Wiki source code of Openwrt for Linksys EA8100

Version 47.1 by Leon Poon on 2021/04/13 11:58
Hide last authors
Leon Poon 1.1 1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
Leon Poon 17.1 3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
Leon Poon 1.1 4
Leon Poon 2.1 5
Leon Poon 13.1 6 = 19.07.x =
7
Leon Poon 43.1 8 Openwrt 19.07.7 for EA8100 is here!
Leon Poon 13.1 9
Leon Poon 43.1 10 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
Leon Poon 28.1 11
Leon Poon 32.1 12 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
13 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
14
Leon Poon 46.1 15 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi! Follow these instructions (always use a PC connected via wired ethernet):
Leon Poon 32.1 16
Leon Poon 46.1 17 1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
18 1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
Leon Poon 47.1 19 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
Leon Poon 45.1 20 1. Flash **##squashfs-sysupgrade.bin##** via LuCi
Leon Poon 40.1 21 1. Wait for it to reboot. Now you can configure!
Leon Poon 13.1 22
Leon Poon 44.1 23 For kernel modules, replace with this in your ##/etc/opkg/distfeeds.conf##:
Leon Poon 42.1 24
25 {{code language="none"}}
Leon Poon 43.1 26 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
Leon Poon 42.1 27 {{/code}}
28
Leon Poon 29.1 29 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
Leon Poon 15.1 30
Leon Poon 41.1 31 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
Leon Poon 13.1 32
Leon Poon 41.1 33 {{warning}}
34 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
35 {{/warning}}
36
Leon Poon 40.1 37 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
38
39 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
40
41 --How to flash if your router currently has stock Linksys firmware:--
42
43 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
44 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
45 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
46 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
47 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
48 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
49 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
50 1. --Run: ##opkg update##--
51 1. --Run: ##**opkg install luci**##--
52 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
53
Leon Poon 13.1 54 = 18.x =
55
Leon Poon 11.1 56 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
Leon Poon 2.1 57
Leon Poon 11.1 58 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
59 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
Leon Poon 6.1 60
Leon Poon 11.1 61 Note that sysupgrade to a newer image is not likely to work.
62
Leon Poon 12.1 63 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
Leon Poon 11.1 64 |[[image:1567332570723-651.png]]
65
Leon Poon 6.1 66 Dmesg:
67
68 {{code language="plain"}}
Leon Poon 11.1 69 3: Boot system code via Flash (default).
70 4: Entr boot command line interface.
71 7: Load Boot Loader code then write to Flash via Serial.
72 9: Load Boot Loader code then write to Flash via TFTP. 4
73 You choosed 2
74 0
Leon Poon 2.1 75
Leon Poon 11.1 76
77 2: System Load Linux Kernel then write to Flash via TFTP.
78 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
79 Please Input new ones /or Ctrl-C to discard
80 Input device IP () ==:
81 Input server IP () ==:
82 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
83 which kernel partition to update (1/2/3=both) (2) ==:3
84
85 NetTxPacket = 0x8FFE3200
86
87 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
88
89 NetLoop,call eth_halt !
90
91 NetLoop,call eth_init !
92 Trying Eth0 (10/100-M)
93
94 Waitting for RX_DMA_BUSY status Start... done
95
96
97 ETH_STATE_ACTIVE!!
98 TFTP from server ; our IP address is
99 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
100
101 TIMEOUT_COUNT=10,Load address: 0x80100000
102 Loading: Got ARP REPLY, set server/gtwy eth addr ()
103 Got it
104 #################################################################
105 #################################################################
106 #################################################################
107 #################################################################
108 #################################################################
109 #################################################################
110 #################################################################
111 #################################################################
112 #################################################################
113 #################################################################
114 #################################################################
115 #################################################################
116 #################################################################
117 #################################################################
118 #################################################################
119 #################################################################
120 #################################################################
121 ################################################
122 done
123 Bytes transferred = 5898496 (5a0100 hex)
124 LoadAddr=80100000 NetBootFileXferSize= 005a0100
125 ranand_erase: start:180000, len:20000
126 ..ranand_erase: start:1a0000, len:20000
127 ..ranand_erase: start:1c0000, len:20000
128 ...
129 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
130 Done!
131 ranand_erase: start:2980000, len:20000
132 ..ranand_erase: start:29a0000, len:20000
133 ..ranand_erase: start:29c0000, len:20000
134 ...
135 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
136 Done!
137 ## Booting image at bc180000 ...
138 Image Name: MIPS OpenWrt Linux-4.14.141
Leon Poon 2.1 139 Image Type: MIPS Linux Kernel Image (lzma compressed)
Leon Poon 11.1 140 Data Size: 2010110 Bytes = 1.9 MB
Leon Poon 2.1 141 Load Address: 80001000
142 Entry Point: 80001000
Leon Poon 11.1 143 ............................... Verifying Checksum ... OK
Leon Poon 2.1 144 Uncompressing Kernel Image ... OK
145 No initrd
Leon Poon 6.1 146 ## Transferring control to Linux (at address 80001000) ...
147 ## Giving linux memsize in MB, 256
Leon Poon 2.1 148
149 Starting kernel ...
150
Leon Poon 11.1 151 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
Leon Poon 2.1 152 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
153 [ 0.000000] bootconsole [early0] enabled
154 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
155 [ 0.000000] MIPS: machine is Linksys EA8100
156 [ 0.000000] Determined physical RAM map:
157 [ 0.000000] memory: 10000000 @ 00000000 (usable)
158 [ 0.000000] Initrd not found or empty - disabling initrd
159 [ 0.000000] VPE topology {2,2} total 4
160 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
161 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
162 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
163 [ 0.000000] Zone ranges:
164 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
165 [ 0.000000] HighMem empty
166 [ 0.000000] Movable zone start for each node
167 [ 0.000000] Early memory node ranges
168 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
169 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Leon Poon 11.1 170 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
171 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
172 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
Leon Poon 2.1 173 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
174 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
175 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
176 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Leon Poon 11.1 177 [ 0.000000] Writing ErrCtl register=0002c420
178 [ 0.000000] Readback ErrCtl register=0002c420
179 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
Leon Poon 2.1 180 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
181 [ 0.000000] Hierarchical RCU implementation.
182 [ 0.000000] NR_IRQS: 256
183 [ 0.000000] CPU Clock: 880MHz
184 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
185 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
186 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Leon Poon 11.1 187 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
188 [ 0.073969] pid_max: default: 32768 minimum: 301
189 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
190 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
191 [ 0.094340] Hierarchical SRCU implementation.
192 [ 0.099495] smp: Bringing up secondary CPUs ...
193 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
194 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
195 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
196 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
197 [ 0.164211] Synchronize counters for CPU 1: done.
198 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
199 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
200 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
201 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
202 [ 0.255179] Synchronize counters for CPU 2: done.
203 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
204 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
205 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
206 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
207 [ 0.340367] Synchronize counters for CPU 3: done.
208 [ 0.370232] smp: Brought up 1 node, 4 CPUs
209 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
210 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
211 [ 0.394408] pinctrl core: initialized pinctrl subsystem
212 [ 0.401009] NET: Registered protocol family 16
213 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
214 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
215 [ 0.725598] ***** Xtal 40MHz *****
216 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
217 [ 0.734049] Port 0 N_FTS = 1b102800
218 [ 0.737517] Port 1 N_FTS = 1b102800
219 [ 0.740963] Port 2 N_FTS = 1b102800
220 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
221 [ 1.900719] -> 21007f2
222 [ 1.903123] PCIE0 enabled
223 [ 1.905712] PCIE1 enabled
224 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
225 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
226 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
227 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
228 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
229 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
230 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
231 [ 1.958178] PCI host bridge to bus 0000:00
232 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
233 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
234 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
235 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
236 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
237 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
238 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
239 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
240 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
241 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
242 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
243 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
244 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
245 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
246 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
247 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
248 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
249 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
250 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
251 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
252 [ 2.100582] clocksource: Switched to clocksource GIC
253 [ 2.107275] NET: Registered protocol family 2
254 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
255 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
256 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
257 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
258 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
259 [ 2.144212] NET: Registered protocol family 1
260 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
261 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
262 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
263 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
264 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
265 [ 2.425815] random: fast init done
266 [ 2.430745] io scheduler noop registered
267 [ 2.434579] io scheduler deadline registered (default)
268 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
269 [ 2.448257] console [ttyS0] disabled
270 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
271 [ 2.460836] console [ttyS0] enabled
272 [ 2.460836] console [ttyS0] enabled
273 [ 2.467691] bootconsole [early0] disabled
274 [ 2.467691] bootconsole [early0] disabled
275 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
276 [ 2.484816] Enable NFI Clock
277 [ 2.487689] # MTK NAND # : Use HW ECC
278 [ 2.491382] Device not found, ID: c2f1
279 [ 2.495110] Not Support this Device!
280 [ 2.498835] chip_mode=00000001
281 [ 2.501893] Support this Device in MTK table! c2f1
282 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
283 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
284 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
285 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
286 [ 2.531927] Scanning device for bad blocks
287 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
288 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
289 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
290 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
291 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
292 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
293 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
294 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
295 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
296 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
297 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
298 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
299 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
300 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
301 [ 3.456742] [mtk_nand] probe successfully!
302 [ 3.461570] Signature matched and data read!
303 [ 3.465818] load_fact_bbt success 1023
304 [ 3.470276] libphy: Fixed MDIO Bus: probed
305 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
306 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
307 [ 3.556774] libphy: mdio: probed
308 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
309 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
310 [ 4.978262] NET: Registered protocol family 10
311 [ 4.984286] Segment Routing with IPv6
312 [ 4.988020] NET: Registered protocol family 17
313 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
314 [ 4.999621] UBI: auto-attach mtd9
315 [ 5.003015] ubi0: attaching mtd9
316 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
317 [ 5.039967] ubi0: scanning is finished
318 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
319 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
320 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
321 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
322 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
323 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
324 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
325 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
326 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
327 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
328 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
329 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
330 [ 5.165234] hctosys: unable to open rtc device (rtc0)
331 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
332 [ 5.195491] Freeing unused kernel memory: 1260K
333 [ 5.200022] This architecture does not have kernel memory protection.
334 [ 5.783744] init: Console is alive
335 [ 5.787378] init: - watchdog -
336 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
337 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
338 [ 6.591413] usbcore: registered new interface driver usbfs
339 [ 6.596966] usbcore: registered new interface driver hub
340 [ 6.602453] usbcore: registered new device driver usb
341 [ 6.615285] SCSI subsystem initialized
342 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
343 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
344 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
345 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
346 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
347 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
348 [ 6.676639] hub 1-0:1.0: USB hub found
349 [ 6.680467] hub 1-0:1.0: 2 ports detected
350 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
351 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
352 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
353 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
354 [ 6.713446] hub 2-0:1.0: USB hub found
355 [ 6.717275] hub 2-0:1.0: 1 port detected
356 [ 6.727313] usbcore: registered new interface driver usb-storage
357 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
358 [ 6.750877] init: - preinit -
359 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
360 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
361 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
362 [ 7.225920] scsi host0: usb-storage 2-1:1.0
363 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
Leon Poon 2.1 364 Press the [f] key and hit [enter] to enter failsafe mode
365 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Leon Poon 11.1 366 [ 10.582466] UBIFS (ubi0:1): default file-system created
367 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
368 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
369 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
370 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
371 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
372 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
373 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
374 [ 10.756981] mount_root: switching to ubifs overlay
375 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
376 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
377 [ 10.876085] procd: - early -
378 [ 10.879061] procd: - watchdog -
379 [ 11.550737] procd: - watchdog -
380 [ 11.554202] procd: - ubus -
381 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
382 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
383 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
384 [ 11.625387] procd: - init -
Leon Poon 2.1 385 Please press Enter to activate this console.
Leon Poon 11.1 386 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
387 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
388 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
389 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
390 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
391 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
392 [ 12.127574] urngd: v1.0.0 started.
393 [ 12.145053] xt_time: kernel timezone is -0000
394 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
395 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
396 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
397 [ 12.241178]
398 [ 12.266469] random: crng init done
399 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
400 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
401 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
402 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
403 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
404 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
405 [ 20.161193]
406 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
407 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
408 [ 27.852570] PPP generic driver version 2.4.2
409 [ 27.858358] NET: Registered protocol family 24
410 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
411 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
412 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
413 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
414 [ 41.299522] device eth0.2 entered promiscuous mode
415 [ 41.304484] device eth0 entered promiscuous mode
416 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
417 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
418 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
419 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Leon Poon 2.1 420
421
422
Leon Poon 11.1 423 BusyBox v1.31.0 () built-in shell (ash)
424
Leon Poon 6.1 425 _______ ________ __
426 | |.-----.-----.-----.| | | |.----.| |_
427 | - || _ | -__| || | | || _|| _|
428 |_______|| __|_____|__|__||________||__| |____|
429 |__| W I R E L E S S F R E E D O M
430 -----------------------------------------------------
Leon Poon 11.1 431 OpenWrt SNAPSHOT, r10942-9bebafcb5d
Leon Poon 6.1 432 -----------------------------------------------------
433 === WARNING! =====================================
Leon Poon 2.1 434 There is no root password defined on this device!
435 Use the "passwd" command to set up a new password
436 in order to prevent unauthorized SSH logins.
Leon Poon 6.1 437 --------------------------------------------------
Leon Poon 11.1 438 root@OpenWrt:/# ifconfig -a
439 br-lan Link encap:Ethernet HWaddr
440 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
441 inet6 addr: fde0:62db:5134::1/60 Scope:Global
442 inet6 addr: fe80::/64 Scope:Link
443 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
444 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
445 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
446 collisions:0 txqueuelen:1000
447 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
448
449 eth0 Link encap:Ethernet HWaddr
450 inet6 addr: fe80::/64 Scope:Link
451 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
452 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
453 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
454 collisions:0 txqueuelen:1000
455 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
456 Interrupt:21
457
458 eth0.1 Link encap:Ethernet HWaddr
459 inet6 addr: fe80::/64 Scope:Link
460 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
461 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
462 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
463 collisions:0 txqueuelen:1000
464 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
465
466 eth0.2 Link encap:Ethernet HWaddr
467 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
468 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
469 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
470 collisions:0 txqueuelen:1000
471 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
472
473 lo Link encap:Local Loopback
474 inet addr:127.0.0.1 Mask:255.0.0.0
475 inet6 addr: ::1/128 Scope:Host
476 UP LOOPBACK RUNNING MTU:65536 Metric:1
477 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
478 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
479 collisions:0 txqueuelen:1000
480 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
481
482 wlan0 Link encap:Ethernet HWaddr
483 BROADCAST MULTICAST MTU:1500 Metric:1
484 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
485 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
486 collisions:0 txqueuelen:1000
487 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
488
489 wlan1 Link encap:Ethernet HWaddr
490 BROADCAST MULTICAST MTU:1500 Metric:1
491 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
492 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
493 collisions:0 txqueuelen:1000
494 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
495
496 root@OpenWrt:/# ls -l
497 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
498 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
499 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
500 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
501 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
502 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
503 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
504 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
505 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
506 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
507 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
508 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
509 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
510 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
511 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
512 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
513 root@OpenWrt:/# ps
514 PID USER VSZ STAT COMMAND
515 1 root 1576 S /sbin/procd
516 2 root 0 SW [kthreadd]
517 3 root 0 IW [kworker/0:0]
518 4 root 0 IW< [kworker/0:0H]
519 5 root 0 IW [kworker/u8:0]
520 6 root 0 IW< [mm_percpu_wq]
521 7 root 0 SW [ksoftirqd/0]
522 8 root 0 IW [rcu_sched]
523 9 root 0 IW [rcu_bh]
524 10 root 0 SW [migration/0]
525 11 root 0 SW [cpuhp/0]
526 12 root 0 SW [cpuhp/1]
527 13 root 0 SW [migration/1]
528 14 root 0 SW [ksoftirqd/1]
529 16 root 0 IW< [kworker/1:0H]
530 17 root 0 SW [cpuhp/2]
531 18 root 0 SW [migration/2]
532 19 root 0 SW [ksoftirqd/2]
533 21 root 0 IW< [kworker/2:0H]
534 22 root 0 SW [cpuhp/3]
535 23 root 0 SW [migration/3]
536 24 root 0 SW [ksoftirqd/3]
537 25 root 0 IW [kworker/3:0]
538 26 root 0 IW< [kworker/3:0H]
539 27 root 0 IW< [netns]
540 41 root 0 IW [kworker/u8:3]
541 68 root 0 IW [kworker/3:1]
542 69 root 0 IW [kworker/2:1]
543 138 root 0 IW [kworker/1:1]
544 139 root 0 SW [oom_reaper]
545 140 root 0 IW< [writeback]
546 142 root 0 SW [kcompactd0]
547 143 root 0 IW< [crypto]
548 145 root 0 IW< [kblockd]
549 175 root 0 IW< [watchdogd]
550 199 root 0 SW [kswapd0]
551 268 root 0 IW< [pencrypt]
552 270 root 0 IW< [pdecrypt]
553 366 root 0 IW< [ipv6_addrconf]
554 378 root 0 SW [ubi_bgt0d]
555 383 root 0 IW< [kworker/0:1H]
556 384 root 0 IW< [kworker/2:1H]
557 385 root 0 IW [kworker/2:2]
558 386 root 0 IW< [kworker/3:1H]
559 389 root 0 IW< [kworker/1:1H]
560 429 root 0 IW [kworker/0:2]
561 437 root 0 IW [kworker/1:2]
562 453 root 0 SW [scsi_eh_0]
563 454 root 0 IW< [scsi_tmf_0]
564 455 root 0 SW [usb-storage]
565 496 root 0 SW [ubifs_bgt0_1]
566 573 root 1220 S /sbin/ubusd
567 574 root 1220 S /bin/ash --login
568 591 root 1028 S /sbin/urngd
569 660 root 0 IW< [cfg80211]
570 1012 root 1248 S /sbin/logd -S 64
571 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
572 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
573 1168 root 1700 S /sbin/netifd
574 1204 root 1448 S /usr/sbin/odhcpd
575 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
576 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
577 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
578 1720 root 1212 R ps
579 root@OpenWrt:/etc# ping www.google.co
580 PING www.google.co (): 56 data bytes
581 64 bytes from : seq=0 ttl=52 time=4.718 ms
582 ^C
583 --- www.google.co ping statistics ---
584 1 packets transmitted, 1 packets received, 0% packet loss
585 round-trip min/avg/max = 4.718/4.718/4.718 ms
586 root@OpenWrt:/etc# ping www.google.com
587 PING www.google.com (): 56 data bytes
588 64 bytes from : seq=0 ttl=47 time=4.927 ms
589 64 bytes from : seq=1 ttl=47 time=4.687 ms
590 ^C
591 --- www.google.com ping statistics ---
592 2 packets transmitted, 2 packets received, 0% packet loss
593 round-trip min/avg/max = 4.687/4.807/4.927 ms
594 root@OpenWrt:/etc# opkg update
595 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
596 Updated list of available packages in /var/opkg-lists/openwrt_core
597 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
598 Signature check passed.
599 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
600 Updated list of available packages in /var/opkg-lists/openwrt_base
601 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
602 Signature check passed.
603 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
604 Updated list of available packages in /var/opkg-lists/openwrt_luci
605 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
606 Signature check passed.
607 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
608 Updated list of available packages in /var/opkg-lists/openwrt_packages
609 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
610 Signature check passed.
611 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
612 Updated list of available packages in /var/opkg-lists/openwrt_routing
613 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
614 Signature check passed.
615 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
616 Updated list of available packages in /var/opkg-lists/openwrt_telephony
617 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
618 Signature check passed.
619 root@OpenWrt:/etc# opkg install luci
620 Installing luci (git-19.241.65047-dffe9ca-1) to root...
621 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
622 Installing uhttpd (2019-08-17-6b03f960-3) to root...
623 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
624 Installing liblua5.1.5 (5.1.5-5) to root...
625 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
626 Installing lua (5.1.5-5) to root...
627 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
628 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
629 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
630 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
631 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
632 Installing rpcd (2019-06-05-89bfaa42-3) to root...
633 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
634 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
635 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
636 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
637 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
638 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
639 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
640 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
641 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
642 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
643 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
644 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
645 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
646 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
647 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
648 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
649 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
650 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
651 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
652 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
653 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
654 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
655 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
656 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
657 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
658 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
659 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
660 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
661 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
662 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
663 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
664 Installing rpcd-mod-rrdns (20170710) to root...
665 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
666 Configuring liblucihttp0.
667 Configuring luci-app-opkg.
668 Configuring rpcd.
669 Configuring liblua5.1.5.
670 Configuring luci-lib-ip.
671 Configuring libubus-lua.
672 Configuring libiwinfo-lua.
673 Configuring lua.
674 Configuring luci-lib-nixio.
675 Configuring luci-lib-jsonc.
676 Configuring liblucihttp-lua.
677 Configuring luci-base.
678 Configuring luci-mod-system.
679 Configuring luci-theme-bootstrap.
680 Configuring luci-mod-status.
681 Configuring luci-app-firewall.
682 Configuring luci-proto-ppp.
683 Configuring luci-mod-network.
684 Configuring luci-mod-admin-full.
685 Configuring luci-proto-ipv6.
686 Configuring uhttpd.
687 Configuring rpcd-mod-rrdns.
688 Configuring luci.
689 root@OpenWrt:/etc# df -h
Leon Poon 2.1 690 Filesystem Size Used Available Use% Mounted on
Leon Poon 11.1 691 /dev/root 2.8M 2.8M 0 100% /rom
692 tmpfs 123.5M 764.0K 122.8M 1% /tmp
693 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
694 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
Leon Poon 6.1 695 tmpfs 512.0K 0 512.0K 0% /dev
Leon Poon 11.1 696 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
697 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
698 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
699 [ 2075.984368] device wlan0 entered promiscuous mode
700 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
701 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
702 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
703 [ 2096.494533] device wlan0 left promiscuous mode
704 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
705 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
706 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
707 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
708 [ 2097.404922] device wlan0 entered promiscuous mode
709 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
710 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
711 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
712 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
713 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
714 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
715 [ 2117.964353] device wlan0 left promiscuous mode
716 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
717 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
718 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
719 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
720 [ 2118.804171] device wlan0 entered promiscuous mode
721 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
722 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
723 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
724 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
725 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
726 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
727 [ 2245.748473] device wlan0 left promiscuous mode
728 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
729 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
730 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
731 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
732 [ 2246.557667] device wlan0 entered promiscuous mode
733 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
734 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
735 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
736 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
737 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
738 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
739
740 root@OpenWrt:/etc#
741 root@OpenWrt:/etc# uci show wireless
742 wireless.radio0=wifi-device
743 wireless.radio0.type='mac80211'
744 wireless.radio0.channel='11'
745 wireless.radio0.hwmode='11g'
746 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
747 wireless.radio0.country='00'
748 wireless.radio0.legacy_rates='1'
749 wireless.radio0.htmode='HT20'
750 wireless.default_radio0=wifi-iface
751 wireless.default_radio0.device='radio0'
752 wireless.default_radio0.network='lan'
753 wireless.default_radio0.mode='ap'
754 wireless.default_radio0.encryption='psk2'
755 wireless.default_radio0.key='qwerty1234'
756 wireless.default_radio0.ssid='asdf'
757 wireless.radio1=wifi-device
758 wireless.radio1.type='mac80211'
759 wireless.radio1.channel='36'
760 wireless.radio1.hwmode='11a'
761 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
762 wireless.radio1.htmode='VHT80'
763 wireless.radio1.__toggle='Enable'
764 wireless.radio1.country='00'
765 wireless.radio1.legacy_rates='1'
766 wireless.default_radio1=wifi-iface
767 wireless.default_radio1.device='radio1'
768 wireless.default_radio1.network='lan'
769 wireless.default_radio1.mode='ap'
770 wireless.default_radio1.ssid='asdf'
771 wireless.default_radio1.encryption='psk2'
772 wireless.default_radio1.key='qwerty1234'
773 root@OpenWrt:/etc#
Leon Poon 6.1 774 {{/code}}
Leon Poon 12.1 775
776 Firmware:
777
778 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin