Wiki source code of Openwrt for Linksys EA8100

Version 26.1 by Leon Poon on 2020/06/03 10:27
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5
6 = 19.07.x =
7
8 [[https:~~/~~/www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/>>url:https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]] ([[https:~~/~~/github.com/LeonPoon/openwrt/compare/v19.07.3...v19.07.3-linksys_ea8100>>url:https://github.com/LeonPoon/openwrt/compare/v19.07.3...v19.07.3-linksys_ea8100]])
9
10 The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.
11
12 How to flash:
13
14 If your router currently has stock Linksys firmware:
15
16 1. Flash the "initramfs-factory.img" via Linksys UI. Wait for it to start to reboot.
17 1. Configure your computer to have ip in 192.168.1.0/24 subnet but NOT 192.168.1.1. (so, use 192.168.1.2.) Start ping to 192.168.1.1.
18 1. Cross your fingers that the router boots openwrt. Otherwise keep rebooting until it loads the openwrt partition. (Usually 3 times max.) Wait a few minutes from reboot to let it load. If you get ping response from 192.168.1.1 it means openwrt loaded.
19 1. Scp the "squashfs-sysupgrade.bin" into /tmp in the router. root@192.168.1.1. No password.
20 1. Log in as root via SSH into shell. No password.
21 1. Sysupgrade the uploaded squashfs-sysupgrade.bin. This should flash the openwrt firmware into both firmware partitions. It auto reboots.
22 1. opkg update
23 1. opkg install luci
24 1. Access LuCI via http:~/~/192.168.1.1/. You can now configure.
25
26 If you are on my 18.x below, sysupgrade will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
27
28 Sysupgrade will wipe entire firmware partitions! Backup your files/config before sysupgrade.
29
30 Subsequently sysupgrade from 19.07.x should work.
31
32 Wifi seem to work at 30-40MB/s with a MacBook Pro.
33
34
35 = 18.x =
36
37 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
38
39 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
40 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
41
42 Note that sysupgrade to a newer image is not likely to work.
43
44 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
45 |[[image:1567332570723-651.png]]
46
47 Dmesg:
48
49 {{code language="plain"}}
50 3: Boot system code via Flash (default).
51 4: Entr boot command line interface.
52 7: Load Boot Loader code then write to Flash via Serial.
53 9: Load Boot Loader code then write to Flash via TFTP. 4
54 You choosed 2
55 0
56
57
58 2: System Load Linux Kernel then write to Flash via TFTP.
59 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
60 Please Input new ones /or Ctrl-C to discard
61 Input device IP () ==:
62 Input server IP () ==:
63 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
64 which kernel partition to update (1/2/3=both) (2) ==:3
65
66 NetTxPacket = 0x8FFE3200
67
68 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
69
70 NetLoop,call eth_halt !
71
72 NetLoop,call eth_init !
73 Trying Eth0 (10/100-M)
74
75 Waitting for RX_DMA_BUSY status Start... done
76
77
78 ETH_STATE_ACTIVE!!
79 TFTP from server ; our IP address is
80 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
81
82 TIMEOUT_COUNT=10,Load address: 0x80100000
83 Loading: Got ARP REPLY, set server/gtwy eth addr ()
84 Got it
85 #################################################################
86 #################################################################
87 #################################################################
88 #################################################################
89 #################################################################
90 #################################################################
91 #################################################################
92 #################################################################
93 #################################################################
94 #################################################################
95 #################################################################
96 #################################################################
97 #################################################################
98 #################################################################
99 #################################################################
100 #################################################################
101 #################################################################
102 ################################################
103 done
104 Bytes transferred = 5898496 (5a0100 hex)
105 LoadAddr=80100000 NetBootFileXferSize= 005a0100
106 ranand_erase: start:180000, len:20000
107 ..ranand_erase: start:1a0000, len:20000
108 ..ranand_erase: start:1c0000, len:20000
109 ...
110 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
111 Done!
112 ranand_erase: start:2980000, len:20000
113 ..ranand_erase: start:29a0000, len:20000
114 ..ranand_erase: start:29c0000, len:20000
115 ...
116 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
117 Done!
118 ## Booting image at bc180000 ...
119 Image Name: MIPS OpenWrt Linux-4.14.141
120 Image Type: MIPS Linux Kernel Image (lzma compressed)
121 Data Size: 2010110 Bytes = 1.9 MB
122 Load Address: 80001000
123 Entry Point: 80001000
124 ............................... Verifying Checksum ... OK
125 Uncompressing Kernel Image ... OK
126 No initrd
127 ## Transferring control to Linux (at address 80001000) ...
128 ## Giving linux memsize in MB, 256
129
130 Starting kernel ...
131
132 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
133 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
134 [ 0.000000] bootconsole [early0] enabled
135 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
136 [ 0.000000] MIPS: machine is Linksys EA8100
137 [ 0.000000] Determined physical RAM map:
138 [ 0.000000] memory: 10000000 @ 00000000 (usable)
139 [ 0.000000] Initrd not found or empty - disabling initrd
140 [ 0.000000] VPE topology {2,2} total 4
141 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
142 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
143 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
144 [ 0.000000] Zone ranges:
145 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
146 [ 0.000000] HighMem empty
147 [ 0.000000] Movable zone start for each node
148 [ 0.000000] Early memory node ranges
149 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
150 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
151 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
152 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
153 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
154 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
155 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
156 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
157 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
158 [ 0.000000] Writing ErrCtl register=0002c420
159 [ 0.000000] Readback ErrCtl register=0002c420
160 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
161 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
162 [ 0.000000] Hierarchical RCU implementation.
163 [ 0.000000] NR_IRQS: 256
164 [ 0.000000] CPU Clock: 880MHz
165 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
166 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
167 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
168 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
169 [ 0.073969] pid_max: default: 32768 minimum: 301
170 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
171 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
172 [ 0.094340] Hierarchical SRCU implementation.
173 [ 0.099495] smp: Bringing up secondary CPUs ...
174 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
175 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
176 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
177 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
178 [ 0.164211] Synchronize counters for CPU 1: done.
179 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
180 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
181 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
182 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
183 [ 0.255179] Synchronize counters for CPU 2: done.
184 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
185 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
186 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
187 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
188 [ 0.340367] Synchronize counters for CPU 3: done.
189 [ 0.370232] smp: Brought up 1 node, 4 CPUs
190 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
191 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
192 [ 0.394408] pinctrl core: initialized pinctrl subsystem
193 [ 0.401009] NET: Registered protocol family 16
194 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
195 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
196 [ 0.725598] ***** Xtal 40MHz *****
197 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
198 [ 0.734049] Port 0 N_FTS = 1b102800
199 [ 0.737517] Port 1 N_FTS = 1b102800
200 [ 0.740963] Port 2 N_FTS = 1b102800
201 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
202 [ 1.900719] -> 21007f2
203 [ 1.903123] PCIE0 enabled
204 [ 1.905712] PCIE1 enabled
205 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
206 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
207 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
208 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
209 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
210 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
211 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
212 [ 1.958178] PCI host bridge to bus 0000:00
213 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
214 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
215 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
216 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
217 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
218 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
219 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
220 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
221 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
222 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
223 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
224 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
225 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
226 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
227 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
228 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
229 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
230 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
231 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
232 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
233 [ 2.100582] clocksource: Switched to clocksource GIC
234 [ 2.107275] NET: Registered protocol family 2
235 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
236 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
237 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
238 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
239 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
240 [ 2.144212] NET: Registered protocol family 1
241 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
242 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
243 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
244 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
245 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
246 [ 2.425815] random: fast init done
247 [ 2.430745] io scheduler noop registered
248 [ 2.434579] io scheduler deadline registered (default)
249 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
250 [ 2.448257] console [ttyS0] disabled
251 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
252 [ 2.460836] console [ttyS0] enabled
253 [ 2.460836] console [ttyS0] enabled
254 [ 2.467691] bootconsole [early0] disabled
255 [ 2.467691] bootconsole [early0] disabled
256 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
257 [ 2.484816] Enable NFI Clock
258 [ 2.487689] # MTK NAND # : Use HW ECC
259 [ 2.491382] Device not found, ID: c2f1
260 [ 2.495110] Not Support this Device!
261 [ 2.498835] chip_mode=00000001
262 [ 2.501893] Support this Device in MTK table! c2f1
263 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
264 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
265 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
266 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
267 [ 2.531927] Scanning device for bad blocks
268 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
269 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
270 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
271 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
272 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
273 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
274 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
275 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
276 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
277 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
278 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
279 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
280 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
281 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
282 [ 3.456742] [mtk_nand] probe successfully!
283 [ 3.461570] Signature matched and data read!
284 [ 3.465818] load_fact_bbt success 1023
285 [ 3.470276] libphy: Fixed MDIO Bus: probed
286 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
287 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
288 [ 3.556774] libphy: mdio: probed
289 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
290 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
291 [ 4.978262] NET: Registered protocol family 10
292 [ 4.984286] Segment Routing with IPv6
293 [ 4.988020] NET: Registered protocol family 17
294 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
295 [ 4.999621] UBI: auto-attach mtd9
296 [ 5.003015] ubi0: attaching mtd9
297 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
298 [ 5.039967] ubi0: scanning is finished
299 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
300 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
301 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
302 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
303 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
304 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
305 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
306 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
307 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
308 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
309 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
310 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
311 [ 5.165234] hctosys: unable to open rtc device (rtc0)
312 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
313 [ 5.195491] Freeing unused kernel memory: 1260K
314 [ 5.200022] This architecture does not have kernel memory protection.
315 [ 5.783744] init: Console is alive
316 [ 5.787378] init: - watchdog -
317 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
318 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
319 [ 6.591413] usbcore: registered new interface driver usbfs
320 [ 6.596966] usbcore: registered new interface driver hub
321 [ 6.602453] usbcore: registered new device driver usb
322 [ 6.615285] SCSI subsystem initialized
323 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
324 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
325 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
326 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
327 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
328 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
329 [ 6.676639] hub 1-0:1.0: USB hub found
330 [ 6.680467] hub 1-0:1.0: 2 ports detected
331 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
332 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
333 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
334 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
335 [ 6.713446] hub 2-0:1.0: USB hub found
336 [ 6.717275] hub 2-0:1.0: 1 port detected
337 [ 6.727313] usbcore: registered new interface driver usb-storage
338 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
339 [ 6.750877] init: - preinit -
340 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
341 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
342 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
343 [ 7.225920] scsi host0: usb-storage 2-1:1.0
344 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
345 Press the [f] key and hit [enter] to enter failsafe mode
346 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
347 [ 10.582466] UBIFS (ubi0:1): default file-system created
348 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
349 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
350 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
351 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
352 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
353 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
354 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
355 [ 10.756981] mount_root: switching to ubifs overlay
356 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
357 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
358 [ 10.876085] procd: - early -
359 [ 10.879061] procd: - watchdog -
360 [ 11.550737] procd: - watchdog -
361 [ 11.554202] procd: - ubus -
362 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
363 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
364 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
365 [ 11.625387] procd: - init -
366 Please press Enter to activate this console.
367 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
368 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
369 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
370 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
371 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
372 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
373 [ 12.127574] urngd: v1.0.0 started.
374 [ 12.145053] xt_time: kernel timezone is -0000
375 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
376 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
377 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
378 [ 12.241178]
379 [ 12.266469] random: crng init done
380 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
381 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
382 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
383 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
384 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
385 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
386 [ 20.161193]
387 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
388 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
389 [ 27.852570] PPP generic driver version 2.4.2
390 [ 27.858358] NET: Registered protocol family 24
391 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
392 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
393 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
394 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
395 [ 41.299522] device eth0.2 entered promiscuous mode
396 [ 41.304484] device eth0 entered promiscuous mode
397 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
398 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
399 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
400 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
401
402
403
404 BusyBox v1.31.0 () built-in shell (ash)
405
406 _______ ________ __
407 | |.-----.-----.-----.| | | |.----.| |_
408 | - || _ | -__| || | | || _|| _|
409 |_______|| __|_____|__|__||________||__| |____|
410 |__| W I R E L E S S F R E E D O M
411 -----------------------------------------------------
412 OpenWrt SNAPSHOT, r10942-9bebafcb5d
413 -----------------------------------------------------
414 === WARNING! =====================================
415 There is no root password defined on this device!
416 Use the "passwd" command to set up a new password
417 in order to prevent unauthorized SSH logins.
418 --------------------------------------------------
419 root@OpenWrt:/# ifconfig -a
420 br-lan Link encap:Ethernet HWaddr
421 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
422 inet6 addr: fde0:62db:5134::1/60 Scope:Global
423 inet6 addr: fe80::/64 Scope:Link
424 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
425 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
426 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
427 collisions:0 txqueuelen:1000
428 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
429
430 eth0 Link encap:Ethernet HWaddr
431 inet6 addr: fe80::/64 Scope:Link
432 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
433 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
434 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
435 collisions:0 txqueuelen:1000
436 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
437 Interrupt:21
438
439 eth0.1 Link encap:Ethernet HWaddr
440 inet6 addr: fe80::/64 Scope:Link
441 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
442 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
443 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
444 collisions:0 txqueuelen:1000
445 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
446
447 eth0.2 Link encap:Ethernet HWaddr
448 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
449 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
450 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
451 collisions:0 txqueuelen:1000
452 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
453
454 lo Link encap:Local Loopback
455 inet addr:127.0.0.1 Mask:255.0.0.0
456 inet6 addr: ::1/128 Scope:Host
457 UP LOOPBACK RUNNING MTU:65536 Metric:1
458 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
459 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
460 collisions:0 txqueuelen:1000
461 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
462
463 wlan0 Link encap:Ethernet HWaddr
464 BROADCAST MULTICAST MTU:1500 Metric:1
465 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
466 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
467 collisions:0 txqueuelen:1000
468 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
469
470 wlan1 Link encap:Ethernet HWaddr
471 BROADCAST MULTICAST MTU:1500 Metric:1
472 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
473 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
474 collisions:0 txqueuelen:1000
475 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
476
477 root@OpenWrt:/# ls -l
478 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
479 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
480 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
481 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
482 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
483 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
484 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
485 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
486 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
487 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
488 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
489 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
490 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
491 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
492 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
493 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
494 root@OpenWrt:/# ps
495 PID USER VSZ STAT COMMAND
496 1 root 1576 S /sbin/procd
497 2 root 0 SW [kthreadd]
498 3 root 0 IW [kworker/0:0]
499 4 root 0 IW< [kworker/0:0H]
500 5 root 0 IW [kworker/u8:0]
501 6 root 0 IW< [mm_percpu_wq]
502 7 root 0 SW [ksoftirqd/0]
503 8 root 0 IW [rcu_sched]
504 9 root 0 IW [rcu_bh]
505 10 root 0 SW [migration/0]
506 11 root 0 SW [cpuhp/0]
507 12 root 0 SW [cpuhp/1]
508 13 root 0 SW [migration/1]
509 14 root 0 SW [ksoftirqd/1]
510 16 root 0 IW< [kworker/1:0H]
511 17 root 0 SW [cpuhp/2]
512 18 root 0 SW [migration/2]
513 19 root 0 SW [ksoftirqd/2]
514 21 root 0 IW< [kworker/2:0H]
515 22 root 0 SW [cpuhp/3]
516 23 root 0 SW [migration/3]
517 24 root 0 SW [ksoftirqd/3]
518 25 root 0 IW [kworker/3:0]
519 26 root 0 IW< [kworker/3:0H]
520 27 root 0 IW< [netns]
521 41 root 0 IW [kworker/u8:3]
522 68 root 0 IW [kworker/3:1]
523 69 root 0 IW [kworker/2:1]
524 138 root 0 IW [kworker/1:1]
525 139 root 0 SW [oom_reaper]
526 140 root 0 IW< [writeback]
527 142 root 0 SW [kcompactd0]
528 143 root 0 IW< [crypto]
529 145 root 0 IW< [kblockd]
530 175 root 0 IW< [watchdogd]
531 199 root 0 SW [kswapd0]
532 268 root 0 IW< [pencrypt]
533 270 root 0 IW< [pdecrypt]
534 366 root 0 IW< [ipv6_addrconf]
535 378 root 0 SW [ubi_bgt0d]
536 383 root 0 IW< [kworker/0:1H]
537 384 root 0 IW< [kworker/2:1H]
538 385 root 0 IW [kworker/2:2]
539 386 root 0 IW< [kworker/3:1H]
540 389 root 0 IW< [kworker/1:1H]
541 429 root 0 IW [kworker/0:2]
542 437 root 0 IW [kworker/1:2]
543 453 root 0 SW [scsi_eh_0]
544 454 root 0 IW< [scsi_tmf_0]
545 455 root 0 SW [usb-storage]
546 496 root 0 SW [ubifs_bgt0_1]
547 573 root 1220 S /sbin/ubusd
548 574 root 1220 S /bin/ash --login
549 591 root 1028 S /sbin/urngd
550 660 root 0 IW< [cfg80211]
551 1012 root 1248 S /sbin/logd -S 64
552 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
553 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
554 1168 root 1700 S /sbin/netifd
555 1204 root 1448 S /usr/sbin/odhcpd
556 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
557 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
558 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
559 1720 root 1212 R ps
560 root@OpenWrt:/etc# ping www.google.co
561 PING www.google.co (): 56 data bytes
562 64 bytes from : seq=0 ttl=52 time=4.718 ms
563 ^C
564 --- www.google.co ping statistics ---
565 1 packets transmitted, 1 packets received, 0% packet loss
566 round-trip min/avg/max = 4.718/4.718/4.718 ms
567 root@OpenWrt:/etc# ping www.google.com
568 PING www.google.com (): 56 data bytes
569 64 bytes from : seq=0 ttl=47 time=4.927 ms
570 64 bytes from : seq=1 ttl=47 time=4.687 ms
571 ^C
572 --- www.google.com ping statistics ---
573 2 packets transmitted, 2 packets received, 0% packet loss
574 round-trip min/avg/max = 4.687/4.807/4.927 ms
575 root@OpenWrt:/etc# opkg update
576 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
577 Updated list of available packages in /var/opkg-lists/openwrt_core
578 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
579 Signature check passed.
580 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
581 Updated list of available packages in /var/opkg-lists/openwrt_base
582 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
583 Signature check passed.
584 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
585 Updated list of available packages in /var/opkg-lists/openwrt_luci
586 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
587 Signature check passed.
588 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
589 Updated list of available packages in /var/opkg-lists/openwrt_packages
590 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
591 Signature check passed.
592 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
593 Updated list of available packages in /var/opkg-lists/openwrt_routing
594 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
595 Signature check passed.
596 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
597 Updated list of available packages in /var/opkg-lists/openwrt_telephony
598 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
599 Signature check passed.
600 root@OpenWrt:/etc# opkg install luci
601 Installing luci (git-19.241.65047-dffe9ca-1) to root...
602 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
603 Installing uhttpd (2019-08-17-6b03f960-3) to root...
604 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
605 Installing liblua5.1.5 (5.1.5-5) to root...
606 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
607 Installing lua (5.1.5-5) to root...
608 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
609 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
610 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
611 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
612 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
613 Installing rpcd (2019-06-05-89bfaa42-3) to root...
614 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
615 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
616 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
617 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
618 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
619 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
620 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
621 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
622 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
623 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
624 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
625 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
626 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
627 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
628 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
629 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
630 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
631 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
632 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
633 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
634 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
635 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
636 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
637 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
638 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
639 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
640 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
641 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
642 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
643 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
644 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
645 Installing rpcd-mod-rrdns (20170710) to root...
646 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
647 Configuring liblucihttp0.
648 Configuring luci-app-opkg.
649 Configuring rpcd.
650 Configuring liblua5.1.5.
651 Configuring luci-lib-ip.
652 Configuring libubus-lua.
653 Configuring libiwinfo-lua.
654 Configuring lua.
655 Configuring luci-lib-nixio.
656 Configuring luci-lib-jsonc.
657 Configuring liblucihttp-lua.
658 Configuring luci-base.
659 Configuring luci-mod-system.
660 Configuring luci-theme-bootstrap.
661 Configuring luci-mod-status.
662 Configuring luci-app-firewall.
663 Configuring luci-proto-ppp.
664 Configuring luci-mod-network.
665 Configuring luci-mod-admin-full.
666 Configuring luci-proto-ipv6.
667 Configuring uhttpd.
668 Configuring rpcd-mod-rrdns.
669 Configuring luci.
670 root@OpenWrt:/etc# df -h
671 Filesystem Size Used Available Use% Mounted on
672 /dev/root 2.8M 2.8M 0 100% /rom
673 tmpfs 123.5M 764.0K 122.8M 1% /tmp
674 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
675 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
676 tmpfs 512.0K 0 512.0K 0% /dev
677 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
678 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
679 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
680 [ 2075.984368] device wlan0 entered promiscuous mode
681 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
682 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
683 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
684 [ 2096.494533] device wlan0 left promiscuous mode
685 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
686 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
687 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
688 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
689 [ 2097.404922] device wlan0 entered promiscuous mode
690 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
691 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
692 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
693 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
694 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
695 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
696 [ 2117.964353] device wlan0 left promiscuous mode
697 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
698 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
699 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
700 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
701 [ 2118.804171] device wlan0 entered promiscuous mode
702 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
703 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
704 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
705 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
706 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
707 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
708 [ 2245.748473] device wlan0 left promiscuous mode
709 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
710 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
711 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
712 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
713 [ 2246.557667] device wlan0 entered promiscuous mode
714 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
715 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
716 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
717 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
718 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
719 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
720
721 root@OpenWrt:/etc#
722 root@OpenWrt:/etc# uci show wireless
723 wireless.radio0=wifi-device
724 wireless.radio0.type='mac80211'
725 wireless.radio0.channel='11'
726 wireless.radio0.hwmode='11g'
727 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
728 wireless.radio0.country='00'
729 wireless.radio0.legacy_rates='1'
730 wireless.radio0.htmode='HT20'
731 wireless.default_radio0=wifi-iface
732 wireless.default_radio0.device='radio0'
733 wireless.default_radio0.network='lan'
734 wireless.default_radio0.mode='ap'
735 wireless.default_radio0.encryption='psk2'
736 wireless.default_radio0.key='qwerty1234'
737 wireless.default_radio0.ssid='asdf'
738 wireless.radio1=wifi-device
739 wireless.radio1.type='mac80211'
740 wireless.radio1.channel='36'
741 wireless.radio1.hwmode='11a'
742 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
743 wireless.radio1.htmode='VHT80'
744 wireless.radio1.__toggle='Enable'
745 wireless.radio1.country='00'
746 wireless.radio1.legacy_rates='1'
747 wireless.default_radio1=wifi-iface
748 wireless.default_radio1.device='radio1'
749 wireless.default_radio1.network='lan'
750 wireless.default_radio1.mode='ap'
751 wireless.default_radio1.ssid='asdf'
752 wireless.default_radio1.encryption='psk2'
753 wireless.default_radio1.key='qwerty1234'
754 root@OpenWrt:/etc#
755 {{/code}}
756
757 Firmware:
758
759 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin