hierarchical SRCU implementation.
172 [ 0.099495] smp: Bringing up secondary CPUs ...
173 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
174 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
175 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
176 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
177 [ 0.164211] Synchronize counters for CPU 1: done.
178 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
179 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
180 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
181 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
182 [ 0.255179] Synchronize counters for CPU 2: done.
183 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
184 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
185 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
186 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
187 [ 0.340367] Synchronize counters for CPU 3: done.
188 [ 0.370232] smp: Brought up 1 node, 4 CPUs
189 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
190 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
191 [ 0.394408] pinctrl core: initialized pinctrl subsystem
192 [ 0.401009] NET: Registered protocol family 16
193 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
194 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
195 [ 0.725598] ***** Xtal 40MHz *****
196 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
197 [ 0.734049] Port 0 N_FTS = 1b102800
198 [ 0.737517] Port 1 N_FTS = 1b102800
199 [ 0.740963] Port 2 N_FTS = 1b102800
200 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
201 [ 1.900719] -> 21007f2
202 [ 1.903123] PCIE0 enabled
203 [ 1.905712] PCIE1 enabled
204 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
205 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
206 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
207 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
208 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
209 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
210 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
211 [ 1.958178] PCI host bridge to bus 0000:00
212 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
213 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
214 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
215 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
216 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
217 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
218 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
219 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
220 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
221 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
222 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
223 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
224 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
225 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
226 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
227 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
228 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
229 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
230 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
231 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
232 [ 2.100582] clocksource: Switched to clocksource GIC
233 [ 2.107275] NET: Registered protocol family 2
234 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
235 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
236 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
237 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
238 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
239 [ 2.144212] NET: Registered protocol family 1
240 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
241 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
242 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
243 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
244 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
245 [ 2.425815] random: fast init done
246 [ 2.430745] io scheduler noop registered
247 [ 2.434579] io scheduler deadline registered (default)
248 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
249 [ 2.448257] console [ttyS0] disabled
250 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
251 [ 2.460836] console [ttyS0] enabled
252 [ 2.460836] console [ttyS0] enabled
253 [ 2.467691] bootconsole [early0] disabled
254 [ 2.467691] bootconsole [early0] disabled
255 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
256 [ 2.484816] Enable NFI Clock
257 [ 2.487689] # MTK NAND # : Use HW ECC
258 [ 2.491382] Device not found, ID: c2f1
259 [ 2.495110] Not Support this Device!
260 [ 2.498835] chip_mode=00000001
261 [ 2.501893] Support this Device in MTK table! c2f1
262 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
263 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
264 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
265 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
266 [ 2.531927] Scanning device for bad blocks
267 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
268 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
269 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
270 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
271 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
272 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
273 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
274 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
275 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
276 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
277 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
278 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
279 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
280 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
281 [ 3.456742] [mtk_nand] probe successfully!
282 [ 3.461570] Signature matched and data read!
283 [ 3.465818] load_fact_bbt success 1023
284 [ 3.470276] libphy: Fixed MDIO Bus: probed
285 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
286 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
287 [ 3.556774] libphy: mdio: probed
288 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
289 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
290 [ 4.978262] NET: Registered protocol family 10
291 [ 4.984286] Segment Routing with IPv6
292 [ 4.988020] NET: Registered protocol family 17
293 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
294 [ 4.999621] UBI: auto-attach mtd9
295 [ 5.003015] ubi0: attaching mtd9
296 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
297 [ 5.039967] ubi0: scanning is finished
298 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
299 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
300 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
301 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
302 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
303 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
304 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
305 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
306 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
307 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
308 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
309 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
310 [ 5.165234] hctosys: unable to open rtc device (rtc0)
311 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
312 [ 5.195491] Freeing unused kernel memory: 1260K
313 [ 5.200022] This architecture does not have kernel memory protection.
314 [ 5.783744] init: Console is alive
315 [ 5.787378] init: - watchdog -
316 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
317 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
318 [ 6.591413] usbcore: registered new interface driver usbfs
319 [ 6.596966] usbcore: registered new interface driver hub
320 [ 6.602453] usbcore: registered new device driver usb
321 [ 6.615285] SCSI subsystem initialized
322 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
323 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
324 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
325 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
326 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
327 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
328 [ 6.676639] hub 1-0:1.0: USB hub found
329 [ 6.680467] hub 1-0:1.0: 2 ports detected
330 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
331 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
332 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
333 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
334 [ 6.713446] hub 2-0:1.0: USB hub found
335 [ 6.717275] hub 2-0:1.0: 1 port detected
336 [ 6.727313] usbcore: registered new interface driver usb-storage
337 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
338 [ 6.750877] init: - preinit -
339 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
340 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
341 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
342 [ 7.225920] scsi host0: usb-storage 2-1:1.0
343 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
344 Press the [f] key and hit [enter] to enter failsafe mode
345 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
346 [ 10.582466] UBIFS (ubi0:1): default file-system created
347 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
348 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
349 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
350 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
351 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
352 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
353 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
354 [ 10.756981] mount_root: switching to ubifs overlay
355 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
356 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
357 [ 10.876085] procd: - early -
358 [ 10.879061] procd: - watchdog -
359 [ 11.550737] procd: - watchdog -
360 [ 11.554202] procd: - ubus -
361 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
362 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
363 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
364 [ 11.625387] procd: - init -
365 Please press Enter to activate this console.
366 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
367 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
368 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
369 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
370 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
371 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
372 [ 12.127574] urngd: v1.0.0 started.
373 [ 12.145053] xt_time: kernel timezone is -0000
374 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
375 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
376 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
377 [ 12.241178]
378 [ 12.266469] random: crng init done
379 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
380 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
381 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
382 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
383 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
384 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
385 [ 20.161193]
386 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
387 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
388 [ 27.852570] PPP generic driver version 2.4.2
389 [ 27.858358] NET: Registered protocol family 24
390 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
391 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
392 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
393 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
394 [ 41.299522] device eth0.2 entered promiscuous mode
395 [ 41.304484] device eth0 entered promiscuous mode
396 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
397 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
398 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
399 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
400
401
402
403 BusyBox v1.31.0 () built-in shell (ash)
404
405 _______ ________ __
406 | |.-----.-----.-----.| | | |.----.| |_
407 | - || _ | -__| || | | || _|| _|
408 |_______|| __|_____|__|__||________||__| |____|
409 |__| W I R E L E S S F R E E D O M
410 -----------------------------------------------------
411 OpenWrt SNAPSHOT, r10942-9bebafcb5d
412 -----------------------------------------------------
413 === WARNING! =====================================
414 There is no root password defined on this device!
415 Use the "passwd" command to set up a new password
416 in order to prevent unauthorized SSH logins.
417 --------------------------------------------------
418 root@OpenWrt:/# ifconfig -a
419 br-lan Link encap:Ethernet HWaddr
420 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
421 inet6 addr: fde0:62db:5134::1/60 Scope:Global
422 inet6 addr: fe80::/64 Scope:Link
423 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
424 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
425 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
426 collisions:0 txqueuelen:1000
427 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
428
429 eth0 Link encap:Ethernet HWaddr
430 inet6 addr: fe80::/64 Scope:Link
431 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
432 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
433 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
434 collisions:0 txqueuelen:1000
435 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
436 Interrupt:21
437
438 eth0.1 Link encap:Ethernet HWaddr
439 inet6 addr: fe80::/64 Scope:Link
440 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
441 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
442 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
443 collisions:0 txqueuelen:1000
444 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
445
446 eth0.2 Link encap:Ethernet HWaddr
447 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
448 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
449 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
450 collisions:0 txqueuelen:1000
451 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
452
453 lo Link encap:Local Loopback
454 inet addr:127.0.0.1 Mask:255.0.0.0
455 inet6 addr: ::1/128 Scope:Host
456 UP LOOPBACK RUNNING MTU:65536 Metric:1
457 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
458 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
459 collisions:0 txqueuelen:1000
460 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
461
462 wlan0 Link encap:Ethernet HWaddr
463 BROADCAST MULTICAST MTU:1500 Metric:1
464 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
465 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
466 collisions:0 txqueuelen:1000
467 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
468
469 wlan1 Link encap:Ethernet HWaddr
470 BROADCAST MULTICAST MTU:1500 Metric:1
471 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
472 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
473 collisions:0 txqueuelen:1000
474 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
475
476 root@OpenWrt:/# ls -l
477 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
478 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
479 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
480 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
481 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
482 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
483 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
484 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
485 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
486 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
487 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
488 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
489 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
490 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
491 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
492 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
493 root@OpenWrt:/# ps
494 PID USER VSZ STAT COMMAND
495 1 root 1576 S /sbin/procd
496 2 root 0 SW [kthreadd]
497 3 root 0 IW [kworker/0:0]
498 4 root 0 IW< [kworker/0:0H]
499 5 root 0 IW [kworker/u8:0]
500 6 root 0 IW< [mm_percpu_wq]
501 7 root 0 SW [ksoftirqd/0]
502 8 root 0 IW [rcu_sched]
503 9 root 0 IW [rcu_bh]
504 10 root 0 SW [migration/0]
505 11 root 0 SW [cpuhp/0]
506 12 root 0 SW [cpuhp/1]
507 13 root 0 SW [migration/1]
508 14 root 0 SW [ksoftirqd/1]
509 16 root 0 IW< [kworker/1:0H]
510 17 root 0 SW [cpuhp/2]
511 18 root 0 SW [migration/2]
512 19 root 0 SW [ksoftirqd/2]
513 21 root 0 IW< [kworker/2:0H]
514 22 root 0 SW [cpuhp/3]
515 23 root 0 SW [migration/3]
516 24 root 0 SW [ksoftirqd/3]
517 25 root 0 IW [kworker/3:0]
518 26 root 0 IW< [kworker/3:0H]
519 27 root 0 IW< [netns]
520 41 root 0 IW [kworker/u8:3]
521 68 root 0 IW [kworker/3:1]
522 69 root 0 IW [kworker/2:1]
523 138 root 0 IW [kworker/1:1]
524 139 root 0 SW [oom_reaper]
525 140 root 0 IW< [writeback]
526 142 root 0 SW [kcompactd0]
527 143 root 0 IW< [crypto]
528 145 root 0 IW< [kblockd]
529 175 root 0 IW< [watchdogd]
530 199 root 0 SW [kswapd0]
531 268 root 0 IW< [pencrypt]
532 270 root 0 IW< [pdecrypt]
533 366 root 0 IW< [ipv6_addrconf]
534 378 root 0 SW [ubi_bgt0d]
535 383 root 0 IW< [kworker/0:1H]
536 384 root 0 IW< [kworker/2:1H]
537 385 root 0 IW [kworker/2:2]
538 386 root 0 IW< [kworker/3:1H]
539 389 root 0 IW< [kworker/1:1H]
540 429 root 0 IW [kworker/0:2]
541 437 root 0 IW [kworker/1:2]
542 453 root 0 SW [scsi_eh_0]
543 454 root 0 IW< [scsi_tmf_0]
544 455 root 0 SW [usb-storage]
545 496 root 0 SW [ubifs_bgt0_1]
546 573 root 1220 S /sbin/ubusd
547 574 root 1220 S /bin/ash --login
548 591 root 1028 S /sbin/urngd
549 660 root 0 IW< [cfg80211]
550 1012 root 1248 S /sbin/logd -S 64
551 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
552 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
553 1168 root 1700 S /sbin/netifd
554 1204 root 1448 S /usr/sbin/odhcpd
555 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
556 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
557 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
558 1720 root 1212 R ps
559 root@OpenWrt:/etc# ping www.google.co
560 PING www.google.co (): 56 data bytes
561 64 bytes from : seq=0 ttl=52 time=4.718 ms
562 ^C
563 --- www.google.co ping statistics ---
564 1 packets transmitted, 1 packets received, 0% packet loss
565 round-trip min/avg/max = 4.718/4.718/4.718 ms
566 root@OpenWrt:/etc# ping www.google.com
567 PING www.google.com (): 56 data bytes
568 64 bytes from : seq=0 ttl=47 time=4.927 ms
569 64 bytes from : seq=1 ttl=47 time=4.687 ms
570 ^C
571 --- www.google.com ping statistics ---
572 2 packets transmitted, 2 packets received, 0% packet loss
573 round-trip min/avg/max = 4.687/4.807/4.927 ms
574 root@OpenWrt:/etc# opkg update
575 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
576 Updated list of available packages in /var/opkg-lists/openwrt_core
577 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
578 Signature check passed.
579 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
580 Updated list of available packages in /var/opkg-lists/openwrt_base
581 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
582 Signature check passed.
583 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
584 Updated list of available packages in /var/opkg-lists/openwrt_luci
585 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
586 Signature check passed.
587 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
588 Updated list of available packages in /var/opkg-lists/openwrt_packages
589 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
590 Signature check passed.
591 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
592 Updated list of available packages in /var/opkg-lists/openwrt_routing
593 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
594 Signature check passed.
595 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
596 Updated list of available packages in /var/opkg-lists/openwrt_telephony
597 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
598 Signature check passed.
599 root@OpenWrt:/etc# opkg install luci
600 Installing luci (git-19.241.65047-dffe9ca-1) to root...
601 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
602 Installing uhttpd (2019-08-17-6b03f960-3) to root...
603 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
604 Installing liblua5.1.5 (5.1.5-5) to root...
605 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
606 Installing lua (5.1.5-5) to root...
607 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
608 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
609 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
610 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
611 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
612 Installing rpcd (2019-06-05-89bfaa42-3) to root...
613 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
614 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
615 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
616 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
617 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
618 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
619 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
620 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
621 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
622 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
623 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
624 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
625 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
626 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
627 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
628 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
629 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
630 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
631 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
632 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
633 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
634 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
635 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
636 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
637 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
638 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
639 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
640 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
641 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
642 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
643 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
644 Installing rpcd-mod-rrdns (20170710) to root...
645 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
646 Configuring liblucihttp0.
647 Configuring luci-app-opkg.
648 Configuring rpcd.
649 Configuring liblua5.1.5.
650 Configuring luci-lib-ip.
651 Configuring libubus-lua.
652 Configuring libiwinfo-lua.
653 Configuring lua.
654 Configuring luci-lib-nixio.
655 Configuring luci-lib-jsonc.
656 Configuring liblucihttp-lua.
657 Configuring luci-base.
658 Configuring luci-mod-system.
659 Configuring luci-theme-bootstrap.
660 Configuring luci-mod-status.
661 Configuring luci-app-firewall.
662 Configuring luci-proto-ppp.
663 Configuring luci-mod-network.
664 Configuring luci-mod-admin-full.
665 Configuring luci-proto-ipv6.
666 Configuring uhttpd.
667 Configuring rpcd-mod-rrdns.
668 Configuring luci.
669 root@OpenWrt:/etc# df -h
670 Filesystem Size Used Available Use% Mounted on
671 /dev/root 2.8M 2.8M 0 100% /rom
672 tmpfs 123.5M 764.0K 122.8M 1% /tmp
673 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
674 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
675 tmpfs 512.0K 0 512.0K 0% /dev
676 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
677 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
678 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
679 [ 2075.984368] device wlan0 entered promiscuous mode
680 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
681 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
682 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
683 [ 2096.494533] device wlan0 left promiscuous mode
684 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
685 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
686 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
687 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
688 [ 2097.404922] device wlan0 entered promiscuous mode
689 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
690 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
691 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
692 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
693 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
694 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
695 [ 2117.964353] device wlan0 left promiscuous mode
696 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
697 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
698 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
699 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
700 [ 2118.804171] device wlan0 entered promiscuous mode
701 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
702 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
703 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
704 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
705 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
706 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
707 [ 2245.748473] device wlan0 left promiscuous mode
708 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
709 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
710 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
711 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
712 [ 2246.557667] device wlan0 entered promiscuous mode
713 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
714 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
715 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
716 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
717 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
718 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
719
720 root@OpenWrt:/etc#
721 root@OpenWrt:/etc# uci show wireless
722 wireless.radio0=wifi-device
723 wireless.radio0.type='mac80211'
724 wireless.radio0.channel='11'
725 wireless.radio0.hwmode='11g'
726 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
727 wireless.radio0.country='00'
728 wireless.radio0.legacy_rates='1'
729 wireless.radio0.htmode='HT20'
730 wireless.default_radio0=wifi-iface
731 wireless.default_radio0.device='radio0'
732 wireless.default_radio0.network='lan'
733 wireless.default_radio0.mode='ap'
734 wireless.default_radio0.encryption='psk2'
735 wireless.default_radio0.key='qwerty1234'
736 wireless.default_radio0.ssid='asdf'
737 wireless.radio1=wifi-device
738 wireless.radio1.type='mac80211'
739 wireless.radio1.channel='36'
740 wireless.radio1.hwmode='11a'
741 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
742 wireless.radio1.htmode='VHT80'
743 wireless.radio1.__toggle='Enable'
744 wireless.radio1.country='00'
745 wireless.radio1.legacy_rates='1'
746 wireless.default_radio1=wifi-iface
747 wireless.default_radio1.device='radio1'
748 wireless.default_radio1.network='lan'
749 wireless.default_radio1.mode='ap'
750 wireless.default_radio1.ssid='asdf'
751 wireless.default_radio1.encryption='psk2'
752 wireless.default_radio1.key='qwerty1234'
753 root@OpenWrt:/etc#
754 {{/code}}
755
756 Firmware:
757
758 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin