Wiki source code of Openwrt for Linksys EA8100

Version 43.1 by Leon Poon on 2021/04/12 12:12
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5
6 = 19.07.x =
7
8 Openwrt 19.07.7 for EA8100 is here!
9
10 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
11
12 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
13 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
14
15 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi! Follow these instructions:
16
17 1. Grab initramfs-factory.img from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]] and flash it via Linksys UI.
18 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. Do NOT configure yet! It's not ready.
19 1. Then grab squashfs-sysupgrade.bin from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin]] and flash it via LuCi
20 1. Wait for it to reboot. Now you can configure!
21
22 For kernel modules, replace with this in your opkg distfeeds.conf:
23
24 {{code language="none"}}
25 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
26 {{/code}}
27
28 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
29
30 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
31
32 {{warning}}
33 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
34 {{/warning}}
35
36 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
37
38 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
39
40 --How to flash if your router currently has stock Linksys firmware:--
41
42 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
43 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
44 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
45 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
46 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
47 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
48 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
49 1. --Run: ##opkg update##--
50 1. --Run: ##**opkg install luci**##--
51 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
52
53 = 18.x =
54
55 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
56
57 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
58 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
59
60 Note that sysupgrade to a newer image is not likely to work.
61
62 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
63 |[[image:1567332570723-651.png]]
64
65 Dmesg:
66
67 {{code language="plain"}}
68 3: Boot system code via Flash (default).
69 4: Entr boot command line interface.
70 7: Load Boot Loader code then write to Flash via Serial.
71 9: Load Boot Loader code then write to Flash via TFTP. 4
72 You choosed 2
73 0
74
75
76 2: System Load Linux Kernel then write to Flash via TFTP.
77 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
78 Please Input new ones /or Ctrl-C to discard
79 Input device IP () ==:
80 Input server IP () ==:
81 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
82 which kernel partition to update (1/2/3=both) (2) ==:3
83
84 NetTxPacket = 0x8FFE3200
85
86 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
87
88 NetLoop,call eth_halt !
89
90 NetLoop,call eth_init !
91 Trying Eth0 (10/100-M)
92
93 Waitting for RX_DMA_BUSY status Start... done
94
95
96 ETH_STATE_ACTIVE!!
97 TFTP from server ; our IP address is
98 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
99
100 TIMEOUT_COUNT=10,Load address: 0x80100000
101 Loading: Got ARP REPLY, set server/gtwy eth addr ()
102 Got it
103 #################################################################
104 #################################################################
105 #################################################################
106 #################################################################
107 #################################################################
108 #################################################################
109 #################################################################
110 #################################################################
111 #################################################################
112 #################################################################
113 #################################################################
114 #################################################################
115 #################################################################
116 #################################################################
117 #################################################################
118 #################################################################
119 #################################################################
120 ################################################
121 done
122 Bytes transferred = 5898496 (5a0100 hex)
123 LoadAddr=80100000 NetBootFileXferSize= 005a0100
124 ranand_erase: start:180000, len:20000
125 ..ranand_erase: start:1a0000, len:20000
126 ..ranand_erase: start:1c0000, len:20000
127 ...
128 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
129 Done!
130 ranand_erase: start:2980000, len:20000
131 ..ranand_erase: start:29a0000, len:20000
132 ..ranand_erase: start:29c0000, len:20000
133 ...
134 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
135 Done!
136 ## Booting image at bc180000 ...
137 Image Name: MIPS OpenWrt Linux-4.14.141
138 Image Type: MIPS Linux Kernel Image (lzma compressed)
139 Data Size: 2010110 Bytes = 1.9 MB
140 Load Address: 80001000
141 Entry Point: 80001000
142 ............................... Verifying Checksum ... OK
143 Uncompressing Kernel Image ... OK
144 No initrd
145 ## Transferring control to Linux (at address 80001000) ...
146 ## Giving linux memsize in MB, 256
147
148 Starting kernel ...
149
150 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
151 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
152 [ 0.000000] bootconsole [early0] enabled
153 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
154 [ 0.000000] MIPS: machine is Linksys EA8100
155 [ 0.000000] Determined physical RAM map:
156 [ 0.000000] memory: 10000000 @ 00000000 (usable)
157 [ 0.000000] Initrd not found or empty - disabling initrd
158 [ 0.000000] VPE topology {2,2} total 4
159 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
160 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
161 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
162 [ 0.000000] Zone ranges:
163 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
164 [ 0.000000] HighMem empty
165 [ 0.000000] Movable zone start for each node
166 [ 0.000000] Early memory node ranges
167 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
168 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
169 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
170 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
171 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
172 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
173 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
174 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
175 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
176 [ 0.000000] Writing ErrCtl register=0002c420
177 [ 0.000000] Readback ErrCtl register=0002c420
178 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
179 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
180 [ 0.000000] Hierarchical RCU implementation.
181 [ 0.000000] NR_IRQS: 256
182 [ 0.000000] CPU Clock: 880MHz
183 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
184 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
185 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
186 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
187 [ 0.073969] pid_max: default: 32768 minimum: 301
188 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
189 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
190 [ 0.094340] Hierarchical SRCU implementation.
191 [ 0.099495] smp: Bringing up secondary CPUs ...
192 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
193 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
194 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
195 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
196 [ 0.164211] Synchronize counters for CPU 1: done.
197 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
198 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
199 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
200 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
201 [ 0.255179] Synchronize counters for CPU 2: done.
202 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
203 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
204 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
205 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
206 [ 0.340367] Synchronize counters for CPU 3: done.
207 [ 0.370232] smp: Brought up 1 node, 4 CPUs
208 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
209 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
210 [ 0.394408] pinctrl core: initialized pinctrl subsystem
211 [ 0.401009] NET: Registered protocol family 16
212 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
213 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
214 [ 0.725598] ***** Xtal 40MHz *****
215 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
216 [ 0.734049] Port 0 N_FTS = 1b102800
217 [ 0.737517] Port 1 N_FTS = 1b102800
218 [ 0.740963] Port 2 N_FTS = 1b102800
219 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
220 [ 1.900719] -> 21007f2
221 [ 1.903123] PCIE0 enabled
222 [ 1.905712] PCIE1 enabled
223 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
224 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
225 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
226 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
227 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
228 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
229 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
230 [ 1.958178] PCI host bridge to bus 0000:00
231 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
232 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
233 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
234 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
235 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
236 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
237 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
238 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
239 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
240 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
241 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
242 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
243 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
244 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
245 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
246 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
247 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
248 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
249 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
250 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
251 [ 2.100582] clocksource: Switched to clocksource GIC
252 [ 2.107275] NET: Registered protocol family 2
253 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
254 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
255 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
256 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
257 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258 [ 2.144212] NET: Registered protocol family 1
259 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
260 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
261 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
262 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
263 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
264 [ 2.425815] random: fast init done
265 [ 2.430745] io scheduler noop registered
266 [ 2.434579] io scheduler deadline registered (default)
267 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
268 [ 2.448257] console [ttyS0] disabled
269 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
270 [ 2.460836] console [ttyS0] enabled
271 [ 2.460836] console [ttyS0] enabled
272 [ 2.467691] bootconsole [early0] disabled
273 [ 2.467691] bootconsole [early0] disabled
274 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
275 [ 2.484816] Enable NFI Clock
276 [ 2.487689] # MTK NAND # : Use HW ECC
277 [ 2.491382] Device not found, ID: c2f1
278 [ 2.495110] Not Support this Device!
279 [ 2.498835] chip_mode=00000001
280 [ 2.501893] Support this Device in MTK table! c2f1
281 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
282 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
283 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
284 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
285 [ 2.531927] Scanning device for bad blocks
286 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
287 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
288 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
289 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
290 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
291 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
292 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
293 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
294 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
295 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
296 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
297 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
298 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
299 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
300 [ 3.456742] [mtk_nand] probe successfully!
301 [ 3.461570] Signature matched and data read!
302 [ 3.465818] load_fact_bbt success 1023
303 [ 3.470276] libphy: Fixed MDIO Bus: probed
304 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
305 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
306 [ 3.556774] libphy: mdio: probed
307 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
308 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
309 [ 4.978262] NET: Registered protocol family 10
310 [ 4.984286] Segment Routing with IPv6
311 [ 4.988020] NET: Registered protocol family 17
312 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
313 [ 4.999621] UBI: auto-attach mtd9
314 [ 5.003015] ubi0: attaching mtd9
315 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
316 [ 5.039967] ubi0: scanning is finished
317 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
318 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
319 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
320 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
321 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
322 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
323 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
324 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
325 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
326 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
327 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
328 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
329 [ 5.165234] hctosys: unable to open rtc device (rtc0)
330 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
331 [ 5.195491] Freeing unused kernel memory: 1260K
332 [ 5.200022] This architecture does not have kernel memory protection.
333 [ 5.783744] init: Console is alive
334 [ 5.787378] init: - watchdog -
335 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
336 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
337 [ 6.591413] usbcore: registered new interface driver usbfs
338 [ 6.596966] usbcore: registered new interface driver hub
339 [ 6.602453] usbcore: registered new device driver usb
340 [ 6.615285] SCSI subsystem initialized
341 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
342 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
343 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
344 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
345 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
346 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
347 [ 6.676639] hub 1-0:1.0: USB hub found
348 [ 6.680467] hub 1-0:1.0: 2 ports detected
349 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
350 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
351 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
352 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
353 [ 6.713446] hub 2-0:1.0: USB hub found
354 [ 6.717275] hub 2-0:1.0: 1 port detected
355 [ 6.727313] usbcore: registered new interface driver usb-storage
356 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
357 [ 6.750877] init: - preinit -
358 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
359 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
360 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
361 [ 7.225920] scsi host0: usb-storage 2-1:1.0
362 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
363 Press the [f] key and hit [enter] to enter failsafe mode
364 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
365 [ 10.582466] UBIFS (ubi0:1): default file-system created
366 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
367 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
368 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
369 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
370 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
371 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
372 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
373 [ 10.756981] mount_root: switching to ubifs overlay
374 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
375 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
376 [ 10.876085] procd: - early -
377 [ 10.879061] procd: - watchdog -
378 [ 11.550737] procd: - watchdog -
379 [ 11.554202] procd: - ubus -
380 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
381 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
382 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
383 [ 11.625387] procd: - init -
384 Please press Enter to activate this console.
385 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
386 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
387 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
388 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
389 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
390 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
391 [ 12.127574] urngd: v1.0.0 started.
392 [ 12.145053] xt_time: kernel timezone is -0000
393 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
394 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
395 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
396 [ 12.241178]
397 [ 12.266469] random: crng init done
398 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
399 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
400 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
401 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
402 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
403 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
404 [ 20.161193]
405 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
406 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
407 [ 27.852570] PPP generic driver version 2.4.2
408 [ 27.858358] NET: Registered protocol family 24
409 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
410 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
411 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
412 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
413 [ 41.299522] device eth0.2 entered promiscuous mode
414 [ 41.304484] device eth0 entered promiscuous mode
415 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
416 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
417 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
418 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
419
420
421
422 BusyBox v1.31.0 () built-in shell (ash)
423
424 _______ ________ __
425 | |.-----.-----.-----.| | | |.----.| |_
426 | - || _ | -__| || | | || _|| _|
427 |_______|| __|_____|__|__||________||__| |____|
428 |__| W I R E L E S S F R E E D O M
429 -----------------------------------------------------
430 OpenWrt SNAPSHOT, r10942-9bebafcb5d
431 -----------------------------------------------------
432 === WARNING! =====================================
433 There is no root password defined on this device!
434 Use the "passwd" command to set up a new password
435 in order to prevent unauthorized SSH logins.
436 --------------------------------------------------
437 root@OpenWrt:/# ifconfig -a
438 br-lan Link encap:Ethernet HWaddr
439 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
440 inet6 addr: fde0:62db:5134::1/60 Scope:Global
441 inet6 addr: fe80::/64 Scope:Link
442 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
443 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
444 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
445 collisions:0 txqueuelen:1000
446 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
447
448 eth0 Link encap:Ethernet HWaddr
449 inet6 addr: fe80::/64 Scope:Link
450 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
451 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
452 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
453 collisions:0 txqueuelen:1000
454 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
455 Interrupt:21
456
457 eth0.1 Link encap:Ethernet HWaddr
458 inet6 addr: fe80::/64 Scope:Link
459 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
460 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
461 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
462 collisions:0 txqueuelen:1000
463 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
464
465 eth0.2 Link encap:Ethernet HWaddr
466 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
467 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
468 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
469 collisions:0 txqueuelen:1000
470 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
471
472 lo Link encap:Local Loopback
473 inet addr:127.0.0.1 Mask:255.0.0.0
474 inet6 addr: ::1/128 Scope:Host
475 UP LOOPBACK RUNNING MTU:65536 Metric:1
476 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
477 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
478 collisions:0 txqueuelen:1000
479 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
480
481 wlan0 Link encap:Ethernet HWaddr
482 BROADCAST MULTICAST MTU:1500 Metric:1
483 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
484 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
485 collisions:0 txqueuelen:1000
486 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
487
488 wlan1 Link encap:Ethernet HWaddr
489 BROADCAST MULTICAST MTU:1500 Metric:1
490 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
491 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
492 collisions:0 txqueuelen:1000
493 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
494
495 root@OpenWrt:/# ls -l
496 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
497 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
498 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
499 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
500 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
501 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
502 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
503 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
504 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
505 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
506 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
507 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
508 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
509 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
510 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
511 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
512 root@OpenWrt:/# ps
513 PID USER VSZ STAT COMMAND
514 1 root 1576 S /sbin/procd
515 2 root 0 SW [kthreadd]
516 3 root 0 IW [kworker/0:0]
517 4 root 0 IW< [kworker/0:0H]
518 5 root 0 IW [kworker/u8:0]
519 6 root 0 IW< [mm_percpu_wq]
520 7 root 0 SW [ksoftirqd/0]
521 8 root 0 IW [rcu_sched]
522 9 root 0 IW [rcu_bh]
523 10 root 0 SW [migration/0]
524 11 root 0 SW [cpuhp/0]
525 12 root 0 SW [cpuhp/1]
526 13 root 0 SW [migration/1]
527 14 root 0 SW [ksoftirqd/1]
528 16 root 0 IW< [kworker/1:0H]
529 17 root 0 SW [cpuhp/2]
530 18 root 0 SW [migration/2]
531 19 root 0 SW [ksoftirqd/2]
532 21 root 0 IW< [kworker/2:0H]
533 22 root 0 SW [cpuhp/3]
534 23 root 0 SW [migration/3]
535 24 root 0 SW [ksoftirqd/3]
536 25 root 0 IW [kworker/3:0]
537 26 root 0 IW< [kworker/3:0H]
538 27 root 0 IW< [netns]
539 41 root 0 IW [kworker/u8:3]
540 68 root 0 IW [kworker/3:1]
541 69 root 0 IW [kworker/2:1]
542 138 root 0 IW [kworker/1:1]
543 139 root 0 SW [oom_reaper]
544 140 root 0 IW< [writeback]
545 142 root 0 SW [kcompactd0]
546 143 root 0 IW< [crypto]
547 145 root 0 IW< [kblockd]
548 175 root 0 IW< [watchdogd]
549 199 root 0 SW [kswapd0]
550 268 root 0 IW< [pencrypt]
551 270 root 0 IW< [pdecrypt]
552 366 root 0 IW< [ipv6_addrconf]
553 378 root 0 SW [ubi_bgt0d]
554 383 root 0 IW< [kworker/0:1H]
555 384 root 0 IW< [kworker/2:1H]
556 385 root 0 IW [kworker/2:2]
557 386 root 0 IW< [kworker/3:1H]
558 389 root 0 IW< [kworker/1:1H]
559 429 root 0 IW [kworker/0:2]
560 437 root 0 IW [kworker/1:2]
561 453 root 0 SW [scsi_eh_0]
562 454 root 0 IW< [scsi_tmf_0]
563 455 root 0 SW [usb-storage]
564 496 root 0 SW [ubifs_bgt0_1]
565 573 root 1220 S /sbin/ubusd
566 574 root 1220 S /bin/ash --login
567 591 root 1028 S /sbin/urngd
568 660 root 0 IW< [cfg80211]
569 1012 root 1248 S /sbin/logd -S 64
570 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
571 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
572 1168 root 1700 S /sbin/netifd
573 1204 root 1448 S /usr/sbin/odhcpd
574 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
575 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
576 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
577 1720 root 1212 R ps
578 root@OpenWrt:/etc# ping www.google.co
579 PING www.google.co (): 56 data bytes
580 64 bytes from : seq=0 ttl=52 time=4.718 ms
581 ^C
582 --- www.google.co ping statistics ---
583 1 packets transmitted, 1 packets received, 0% packet loss
584 round-trip min/avg/max = 4.718/4.718/4.718 ms
585 root@OpenWrt:/etc# ping www.google.com
586 PING www.google.com (): 56 data bytes
587 64 bytes from : seq=0 ttl=47 time=4.927 ms
588 64 bytes from : seq=1 ttl=47 time=4.687 ms
589 ^C
590 --- www.google.com ping statistics ---
591 2 packets transmitted, 2 packets received, 0% packet loss
592 round-trip min/avg/max = 4.687/4.807/4.927 ms
593 root@OpenWrt:/etc# opkg update
594 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
595 Updated list of available packages in /var/opkg-lists/openwrt_core
596 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
597 Signature check passed.
598 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
599 Updated list of available packages in /var/opkg-lists/openwrt_base
600 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
601 Signature check passed.
602 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
603 Updated list of available packages in /var/opkg-lists/openwrt_luci
604 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
605 Signature check passed.
606 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
607 Updated list of available packages in /var/opkg-lists/openwrt_packages
608 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
609 Signature check passed.
610 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
611 Updated list of available packages in /var/opkg-lists/openwrt_routing
612 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
613 Signature check passed.
614 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
615 Updated list of available packages in /var/opkg-lists/openwrt_telephony
616 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
617 Signature check passed.
618 root@OpenWrt:/etc# opkg install luci
619 Installing luci (git-19.241.65047-dffe9ca-1) to root...
620 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
621 Installing uhttpd (2019-08-17-6b03f960-3) to root...
622 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
623 Installing liblua5.1.5 (5.1.5-5) to root...
624 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
625 Installing lua (5.1.5-5) to root...
626 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
627 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
628 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
629 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
630 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
631 Installing rpcd (2019-06-05-89bfaa42-3) to root...
632 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
633 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
634 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
635 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
636 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
637 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
638 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
639 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
640 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
641 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
642 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
643 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
644 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
645 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
646 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
647 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
648 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
649 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
650 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
651 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
652 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
653 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
654 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
655 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
656 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
657 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
658 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
659 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
660 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
661 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
662 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
663 Installing rpcd-mod-rrdns (20170710) to root...
664 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
665 Configuring liblucihttp0.
666 Configuring luci-app-opkg.
667 Configuring rpcd.
668 Configuring liblua5.1.5.
669 Configuring luci-lib-ip.
670 Configuring libubus-lua.
671 Configuring libiwinfo-lua.
672 Configuring lua.
673 Configuring luci-lib-nixio.
674 Configuring luci-lib-jsonc.
675 Configuring liblucihttp-lua.
676 Configuring luci-base.
677 Configuring luci-mod-system.
678 Configuring luci-theme-bootstrap.
679 Configuring luci-mod-status.
680 Configuring luci-app-firewall.
681 Configuring luci-proto-ppp.
682 Configuring luci-mod-network.
683 Configuring luci-mod-admin-full.
684 Configuring luci-proto-ipv6.
685 Configuring uhttpd.
686 Configuring rpcd-mod-rrdns.
687 Configuring luci.
688 root@OpenWrt:/etc# df -h
689 Filesystem Size Used Available Use% Mounted on
690 /dev/root 2.8M 2.8M 0 100% /rom
691 tmpfs 123.5M 764.0K 122.8M 1% /tmp
692 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
693 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
694 tmpfs 512.0K 0 512.0K 0% /dev
695 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
696 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
697 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
698 [ 2075.984368] device wlan0 entered promiscuous mode
699 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
700 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
701 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
702 [ 2096.494533] device wlan0 left promiscuous mode
703 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
704 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
705 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
706 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
707 [ 2097.404922] device wlan0 entered promiscuous mode
708 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
709 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
710 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
711 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
712 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
713 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
714 [ 2117.964353] device wlan0 left promiscuous mode
715 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
716 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
717 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
718 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
719 [ 2118.804171] device wlan0 entered promiscuous mode
720 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
721 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
722 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
723 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
724 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
725 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
726 [ 2245.748473] device wlan0 left promiscuous mode
727 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
728 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
729 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
730 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
731 [ 2246.557667] device wlan0 entered promiscuous mode
732 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
733 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
734 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
735 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
736 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
737 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
738
739 root@OpenWrt:/etc#
740 root@OpenWrt:/etc# uci show wireless
741 wireless.radio0=wifi-device
742 wireless.radio0.type='mac80211'
743 wireless.radio0.channel='11'
744 wireless.radio0.hwmode='11g'
745 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
746 wireless.radio0.country='00'
747 wireless.radio0.legacy_rates='1'
748 wireless.radio0.htmode='HT20'
749 wireless.default_radio0=wifi-iface
750 wireless.default_radio0.device='radio0'
751 wireless.default_radio0.network='lan'
752 wireless.default_radio0.mode='ap'
753 wireless.default_radio0.encryption='psk2'
754 wireless.default_radio0.key='qwerty1234'
755 wireless.default_radio0.ssid='asdf'
756 wireless.radio1=wifi-device
757 wireless.radio1.type='mac80211'
758 wireless.radio1.channel='36'
759 wireless.radio1.hwmode='11a'
760 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
761 wireless.radio1.htmode='VHT80'
762 wireless.radio1.__toggle='Enable'
763 wireless.radio1.country='00'
764 wireless.radio1.legacy_rates='1'
765 wireless.default_radio1=wifi-iface
766 wireless.default_radio1.device='radio1'
767 wireless.default_radio1.network='lan'
768 wireless.default_radio1.mode='ap'
769 wireless.default_radio1.ssid='asdf'
770 wireless.default_radio1.encryption='psk2'
771 wireless.default_radio1.key='qwerty1234'
772 root@OpenWrt:/etc#
773 {{/code}}
774
775 Firmware:
776
777 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin