Wiki source code of Openwrt for Linksys EA8100

Version 28.1 by Leon Poon on 2020/09/10 13:52
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5
6 = 19.07.x =
7
8 19.07.4 is here!
9
10 [[https:~~/~~/www.codepowered.com/openwrt/v19.07.4/linksys_ea8100/>>https://www.codepowered.com/openwrt/v19.07.4/linksys_ea8100/]] ([[https:~~/~~/github.com/LeonPoon/openwrt/compare/v19.07.4...v19.07.4-linksys_ea8100>>https://github.com/LeonPoon/openwrt/compare/v19.07.4...v19.07.4-linksys_ea8100]])
11
12 The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.
13
14 How to flash:
15
16 If your router currently has stock Linksys firmware:
17
18 1. Flash the "initramfs-factory.img" via Linksys UI. Wait for it to start to reboot.
19 1. Configure your computer to have ip in 192.168.1.0/24 subnet but NOT 192.168.1.1. (so, use 192.168.1.2.) Start ping to 192.168.1.1.
20 1. Cross your fingers that the router boots openwrt. Otherwise keep rebooting until it loads the openwrt partition. (Usually 3 times max.) Wait a few minutes from reboot to let it load. If you get ping response from 192.168.1.1 it means openwrt loaded.
21 1. Scp the "squashfs-sysupgrade.bin" into /tmp in the router. root@192.168.1.1. No password.
22 1. Log in as root via SSH into shell. No password.
23 1. Sysupgrade the uploaded squashfs-sysupgrade.bin. This should flash the openwrt firmware into both firmware partitions. It auto reboots.
24 1. opkg update
25 1. **opkg install luci (the flashed images does not contain Luci)**
26 1. Access LuCI via http:~/~/192.168.1.1/. You can now configure.
27
28 If you are on my 18.x below, sysupgrade will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
29
30 Sysupgrade will wipe entire firmware partitions! Backup your files/config before sysupgrade.
31
32 Subsequently sysupgrade from 19.07.x should work.
33
34 Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
35
36 **Known issue**: 2.4Ghz wifi performance is really bad. 5Ghz seem ok though.
37
38
39 = 18.x =
40
41 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
42
43 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
44 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
45
46 Note that sysupgrade to a newer image is not likely to work.
47
48 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
49 |[[image:1567332570723-651.png]]
50
51 Dmesg:
52
53 {{code language="plain"}}
54 3: Boot system code via Flash (default).
55 4: Entr boot command line interface.
56 7: Load Boot Loader code then write to Flash via Serial.
57 9: Load Boot Loader code then write to Flash via TFTP. 4
58 You choosed 2
59 0
60
61
62 2: System Load Linux Kernel then write to Flash via TFTP.
63 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
64 Please Input new ones /or Ctrl-C to discard
65 Input device IP () ==:
66 Input server IP () ==:
67 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
68 which kernel partition to update (1/2/3=both) (2) ==:3
69
70 NetTxPacket = 0x8FFE3200
71
72 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
73
74 NetLoop,call eth_halt !
75
76 NetLoop,call eth_init !
77 Trying Eth0 (10/100-M)
78
79 Waitting for RX_DMA_BUSY status Start... done
80
81
82 ETH_STATE_ACTIVE!!
83 TFTP from server ; our IP address is
84 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
85
86 TIMEOUT_COUNT=10,Load address: 0x80100000
87 Loading: Got ARP REPLY, set server/gtwy eth addr ()
88 Got it
89 #################################################################
90 #################################################################
91 #################################################################
92 #################################################################
93 #################################################################
94 #################################################################
95 #################################################################
96 #################################################################
97 #################################################################
98 #################################################################
99 #################################################################
100 #################################################################
101 #################################################################
102 #################################################################
103 #################################################################
104 #################################################################
105 #################################################################
106 ################################################
107 done
108 Bytes transferred = 5898496 (5a0100 hex)
109 LoadAddr=80100000 NetBootFileXferSize= 005a0100
110 ranand_erase: start:180000, len:20000
111 ..ranand_erase: start:1a0000, len:20000
112 ..ranand_erase: start:1c0000, len:20000
113 ...
114 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
115 Done!
116 ranand_erase: start:2980000, len:20000
117 ..ranand_erase: start:29a0000, len:20000
118 ..ranand_erase: start:29c0000, len:20000
119 ...
120 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
121 Done!
122 ## Booting image at bc180000 ...
123 Image Name: MIPS OpenWrt Linux-4.14.141
124 Image Type: MIPS Linux Kernel Image (lzma compressed)
125 Data Size: 2010110 Bytes = 1.9 MB
126 Load Address: 80001000
127 Entry Point: 80001000
128 ............................... Verifying Checksum ... OK
129 Uncompressing Kernel Image ... OK
130 No initrd
131 ## Transferring control to Linux (at address 80001000) ...
132 ## Giving linux memsize in MB, 256
133
134 Starting kernel ...
135
136 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
137 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
138 [ 0.000000] bootconsole [early0] enabled
139 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
140 [ 0.000000] MIPS: machine is Linksys EA8100
141 [ 0.000000] Determined physical RAM map:
142 [ 0.000000] memory: 10000000 @ 00000000 (usable)
143 [ 0.000000] Initrd not found or empty - disabling initrd
144 [ 0.000000] VPE topology {2,2} total 4
145 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
146 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
147 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
148 [ 0.000000] Zone ranges:
149 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
150 [ 0.000000] HighMem empty
151 [ 0.000000] Movable zone start for each node
152 [ 0.000000] Early memory node ranges
153 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
154 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
155 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
156 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
157 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
158 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
159 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
160 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
161 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
162 [ 0.000000] Writing ErrCtl register=0002c420
163 [ 0.000000] Readback ErrCtl register=0002c420
164 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
165 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
166 [ 0.000000] Hierarchical RCU implementation.
167 [ 0.000000] NR_IRQS: 256
168 [ 0.000000] CPU Clock: 880MHz
169 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
170 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
171 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
172 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
173 [ 0.073969] pid_max: default: 32768 minimum: 301
174 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
175 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
176 [ 0.094340] Hierarchical SRCU implementation.
177 [ 0.099495] smp: Bringing up secondary CPUs ...
178 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
179 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
180 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
181 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
182 [ 0.164211] Synchronize counters for CPU 1: done.
183 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
184 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
185 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
186 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
187 [ 0.255179] Synchronize counters for CPU 2: done.
188 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
189 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
190 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
191 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
192 [ 0.340367] Synchronize counters for CPU 3: done.
193 [ 0.370232] smp: Brought up 1 node, 4 CPUs
194 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
195 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
196 [ 0.394408] pinctrl core: initialized pinctrl subsystem
197 [ 0.401009] NET: Registered protocol family 16
198 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
199 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
200 [ 0.725598] ***** Xtal 40MHz *****
201 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
202 [ 0.734049] Port 0 N_FTS = 1b102800
203 [ 0.737517] Port 1 N_FTS = 1b102800
204 [ 0.740963] Port 2 N_FTS = 1b102800
205 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
206 [ 1.900719] -> 21007f2
207 [ 1.903123] PCIE0 enabled
208 [ 1.905712] PCIE1 enabled
209 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
210 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
211 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
212 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
213 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
214 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
215 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
216 [ 1.958178] PCI host bridge to bus 0000:00
217 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
218 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
219 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
220 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
221 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
222 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
223 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
224 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
225 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
226 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
227 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
228 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
229 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
230 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
231 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
232 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
233 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
234 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
235 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
236 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
237 [ 2.100582] clocksource: Switched to clocksource GIC
238 [ 2.107275] NET: Registered protocol family 2
239 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
240 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
241 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
242 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
243 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
244 [ 2.144212] NET: Registered protocol family 1
245 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
246 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
247 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
248 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
249 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
250 [ 2.425815] random: fast init done
251 [ 2.430745] io scheduler noop registered
252 [ 2.434579] io scheduler deadline registered (default)
253 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
254 [ 2.448257] console [ttyS0] disabled
255 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
256 [ 2.460836] console [ttyS0] enabled
257 [ 2.460836] console [ttyS0] enabled
258 [ 2.467691] bootconsole [early0] disabled
259 [ 2.467691] bootconsole [early0] disabled
260 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
261 [ 2.484816] Enable NFI Clock
262 [ 2.487689] # MTK NAND # : Use HW ECC
263 [ 2.491382] Device not found, ID: c2f1
264 [ 2.495110] Not Support this Device!
265 [ 2.498835] chip_mode=00000001
266 [ 2.501893] Support this Device in MTK table! c2f1
267 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
268 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
269 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
270 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
271 [ 2.531927] Scanning device for bad blocks
272 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
273 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
274 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
275 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
276 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
277 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
278 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
279 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
280 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
281 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
282 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
283 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
284 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
285 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
286 [ 3.456742] [mtk_nand] probe successfully!
287 [ 3.461570] Signature matched and data read!
288 [ 3.465818] load_fact_bbt success 1023
289 [ 3.470276] libphy: Fixed MDIO Bus: probed
290 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
291 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
292 [ 3.556774] libphy: mdio: probed
293 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
294 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
295 [ 4.978262] NET: Registered protocol family 10
296 [ 4.984286] Segment Routing with IPv6
297 [ 4.988020] NET: Registered protocol family 17
298 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
299 [ 4.999621] UBI: auto-attach mtd9
300 [ 5.003015] ubi0: attaching mtd9
301 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
302 [ 5.039967] ubi0: scanning is finished
303 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
304 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
305 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
306 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
307 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
308 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
309 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
310 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
311 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
312 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
313 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
314 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
315 [ 5.165234] hctosys: unable to open rtc device (rtc0)
316 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
317 [ 5.195491] Freeing unused kernel memory: 1260K
318 [ 5.200022] This architecture does not have kernel memory protection.
319 [ 5.783744] init: Console is alive
320 [ 5.787378] init: - watchdog -
321 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
322 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
323 [ 6.591413] usbcore: registered new interface driver usbfs
324 [ 6.596966] usbcore: registered new interface driver hub
325 [ 6.602453] usbcore: registered new device driver usb
326 [ 6.615285] SCSI subsystem initialized
327 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
328 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
329 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
330 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
331 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
332 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
333 [ 6.676639] hub 1-0:1.0: USB hub found
334 [ 6.680467] hub 1-0:1.0: 2 ports detected
335 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
336 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
337 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
338 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
339 [ 6.713446] hub 2-0:1.0: USB hub found
340 [ 6.717275] hub 2-0:1.0: 1 port detected
341 [ 6.727313] usbcore: registered new interface driver usb-storage
342 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
343 [ 6.750877] init: - preinit -
344 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
345 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
346 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
347 [ 7.225920] scsi host0: usb-storage 2-1:1.0
348 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
349 Press the [f] key and hit [enter] to enter failsafe mode
350 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
351 [ 10.582466] UBIFS (ubi0:1): default file-system created
352 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
353 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
354 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
355 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
356 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
357 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
358 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
359 [ 10.756981] mount_root: switching to ubifs overlay
360 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
361 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
362 [ 10.876085] procd: - early -
363 [ 10.879061] procd: - watchdog -
364 [ 11.550737] procd: - watchdog -
365 [ 11.554202] procd: - ubus -
366 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
367 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
368 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
369 [ 11.625387] procd: - init -
370 Please press Enter to activate this console.
371 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
372 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
373 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
374 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
375 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
376 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
377 [ 12.127574] urngd: v1.0.0 started.
378 [ 12.145053] xt_time: kernel timezone is -0000
379 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
380 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
381 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
382 [ 12.241178]
383 [ 12.266469] random: crng init done
384 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
385 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
386 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
387 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
388 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
389 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
390 [ 20.161193]
391 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
392 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
393 [ 27.852570] PPP generic driver version 2.4.2
394 [ 27.858358] NET: Registered protocol family 24
395 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
396 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
397 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
398 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
399 [ 41.299522] device eth0.2 entered promiscuous mode
400 [ 41.304484] device eth0 entered promiscuous mode
401 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
402 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
403 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
404 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
405
406
407
408 BusyBox v1.31.0 () built-in shell (ash)
409
410 _______ ________ __
411 | |.-----.-----.-----.| | | |.----.| |_
412 | - || _ | -__| || | | || _|| _|
413 |_______|| __|_____|__|__||________||__| |____|
414 |__| W I R E L E S S F R E E D O M
415 -----------------------------------------------------
416 OpenWrt SNAPSHOT, r10942-9bebafcb5d
417 -----------------------------------------------------
418 === WARNING! =====================================
419 There is no root password defined on this device!
420 Use the "passwd" command to set up a new password
421 in order to prevent unauthorized SSH logins.
422 --------------------------------------------------
423 root@OpenWrt:/# ifconfig -a
424 br-lan Link encap:Ethernet HWaddr
425 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
426 inet6 addr: fde0:62db:5134::1/60 Scope:Global
427 inet6 addr: fe80::/64 Scope:Link
428 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
429 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
430 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
431 collisions:0 txqueuelen:1000
432 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
433
434 eth0 Link encap:Ethernet HWaddr
435 inet6 addr: fe80::/64 Scope:Link
436 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
437 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
438 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
439 collisions:0 txqueuelen:1000
440 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
441 Interrupt:21
442
443 eth0.1 Link encap:Ethernet HWaddr
444 inet6 addr: fe80::/64 Scope:Link
445 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
446 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
447 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
448 collisions:0 txqueuelen:1000
449 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
450
451 eth0.2 Link encap:Ethernet HWaddr
452 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
453 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
454 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
455 collisions:0 txqueuelen:1000
456 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
457
458 lo Link encap:Local Loopback
459 inet addr:127.0.0.1 Mask:255.0.0.0
460 inet6 addr: ::1/128 Scope:Host
461 UP LOOPBACK RUNNING MTU:65536 Metric:1
462 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
463 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
464 collisions:0 txqueuelen:1000
465 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
466
467 wlan0 Link encap:Ethernet HWaddr
468 BROADCAST MULTICAST MTU:1500 Metric:1
469 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
470 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
471 collisions:0 txqueuelen:1000
472 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
473
474 wlan1 Link encap:Ethernet HWaddr
475 BROADCAST MULTICAST MTU:1500 Metric:1
476 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
477 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
478 collisions:0 txqueuelen:1000
479 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
480
481 root@OpenWrt:/# ls -l
482 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
483 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
484 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
485 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
486 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
487 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
488 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
489 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
490 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
491 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
492 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
493 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
494 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
495 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
496 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
497 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
498 root@OpenWrt:/# ps
499 PID USER VSZ STAT COMMAND
500 1 root 1576 S /sbin/procd
501 2 root 0 SW [kthreadd]
502 3 root 0 IW [kworker/0:0]
503 4 root 0 IW< [kworker/0:0H]
504 5 root 0 IW [kworker/u8:0]
505 6 root 0 IW< [mm_percpu_wq]
506 7 root 0 SW [ksoftirqd/0]
507 8 root 0 IW [rcu_sched]
508 9 root 0 IW [rcu_bh]
509 10 root 0 SW [migration/0]
510 11 root 0 SW [cpuhp/0]
511 12 root 0 SW [cpuhp/1]
512 13 root 0 SW [migration/1]
513 14 root 0 SW [ksoftirqd/1]
514 16 root 0 IW< [kworker/1:0H]
515 17 root 0 SW [cpuhp/2]
516 18 root 0 SW [migration/2]
517 19 root 0 SW [ksoftirqd/2]
518 21 root 0 IW< [kworker/2:0H]
519 22 root 0 SW [cpuhp/3]
520 23 root 0 SW [migration/3]
521 24 root 0 SW [ksoftirqd/3]
522 25 root 0 IW [kworker/3:0]
523 26 root 0 IW< [kworker/3:0H]
524 27 root 0 IW< [netns]
525 41 root 0 IW [kworker/u8:3]
526 68 root 0 IW [kworker/3:1]
527 69 root 0 IW [kworker/2:1]
528 138 root 0 IW [kworker/1:1]
529 139 root 0 SW [oom_reaper]
530 140 root 0 IW< [writeback]
531 142 root 0 SW [kcompactd0]
532 143 root 0 IW< [crypto]
533 145 root 0 IW< [kblockd]
534 175 root 0 IW< [watchdogd]
535 199 root 0 SW [kswapd0]
536 268 root 0 IW< [pencrypt]
537 270 root 0 IW< [pdecrypt]
538 366 root 0 IW< [ipv6_addrconf]
539 378 root 0 SW [ubi_bgt0d]
540 383 root 0 IW< [kworker/0:1H]
541 384 root 0 IW< [kworker/2:1H]
542 385 root 0 IW [kworker/2:2]
543 386 root 0 IW< [kworker/3:1H]
544 389 root 0 IW< [kworker/1:1H]
545 429 root 0 IW [kworker/0:2]
546 437 root 0 IW [kworker/1:2]
547 453 root 0 SW [scsi_eh_0]
548 454 root 0 IW< [scsi_tmf_0]
549 455 root 0 SW [usb-storage]
550 496 root 0 SW [ubifs_bgt0_1]
551 573 root 1220 S /sbin/ubusd
552 574 root 1220 S /bin/ash --login
553 591 root 1028 S /sbin/urngd
554 660 root 0 IW< [cfg80211]
555 1012 root 1248 S /sbin/logd -S 64
556 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
557 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
558 1168 root 1700 S /sbin/netifd
559 1204 root 1448 S /usr/sbin/odhcpd
560 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
561 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
562 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
563 1720 root 1212 R ps
564 root@OpenWrt:/etc# ping www.google.co
565 PING www.google.co (): 56 data bytes
566 64 bytes from : seq=0 ttl=52 time=4.718 ms
567 ^C
568 --- www.google.co ping statistics ---
569 1 packets transmitted, 1 packets received, 0% packet loss
570 round-trip min/avg/max = 4.718/4.718/4.718 ms
571 root@OpenWrt:/etc# ping www.google.com
572 PING www.google.com (): 56 data bytes
573 64 bytes from : seq=0 ttl=47 time=4.927 ms
574 64 bytes from : seq=1 ttl=47 time=4.687 ms
575 ^C
576 --- www.google.com ping statistics ---
577 2 packets transmitted, 2 packets received, 0% packet loss
578 round-trip min/avg/max = 4.687/4.807/4.927 ms
579 root@OpenWrt:/etc# opkg update
580 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
581 Updated list of available packages in /var/opkg-lists/openwrt_core
582 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
583 Signature check passed.
584 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
585 Updated list of available packages in /var/opkg-lists/openwrt_base
586 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
587 Signature check passed.
588 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
589 Updated list of available packages in /var/opkg-lists/openwrt_luci
590 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
591 Signature check passed.
592 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
593 Updated list of available packages in /var/opkg-lists/openwrt_packages
594 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
595 Signature check passed.
596 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
597 Updated list of available packages in /var/opkg-lists/openwrt_routing
598 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
599 Signature check passed.
600 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
601 Updated list of available packages in /var/opkg-lists/openwrt_telephony
602 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
603 Signature check passed.
604 root@OpenWrt:/etc# opkg install luci
605 Installing luci (git-19.241.65047-dffe9ca-1) to root...
606 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
607 Installing uhttpd (2019-08-17-6b03f960-3) to root...
608 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
609 Installing liblua5.1.5 (5.1.5-5) to root...
610 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
611 Installing lua (5.1.5-5) to root...
612 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
613 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
614 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
615 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
616 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
617 Installing rpcd (2019-06-05-89bfaa42-3) to root...
618 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
619 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
620 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
621 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
622 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
623 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
624 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
625 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
626 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
627 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
628 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
629 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
630 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
631 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
632 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
633 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
634 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
635 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
636 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
637 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
638 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
639 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
640 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
641 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
642 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
643 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
644 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
645 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
646 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
647 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
648 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
649 Installing rpcd-mod-rrdns (20170710) to root...
650 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
651 Configuring liblucihttp0.
652 Configuring luci-app-opkg.
653 Configuring rpcd.
654 Configuring liblua5.1.5.
655 Configuring luci-lib-ip.
656 Configuring libubus-lua.
657 Configuring libiwinfo-lua.
658 Configuring lua.
659 Configuring luci-lib-nixio.
660 Configuring luci-lib-jsonc.
661 Configuring liblucihttp-lua.
662 Configuring luci-base.
663 Configuring luci-mod-system.
664 Configuring luci-theme-bootstrap.
665 Configuring luci-mod-status.
666 Configuring luci-app-firewall.
667 Configuring luci-proto-ppp.
668 Configuring luci-mod-network.
669 Configuring luci-mod-admin-full.
670 Configuring luci-proto-ipv6.
671 Configuring uhttpd.
672 Configuring rpcd-mod-rrdns.
673 Configuring luci.
674 root@OpenWrt:/etc# df -h
675 Filesystem Size Used Available Use% Mounted on
676 /dev/root 2.8M 2.8M 0 100% /rom
677 tmpfs 123.5M 764.0K 122.8M 1% /tmp
678 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
679 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
680 tmpfs 512.0K 0 512.0K 0% /dev
681 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
682 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
683 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
684 [ 2075.984368] device wlan0 entered promiscuous mode
685 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
686 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
687 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
688 [ 2096.494533] device wlan0 left promiscuous mode
689 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
690 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
691 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
692 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
693 [ 2097.404922] device wlan0 entered promiscuous mode
694 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
695 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
696 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
697 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
698 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
699 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
700 [ 2117.964353] device wlan0 left promiscuous mode
701 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
702 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
703 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
704 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
705 [ 2118.804171] device wlan0 entered promiscuous mode
706 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
707 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
708 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
709 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
710 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
711 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
712 [ 2245.748473] device wlan0 left promiscuous mode
713 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
714 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
715 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
716 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
717 [ 2246.557667] device wlan0 entered promiscuous mode
718 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
719 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
720 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
721 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
722 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
723 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
724
725 root@OpenWrt:/etc#
726 root@OpenWrt:/etc# uci show wireless
727 wireless.radio0=wifi-device
728 wireless.radio0.type='mac80211'
729 wireless.radio0.channel='11'
730 wireless.radio0.hwmode='11g'
731 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
732 wireless.radio0.country='00'
733 wireless.radio0.legacy_rates='1'
734 wireless.radio0.htmode='HT20'
735 wireless.default_radio0=wifi-iface
736 wireless.default_radio0.device='radio0'
737 wireless.default_radio0.network='lan'
738 wireless.default_radio0.mode='ap'
739 wireless.default_radio0.encryption='psk2'
740 wireless.default_radio0.key='qwerty1234'
741 wireless.default_radio0.ssid='asdf'
742 wireless.radio1=wifi-device
743 wireless.radio1.type='mac80211'
744 wireless.radio1.channel='36'
745 wireless.radio1.hwmode='11a'
746 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
747 wireless.radio1.htmode='VHT80'
748 wireless.radio1.__toggle='Enable'
749 wireless.radio1.country='00'
750 wireless.radio1.legacy_rates='1'
751 wireless.default_radio1=wifi-iface
752 wireless.default_radio1.device='radio1'
753 wireless.default_radio1.network='lan'
754 wireless.default_radio1.mode='ap'
755 wireless.default_radio1.ssid='asdf'
756 wireless.default_radio1.encryption='psk2'
757 wireless.default_radio1.key='qwerty1234'
758 root@OpenWrt:/etc#
759 {{/code}}
760
761 Firmware:
762
763 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin