Skip to Content

Wiki source code of Openwrt for Linksys EA8100

Version 45.1 by Leon Poon on 2021/04/13 11:53
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5
6 = 19.07.x =
7
8 Openwrt 19.07.7 for EA8100 is here!
9
10 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
11
12 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
13 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
14
15 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi! Follow these instructions:
16
17 1. Grab ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
18 1. Flash **##initramfs-factory.img##** via Linksys UI.
19 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. Do NOT configure yet! It's not ready.
20 1. Flash **##squashfs-sysupgrade.bin##** via LuCi
21 1. Wait for it to reboot. Now you can configure!
22
23 For kernel modules, replace with this in your ##/etc/opkg/distfeeds.conf##:
24
25 {{code language="none"}}
26 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
27 {{/code}}
28
29 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
30
31 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
32
33 {{warning}}
34 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
35 {{/warning}}
36
37 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
38
39 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
40
41 --How to flash if your router currently has stock Linksys firmware:--
42
43 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
44 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
45 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
46 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
47 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
48 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
49 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
50 1. --Run: ##opkg update##--
51 1. --Run: ##**opkg install luci**##--
52 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
53
54 = 18.x =
55
56 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
57
58 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
59 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
60
61 Note that sysupgrade to a newer image is not likely to work.
62
63 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
64 |[[image:1567332570723-651.png]]
65
66 Dmesg:
67
68 {{code language="plain"}}
69 3: Boot system code via Flash (default).
70 4: Entr boot command line interface.
71 7: Load Boot Loader code then write to Flash via Serial.
72 9: Load Boot Loader code then write to Flash via TFTP. 4
73 You choosed 2
74 0
75
76
77 2: System Load Linux Kernel then write to Flash via TFTP.
78 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
79 Please Input new ones /or Ctrl-C to discard
80 Input device IP () ==:
81 Input server IP () ==:
82 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
83 which kernel partition to update (1/2/3=both) (2) ==:3
84
85 NetTxPacket = 0x8FFE3200
86
87 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
88
89 NetLoop,call eth_halt !
90
91 NetLoop,call eth_init !
92 Trying Eth0 (10/100-M)
93
94 Waitting for RX_DMA_BUSY status Start... done
95
96
97 ETH_STATE_ACTIVE!!
98 TFTP from server ; our IP address is
99 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
100
101 TIMEOUT_COUNT=10,Load address: 0x80100000
102 Loading: Got ARP REPLY, set server/gtwy eth addr ()
103 Got it
104 #################################################################
105 #################################################################
106 #################################################################
107 #################################################################
108 #################################################################
109 #################################################################
110 #################################################################
111 #################################################################
112 #################################################################
113 #################################################################
114 #################################################################
115 #################################################################
116 #################################################################
117 #################################################################
118 #################################################################
119 #################################################################
120 #################################################################
121 ################################################
122 done
123 Bytes transferred = 5898496 (5a0100 hex)
124 LoadAddr=80100000 NetBootFileXferSize= 005a0100
125 ranand_erase: start:180000, len:20000
126 ..ranand_erase: start:1a0000, len:20000
127 ..ranand_erase: start:1c0000, len:20000
128 ...
129 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
130 Done!
131 ranand_erase: start:2980000, len:20000
132 ..ranand_erase: start:29a0000, len:20000
133 ..ranand_erase: start:29c0000, len:20000
134 ...
135 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
136 Done!
137 ## Booting image at bc180000 ...
138 Image Name: MIPS OpenWrt Linux-4.14.141
139 Image Type: MIPS Linux Kernel Image (lzma compressed)
140 Data Size: 2010110 Bytes = 1.9 MB
141 Load Address: 80001000
142 Entry Point: 80001000
143 ............................... Verifying Checksum ... OK
144 Uncompressing Kernel Image ... OK
145 No initrd
146 ## Transferring control to Linux (at address 80001000) ...
147 ## Giving linux memsize in MB, 256
148
149 Starting kernel ...
150
151 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
152 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
153 [ 0.000000] bootconsole [early0] enabled
154 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
155 [ 0.000000] MIPS: machine is Linksys EA8100
156 [ 0.000000] Determined physical RAM map:
157 [ 0.000000] memory: 10000000 @ 00000000 (usable)
158 [ 0.000000] Initrd not found or empty - disabling initrd
159 [ 0.000000] VPE topology {2,2} total 4
160 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
161 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
162 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
163 [ 0.000000] Zone ranges:
164 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
165 [ 0.000000] HighMem empty
166 [ 0.000000] Movable zone start for each node
167 [ 0.000000] Early memory node ranges
168 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
169 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
170 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
171 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
172 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
173 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
174 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
175 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
176 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
177 [ 0.000000] Writing ErrCtl register=0002c420
178 [ 0.000000] Readback ErrCtl register=0002c420
179 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
180 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
181 [ 0.000000] Hierarchical RCU implementation.
182 [ 0.000000] NR_IRQS: 256
183 [ 0.000000] CPU Clock: 880MHz
184 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
185 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
186 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
187 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
188 [ 0.073969] pid_max: default: 32768 minimum: 301
189 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
190 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
191 [ 0.094340] Hierarchical SRCU implementation.
192 [ 0.099495] smp: Bringing up secondary CPUs ...
193 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
194 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
195 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
196 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
197 [ 0.164211] Synchronize counters for CPU 1: done.
198 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
199 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
200 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
201 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
202 [ 0.255179] Synchronize counters for CPU 2: done.
203 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
204 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
205 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
206 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
207 [ 0.340367] Synchronize counters for CPU 3: done.
208 [ 0.370232] smp: Brought up 1 node, 4 CPUs
209 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
210 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
211 [ 0.394408] pinctrl core: initialized pinctrl subsystem
212 [ 0.401009] NET: Registered protocol family 16
213 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
214 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
215 [ 0.725598] ***** Xtal 40MHz *****
216 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
217 [ 0.734049] Port 0 N_FTS = 1b102800
218 [ 0.737517] Port 1 N_FTS = 1b102800
219 [ 0.740963] Port 2 N_FTS = 1b102800
220 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
221 [ 1.900719] -> 21007f2
222 [ 1.903123] PCIE0 enabled
223 [ 1.905712] PCIE1 enabled
224 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
225 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
226 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
227 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
228 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
229 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
230 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
231 [ 1.958178] PCI host bridge to bus 0000:00
232 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
233 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
234 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
235 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
236 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
237 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
238 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
239 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
240 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
241 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
242 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
243 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
244 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
245 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
246 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
247 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
248 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
249 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
250 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
251 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
252 [ 2.100582] clocksource: Switched to clocksource GIC
253 [ 2.107275] NET: Registered protocol family 2
254 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
255 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
256 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
257 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
258 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
259 [ 2.144212] NET: Registered protocol family 1
260 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
261 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
262 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
263 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
264 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
265 [ 2.425815] random: fast init done
266 [ 2.430745] io scheduler noop registered
267 [ 2.434579] io scheduler deadline registered (default)
268 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
269 [ 2.448257] console [ttyS0] disabled
270 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
271 [ 2.460836] console [ttyS0] enabled
272 [ 2.460836] console [ttyS0] enabled
273 [ 2.467691] bootconsole [early0] disabled
274 [ 2.467691] bootconsole [early0] disabled
275 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
276 [ 2.484816] Enable NFI Clock
277 [ 2.487689] # MTK NAND # : Use HW ECC
278 [ 2.491382] Device not found, ID: c2f1
279 [ 2.495110] Not Support this Device!
280 [ 2.498835] chip_mode=00000001
281 [ 2.501893] Support this Device in MTK table! c2f1
282 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
283 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
284 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
285 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
286 [ 2.531927] Scanning device for bad blocks
287 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
288 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
289 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
290 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
291 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
292 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
293 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
294 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
295 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
296 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
297 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
298 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
299 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
300 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
301 [ 3.456742] [mtk_nand] probe successfully!
302 [ 3.461570] Signature matched and data read!
303 [ 3.465818] load_fact_bbt success 1023
304 [ 3.470276] libphy: Fixed MDIO Bus: probed
305 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
306 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
307 [ 3.556774] libphy: mdio: probed
308 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
309 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
310 [ 4.978262] NET: Registered protocol family 10
311 [ 4.984286] Segment Routing with IPv6
312 [ 4.988020] NET: Registered protocol family 17
313 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
314 [ 4.999621] UBI: auto-attach mtd9
315 [ 5.003015] ubi0: attaching mtd9
316 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
317 [ 5.039967] ubi0: scanning is finished
318 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
319 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
320 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
321 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
322 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
323 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
324 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
325 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
326 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
327 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
328 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
329 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
330 [ 5.165234] hctosys: unable to open rtc device (rtc0)
331 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
332 [ 5.195491] Freeing unused kernel memory: 1260K
333 [ 5.200022] This architecture does not have kernel memory protection.
334 [ 5.783744] init: Console is alive
335 [ 5.787378] init: - watchdog -
336 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
337 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
338 [ 6.591413] usbcore: registered new interface driver usbfs
339 [ 6.596966] usbcore: registered new interface driver hub
340 [ 6.602453] usbcore: registered new device driver usb
341 [ 6.615285] SCSI subsystem initialized
342 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
343 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
344 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
345 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
346 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
347 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
348 [ 6.676639] hub 1-0:1.0: USB hub found
349 [ 6.680467] hub 1-0:1.0: 2 ports detected
350 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
351 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
352 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
353 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
354 [ 6.713446] hub 2-0:1.0: USB hub found
355 [ 6.717275] hub 2-0:1.0: 1 port detected
356 [ 6.727313] usbcore: registered new interface driver usb-storage
357 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
358 [ 6.750877] init: - preinit -
359 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
360 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
361 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
362 [ 7.225920] scsi host0: usb-storage 2-1:1.0
363 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
364 Press the [f] key and hit [enter] to enter failsafe mode
365 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
366 [ 10.582466] UBIFS (ubi0:1): default file-system created
367 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
368 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
369 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
370 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
371 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
372 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
373 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
374 [ 10.756981] mount_root: switching to ubifs overlay
375 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
376 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
377 [ 10.876085] procd: - early -
378 [ 10.879061] procd: - watchdog -
379 [ 11.550737] procd: - watchdog -
380 [ 11.554202] procd: - ubus -
381 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
382 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
383 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
384 [ 11.625387] procd: - init -
385 Please press Enter to activate this console.
386 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
387 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
388 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
389 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
390 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
391 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
392 [ 12.127574] urngd: v1.0.0 started.
393 [ 12.145053] xt_time: kernel timezone is -0000
394 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
395 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
396 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
397 [ 12.241178]
398 [ 12.266469] random: crng init done
399 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
400 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
401 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
402 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
403 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
404 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
405 [ 20.161193]
406 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
407 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
408 [ 27.852570] PPP generic driver version 2.4.2
409 [ 27.858358] NET: Registered protocol family 24
410 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
411 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
412 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
413 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
414 [ 41.299522] device eth0.2 entered promiscuous mode
415 [ 41.304484] device eth0 entered promiscuous mode
416 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
417 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
418 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
419 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
420
421
422
423 BusyBox v1.31.0 () built-in shell (ash)
424
425 _______ ________ __
426 | |.-----.-----.-----.| | | |.----.| |_
427 | - || _ | -__| || | | || _|| _|
428 |_______|| __|_____|__|__||________||__| |____|
429 |__| W I R E L E S S F R E E D O M
430 -----------------------------------------------------
431 OpenWrt SNAPSHOT, r10942-9bebafcb5d
432 -----------------------------------------------------
433 === WARNING! =====================================
434 There is no root password defined on this device!
435 Use the "passwd" command to set up a new password
436 in order to prevent unauthorized SSH logins.
437 --------------------------------------------------
438 root@OpenWrt:/# ifconfig -a
439 br-lan Link encap:Ethernet HWaddr
440 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
441 inet6 addr: fde0:62db:5134::1/60 Scope:Global
442 inet6 addr: fe80::/64 Scope:Link
443 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
444 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
445 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
446 collisions:0 txqueuelen:1000
447 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
448
449 eth0 Link encap:Ethernet HWaddr
450 inet6 addr: fe80::/64 Scope:Link
451 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
452 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
453 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
454 collisions:0 txqueuelen:1000
455 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
456 Interrupt:21
457
458 eth0.1 Link encap:Ethernet HWaddr
459 inet6 addr: fe80::/64 Scope:Link
460 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
461 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
462 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
463 collisions:0 txqueuelen:1000
464 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
465
466 eth0.2 Link encap:Ethernet HWaddr
467 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
468 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
469 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
470 collisions:0 txqueuelen:1000
471 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
472
473 lo Link encap:Local Loopback
474 inet addr:127.0.0.1 Mask:255.0.0.0
475 inet6 addr: ::1/128 Scope:Host
476 UP LOOPBACK RUNNING MTU:65536 Metric:1
477 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
478 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
479 collisions:0 txqueuelen:1000
480 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
481
482 wlan0 Link encap:Ethernet HWaddr
483 BROADCAST MULTICAST MTU:1500 Metric:1
484 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
485 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
486 collisions:0 txqueuelen:1000
487 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
488
489 wlan1 Link encap:Ethernet HWaddr
490 BROADCAST MULTICAST MTU:1500 Metric:1
491 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
492 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
493 collisions:0 txqueuelen:1000
494 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
495
496 root@OpenWrt:/# ls -l
497 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
498 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
499 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
500 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
501 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
502 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
503 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
504 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
505 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
506 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
507 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
508 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
509 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
510 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
511 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
512 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
513 root@OpenWrt:/# ps
514 PID USER VSZ STAT COMMAND
515 1 root 1576 S /sbin/procd
516 2 root 0 SW [kthreadd]
517 3 root 0 IW [kworker/0:0]
518 4 root 0 IW< [kworker/0:0H]
519 5 root 0 IW [kworker/u8:0]
520 6 root 0 IW< [mm_percpu_wq]
521 7 root 0 SW [ksoftirqd/0]
522 8 root 0 IW [rcu_sched]
523 9 root 0 IW [rcu_bh]
524 10 root 0 SW [migration/0]
525 11 root 0 SW [cpuhp/0]
526 12 root 0 SW [cpuhp/1]
527 13 root 0 SW [migration/1]
528 14 root 0 SW [ksoftirqd/1]
529 16 root 0 IW< [kworker/1:0H]
530 17 root 0 SW [cpuhp/2]
531 18 root 0 SW [migration/2]
532 19 root 0 SW [ksoftirqd/2]
533 21 root 0 IW< [kworker/2:0H]
534 22 root 0 SW [cpuhp/3]
535 23 root 0 SW [migration/3]
536 24 root 0 SW [ksoftirqd/3]
537 25 root 0 IW [kworker/3:0]
538 26 root 0 IW< [kworker/3:0H]
539 27 root 0 IW< [netns]
540 41 root 0 IW [kworker/u8:3]
541 68 root 0 IW [kworker/3:1]
542 69 root 0 IW [kworker/2:1]
543 138 root 0 IW [kworker/1:1]
544 139 root 0 SW [oom_reaper]
545 140 root 0 IW< [writeback]
546 142 root 0 SW [kcompactd0]
547 143 root 0 IW< [crypto]
548 145 root 0 IW< [kblockd]
549 175 root 0 IW< [watchdogd]
550 199 root 0 SW [kswapd0]
551 268 root 0 IW< [pencrypt]
552 270 root 0 IW< [pdecrypt]
553 366 root 0 IW< [ipv6_addrconf]
554 378 root 0 SW [ubi_bgt0d]
555 383 root 0 IW< [kworker/0:1H]
556 384 root 0 IW< [kworker/2:1H]
557 385 root 0 IW [kworker/2:2]
558 386 root 0 IW< [kworker/3:1H]
559 389 root 0 IW< [kworker/1:1H]
560 429 root 0 IW [kworker/0:2]
561 437 root 0 IW [kworker/1:2]
562 453 root 0 SW [scsi_eh_0]
563 454 root 0 IW< [scsi_tmf_0]
564 455 root 0 SW [usb-storage]
565 496 root 0 SW [ubifs_bgt0_1]
566 573 root 1220 S /sbin/ubusd
567 574 root 1220 S /bin/ash --login
568 591 root 1028 S /sbin/urngd
569 660 root 0 IW< [cfg80211]
570 1012 root 1248 S /sbin/logd -S 64
571 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
572 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
573 1168 root 1700 S /sbin/netifd
574 1204 root 1448 S /usr/sbin/odhcpd
575 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
576 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
577 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
578 1720 root 1212 R ps
579 root@OpenWrt:/etc# ping www.google.co
580 PING www.google.co (): 56 data bytes
581 64 bytes from : seq=0 ttl=52 time=4.718 ms
582 ^C
583 --- www.google.co ping statistics ---
584 1 packets transmitted, 1 packets received, 0% packet loss
585 round-trip min/avg/max = 4.718/4.718/4.718 ms
586 root@OpenWrt:/etc# ping www.google.com
587 PING www.google.com (): 56 data bytes
588 64 bytes from : seq=0 ttl=47 time=4.927 ms
589 64 bytes from : seq=1 ttl=47 time=4.687 ms
590 ^C
591 --- www.google.com ping statistics ---
592 2 packets transmitted, 2 packets received, 0% packet loss
593 round-trip min/avg/max = 4.687/4.807/4.927 ms
594 root@OpenWrt:/etc# opkg update
595 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
596 Updated list of available packages in /var/opkg-lists/openwrt_core
597 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
598 Signature check passed.
599 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
600 Updated list of available packages in /var/opkg-lists/openwrt_base
601 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
602 Signature check passed.
603 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
604 Updated list of available packages in /var/opkg-lists/openwrt_luci
605 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
606 Signature check passed.
607 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
608 Updated list of available packages in /var/opkg-lists/openwrt_packages
609 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
610 Signature check passed.
611 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
612 Updated list of available packages in /var/opkg-lists/openwrt_routing
613 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
614 Signature check passed.
615 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
616 Updated list of available packages in /var/opkg-lists/openwrt_telephony
617 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
618 Signature check passed.
619 root@OpenWrt:/etc# opkg install luci
620 Installing luci (git-19.241.65047-dffe9ca-1) to root...
621 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
622 Installing uhttpd (2019-08-17-6b03f960-3) to root...
623 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
624 Installing liblua5.1.5 (5.1.5-5) to root...
625 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
626 Installing lua (5.1.5-5) to root...
627 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
628 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
629 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
630 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
631 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
632 Installing rpcd (2019-06-05-89bfaa42-3) to root...
633 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
634 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
635 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
636 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
637 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
638 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
639 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
640 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
641 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
642 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
643 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
644 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
645 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
646 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
647 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
648 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
649 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
650 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
651 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
652 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
653 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
654 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
655 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
656 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
657 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
658 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
659 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
660 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
661 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
662 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
663 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
664 Installing rpcd-mod-rrdns (20170710) to root...
665 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
666 Configuring liblucihttp0.
667 Configuring luci-app-opkg.
668 Configuring rpcd.
669 Configuring liblua5.1.5.
670 Configuring luci-lib-ip.
671 Configuring libubus-lua.
672 Configuring libiwinfo-lua.
673 Configuring lua.
674 Configuring luci-lib-nixio.
675 Configuring luci-lib-jsonc.
676 Configuring liblucihttp-lua.
677 Configuring luci-base.
678 Configuring luci-mod-system.
679 Configuring luci-theme-bootstrap.
680 Configuring luci-mod-status.
681 Configuring luci-app-firewall.
682 Configuring luci-proto-ppp.
683 Configuring luci-mod-network.
684 Configuring luci-mod-admin-full.
685 Configuring luci-proto-ipv6.
686 Configuring uhttpd.
687 Configuring rpcd-mod-rrdns.
688 Configuring luci.
689 root@OpenWrt:/etc# df -h
690 Filesystem Size Used Available Use% Mounted on
691 /dev/root 2.8M 2.8M 0 100% /rom
692 tmpfs 123.5M 764.0K 122.8M 1% /tmp
693 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
694 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
695 tmpfs 512.0K 0 512.0K 0% /dev
696 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
697 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
698 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
699 [ 2075.984368] device wlan0 entered promiscuous mode
700 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
701 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
702 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
703 [ 2096.494533] device wlan0 left promiscuous mode
704 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
705 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
706 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
707 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
708 [ 2097.404922] device wlan0 entered promiscuous mode
709 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
710 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
711 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
712 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
713 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
714 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
715 [ 2117.964353] device wlan0 left promiscuous mode
716 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
717 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
718 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
719 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
720 [ 2118.804171] device wlan0 entered promiscuous mode
721 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
722 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
723 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
724 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
725 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
726 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
727 [ 2245.748473] device wlan0 left promiscuous mode
728 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
729 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
730 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
731 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
732 [ 2246.557667] device wlan0 entered promiscuous mode
733 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
734 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
735 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
736 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
737 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
738 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
739
740 root@OpenWrt:/etc#
741 root@OpenWrt:/etc# uci show wireless
742 wireless.radio0=wifi-device
743 wireless.radio0.type='mac80211'
744 wireless.radio0.channel='11'
745 wireless.radio0.hwmode='11g'
746 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
747 wireless.radio0.country='00'
748 wireless.radio0.legacy_rates='1'
749 wireless.radio0.htmode='HT20'
750 wireless.default_radio0=wifi-iface
751 wireless.default_radio0.device='radio0'
752 wireless.default_radio0.network='lan'
753 wireless.default_radio0.mode='ap'
754 wireless.default_radio0.encryption='psk2'
755 wireless.default_radio0.key='qwerty1234'
756 wireless.default_radio0.ssid='asdf'
757 wireless.radio1=wifi-device
758 wireless.radio1.type='mac80211'
759 wireless.radio1.channel='36'
760 wireless.radio1.hwmode='11a'
761 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
762 wireless.radio1.htmode='VHT80'
763 wireless.radio1.__toggle='Enable'
764 wireless.radio1.country='00'
765 wireless.radio1.legacy_rates='1'
766 wireless.default_radio1=wifi-iface
767 wireless.default_radio1.device='radio1'
768 wireless.default_radio1.network='lan'
769 wireless.default_radio1.mode='ap'
770 wireless.default_radio1.ssid='asdf'
771 wireless.default_radio1.encryption='psk2'
772 wireless.default_radio1.key='qwerty1234'
773 root@OpenWrt:/etc#
774 {{/code}}
775
776 Firmware:
777
778 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin