Wiki source code of Openwrt for Linksys EA8100

Version 41.1 by Leon Poon on 2020/12/10 08:50
Hide last authors
Leon Poon 1.1 1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
Leon Poon 17.1 3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
Leon Poon 1.1 4
Leon Poon 2.1 5
Leon Poon 13.1 6 = 19.07.x =
7
Leon Poon 34.1 8 Openwrt 19.07.4 for EA8100 is here!
Leon Poon 13.1 9
Leon Poon 32.1 10 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.04:
Leon Poon 28.1 11
Leon Poon 32.1 12 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
13 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
14
Leon Poon 40.1 15 UPDATED 2020-12-10 the 19.07.04 builds now includes LuCi! Follow these instructions:
Leon Poon 32.1 16
Leon Poon 40.1 17 1. Grab initramfs-factory.img from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]] and flash it via Linksys UI.
18 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. Do NOT configure yet! It's not ready.
19 1. Then grab squashfs-sysupgrade.bin from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.4/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin]] and flash it via LuCi
20 1. Wait for it to reboot. Now you can configure!
Leon Poon 13.1 21
Leon Poon 29.1 22 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
Leon Poon 15.1 23
Leon Poon 41.1 24 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
Leon Poon 13.1 25
Leon Poon 41.1 26 {{warning}}
27 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
28 {{/warning}}
29
Leon Poon 40.1 30 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
31
32 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
33
34 --How to flash if your router currently has stock Linksys firmware:--
35
36 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
37 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
38 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
39 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
40 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
41 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
42 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
43 1. --Run: ##opkg update##--
44 1. --Run: ##**opkg install luci**##--
45 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
46
Leon Poon 13.1 47 = 18.x =
48
Leon Poon 11.1 49 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
Leon Poon 2.1 50
Leon Poon 11.1 51 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
52 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
Leon Poon 6.1 53
Leon Poon 11.1 54 Note that sysupgrade to a newer image is not likely to work.
55
Leon Poon 12.1 56 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
Leon Poon 11.1 57 |[[image:1567332570723-651.png]]
58
Leon Poon 6.1 59 Dmesg:
60
61 {{code language="plain"}}
Leon Poon 11.1 62 3: Boot system code via Flash (default).
63 4: Entr boot command line interface.
64 7: Load Boot Loader code then write to Flash via Serial.
65 9: Load Boot Loader code then write to Flash via TFTP. 4
66 You choosed 2
67 0
Leon Poon 2.1 68
Leon Poon 11.1 69
70 2: System Load Linux Kernel then write to Flash via TFTP.
71 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
72 Please Input new ones /or Ctrl-C to discard
73 Input device IP () ==:
74 Input server IP () ==:
75 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
76 which kernel partition to update (1/2/3=both) (2) ==:3
77
78 NetTxPacket = 0x8FFE3200
79
80 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
81
82 NetLoop,call eth_halt !
83
84 NetLoop,call eth_init !
85 Trying Eth0 (10/100-M)
86
87 Waitting for RX_DMA_BUSY status Start... done
88
89
90 ETH_STATE_ACTIVE!!
91 TFTP from server ; our IP address is
92 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
93
94 TIMEOUT_COUNT=10,Load address: 0x80100000
95 Loading: Got ARP REPLY, set server/gtwy eth addr ()
96 Got it
97 #################################################################
98 #################################################################
99 #################################################################
100 #################################################################
101 #################################################################
102 #################################################################
103 #################################################################
104 #################################################################
105 #################################################################
106 #################################################################
107 #################################################################
108 #################################################################
109 #################################################################
110 #################################################################
111 #################################################################
112 #################################################################
113 #################################################################
114 ################################################
115 done
116 Bytes transferred = 5898496 (5a0100 hex)
117 LoadAddr=80100000 NetBootFileXferSize= 005a0100
118 ranand_erase: start:180000, len:20000
119 ..ranand_erase: start:1a0000, len:20000
120 ..ranand_erase: start:1c0000, len:20000
121 ...
122 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
123 Done!
124 ranand_erase: start:2980000, len:20000
125 ..ranand_erase: start:29a0000, len:20000
126 ..ranand_erase: start:29c0000, len:20000
127 ...
128 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
129 Done!
130 ## Booting image at bc180000 ...
131 Image Name: MIPS OpenWrt Linux-4.14.141
Leon Poon 2.1 132 Image Type: MIPS Linux Kernel Image (lzma compressed)
Leon Poon 11.1 133 Data Size: 2010110 Bytes = 1.9 MB
Leon Poon 2.1 134 Load Address: 80001000
135 Entry Point: 80001000
Leon Poon 11.1 136 ............................... Verifying Checksum ... OK
Leon Poon 2.1 137 Uncompressing Kernel Image ... OK
138 No initrd
Leon Poon 6.1 139 ## Transferring control to Linux (at address 80001000) ...
140 ## Giving linux memsize in MB, 256
Leon Poon 2.1 141
142 Starting kernel ...
143
Leon Poon 11.1 144 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
Leon Poon 2.1 145 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
146 [ 0.000000] bootconsole [early0] enabled
147 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
148 [ 0.000000] MIPS: machine is Linksys EA8100
149 [ 0.000000] Determined physical RAM map:
150 [ 0.000000] memory: 10000000 @ 00000000 (usable)
151 [ 0.000000] Initrd not found or empty - disabling initrd
152 [ 0.000000] VPE topology {2,2} total 4
153 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
154 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
155 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
156 [ 0.000000] Zone ranges:
157 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
158 [ 0.000000] HighMem empty
159 [ 0.000000] Movable zone start for each node
160 [ 0.000000] Early memory node ranges
161 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
162 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Leon Poon 11.1 163 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
164 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
165 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
Leon Poon 2.1 166 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
167 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
168 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
169 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Leon Poon 11.1 170 [ 0.000000] Writing ErrCtl register=0002c420
171 [ 0.000000] Readback ErrCtl register=0002c420
172 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
Leon Poon 2.1 173 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
174 [ 0.000000] Hierarchical RCU implementation.
175 [ 0.000000] NR_IRQS: 256
176 [ 0.000000] CPU Clock: 880MHz
177 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
178 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
179 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Leon Poon 11.1 180 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
181 [ 0.073969] pid_max: default: 32768 minimum: 301
182 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
183 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
184 [ 0.094340] Hierarchical SRCU implementation.
185 [ 0.099495] smp: Bringing up secondary CPUs ...
186 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
187 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
188 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
189 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
190 [ 0.164211] Synchronize counters for CPU 1: done.
191 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
192 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
193 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
194 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
195 [ 0.255179] Synchronize counters for CPU 2: done.
196 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
197 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
198 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
199 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
200 [ 0.340367] Synchronize counters for CPU 3: done.
201 [ 0.370232] smp: Brought up 1 node, 4 CPUs
202 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
203 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
204 [ 0.394408] pinctrl core: initialized pinctrl subsystem
205 [ 0.401009] NET: Registered protocol family 16
206 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
207 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
208 [ 0.725598] ***** Xtal 40MHz *****
209 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
210 [ 0.734049] Port 0 N_FTS = 1b102800
211 [ 0.737517] Port 1 N_FTS = 1b102800
212 [ 0.740963] Port 2 N_FTS = 1b102800
213 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
214 [ 1.900719] -> 21007f2
215 [ 1.903123] PCIE0 enabled
216 [ 1.905712] PCIE1 enabled
217 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
218 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
219 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
220 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
221 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
222 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
223 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
224 [ 1.958178] PCI host bridge to bus 0000:00
225 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
226 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
227 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
228 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
229 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
230 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
231 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
232 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
233 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
234 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
235 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
236 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
237 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
238 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
239 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
240 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
241 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
242 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
243 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
244 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
245 [ 2.100582] clocksource: Switched to clocksource GIC
246 [ 2.107275] NET: Registered protocol family 2
247 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
248 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
249 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
250 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
251 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
252 [ 2.144212] NET: Registered protocol family 1
253 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
254 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
255 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
256 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
257 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
258 [ 2.425815] random: fast init done
259 [ 2.430745] io scheduler noop registered
260 [ 2.434579] io scheduler deadline registered (default)
261 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
262 [ 2.448257] console [ttyS0] disabled
263 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
264 [ 2.460836] console [ttyS0] enabled
265 [ 2.460836] console [ttyS0] enabled
266 [ 2.467691] bootconsole [early0] disabled
267 [ 2.467691] bootconsole [early0] disabled
268 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
269 [ 2.484816] Enable NFI Clock
270 [ 2.487689] # MTK NAND # : Use HW ECC
271 [ 2.491382] Device not found, ID: c2f1
272 [ 2.495110] Not Support this Device!
273 [ 2.498835] chip_mode=00000001
274 [ 2.501893] Support this Device in MTK table! c2f1
275 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
276 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
277 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
278 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
279 [ 2.531927] Scanning device for bad blocks
280 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
281 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
282 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
283 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
284 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
285 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
286 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
287 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
288 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
289 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
290 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
291 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
292 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
293 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
294 [ 3.456742] [mtk_nand] probe successfully!
295 [ 3.461570] Signature matched and data read!
296 [ 3.465818] load_fact_bbt success 1023
297 [ 3.470276] libphy: Fixed MDIO Bus: probed
298 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
299 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
300 [ 3.556774] libphy: mdio: probed
301 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
302 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
303 [ 4.978262] NET: Registered protocol family 10
304 [ 4.984286] Segment Routing with IPv6
305 [ 4.988020] NET: Registered protocol family 17
306 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
307 [ 4.999621] UBI: auto-attach mtd9
308 [ 5.003015] ubi0: attaching mtd9
309 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
310 [ 5.039967] ubi0: scanning is finished
311 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
312 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
313 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
314 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
315 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
316 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
317 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
318 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
319 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
320 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
321 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
322 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
323 [ 5.165234] hctosys: unable to open rtc device (rtc0)
324 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
325 [ 5.195491] Freeing unused kernel memory: 1260K
326 [ 5.200022] This architecture does not have kernel memory protection.
327 [ 5.783744] init: Console is alive
328 [ 5.787378] init: - watchdog -
329 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
330 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
331 [ 6.591413] usbcore: registered new interface driver usbfs
332 [ 6.596966] usbcore: registered new interface driver hub
333 [ 6.602453] usbcore: registered new device driver usb
334 [ 6.615285] SCSI subsystem initialized
335 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
336 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
337 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
338 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
339 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
340 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
341 [ 6.676639] hub 1-0:1.0: USB hub found
342 [ 6.680467] hub 1-0:1.0: 2 ports detected
343 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
344 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
345 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
346 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
347 [ 6.713446] hub 2-0:1.0: USB hub found
348 [ 6.717275] hub 2-0:1.0: 1 port detected
349 [ 6.727313] usbcore: registered new interface driver usb-storage
350 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
351 [ 6.750877] init: - preinit -
352 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
353 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
354 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
355 [ 7.225920] scsi host0: usb-storage 2-1:1.0
356 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
Leon Poon 2.1 357 Press the [f] key and hit [enter] to enter failsafe mode
358 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Leon Poon 11.1 359 [ 10.582466] UBIFS (ubi0:1): default file-system created
360 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
361 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
362 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
363 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
364 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
365 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
366 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
367 [ 10.756981] mount_root: switching to ubifs overlay
368 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
369 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
370 [ 10.876085] procd: - early -
371 [ 10.879061] procd: - watchdog -
372 [ 11.550737] procd: - watchdog -
373 [ 11.554202] procd: - ubus -
374 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
375 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
376 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
377 [ 11.625387] procd: - init -
Leon Poon 2.1 378 Please press Enter to activate this console.
Leon Poon 11.1 379 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
380 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
381 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
382 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
383 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
384 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
385 [ 12.127574] urngd: v1.0.0 started.
386 [ 12.145053] xt_time: kernel timezone is -0000
387 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
388 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
389 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
390 [ 12.241178]
391 [ 12.266469] random: crng init done
392 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
393 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
394 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
395 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
396 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
397 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
398 [ 20.161193]
399 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
400 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
401 [ 27.852570] PPP generic driver version 2.4.2
402 [ 27.858358] NET: Registered protocol family 24
403 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
404 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
405 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
406 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
407 [ 41.299522] device eth0.2 entered promiscuous mode
408 [ 41.304484] device eth0 entered promiscuous mode
409 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
410 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
411 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
412 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Leon Poon 2.1 413
414
415
Leon Poon 11.1 416 BusyBox v1.31.0 () built-in shell (ash)
417
Leon Poon 6.1 418 _______ ________ __
419 | |.-----.-----.-----.| | | |.----.| |_
420 | - || _ | -__| || | | || _|| _|
421 |_______|| __|_____|__|__||________||__| |____|
422 |__| W I R E L E S S F R E E D O M
423 -----------------------------------------------------
Leon Poon 11.1 424 OpenWrt SNAPSHOT, r10942-9bebafcb5d
Leon Poon 6.1 425 -----------------------------------------------------
426 === WARNING! =====================================
Leon Poon 2.1 427 There is no root password defined on this device!
428 Use the "passwd" command to set up a new password
429 in order to prevent unauthorized SSH logins.
Leon Poon 6.1 430 --------------------------------------------------
Leon Poon 11.1 431 root@OpenWrt:/# ifconfig -a
432 br-lan Link encap:Ethernet HWaddr
433 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
434 inet6 addr: fde0:62db:5134::1/60 Scope:Global
435 inet6 addr: fe80::/64 Scope:Link
436 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
437 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
438 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
439 collisions:0 txqueuelen:1000
440 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
441
442 eth0 Link encap:Ethernet HWaddr
443 inet6 addr: fe80::/64 Scope:Link
444 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
445 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
446 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
447 collisions:0 txqueuelen:1000
448 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
449 Interrupt:21
450
451 eth0.1 Link encap:Ethernet HWaddr
452 inet6 addr: fe80::/64 Scope:Link
453 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
454 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
455 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
456 collisions:0 txqueuelen:1000
457 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
458
459 eth0.2 Link encap:Ethernet HWaddr
460 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
461 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
462 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
463 collisions:0 txqueuelen:1000
464 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
465
466 lo Link encap:Local Loopback
467 inet addr:127.0.0.1 Mask:255.0.0.0
468 inet6 addr: ::1/128 Scope:Host
469 UP LOOPBACK RUNNING MTU:65536 Metric:1
470 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
471 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
472 collisions:0 txqueuelen:1000
473 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
474
475 wlan0 Link encap:Ethernet HWaddr
476 BROADCAST MULTICAST MTU:1500 Metric:1
477 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
478 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
479 collisions:0 txqueuelen:1000
480 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
481
482 wlan1 Link encap:Ethernet HWaddr
483 BROADCAST MULTICAST MTU:1500 Metric:1
484 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
485 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
486 collisions:0 txqueuelen:1000
487 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
488
489 root@OpenWrt:/# ls -l
490 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
491 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
492 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
493 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
494 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
495 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
496 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
497 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
498 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
499 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
500 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
501 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
502 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
503 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
504 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
505 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
506 root@OpenWrt:/# ps
507 PID USER VSZ STAT COMMAND
508 1 root 1576 S /sbin/procd
509 2 root 0 SW [kthreadd]
510 3 root 0 IW [kworker/0:0]
511 4 root 0 IW< [kworker/0:0H]
512 5 root 0 IW [kworker/u8:0]
513 6 root 0 IW< [mm_percpu_wq]
514 7 root 0 SW [ksoftirqd/0]
515 8 root 0 IW [rcu_sched]
516 9 root 0 IW [rcu_bh]
517 10 root 0 SW [migration/0]
518 11 root 0 SW [cpuhp/0]
519 12 root 0 SW [cpuhp/1]
520 13 root 0 SW [migration/1]
521 14 root 0 SW [ksoftirqd/1]
522 16 root 0 IW< [kworker/1:0H]
523 17 root 0 SW [cpuhp/2]
524 18 root 0 SW [migration/2]
525 19 root 0 SW [ksoftirqd/2]
526 21 root 0 IW< [kworker/2:0H]
527 22 root 0 SW [cpuhp/3]
528 23 root 0 SW [migration/3]
529 24 root 0 SW [ksoftirqd/3]
530 25 root 0 IW [kworker/3:0]
531 26 root 0 IW< [kworker/3:0H]
532 27 root 0 IW< [netns]
533 41 root 0 IW [kworker/u8:3]
534 68 root 0 IW [kworker/3:1]
535 69 root 0 IW [kworker/2:1]
536 138 root 0 IW [kworker/1:1]
537 139 root 0 SW [oom_reaper]
538 140 root 0 IW< [writeback]
539 142 root 0 SW [kcompactd0]
540 143 root 0 IW< [crypto]
541 145 root 0 IW< [kblockd]
542 175 root 0 IW< [watchdogd]
543 199 root 0 SW [kswapd0]
544 268 root 0 IW< [pencrypt]
545 270 root 0 IW< [pdecrypt]
546 366 root 0 IW< [ipv6_addrconf]
547 378 root 0 SW [ubi_bgt0d]
548 383 root 0 IW< [kworker/0:1H]
549 384 root 0 IW< [kworker/2:1H]
550 385 root 0 IW [kworker/2:2]
551 386 root 0 IW< [kworker/3:1H]
552 389 root 0 IW< [kworker/1:1H]
553 429 root 0 IW [kworker/0:2]
554 437 root 0 IW [kworker/1:2]
555 453 root 0 SW [scsi_eh_0]
556 454 root 0 IW< [scsi_tmf_0]
557 455 root 0 SW [usb-storage]
558 496 root 0 SW [ubifs_bgt0_1]
559 573 root 1220 S /sbin/ubusd
560 574 root 1220 S /bin/ash --login
561 591 root 1028 S /sbin/urngd
562 660 root 0 IW< [cfg80211]
563 1012 root 1248 S /sbin/logd -S 64
564 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
565 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
566 1168 root 1700 S /sbin/netifd
567 1204 root 1448 S /usr/sbin/odhcpd
568 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
569 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
570 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
571 1720 root 1212 R ps
572 root@OpenWrt:/etc# ping www.google.co
573 PING www.google.co (): 56 data bytes
574 64 bytes from : seq=0 ttl=52 time=4.718 ms
575 ^C
576 --- www.google.co ping statistics ---
577 1 packets transmitted, 1 packets received, 0% packet loss
578 round-trip min/avg/max = 4.718/4.718/4.718 ms
579 root@OpenWrt:/etc# ping www.google.com
580 PING www.google.com (): 56 data bytes
581 64 bytes from : seq=0 ttl=47 time=4.927 ms
582 64 bytes from : seq=1 ttl=47 time=4.687 ms
583 ^C
584 --- www.google.com ping statistics ---
585 2 packets transmitted, 2 packets received, 0% packet loss
586 round-trip min/avg/max = 4.687/4.807/4.927 ms
587 root@OpenWrt:/etc# opkg update
588 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
589 Updated list of available packages in /var/opkg-lists/openwrt_core
590 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
591 Signature check passed.
592 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
593 Updated list of available packages in /var/opkg-lists/openwrt_base
594 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
595 Signature check passed.
596 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
597 Updated list of available packages in /var/opkg-lists/openwrt_luci
598 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
599 Signature check passed.
600 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
601 Updated list of available packages in /var/opkg-lists/openwrt_packages
602 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
603 Signature check passed.
604 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
605 Updated list of available packages in /var/opkg-lists/openwrt_routing
606 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
607 Signature check passed.
608 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
609 Updated list of available packages in /var/opkg-lists/openwrt_telephony
610 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
611 Signature check passed.
612 root@OpenWrt:/etc# opkg install luci
613 Installing luci (git-19.241.65047-dffe9ca-1) to root...
614 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
615 Installing uhttpd (2019-08-17-6b03f960-3) to root...
616 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
617 Installing liblua5.1.5 (5.1.5-5) to root...
618 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
619 Installing lua (5.1.5-5) to root...
620 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
621 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
622 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
623 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
624 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
625 Installing rpcd (2019-06-05-89bfaa42-3) to root...
626 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
627 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
628 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
629 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
630 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
631 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
632 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
633 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
634 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
635 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
636 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
637 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
638 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
639 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
640 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
641 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
642 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
643 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
644 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
645 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
646 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
647 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
648 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
649 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
650 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
651 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
652 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
653 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
654 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
655 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
656 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
657 Installing rpcd-mod-rrdns (20170710) to root...
658 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
659 Configuring liblucihttp0.
660 Configuring luci-app-opkg.
661 Configuring rpcd.
662 Configuring liblua5.1.5.
663 Configuring luci-lib-ip.
664 Configuring libubus-lua.
665 Configuring libiwinfo-lua.
666 Configuring lua.
667 Configuring luci-lib-nixio.
668 Configuring luci-lib-jsonc.
669 Configuring liblucihttp-lua.
670 Configuring luci-base.
671 Configuring luci-mod-system.
672 Configuring luci-theme-bootstrap.
673 Configuring luci-mod-status.
674 Configuring luci-app-firewall.
675 Configuring luci-proto-ppp.
676 Configuring luci-mod-network.
677 Configuring luci-mod-admin-full.
678 Configuring luci-proto-ipv6.
679 Configuring uhttpd.
680 Configuring rpcd-mod-rrdns.
681 Configuring luci.
682 root@OpenWrt:/etc# df -h
Leon Poon 2.1 683 Filesystem Size Used Available Use% Mounted on
Leon Poon 11.1 684 /dev/root 2.8M 2.8M 0 100% /rom
685 tmpfs 123.5M 764.0K 122.8M 1% /tmp
686 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
687 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
Leon Poon 6.1 688 tmpfs 512.0K 0 512.0K 0% /dev
Leon Poon 11.1 689 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
690 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
691 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
692 [ 2075.984368] device wlan0 entered promiscuous mode
693 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
694 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
695 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
696 [ 2096.494533] device wlan0 left promiscuous mode
697 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
698 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
699 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
700 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
701 [ 2097.404922] device wlan0 entered promiscuous mode
702 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
703 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
704 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
705 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
706 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
707 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
708 [ 2117.964353] device wlan0 left promiscuous mode
709 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
710 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
711 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
712 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
713 [ 2118.804171] device wlan0 entered promiscuous mode
714 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
715 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
716 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
717 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
718 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
719 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
720 [ 2245.748473] device wlan0 left promiscuous mode
721 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
722 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
723 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
724 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
725 [ 2246.557667] device wlan0 entered promiscuous mode
726 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
727 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
728 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
729 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
730 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
731 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
732
733 root@OpenWrt:/etc#
734 root@OpenWrt:/etc# uci show wireless
735 wireless.radio0=wifi-device
736 wireless.radio0.type='mac80211'
737 wireless.radio0.channel='11'
738 wireless.radio0.hwmode='11g'
739 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
740 wireless.radio0.country='00'
741 wireless.radio0.legacy_rates='1'
742 wireless.radio0.htmode='HT20'
743 wireless.default_radio0=wifi-iface
744 wireless.default_radio0.device='radio0'
745 wireless.default_radio0.network='lan'
746 wireless.default_radio0.mode='ap'
747 wireless.default_radio0.encryption='psk2'
748 wireless.default_radio0.key='qwerty1234'
749 wireless.default_radio0.ssid='asdf'
750 wireless.radio1=wifi-device
751 wireless.radio1.type='mac80211'
752 wireless.radio1.channel='36'
753 wireless.radio1.hwmode='11a'
754 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
755 wireless.radio1.htmode='VHT80'
756 wireless.radio1.__toggle='Enable'
757 wireless.radio1.country='00'
758 wireless.radio1.legacy_rates='1'
759 wireless.default_radio1=wifi-iface
760 wireless.default_radio1.device='radio1'
761 wireless.default_radio1.network='lan'
762 wireless.default_radio1.mode='ap'
763 wireless.default_radio1.ssid='asdf'
764 wireless.default_radio1.encryption='psk2'
765 wireless.default_radio1.key='qwerty1234'
766 root@OpenWrt:/etc#
Leon Poon 6.1 767 {{/code}}
Leon Poon 12.1 768
769 Firmware:
770
771 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin