Skip to Content

Wiki source code of Openwrt for Linksys EA8100

Version 40.1 by Leon Poon on 2020/12/10 08:46
Hide last authors
Leon Poon 1.1 1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
Leon Poon 17.1 3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
Leon Poon 1.1 4
Leon Poon 2.1 5
Leon Poon 13.1 6 = 19.07.x =
7
Leon Poon 34.1 8 Openwrt 19.07.4 for EA8100 is here!
Leon Poon 13.1 9
Leon Poon 32.1 10 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.04:
Leon Poon 28.1 11
Leon Poon 32.1 12 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
13 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
14
Leon Poon 40.1 15 UPDATED 2020-12-10 the 19.07.04 builds now includes LuCi! Follow these instructions:
Leon Poon 32.1 16
Leon Poon 40.1 17 1. Grab initramfs-factory.img from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]] and flash it via Linksys UI.
18 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. Do NOT configure yet! It's not ready.
19 1. Then grab squashfs-sysupgrade.bin from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin]] and flash it via LuCi
20 1. Wait for it to reboot. Now you can configure!
Leon Poon 13.1 21
Leon Poon 29.1 22 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
Leon Poon 15.1 23
Leon Poon 35.1 24 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI. **HOWEVER: **upgrading will wipe entire firmware partitions! Backup your files/config before sysupgrade.
Leon Poon 13.1 25
Leon Poon 40.1 26 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
27
28 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
29
30 --How to flash if your router currently has stock Linksys firmware:--
31
32 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
33 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
34 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
35 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
36 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
37 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
38 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
39 1. --Run: ##opkg update##--
40 1. --Run: ##**opkg install luci**##--
41 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
42
Leon Poon 13.1 43 = 18.x =
44
Leon Poon 11.1 45 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
Leon Poon 2.1 46
Leon Poon 11.1 47 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
48 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
Leon Poon 6.1 49
Leon Poon 11.1 50 Note that sysupgrade to a newer image is not likely to work.
51
Leon Poon 12.1 52 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
Leon Poon 11.1 53 |[[image:1567332570723-651.png]]
54
Leon Poon 6.1 55 Dmesg:
56
57 {{code language="plain"}}
Leon Poon 11.1 58 3: Boot system code via Flash (default).
59 4: Entr boot command line interface.
60 7: Load Boot Loader code then write to Flash via Serial.
61 9: Load Boot Loader code then write to Flash via TFTP. 4
62 You choosed 2
63 0
Leon Poon 2.1 64
Leon Poon 11.1 65
66 2: System Load Linux Kernel then write to Flash via TFTP.
67 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
68 Please Input new ones /or Ctrl-C to discard
69 Input device IP () ==:
70 Input server IP () ==:
71 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
72 which kernel partition to update (1/2/3=both) (2) ==:3
73
74 NetTxPacket = 0x8FFE3200
75
76 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
77
78 NetLoop,call eth_halt !
79
80 NetLoop,call eth_init !
81 Trying Eth0 (10/100-M)
82
83 Waitting for RX_DMA_BUSY status Start... done
84
85
86 ETH_STATE_ACTIVE!!
87 TFTP from server ; our IP address is
88 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
89
90 TIMEOUT_COUNT=10,Load address: 0x80100000
91 Loading: Got ARP REPLY, set server/gtwy eth addr ()
92 Got it
93 #################################################################
94 #################################################################
95 #################################################################
96 #################################################################
97 #################################################################
98 #################################################################
99 #################################################################
100 #################################################################
101 #################################################################
102 #################################################################
103 #################################################################
104 #################################################################
105 #################################################################
106 #################################################################
107 #################################################################
108 #################################################################
109 #################################################################
110 ################################################
111 done
112 Bytes transferred = 5898496 (5a0100 hex)
113 LoadAddr=80100000 NetBootFileXferSize= 005a0100
114 ranand_erase: start:180000, len:20000
115 ..ranand_erase: start:1a0000, len:20000
116 ..ranand_erase: start:1c0000, len:20000
117 ...
118 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
119 Done!
120 ranand_erase: start:2980000, len:20000
121 ..ranand_erase: start:29a0000, len:20000
122 ..ranand_erase: start:29c0000, len:20000
123 ...
124 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
125 Done!
126 ## Booting image at bc180000 ...
127 Image Name: MIPS OpenWrt Linux-4.14.141
Leon Poon 2.1 128 Image Type: MIPS Linux Kernel Image (lzma compressed)
Leon Poon 11.1 129 Data Size: 2010110 Bytes = 1.9 MB
Leon Poon 2.1 130 Load Address: 80001000
131 Entry Point: 80001000
Leon Poon 11.1 132 ............................... Verifying Checksum ... OK
Leon Poon 2.1 133 Uncompressing Kernel Image ... OK
134 No initrd
Leon Poon 6.1 135 ## Transferring control to Linux (at address 80001000) ...
136 ## Giving linux memsize in MB, 256
Leon Poon 2.1 137
138 Starting kernel ...
139
Leon Poon 11.1 140 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
Leon Poon 2.1 141 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
142 [ 0.000000] bootconsole [early0] enabled
143 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
144 [ 0.000000] MIPS: machine is Linksys EA8100
145 [ 0.000000] Determined physical RAM map:
146 [ 0.000000] memory: 10000000 @ 00000000 (usable)
147 [ 0.000000] Initrd not found or empty - disabling initrd
148 [ 0.000000] VPE topology {2,2} total 4
149 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
150 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
151 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
152 [ 0.000000] Zone ranges:
153 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
154 [ 0.000000] HighMem empty
155 [ 0.000000] Movable zone start for each node
156 [ 0.000000] Early memory node ranges
157 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
158 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Leon Poon 11.1 159 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
160 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
161 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
Leon Poon 2.1 162 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
163 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
164 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
165 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Leon Poon 11.1 166 [ 0.000000] Writing ErrCtl register=0002c420
167 [ 0.000000] Readback ErrCtl register=0002c420
168 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
Leon Poon 2.1 169 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
170 [ 0.000000] Hierarchical RCU implementation.
171 [ 0.000000] NR_IRQS: 256
172 [ 0.000000] CPU Clock: 880MHz
173 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
174 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
175 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Leon Poon 11.1 176 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
177 [ 0.073969] pid_max: default: 32768 minimum: 301
178 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
179 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
180 [ 0.094340] Hierarchical SRCU implementation.
181 [ 0.099495] smp: Bringing up secondary CPUs ...
182 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
183 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
184 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
185 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
186 [ 0.164211] Synchronize counters for CPU 1: done.
187 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
188 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
189 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
190 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
191 [ 0.255179] Synchronize counters for CPU 2: done.
192 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
193 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
194 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
195 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
196 [ 0.340367] Synchronize counters for CPU 3: done.
197 [ 0.370232] smp: Brought up 1 node, 4 CPUs
198 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
199 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
200 [ 0.394408] pinctrl core: initialized pinctrl subsystem
201 [ 0.401009] NET: Registered protocol family 16
202 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
203 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
204 [ 0.725598] ***** Xtal 40MHz *****
205 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
206 [ 0.734049] Port 0 N_FTS = 1b102800
207 [ 0.737517] Port 1 N_FTS = 1b102800
208 [ 0.740963] Port 2 N_FTS = 1b102800
209 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
210 [ 1.900719] -> 21007f2
211 [ 1.903123] PCIE0 enabled
212 [ 1.905712] PCIE1 enabled
213 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
214 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
215 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
216 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
217 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
218 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
219 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
220 [ 1.958178] PCI host bridge to bus 0000:00
221 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
222 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
223 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
224 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
225 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
226 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
227 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
228 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
229 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
230 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
231 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
232 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
233 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
234 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
235 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
236 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
237 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
238 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
239 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
240 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
241 [ 2.100582] clocksource: Switched to clocksource GIC
242 [ 2.107275] NET: Registered protocol family 2
243 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
244 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
245 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
246 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
247 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
248 [ 2.144212] NET: Registered protocol family 1
249 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
250 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
251 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
252 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
253 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
254 [ 2.425815] random: fast init done
255 [ 2.430745] io scheduler noop registered
256 [ 2.434579] io scheduler deadline registered (default)
257 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
258 [ 2.448257] console [ttyS0] disabled
259 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
260 [ 2.460836] console [ttyS0] enabled
261 [ 2.460836] console [ttyS0] enabled
262 [ 2.467691] bootconsole [early0] disabled
263 [ 2.467691] bootconsole [early0] disabled
264 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
265 [ 2.484816] Enable NFI Clock
266 [ 2.487689] # MTK NAND # : Use HW ECC
267 [ 2.491382] Device not found, ID: c2f1
268 [ 2.495110] Not Support this Device!
269 [ 2.498835] chip_mode=00000001
270 [ 2.501893] Support this Device in MTK table! c2f1
271 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
272 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
273 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
274 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
275 [ 2.531927] Scanning device for bad blocks
276 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
277 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
278 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
279 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
280 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
281 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
282 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
283 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
284 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
285 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
286 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
287 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
288 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
289 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
290 [ 3.456742] [mtk_nand] probe successfully!
291 [ 3.461570] Signature matched and data read!
292 [ 3.465818] load_fact_bbt success 1023
293 [ 3.470276] libphy: Fixed MDIO Bus: probed
294 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
295 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
296 [ 3.556774] libphy: mdio: probed
297 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
298 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
299 [ 4.978262] NET: Registered protocol family 10
300 [ 4.984286] Segment Routing with IPv6
301 [ 4.988020] NET: Registered protocol family 17
302 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
303 [ 4.999621] UBI: auto-attach mtd9
304 [ 5.003015] ubi0: attaching mtd9
305 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
306 [ 5.039967] ubi0: scanning is finished
307 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
308 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
309 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
310 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
311 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
312 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
313 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
314 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
315 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
316 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
317 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
318 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
319 [ 5.165234] hctosys: unable to open rtc device (rtc0)
320 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
321 [ 5.195491] Freeing unused kernel memory: 1260K
322 [ 5.200022] This architecture does not have kernel memory protection.
323 [ 5.783744] init: Console is alive
324 [ 5.787378] init: - watchdog -
325 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
326 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
327 [ 6.591413] usbcore: registered new interface driver usbfs
328 [ 6.596966] usbcore: registered new interface driver hub
329 [ 6.602453] usbcore: registered new device driver usb
330 [ 6.615285] SCSI subsystem initialized
331 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
332 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
333 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
334 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
335 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
336 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
337 [ 6.676639] hub 1-0:1.0: USB hub found
338 [ 6.680467] hub 1-0:1.0: 2 ports detected
339 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
340 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
341 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
342 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
343 [ 6.713446] hub 2-0:1.0: USB hub found
344 [ 6.717275] hub 2-0:1.0: 1 port detected
345 [ 6.727313] usbcore: registered new interface driver usb-storage
346 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
347 [ 6.750877] init: - preinit -
348 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
349 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
350 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
351 [ 7.225920] scsi host0: usb-storage 2-1:1.0
352 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
Leon Poon 2.1 353 Press the [f] key and hit [enter] to enter failsafe mode
354 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Leon Poon 11.1 355 [ 10.582466] UBIFS (ubi0:1): default file-system created
356 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
357 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
358 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
359 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
360 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
361 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
362 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
363 [ 10.756981] mount_root: switching to ubifs overlay
364 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
365 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
366 [ 10.876085] procd: - early -
367 [ 10.879061] procd: - watchdog -
368 [ 11.550737] procd: - watchdog -
369 [ 11.554202] procd: - ubus -
370 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
371 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
372 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
373 [ 11.625387] procd: - init -
Leon Poon 2.1 374 Please press Enter to activate this console.
Leon Poon 11.1 375 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
376 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
377 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
378 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
379 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
380 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
381 [ 12.127574] urngd: v1.0.0 started.
382 [ 12.145053] xt_time: kernel timezone is -0000
383 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
384 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
385 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
386 [ 12.241178]
387 [ 12.266469] random: crng init done
388 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
389 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
390 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
391 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
392 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
393 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
394 [ 20.161193]
395 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
396 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
397 [ 27.852570] PPP generic driver version 2.4.2
398 [ 27.858358] NET: Registered protocol family 24
399 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
400 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
401 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
402 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
403 [ 41.299522] device eth0.2 entered promiscuous mode
404 [ 41.304484] device eth0 entered promiscuous mode
405 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
406 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
407 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
408 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Leon Poon 2.1 409
410
411
Leon Poon 11.1 412 BusyBox v1.31.0 () built-in shell (ash)
413
Leon Poon 6.1 414 _______ ________ __
415 | |.-----.-----.-----.| | | |.----.| |_
416 | - || _ | -__| || | | || _|| _|
417 |_______|| __|_____|__|__||________||__| |____|
418 |__| W I R E L E S S F R E E D O M
419 -----------------------------------------------------
Leon Poon 11.1 420 OpenWrt SNAPSHOT, r10942-9bebafcb5d
Leon Poon 6.1 421 -----------------------------------------------------
422 === WARNING! =====================================
Leon Poon 2.1 423 There is no root password defined on this device!
424 Use the "passwd" command to set up a new password
425 in order to prevent unauthorized SSH logins.
Leon Poon 6.1 426 --------------------------------------------------
Leon Poon 11.1 427 root@OpenWrt:/# ifconfig -a
428 br-lan Link encap:Ethernet HWaddr
429 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
430 inet6 addr: fde0:62db:5134::1/60 Scope:Global
431 inet6 addr: fe80::/64 Scope:Link
432 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
433 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
434 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
435 collisions:0 txqueuelen:1000
436 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
437
438 eth0 Link encap:Ethernet HWaddr
439 inet6 addr: fe80::/64 Scope:Link
440 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
441 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
442 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
443 collisions:0 txqueuelen:1000
444 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
445 Interrupt:21
446
447 eth0.1 Link encap:Ethernet HWaddr
448 inet6 addr: fe80::/64 Scope:Link
449 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
450 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
451 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
452 collisions:0 txqueuelen:1000
453 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
454
455 eth0.2 Link encap:Ethernet HWaddr
456 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
457 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
458 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
459 collisions:0 txqueuelen:1000
460 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
461
462 lo Link encap:Local Loopback
463 inet addr:127.0.0.1 Mask:255.0.0.0
464 inet6 addr: ::1/128 Scope:Host
465 UP LOOPBACK RUNNING MTU:65536 Metric:1
466 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
467 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
468 collisions:0 txqueuelen:1000
469 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
470
471 wlan0 Link encap:Ethernet HWaddr
472 BROADCAST MULTICAST MTU:1500 Metric:1
473 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
474 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
475 collisions:0 txqueuelen:1000
476 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
477
478 wlan1 Link encap:Ethernet HWaddr
479 BROADCAST MULTICAST MTU:1500 Metric:1
480 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
481 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
482 collisions:0 txqueuelen:1000
483 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
484
485 root@OpenWrt:/# ls -l
486 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
487 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
488 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
489 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
490 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
491 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
492 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
493 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
494 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
495 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
496 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
497 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
498 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
499 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
500 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
501 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
502 root@OpenWrt:/# ps
503 PID USER VSZ STAT COMMAND
504 1 root 1576 S /sbin/procd
505 2 root 0 SW [kthreadd]
506 3 root 0 IW [kworker/0:0]
507 4 root 0 IW< [kworker/0:0H]
508 5 root 0 IW [kworker/u8:0]
509 6 root 0 IW< [mm_percpu_wq]
510 7 root 0 SW [ksoftirqd/0]
511 8 root 0 IW [rcu_sched]
512 9 root 0 IW [rcu_bh]
513 10 root 0 SW [migration/0]
514 11 root 0 SW [cpuhp/0]
515 12 root 0 SW [cpuhp/1]
516 13 root 0 SW [migration/1]
517 14 root 0 SW [ksoftirqd/1]
518 16 root 0 IW< [kworker/1:0H]
519 17 root 0 SW [cpuhp/2]
520 18 root 0 SW [migration/2]
521 19 root 0 SW [ksoftirqd/2]
522 21 root 0 IW< [kworker/2:0H]
523 22 root 0 SW [cpuhp/3]
524 23 root 0 SW [migration/3]
525 24 root 0 SW [ksoftirqd/3]
526 25 root 0 IW [kworker/3:0]
527 26 root 0 IW< [kworker/3:0H]
528 27 root 0 IW< [netns]
529 41 root 0 IW [kworker/u8:3]
530 68 root 0 IW [kworker/3:1]
531 69 root 0 IW [kworker/2:1]
532 138 root 0 IW [kworker/1:1]
533 139 root 0 SW [oom_reaper]
534 140 root 0 IW< [writeback]
535 142 root 0 SW [kcompactd0]
536 143 root 0 IW< [crypto]
537 145 root 0 IW< [kblockd]
538 175 root 0 IW< [watchdogd]
539 199 root 0 SW [kswapd0]
540 268 root 0 IW< [pencrypt]
541 270 root 0 IW< [pdecrypt]
542 366 root 0 IW< [ipv6_addrconf]
543 378 root 0 SW [ubi_bgt0d]
544 383 root 0 IW< [kworker/0:1H]
545 384 root 0 IW< [kworker/2:1H]
546 385 root 0 IW [kworker/2:2]
547 386 root 0 IW< [kworker/3:1H]
548 389 root 0 IW< [kworker/1:1H]
549 429 root 0 IW [kworker/0:2]
550 437 root 0 IW [kworker/1:2]
551 453 root 0 SW [scsi_eh_0]
552 454 root 0 IW< [scsi_tmf_0]
553 455 root 0 SW [usb-storage]
554 496 root 0 SW [ubifs_bgt0_1]
555 573 root 1220 S /sbin/ubusd
556 574 root 1220 S /bin/ash --login
557 591 root 1028 S /sbin/urngd
558 660 root 0 IW< [cfg80211]
559 1012 root 1248 S /sbin/logd -S 64
560 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
561 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
562 1168 root 1700 S /sbin/netifd
563 1204 root 1448 S /usr/sbin/odhcpd
564 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
565 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
566 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
567 1720 root 1212 R ps
568 root@OpenWrt:/etc# ping www.google.co
569 PING www.google.co (): 56 data bytes
570 64 bytes from : seq=0 ttl=52 time=4.718 ms
571 ^C
572 --- www.google.co ping statistics ---
573 1 packets transmitted, 1 packets received, 0% packet loss
574 round-trip min/avg/max = 4.718/4.718/4.718 ms
575 root@OpenWrt:/etc# ping www.google.com
576 PING www.google.com (): 56 data bytes
577 64 bytes from : seq=0 ttl=47 time=4.927 ms
578 64 bytes from : seq=1 ttl=47 time=4.687 ms
579 ^C
580 --- www.google.com ping statistics ---
581 2 packets transmitted, 2 packets received, 0% packet loss
582 round-trip min/avg/max = 4.687/4.807/4.927 ms
583 root@OpenWrt:/etc# opkg update
584 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
585 Updated list of available packages in /var/opkg-lists/openwrt_core
586 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
587 Signature check passed.
588 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
589 Updated list of available packages in /var/opkg-lists/openwrt_base
590 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
591 Signature check passed.
592 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
593 Updated list of available packages in /var/opkg-lists/openwrt_luci
594 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
595 Signature check passed.
596 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
597 Updated list of available packages in /var/opkg-lists/openwrt_packages
598 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
599 Signature check passed.
600 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
601 Updated list of available packages in /var/opkg-lists/openwrt_routing
602 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
603 Signature check passed.
604 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
605 Updated list of available packages in /var/opkg-lists/openwrt_telephony
606 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
607 Signature check passed.
608 root@OpenWrt:/etc# opkg install luci
609 Installing luci (git-19.241.65047-dffe9ca-1) to root...
610 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
611 Installing uhttpd (2019-08-17-6b03f960-3) to root...
612 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
613 Installing liblua5.1.5 (5.1.5-5) to root...
614 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
615 Installing lua (5.1.5-5) to root...
616 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
617 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
618 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
619 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
620 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
621 Installing rpcd (2019-06-05-89bfaa42-3) to root...
622 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
623 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
624 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
625 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
626 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
627 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
628 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
629 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
630 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
631 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
632 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
633 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
634 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
635 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
636 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
637 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
638 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
639 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
640 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
641 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
642 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
643 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
644 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
645 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
646 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
647 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
648 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
649 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
650 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
651 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
652 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
653 Installing rpcd-mod-rrdns (20170710) to root...
654 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
655 Configuring liblucihttp0.
656 Configuring luci-app-opkg.
657 Configuring rpcd.
658 Configuring liblua5.1.5.
659 Configuring luci-lib-ip.
660 Configuring libubus-lua.
661 Configuring libiwinfo-lua.
662 Configuring lua.
663 Configuring luci-lib-nixio.
664 Configuring luci-lib-jsonc.
665 Configuring liblucihttp-lua.
666 Configuring luci-base.
667 Configuring luci-mod-system.
668 Configuring luci-theme-bootstrap.
669 Configuring luci-mod-status.
670 Configuring luci-app-firewall.
671 Configuring luci-proto-ppp.
672 Configuring luci-mod-network.
673 Configuring luci-mod-admin-full.
674 Configuring luci-proto-ipv6.
675 Configuring uhttpd.
676 Configuring rpcd-mod-rrdns.
677 Configuring luci.
678 root@OpenWrt:/etc# df -h
Leon Poon 2.1 679 Filesystem Size Used Available Use% Mounted on
Leon Poon 11.1 680 /dev/root 2.8M 2.8M 0 100% /rom
681 tmpfs 123.5M 764.0K 122.8M 1% /tmp
682 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
683 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
Leon Poon 6.1 684 tmpfs 512.0K 0 512.0K 0% /dev
Leon Poon 11.1 685 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
686 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
687 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
688 [ 2075.984368] device wlan0 entered promiscuous mode
689 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
690 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
691 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
692 [ 2096.494533] device wlan0 left promiscuous mode
693 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
694 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
695 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
696 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
697 [ 2097.404922] device wlan0 entered promiscuous mode
698 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
699 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
700 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
701 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
702 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
703 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
704 [ 2117.964353] device wlan0 left promiscuous mode
705 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
706 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
707 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
708 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
709 [ 2118.804171] device wlan0 entered promiscuous mode
710 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
711 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
712 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
713 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
714 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
715 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
716 [ 2245.748473] device wlan0 left promiscuous mode
717 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
718 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
719 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
720 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
721 [ 2246.557667] device wlan0 entered promiscuous mode
722 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
723 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
724 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
725 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
726 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
727 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
728
729 root@OpenWrt:/etc#
730 root@OpenWrt:/etc# uci show wireless
731 wireless.radio0=wifi-device
732 wireless.radio0.type='mac80211'
733 wireless.radio0.channel='11'
734 wireless.radio0.hwmode='11g'
735 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
736 wireless.radio0.country='00'
737 wireless.radio0.legacy_rates='1'
738 wireless.radio0.htmode='HT20'
739 wireless.default_radio0=wifi-iface
740 wireless.default_radio0.device='radio0'
741 wireless.default_radio0.network='lan'
742 wireless.default_radio0.mode='ap'
743 wireless.default_radio0.encryption='psk2'
744 wireless.default_radio0.key='qwerty1234'
745 wireless.default_radio0.ssid='asdf'
746 wireless.radio1=wifi-device
747 wireless.radio1.type='mac80211'
748 wireless.radio1.channel='36'
749 wireless.radio1.hwmode='11a'
750 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
751 wireless.radio1.htmode='VHT80'
752 wireless.radio1.__toggle='Enable'
753 wireless.radio1.country='00'
754 wireless.radio1.legacy_rates='1'
755 wireless.default_radio1=wifi-iface
756 wireless.default_radio1.device='radio1'
757 wireless.default_radio1.network='lan'
758 wireless.default_radio1.mode='ap'
759 wireless.default_radio1.ssid='asdf'
760 wireless.default_radio1.encryption='psk2'
761 wireless.default_radio1.key='qwerty1234'
762 root@OpenWrt:/etc#
Leon Poon 6.1 763 {{/code}}
Leon Poon 12.1 764
765 Firmware:
766
767 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin