Wiki source code of Openwrt for Linksys EA8100

Version 49.1 by Leon Poon on 2021/04/13 12:00
Hide last authors
Leon Poon 1.1 1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
Leon Poon 17.1 3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
Leon Poon 1.1 4
Leon Poon 2.1 5
Leon Poon 13.1 6 = 19.07.x =
7
Leon Poon 43.1 8 Openwrt 19.07.7 for EA8100 is here!
Leon Poon 13.1 9
Leon Poon 43.1 10 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
Leon Poon 28.1 11
Leon Poon 32.1 12 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
13 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
14
Leon Poon 49.1 15 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi! Follow these instructions:
Leon Poon 32.1 16
Leon Poon 49.1 17 (% class="box warningmessage" %)
18 (((
19 (always use a PC connected to the device via wired ethernet)
20 )))
21
Leon Poon 46.1 22 1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
23 1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
Leon Poon 47.1 24 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
Leon Poon 45.1 25 1. Flash **##squashfs-sysupgrade.bin##** via LuCi
Leon Poon 40.1 26 1. Wait for it to reboot. Now you can configure!
Leon Poon 13.1 27
Leon Poon 48.1 28 For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
Leon Poon 42.1 29
30 {{code language="none"}}
Leon Poon 43.1 31 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
Leon Poon 42.1 32 {{/code}}
33
Leon Poon 29.1 34 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
Leon Poon 15.1 35
Leon Poon 41.1 36 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
Leon Poon 13.1 37
Leon Poon 41.1 38 {{warning}}
39 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
40 {{/warning}}
41
Leon Poon 40.1 42 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
43
44 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
45
46 --How to flash if your router currently has stock Linksys firmware:--
47
48 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
49 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
50 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
51 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
52 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
53 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
54 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
55 1. --Run: ##opkg update##--
56 1. --Run: ##**opkg install luci**##--
57 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
58
Leon Poon 13.1 59 = 18.x =
60
Leon Poon 11.1 61 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
Leon Poon 2.1 62
Leon Poon 11.1 63 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
64 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
Leon Poon 6.1 65
Leon Poon 11.1 66 Note that sysupgrade to a newer image is not likely to work.
67
Leon Poon 12.1 68 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
Leon Poon 11.1 69 |[[image:1567332570723-651.png]]
70
Leon Poon 6.1 71 Dmesg:
72
73 {{code language="plain"}}
Leon Poon 11.1 74 3: Boot system code via Flash (default).
75 4: Entr boot command line interface.
76 7: Load Boot Loader code then write to Flash via Serial.
77 9: Load Boot Loader code then write to Flash via TFTP. 4
78 You choosed 2
79 0
Leon Poon 2.1 80
Leon Poon 11.1 81
82 2: System Load Linux Kernel then write to Flash via TFTP.
83 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
84 Please Input new ones /or Ctrl-C to discard
85 Input device IP () ==:
86 Input server IP () ==:
87 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
88 which kernel partition to update (1/2/3=both) (2) ==:3
89
90 NetTxPacket = 0x8FFE3200
91
92 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
93
94 NetLoop,call eth_halt !
95
96 NetLoop,call eth_init !
97 Trying Eth0 (10/100-M)
98
99 Waitting for RX_DMA_BUSY status Start... done
100
101
102 ETH_STATE_ACTIVE!!
103 TFTP from server ; our IP address is
104 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
105
106 TIMEOUT_COUNT=10,Load address: 0x80100000
107 Loading: Got ARP REPLY, set server/gtwy eth addr ()
108 Got it
109 #################################################################
110 #################################################################
111 #################################################################
112 #################################################################
113 #################################################################
114 #################################################################
115 #################################################################
116 #################################################################
117 #################################################################
118 #################################################################
119 #################################################################
120 #################################################################
121 #################################################################
122 #################################################################
123 #################################################################
124 #################################################################
125 #################################################################
126 ################################################
127 done
128 Bytes transferred = 5898496 (5a0100 hex)
129 LoadAddr=80100000 NetBootFileXferSize= 005a0100
130 ranand_erase: start:180000, len:20000
131 ..ranand_erase: start:1a0000, len:20000
132 ..ranand_erase: start:1c0000, len:20000
133 ...
134 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
135 Done!
136 ranand_erase: start:2980000, len:20000
137 ..ranand_erase: start:29a0000, len:20000
138 ..ranand_erase: start:29c0000, len:20000
139 ...
140 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
141 Done!
142 ## Booting image at bc180000 ...
143 Image Name: MIPS OpenWrt Linux-4.14.141
Leon Poon 2.1 144 Image Type: MIPS Linux Kernel Image (lzma compressed)
Leon Poon 11.1 145 Data Size: 2010110 Bytes = 1.9 MB
Leon Poon 2.1 146 Load Address: 80001000
147 Entry Point: 80001000
Leon Poon 11.1 148 ............................... Verifying Checksum ... OK
Leon Poon 2.1 149 Uncompressing Kernel Image ... OK
150 No initrd
Leon Poon 6.1 151 ## Transferring control to Linux (at address 80001000) ...
152 ## Giving linux memsize in MB, 256
Leon Poon 2.1 153
154 Starting kernel ...
155
Leon Poon 11.1 156 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
Leon Poon 2.1 157 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
158 [ 0.000000] bootconsole [early0] enabled
159 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
160 [ 0.000000] MIPS: machine is Linksys EA8100
161 [ 0.000000] Determined physical RAM map:
162 [ 0.000000] memory: 10000000 @ 00000000 (usable)
163 [ 0.000000] Initrd not found or empty - disabling initrd
164 [ 0.000000] VPE topology {2,2} total 4
165 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
166 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
167 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
168 [ 0.000000] Zone ranges:
169 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
170 [ 0.000000] HighMem empty
171 [ 0.000000] Movable zone start for each node
172 [ 0.000000] Early memory node ranges
173 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
174 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Leon Poon 11.1 175 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
176 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
177 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
Leon Poon 2.1 178 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
179 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
180 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
181 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Leon Poon 11.1 182 [ 0.000000] Writing ErrCtl register=0002c420
183 [ 0.000000] Readback ErrCtl register=0002c420
184 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
Leon Poon 2.1 185 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
186 [ 0.000000] Hierarchical RCU implementation.
187 [ 0.000000] NR_IRQS: 256
188 [ 0.000000] CPU Clock: 880MHz
189 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
190 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
191 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Leon Poon 11.1 192 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
193 [ 0.073969] pid_max: default: 32768 minimum: 301
194 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
195 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
196 [ 0.094340] Hierarchical SRCU implementation.
197 [ 0.099495] smp: Bringing up secondary CPUs ...
198 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
199 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
200 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
201 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
202 [ 0.164211] Synchronize counters for CPU 1: done.
203 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
204 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
205 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
206 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
207 [ 0.255179] Synchronize counters for CPU 2: done.
208 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
209 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
210 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
211 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
212 [ 0.340367] Synchronize counters for CPU 3: done.
213 [ 0.370232] smp: Brought up 1 node, 4 CPUs
214 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
215 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
216 [ 0.394408] pinctrl core: initialized pinctrl subsystem
217 [ 0.401009] NET: Registered protocol family 16
218 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
219 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
220 [ 0.725598] ***** Xtal 40MHz *****
221 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
222 [ 0.734049] Port 0 N_FTS = 1b102800
223 [ 0.737517] Port 1 N_FTS = 1b102800
224 [ 0.740963] Port 2 N_FTS = 1b102800
225 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
226 [ 1.900719] -> 21007f2
227 [ 1.903123] PCIE0 enabled
228 [ 1.905712] PCIE1 enabled
229 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
230 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
231 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
232 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
233 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
234 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
235 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
236 [ 1.958178] PCI host bridge to bus 0000:00
237 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
238 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
239 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
240 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
241 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
242 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
243 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
244 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
245 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
246 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
247 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
248 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
249 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
250 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
251 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
252 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
253 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
254 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
255 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
256 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
257 [ 2.100582] clocksource: Switched to clocksource GIC
258 [ 2.107275] NET: Registered protocol family 2
259 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
260 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
261 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
262 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
263 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
264 [ 2.144212] NET: Registered protocol family 1
265 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
266 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
267 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
268 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
269 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
270 [ 2.425815] random: fast init done
271 [ 2.430745] io scheduler noop registered
272 [ 2.434579] io scheduler deadline registered (default)
273 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
274 [ 2.448257] console [ttyS0] disabled
275 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
276 [ 2.460836] console [ttyS0] enabled
277 [ 2.460836] console [ttyS0] enabled
278 [ 2.467691] bootconsole [early0] disabled
279 [ 2.467691] bootconsole [early0] disabled
280 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
281 [ 2.484816] Enable NFI Clock
282 [ 2.487689] # MTK NAND # : Use HW ECC
283 [ 2.491382] Device not found, ID: c2f1
284 [ 2.495110] Not Support this Device!
285 [ 2.498835] chip_mode=00000001
286 [ 2.501893] Support this Device in MTK table! c2f1
287 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
288 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
289 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
290 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
291 [ 2.531927] Scanning device for bad blocks
292 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
293 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
294 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
295 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
296 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
297 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
298 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
299 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
300 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
301 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
302 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
303 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
304 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
305 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
306 [ 3.456742] [mtk_nand] probe successfully!
307 [ 3.461570] Signature matched and data read!
308 [ 3.465818] load_fact_bbt success 1023
309 [ 3.470276] libphy: Fixed MDIO Bus: probed
310 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
311 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
312 [ 3.556774] libphy: mdio: probed
313 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
314 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
315 [ 4.978262] NET: Registered protocol family 10
316 [ 4.984286] Segment Routing with IPv6
317 [ 4.988020] NET: Registered protocol family 17
318 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
319 [ 4.999621] UBI: auto-attach mtd9
320 [ 5.003015] ubi0: attaching mtd9
321 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
322 [ 5.039967] ubi0: scanning is finished
323 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
324 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
325 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
326 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
327 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
328 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
329 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
330 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
331 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
332 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
333 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
334 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
335 [ 5.165234] hctosys: unable to open rtc device (rtc0)
336 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
337 [ 5.195491] Freeing unused kernel memory: 1260K
338 [ 5.200022] This architecture does not have kernel memory protection.
339 [ 5.783744] init: Console is alive
340 [ 5.787378] init: - watchdog -
341 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
342 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
343 [ 6.591413] usbcore: registered new interface driver usbfs
344 [ 6.596966] usbcore: registered new interface driver hub
345 [ 6.602453] usbcore: registered new device driver usb
346 [ 6.615285] SCSI subsystem initialized
347 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
348 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
349 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
350 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
351 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
352 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
353 [ 6.676639] hub 1-0:1.0: USB hub found
354 [ 6.680467] hub 1-0:1.0: 2 ports detected
355 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
356 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
357 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
358 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
359 [ 6.713446] hub 2-0:1.0: USB hub found
360 [ 6.717275] hub 2-0:1.0: 1 port detected
361 [ 6.727313] usbcore: registered new interface driver usb-storage
362 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
363 [ 6.750877] init: - preinit -
364 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
365 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
366 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
367 [ 7.225920] scsi host0: usb-storage 2-1:1.0
368 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
Leon Poon 2.1 369 Press the [f] key and hit [enter] to enter failsafe mode
370 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Leon Poon 11.1 371 [ 10.582466] UBIFS (ubi0:1): default file-system created
372 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
373 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
374 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
375 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
376 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
377 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
378 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
379 [ 10.756981] mount_root: switching to ubifs overlay
380 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
381 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
382 [ 10.876085] procd: - early -
383 [ 10.879061] procd: - watchdog -
384 [ 11.550737] procd: - watchdog -
385 [ 11.554202] procd: - ubus -
386 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
387 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
388 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
389 [ 11.625387] procd: - init -
Leon Poon 2.1 390 Please press Enter to activate this console.
Leon Poon 11.1 391 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
392 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
393 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
394 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
395 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
396 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
397 [ 12.127574] urngd: v1.0.0 started.
398 [ 12.145053] xt_time: kernel timezone is -0000
399 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
400 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
401 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
402 [ 12.241178]
403 [ 12.266469] random: crng init done
404 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
405 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
406 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
407 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
408 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
409 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
410 [ 20.161193]
411 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
412 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
413 [ 27.852570] PPP generic driver version 2.4.2
414 [ 27.858358] NET: Registered protocol family 24
415 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
416 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
417 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
418 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
419 [ 41.299522] device eth0.2 entered promiscuous mode
420 [ 41.304484] device eth0 entered promiscuous mode
421 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
422 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
423 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
424 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Leon Poon 2.1 425
426
427
Leon Poon 11.1 428 BusyBox v1.31.0 () built-in shell (ash)
429
Leon Poon 6.1 430 _______ ________ __
431 | |.-----.-----.-----.| | | |.----.| |_
432 | - || _ | -__| || | | || _|| _|
433 |_______|| __|_____|__|__||________||__| |____|
434 |__| W I R E L E S S F R E E D O M
435 -----------------------------------------------------
Leon Poon 11.1 436 OpenWrt SNAPSHOT, r10942-9bebafcb5d
Leon Poon 6.1 437 -----------------------------------------------------
438 === WARNING! =====================================
Leon Poon 2.1 439 There is no root password defined on this device!
440 Use the "passwd" command to set up a new password
441 in order to prevent unauthorized SSH logins.
Leon Poon 6.1 442 --------------------------------------------------
Leon Poon 11.1 443 root@OpenWrt:/# ifconfig -a
444 br-lan Link encap:Ethernet HWaddr
445 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
446 inet6 addr: fde0:62db:5134::1/60 Scope:Global
447 inet6 addr: fe80::/64 Scope:Link
448 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
449 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
450 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
451 collisions:0 txqueuelen:1000
452 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
453
454 eth0 Link encap:Ethernet HWaddr
455 inet6 addr: fe80::/64 Scope:Link
456 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
457 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
458 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
459 collisions:0 txqueuelen:1000
460 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
461 Interrupt:21
462
463 eth0.1 Link encap:Ethernet HWaddr
464 inet6 addr: fe80::/64 Scope:Link
465 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
466 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
467 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
468 collisions:0 txqueuelen:1000
469 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
470
471 eth0.2 Link encap:Ethernet HWaddr
472 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
473 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
474 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
475 collisions:0 txqueuelen:1000
476 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
477
478 lo Link encap:Local Loopback
479 inet addr:127.0.0.1 Mask:255.0.0.0
480 inet6 addr: ::1/128 Scope:Host
481 UP LOOPBACK RUNNING MTU:65536 Metric:1
482 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
483 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
484 collisions:0 txqueuelen:1000
485 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
486
487 wlan0 Link encap:Ethernet HWaddr
488 BROADCAST MULTICAST MTU:1500 Metric:1
489 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
490 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
491 collisions:0 txqueuelen:1000
492 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
493
494 wlan1 Link encap:Ethernet HWaddr
495 BROADCAST MULTICAST MTU:1500 Metric:1
496 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
497 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
498 collisions:0 txqueuelen:1000
499 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
500
501 root@OpenWrt:/# ls -l
502 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
503 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
504 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
505 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
506 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
507 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
508 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
509 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
510 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
511 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
512 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
513 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
514 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
515 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
516 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
517 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
518 root@OpenWrt:/# ps
519 PID USER VSZ STAT COMMAND
520 1 root 1576 S /sbin/procd
521 2 root 0 SW [kthreadd]
522 3 root 0 IW [kworker/0:0]
523 4 root 0 IW< [kworker/0:0H]
524 5 root 0 IW [kworker/u8:0]
525 6 root 0 IW< [mm_percpu_wq]
526 7 root 0 SW [ksoftirqd/0]
527 8 root 0 IW [rcu_sched]
528 9 root 0 IW [rcu_bh]
529 10 root 0 SW [migration/0]
530 11 root 0 SW [cpuhp/0]
531 12 root 0 SW [cpuhp/1]
532 13 root 0 SW [migration/1]
533 14 root 0 SW [ksoftirqd/1]
534 16 root 0 IW< [kworker/1:0H]
535 17 root 0 SW [cpuhp/2]
536 18 root 0 SW [migration/2]
537 19 root 0 SW [ksoftirqd/2]
538 21 root 0 IW< [kworker/2:0H]
539 22 root 0 SW [cpuhp/3]
540 23 root 0 SW [migration/3]
541 24 root 0 SW [ksoftirqd/3]
542 25 root 0 IW [kworker/3:0]
543 26 root 0 IW< [kworker/3:0H]
544 27 root 0 IW< [netns]
545 41 root 0 IW [kworker/u8:3]
546 68 root 0 IW [kworker/3:1]
547 69 root 0 IW [kworker/2:1]
548 138 root 0 IW [kworker/1:1]
549 139 root 0 SW [oom_reaper]
550 140 root 0 IW< [writeback]
551 142 root 0 SW [kcompactd0]
552 143 root 0 IW< [crypto]
553 145 root 0 IW< [kblockd]
554 175 root 0 IW< [watchdogd]
555 199 root 0 SW [kswapd0]
556 268 root 0 IW< [pencrypt]
557 270 root 0 IW< [pdecrypt]
558 366 root 0 IW< [ipv6_addrconf]
559 378 root 0 SW [ubi_bgt0d]
560 383 root 0 IW< [kworker/0:1H]
561 384 root 0 IW< [kworker/2:1H]
562 385 root 0 IW [kworker/2:2]
563 386 root 0 IW< [kworker/3:1H]
564 389 root 0 IW< [kworker/1:1H]
565 429 root 0 IW [kworker/0:2]
566 437 root 0 IW [kworker/1:2]
567 453 root 0 SW [scsi_eh_0]
568 454 root 0 IW< [scsi_tmf_0]
569 455 root 0 SW [usb-storage]
570 496 root 0 SW [ubifs_bgt0_1]
571 573 root 1220 S /sbin/ubusd
572 574 root 1220 S /bin/ash --login
573 591 root 1028 S /sbin/urngd
574 660 root 0 IW< [cfg80211]
575 1012 root 1248 S /sbin/logd -S 64
576 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
577 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
578 1168 root 1700 S /sbin/netifd
579 1204 root 1448 S /usr/sbin/odhcpd
580 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
581 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
582 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
583 1720 root 1212 R ps
584 root@OpenWrt:/etc# ping www.google.co
585 PING www.google.co (): 56 data bytes
586 64 bytes from : seq=0 ttl=52 time=4.718 ms
587 ^C
588 --- www.google.co ping statistics ---
589 1 packets transmitted, 1 packets received, 0% packet loss
590 round-trip min/avg/max = 4.718/4.718/4.718 ms
591 root@OpenWrt:/etc# ping www.google.com
592 PING www.google.com (): 56 data bytes
593 64 bytes from : seq=0 ttl=47 time=4.927 ms
594 64 bytes from : seq=1 ttl=47 time=4.687 ms
595 ^C
596 --- www.google.com ping statistics ---
597 2 packets transmitted, 2 packets received, 0% packet loss
598 round-trip min/avg/max = 4.687/4.807/4.927 ms
599 root@OpenWrt:/etc# opkg update
600 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
601 Updated list of available packages in /var/opkg-lists/openwrt_core
602 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
603 Signature check passed.
604 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
605 Updated list of available packages in /var/opkg-lists/openwrt_base
606 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
607 Signature check passed.
608 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
609 Updated list of available packages in /var/opkg-lists/openwrt_luci
610 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
611 Signature check passed.
612 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
613 Updated list of available packages in /var/opkg-lists/openwrt_packages
614 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
615 Signature check passed.
616 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
617 Updated list of available packages in /var/opkg-lists/openwrt_routing
618 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
619 Signature check passed.
620 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
621 Updated list of available packages in /var/opkg-lists/openwrt_telephony
622 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
623 Signature check passed.
624 root@OpenWrt:/etc# opkg install luci
625 Installing luci (git-19.241.65047-dffe9ca-1) to root...
626 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
627 Installing uhttpd (2019-08-17-6b03f960-3) to root...
628 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
629 Installing liblua5.1.5 (5.1.5-5) to root...
630 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
631 Installing lua (5.1.5-5) to root...
632 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
633 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
634 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
635 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
636 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
637 Installing rpcd (2019-06-05-89bfaa42-3) to root...
638 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
639 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
640 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
641 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
642 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
643 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
644 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
645 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
646 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
647 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
648 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
649 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
650 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
651 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
652 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
653 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
654 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
655 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
656 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
657 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
658 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
659 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
660 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
661 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
662 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
663 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
664 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
665 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
666 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
667 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
668 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
669 Installing rpcd-mod-rrdns (20170710) to root...
670 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
671 Configuring liblucihttp0.
672 Configuring luci-app-opkg.
673 Configuring rpcd.
674 Configuring liblua5.1.5.
675 Configuring luci-lib-ip.
676 Configuring libubus-lua.
677 Configuring libiwinfo-lua.
678 Configuring lua.
679 Configuring luci-lib-nixio.
680 Configuring luci-lib-jsonc.
681 Configuring liblucihttp-lua.
682 Configuring luci-base.
683 Configuring luci-mod-system.
684 Configuring luci-theme-bootstrap.
685 Configuring luci-mod-status.
686 Configuring luci-app-firewall.
687 Configuring luci-proto-ppp.
688 Configuring luci-mod-network.
689 Configuring luci-mod-admin-full.
690 Configuring luci-proto-ipv6.
691 Configuring uhttpd.
692 Configuring rpcd-mod-rrdns.
693 Configuring luci.
694 root@OpenWrt:/etc# df -h
Leon Poon 2.1 695 Filesystem Size Used Available Use% Mounted on
Leon Poon 11.1 696 /dev/root 2.8M 2.8M 0 100% /rom
697 tmpfs 123.5M 764.0K 122.8M 1% /tmp
698 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
699 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
Leon Poon 6.1 700 tmpfs 512.0K 0 512.0K 0% /dev
Leon Poon 11.1 701 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
702 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
703 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
704 [ 2075.984368] device wlan0 entered promiscuous mode
705 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
706 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
707 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
708 [ 2096.494533] device wlan0 left promiscuous mode
709 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
710 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
711 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
712 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
713 [ 2097.404922] device wlan0 entered promiscuous mode
714 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
715 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
716 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
717 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
718 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
719 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
720 [ 2117.964353] device wlan0 left promiscuous mode
721 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
722 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
723 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
724 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
725 [ 2118.804171] device wlan0 entered promiscuous mode
726 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
727 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
728 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
729 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
730 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
731 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
732 [ 2245.748473] device wlan0 left promiscuous mode
733 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
734 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
735 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
736 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
737 [ 2246.557667] device wlan0 entered promiscuous mode
738 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
739 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
740 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
741 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
742 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
743 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
744
745 root@OpenWrt:/etc#
746 root@OpenWrt:/etc# uci show wireless
747 wireless.radio0=wifi-device
748 wireless.radio0.type='mac80211'
749 wireless.radio0.channel='11'
750 wireless.radio0.hwmode='11g'
751 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
752 wireless.radio0.country='00'
753 wireless.radio0.legacy_rates='1'
754 wireless.radio0.htmode='HT20'
755 wireless.default_radio0=wifi-iface
756 wireless.default_radio0.device='radio0'
757 wireless.default_radio0.network='lan'
758 wireless.default_radio0.mode='ap'
759 wireless.default_radio0.encryption='psk2'
760 wireless.default_radio0.key='qwerty1234'
761 wireless.default_radio0.ssid='asdf'
762 wireless.radio1=wifi-device
763 wireless.radio1.type='mac80211'
764 wireless.radio1.channel='36'
765 wireless.radio1.hwmode='11a'
766 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
767 wireless.radio1.htmode='VHT80'
768 wireless.radio1.__toggle='Enable'
769 wireless.radio1.country='00'
770 wireless.radio1.legacy_rates='1'
771 wireless.default_radio1=wifi-iface
772 wireless.default_radio1.device='radio1'
773 wireless.default_radio1.network='lan'
774 wireless.default_radio1.mode='ap'
775 wireless.default_radio1.ssid='asdf'
776 wireless.default_radio1.encryption='psk2'
777 wireless.default_radio1.key='qwerty1234'
778 root@OpenWrt:/etc#
Leon Poon 6.1 779 {{/code}}
Leon Poon 12.1 780
781 Firmware:
782
783 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin