Wiki source code of Openwrt for Linksys EA8100

Version 51.1 by Leon Poon on 2021/04/13 12:01
Hide last authors
Leon Poon 1.1 1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
Leon Poon 17.1 3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
Leon Poon 1.1 4
Leon Poon 2.1 5
Leon Poon 13.1 6 = 19.07.x =
7
Leon Poon 43.1 8 Openwrt 19.07.7 for EA8100 is here!
Leon Poon 13.1 9
Leon Poon 43.1 10 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
Leon Poon 28.1 11
Leon Poon 32.1 12 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
13 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
14
Leon Poon 51.1 15 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
Leon Poon 32.1 16
Leon Poon 49.1 17 (% class="box warningmessage" %)
18 (((
Leon Poon 51.1 19 Always use a PC connected to the device via wired ethernet for flashing firmwares.
Leon Poon 49.1 20 )))
21
Leon Poon 51.1 22 Follow these instructions:
23
Leon Poon 46.1 24 1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
25 1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
Leon Poon 47.1 26 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
Leon Poon 45.1 27 1. Flash **##squashfs-sysupgrade.bin##** via LuCi
Leon Poon 40.1 28 1. Wait for it to reboot. Now you can configure!
Leon Poon 13.1 29
Leon Poon 48.1 30 For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
Leon Poon 42.1 31
32 {{code language="none"}}
Leon Poon 43.1 33 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
Leon Poon 42.1 34 {{/code}}
35
Leon Poon 29.1 36 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
Leon Poon 15.1 37
Leon Poon 41.1 38 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
Leon Poon 13.1 39
Leon Poon 41.1 40 {{warning}}
41 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
42 {{/warning}}
43
Leon Poon 40.1 44 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
45
46 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
47
48 --How to flash if your router currently has stock Linksys firmware:--
49
50 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
51 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
52 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
53 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
54 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
55 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
56 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
57 1. --Run: ##opkg update##--
58 1. --Run: ##**opkg install luci**##--
59 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
60
Leon Poon 13.1 61 = 18.x =
62
Leon Poon 11.1 63 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
Leon Poon 2.1 64
Leon Poon 11.1 65 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
66 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
Leon Poon 6.1 67
Leon Poon 11.1 68 Note that sysupgrade to a newer image is not likely to work.
69
Leon Poon 12.1 70 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
Leon Poon 11.1 71 |[[image:1567332570723-651.png]]
72
Leon Poon 6.1 73 Dmesg:
74
75 {{code language="plain"}}
Leon Poon 11.1 76 3: Boot system code via Flash (default).
77 4: Entr boot command line interface.
78 7: Load Boot Loader code then write to Flash via Serial.
79 9: Load Boot Loader code then write to Flash via TFTP. 4
80 You choosed 2
81 0
Leon Poon 2.1 82
Leon Poon 11.1 83
84 2: System Load Linux Kernel then write to Flash via TFTP.
85 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
86 Please Input new ones /or Ctrl-C to discard
87 Input device IP () ==:
88 Input server IP () ==:
89 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
90 which kernel partition to update (1/2/3=both) (2) ==:3
91
92 NetTxPacket = 0x8FFE3200
93
94 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
95
96 NetLoop,call eth_halt !
97
98 NetLoop,call eth_init !
99 Trying Eth0 (10/100-M)
100
101 Waitting for RX_DMA_BUSY status Start... done
102
103
104 ETH_STATE_ACTIVE!!
105 TFTP from server ; our IP address is
106 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
107
108 TIMEOUT_COUNT=10,Load address: 0x80100000
109 Loading: Got ARP REPLY, set server/gtwy eth addr ()
110 Got it
111 #################################################################
112 #################################################################
113 #################################################################
114 #################################################################
115 #################################################################
116 #################################################################
117 #################################################################
118 #################################################################
119 #################################################################
120 #################################################################
121 #################################################################
122 #################################################################
123 #################################################################
124 #################################################################
125 #################################################################
126 #################################################################
127 #################################################################
128 ################################################
129 done
130 Bytes transferred = 5898496 (5a0100 hex)
131 LoadAddr=80100000 NetBootFileXferSize= 005a0100
132 ranand_erase: start:180000, len:20000
133 ..ranand_erase: start:1a0000, len:20000
134 ..ranand_erase: start:1c0000, len:20000
135 ...
136 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
137 Done!
138 ranand_erase: start:2980000, len:20000
139 ..ranand_erase: start:29a0000, len:20000
140 ..ranand_erase: start:29c0000, len:20000
141 ...
142 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
143 Done!
144 ## Booting image at bc180000 ...
145 Image Name: MIPS OpenWrt Linux-4.14.141
Leon Poon 2.1 146 Image Type: MIPS Linux Kernel Image (lzma compressed)
Leon Poon 11.1 147 Data Size: 2010110 Bytes = 1.9 MB
Leon Poon 2.1 148 Load Address: 80001000
149 Entry Point: 80001000
Leon Poon 11.1 150 ............................... Verifying Checksum ... OK
Leon Poon 2.1 151 Uncompressing Kernel Image ... OK
152 No initrd
Leon Poon 6.1 153 ## Transferring control to Linux (at address 80001000) ...
154 ## Giving linux memsize in MB, 256
Leon Poon 2.1 155
156 Starting kernel ...
157
Leon Poon 11.1 158 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
Leon Poon 2.1 159 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
160 [ 0.000000] bootconsole [early0] enabled
161 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
162 [ 0.000000] MIPS: machine is Linksys EA8100
163 [ 0.000000] Determined physical RAM map:
164 [ 0.000000] memory: 10000000 @ 00000000 (usable)
165 [ 0.000000] Initrd not found or empty - disabling initrd
166 [ 0.000000] VPE topology {2,2} total 4
167 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
168 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
169 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
170 [ 0.000000] Zone ranges:
171 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
172 [ 0.000000] HighMem empty
173 [ 0.000000] Movable zone start for each node
174 [ 0.000000] Early memory node ranges
175 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
176 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Leon Poon 11.1 177 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
178 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
179 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
Leon Poon 2.1 180 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
181 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
182 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
183 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Leon Poon 11.1 184 [ 0.000000] Writing ErrCtl register=0002c420
185 [ 0.000000] Readback ErrCtl register=0002c420
186 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
Leon Poon 2.1 187 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
188 [ 0.000000] Hierarchical RCU implementation.
189 [ 0.000000] NR_IRQS: 256
190 [ 0.000000] CPU Clock: 880MHz
191 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
192 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
193 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Leon Poon 11.1 194 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
195 [ 0.073969] pid_max: default: 32768 minimum: 301
196 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
197 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
198 [ 0.094340] Hierarchical SRCU implementation.
199 [ 0.099495] smp: Bringing up secondary CPUs ...
200 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
201 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
202 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
203 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
204 [ 0.164211] Synchronize counters for CPU 1: done.
205 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
206 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
207 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
208 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
209 [ 0.255179] Synchronize counters for CPU 2: done.
210 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
211 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
212 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
213 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
214 [ 0.340367] Synchronize counters for CPU 3: done.
215 [ 0.370232] smp: Brought up 1 node, 4 CPUs
216 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
217 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
218 [ 0.394408] pinctrl core: initialized pinctrl subsystem
219 [ 0.401009] NET: Registered protocol family 16
220 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
221 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
222 [ 0.725598] ***** Xtal 40MHz *****
223 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
224 [ 0.734049] Port 0 N_FTS = 1b102800
225 [ 0.737517] Port 1 N_FTS = 1b102800
226 [ 0.740963] Port 2 N_FTS = 1b102800
227 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
228 [ 1.900719] -> 21007f2
229 [ 1.903123] PCIE0 enabled
230 [ 1.905712] PCIE1 enabled
231 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
232 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
233 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
234 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
235 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
236 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
237 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
238 [ 1.958178] PCI host bridge to bus 0000:00
239 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
240 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
241 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
242 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
243 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
244 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
245 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
246 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
247 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
248 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
249 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
250 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
251 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
252 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
253 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
254 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
255 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
256 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
257 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
258 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
259 [ 2.100582] clocksource: Switched to clocksource GIC
260 [ 2.107275] NET: Registered protocol family 2
261 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
262 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
263 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
264 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
265 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
266 [ 2.144212] NET: Registered protocol family 1
267 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
268 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
269 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
270 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
271 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
272 [ 2.425815] random: fast init done
273 [ 2.430745] io scheduler noop registered
274 [ 2.434579] io scheduler deadline registered (default)
275 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
276 [ 2.448257] console [ttyS0] disabled
277 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
278 [ 2.460836] console [ttyS0] enabled
279 [ 2.460836] console [ttyS0] enabled
280 [ 2.467691] bootconsole [early0] disabled
281 [ 2.467691] bootconsole [early0] disabled
282 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
283 [ 2.484816] Enable NFI Clock
284 [ 2.487689] # MTK NAND # : Use HW ECC
285 [ 2.491382] Device not found, ID: c2f1
286 [ 2.495110] Not Support this Device!
287 [ 2.498835] chip_mode=00000001
288 [ 2.501893] Support this Device in MTK table! c2f1
289 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
290 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
291 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
292 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
293 [ 2.531927] Scanning device for bad blocks
294 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
295 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
296 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
297 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
298 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
299 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
300 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
301 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
302 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
303 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
304 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
305 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
306 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
307 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
308 [ 3.456742] [mtk_nand] probe successfully!
309 [ 3.461570] Signature matched and data read!
310 [ 3.465818] load_fact_bbt success 1023
311 [ 3.470276] libphy: Fixed MDIO Bus: probed
312 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
313 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
314 [ 3.556774] libphy: mdio: probed
315 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
316 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
317 [ 4.978262] NET: Registered protocol family 10
318 [ 4.984286] Segment Routing with IPv6
319 [ 4.988020] NET: Registered protocol family 17
320 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
321 [ 4.999621] UBI: auto-attach mtd9
322 [ 5.003015] ubi0: attaching mtd9
323 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
324 [ 5.039967] ubi0: scanning is finished
325 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
326 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
327 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
328 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
329 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
330 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
331 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
332 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
333 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
334 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
335 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
336 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
337 [ 5.165234] hctosys: unable to open rtc device (rtc0)
338 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
339 [ 5.195491] Freeing unused kernel memory: 1260K
340 [ 5.200022] This architecture does not have kernel memory protection.
341 [ 5.783744] init: Console is alive
342 [ 5.787378] init: - watchdog -
343 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
344 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
345 [ 6.591413] usbcore: registered new interface driver usbfs
346 [ 6.596966] usbcore: registered new interface driver hub
347 [ 6.602453] usbcore: registered new device driver usb
348 [ 6.615285] SCSI subsystem initialized
349 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
350 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
351 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
352 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
353 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
354 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
355 [ 6.676639] hub 1-0:1.0: USB hub found
356 [ 6.680467] hub 1-0:1.0: 2 ports detected
357 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
358 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
359 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
360 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
361 [ 6.713446] hub 2-0:1.0: USB hub found
362 [ 6.717275] hub 2-0:1.0: 1 port detected
363 [ 6.727313] usbcore: registered new interface driver usb-storage
364 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
365 [ 6.750877] init: - preinit -
366 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
367 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
368 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
369 [ 7.225920] scsi host0: usb-storage 2-1:1.0
370 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
Leon Poon 2.1 371 Press the [f] key and hit [enter] to enter failsafe mode
372 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Leon Poon 11.1 373 [ 10.582466] UBIFS (ubi0:1): default file-system created
374 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
375 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
376 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
377 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
378 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
379 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
380 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
381 [ 10.756981] mount_root: switching to ubifs overlay
382 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
383 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
384 [ 10.876085] procd: - early -
385 [ 10.879061] procd: - watchdog -
386 [ 11.550737] procd: - watchdog -
387 [ 11.554202] procd: - ubus -
388 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
389 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
390 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
391 [ 11.625387] procd: - init -
Leon Poon 2.1 392 Please press Enter to activate this console.
Leon Poon 11.1 393 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
394 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
395 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
396 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
397 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
398 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
399 [ 12.127574] urngd: v1.0.0 started.
400 [ 12.145053] xt_time: kernel timezone is -0000
401 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
402 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
403 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
404 [ 12.241178]
405 [ 12.266469] random: crng init done
406 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
407 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
408 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
409 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
410 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
411 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
412 [ 20.161193]
413 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
414 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
415 [ 27.852570] PPP generic driver version 2.4.2
416 [ 27.858358] NET: Registered protocol family 24
417 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
418 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
419 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
420 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
421 [ 41.299522] device eth0.2 entered promiscuous mode
422 [ 41.304484] device eth0 entered promiscuous mode
423 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
424 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
425 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
426 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Leon Poon 2.1 427
428
429
Leon Poon 11.1 430 BusyBox v1.31.0 () built-in shell (ash)
431
Leon Poon 6.1 432 _______ ________ __
433 | |.-----.-----.-----.| | | |.----.| |_
434 | - || _ | -__| || | | || _|| _|
435 |_______|| __|_____|__|__||________||__| |____|
436 |__| W I R E L E S S F R E E D O M
437 -----------------------------------------------------
Leon Poon 11.1 438 OpenWrt SNAPSHOT, r10942-9bebafcb5d
Leon Poon 6.1 439 -----------------------------------------------------
440 === WARNING! =====================================
Leon Poon 2.1 441 There is no root password defined on this device!
442 Use the "passwd" command to set up a new password
443 in order to prevent unauthorized SSH logins.
Leon Poon 6.1 444 --------------------------------------------------
Leon Poon 11.1 445 root@OpenWrt:/# ifconfig -a
446 br-lan Link encap:Ethernet HWaddr
447 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
448 inet6 addr: fde0:62db:5134::1/60 Scope:Global
449 inet6 addr: fe80::/64 Scope:Link
450 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
451 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
452 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
453 collisions:0 txqueuelen:1000
454 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
455
456 eth0 Link encap:Ethernet HWaddr
457 inet6 addr: fe80::/64 Scope:Link
458 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
459 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
460 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
461 collisions:0 txqueuelen:1000
462 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
463 Interrupt:21
464
465 eth0.1 Link encap:Ethernet HWaddr
466 inet6 addr: fe80::/64 Scope:Link
467 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
468 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
469 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
470 collisions:0 txqueuelen:1000
471 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
472
473 eth0.2 Link encap:Ethernet HWaddr
474 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
475 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
476 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
477 collisions:0 txqueuelen:1000
478 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
479
480 lo Link encap:Local Loopback
481 inet addr:127.0.0.1 Mask:255.0.0.0
482 inet6 addr: ::1/128 Scope:Host
483 UP LOOPBACK RUNNING MTU:65536 Metric:1
484 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
485 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
486 collisions:0 txqueuelen:1000
487 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
488
489 wlan0 Link encap:Ethernet HWaddr
490 BROADCAST MULTICAST MTU:1500 Metric:1
491 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
492 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
493 collisions:0 txqueuelen:1000
494 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
495
496 wlan1 Link encap:Ethernet HWaddr
497 BROADCAST MULTICAST MTU:1500 Metric:1
498 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
499 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
500 collisions:0 txqueuelen:1000
501 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
502
503 root@OpenWrt:/# ls -l
504 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
505 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
506 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
507 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
508 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
509 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
510 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
511 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
512 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
513 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
514 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
515 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
516 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
517 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
518 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
519 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
520 root@OpenWrt:/# ps
521 PID USER VSZ STAT COMMAND
522 1 root 1576 S /sbin/procd
523 2 root 0 SW [kthreadd]
524 3 root 0 IW [kworker/0:0]
525 4 root 0 IW< [kworker/0:0H]
526 5 root 0 IW [kworker/u8:0]
527 6 root 0 IW< [mm_percpu_wq]
528 7 root 0 SW [ksoftirqd/0]
529 8 root 0 IW [rcu_sched]
530 9 root 0 IW [rcu_bh]
531 10 root 0 SW [migration/0]
532 11 root 0 SW [cpuhp/0]
533 12 root 0 SW [cpuhp/1]
534 13 root 0 SW [migration/1]
535 14 root 0 SW [ksoftirqd/1]
536 16 root 0 IW< [kworker/1:0H]
537 17 root 0 SW [cpuhp/2]
538 18 root 0 SW [migration/2]
539 19 root 0 SW [ksoftirqd/2]
540 21 root 0 IW< [kworker/2:0H]
541 22 root 0 SW [cpuhp/3]
542 23 root 0 SW [migration/3]
543 24 root 0 SW [ksoftirqd/3]
544 25 root 0 IW [kworker/3:0]
545 26 root 0 IW< [kworker/3:0H]
546 27 root 0 IW< [netns]
547 41 root 0 IW [kworker/u8:3]
548 68 root 0 IW [kworker/3:1]
549 69 root 0 IW [kworker/2:1]
550 138 root 0 IW [kworker/1:1]
551 139 root 0 SW [oom_reaper]
552 140 root 0 IW< [writeback]
553 142 root 0 SW [kcompactd0]
554 143 root 0 IW< [crypto]
555 145 root 0 IW< [kblockd]
556 175 root 0 IW< [watchdogd]
557 199 root 0 SW [kswapd0]
558 268 root 0 IW< [pencrypt]
559 270 root 0 IW< [pdecrypt]
560 366 root 0 IW< [ipv6_addrconf]
561 378 root 0 SW [ubi_bgt0d]
562 383 root 0 IW< [kworker/0:1H]
563 384 root 0 IW< [kworker/2:1H]
564 385 root 0 IW [kworker/2:2]
565 386 root 0 IW< [kworker/3:1H]
566 389 root 0 IW< [kworker/1:1H]
567 429 root 0 IW [kworker/0:2]
568 437 root 0 IW [kworker/1:2]
569 453 root 0 SW [scsi_eh_0]
570 454 root 0 IW< [scsi_tmf_0]
571 455 root 0 SW [usb-storage]
572 496 root 0 SW [ubifs_bgt0_1]
573 573 root 1220 S /sbin/ubusd
574 574 root 1220 S /bin/ash --login
575 591 root 1028 S /sbin/urngd
576 660 root 0 IW< [cfg80211]
577 1012 root 1248 S /sbin/logd -S 64
578 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
579 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
580 1168 root 1700 S /sbin/netifd
581 1204 root 1448 S /usr/sbin/odhcpd
582 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
583 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
584 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
585 1720 root 1212 R ps
586 root@OpenWrt:/etc# ping www.google.co
587 PING www.google.co (): 56 data bytes
588 64 bytes from : seq=0 ttl=52 time=4.718 ms
589 ^C
590 --- www.google.co ping statistics ---
591 1 packets transmitted, 1 packets received, 0% packet loss
592 round-trip min/avg/max = 4.718/4.718/4.718 ms
593 root@OpenWrt:/etc# ping www.google.com
594 PING www.google.com (): 56 data bytes
595 64 bytes from : seq=0 ttl=47 time=4.927 ms
596 64 bytes from : seq=1 ttl=47 time=4.687 ms
597 ^C
598 --- www.google.com ping statistics ---
599 2 packets transmitted, 2 packets received, 0% packet loss
600 round-trip min/avg/max = 4.687/4.807/4.927 ms
601 root@OpenWrt:/etc# opkg update
602 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
603 Updated list of available packages in /var/opkg-lists/openwrt_core
604 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
605 Signature check passed.
606 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
607 Updated list of available packages in /var/opkg-lists/openwrt_base
608 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
609 Signature check passed.
610 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
611 Updated list of available packages in /var/opkg-lists/openwrt_luci
612 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
613 Signature check passed.
614 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
615 Updated list of available packages in /var/opkg-lists/openwrt_packages
616 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
617 Signature check passed.
618 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
619 Updated list of available packages in /var/opkg-lists/openwrt_routing
620 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
621 Signature check passed.
622 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
623 Updated list of available packages in /var/opkg-lists/openwrt_telephony
624 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
625 Signature check passed.
626 root@OpenWrt:/etc# opkg install luci
627 Installing luci (git-19.241.65047-dffe9ca-1) to root...
628 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
629 Installing uhttpd (2019-08-17-6b03f960-3) to root...
630 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
631 Installing liblua5.1.5 (5.1.5-5) to root...
632 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
633 Installing lua (5.1.5-5) to root...
634 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
635 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
636 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
637 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
638 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
639 Installing rpcd (2019-06-05-89bfaa42-3) to root...
640 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
641 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
642 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
643 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
644 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
645 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
646 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
647 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
648 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
649 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
650 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
651 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
652 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
653 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
654 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
655 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
656 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
657 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
658 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
659 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
660 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
661 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
662 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
663 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
664 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
665 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
666 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
667 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
668 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
669 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
670 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
671 Installing rpcd-mod-rrdns (20170710) to root...
672 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
673 Configuring liblucihttp0.
674 Configuring luci-app-opkg.
675 Configuring rpcd.
676 Configuring liblua5.1.5.
677 Configuring luci-lib-ip.
678 Configuring libubus-lua.
679 Configuring libiwinfo-lua.
680 Configuring lua.
681 Configuring luci-lib-nixio.
682 Configuring luci-lib-jsonc.
683 Configuring liblucihttp-lua.
684 Configuring luci-base.
685 Configuring luci-mod-system.
686 Configuring luci-theme-bootstrap.
687 Configuring luci-mod-status.
688 Configuring luci-app-firewall.
689 Configuring luci-proto-ppp.
690 Configuring luci-mod-network.
691 Configuring luci-mod-admin-full.
692 Configuring luci-proto-ipv6.
693 Configuring uhttpd.
694 Configuring rpcd-mod-rrdns.
695 Configuring luci.
696 root@OpenWrt:/etc# df -h
Leon Poon 2.1 697 Filesystem Size Used Available Use% Mounted on
Leon Poon 11.1 698 /dev/root 2.8M 2.8M 0 100% /rom
699 tmpfs 123.5M 764.0K 122.8M 1% /tmp
700 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
701 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
Leon Poon 6.1 702 tmpfs 512.0K 0 512.0K 0% /dev
Leon Poon 11.1 703 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
704 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
705 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
706 [ 2075.984368] device wlan0 entered promiscuous mode
707 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
708 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
709 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
710 [ 2096.494533] device wlan0 left promiscuous mode
711 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
712 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
713 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
714 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
715 [ 2097.404922] device wlan0 entered promiscuous mode
716 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
717 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
718 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
719 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
720 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
721 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
722 [ 2117.964353] device wlan0 left promiscuous mode
723 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
724 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
725 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
726 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
727 [ 2118.804171] device wlan0 entered promiscuous mode
728 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
729 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
730 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
731 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
732 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
733 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
734 [ 2245.748473] device wlan0 left promiscuous mode
735 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
736 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
737 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
738 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
739 [ 2246.557667] device wlan0 entered promiscuous mode
740 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
741 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
742 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
743 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
744 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
745 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
746
747 root@OpenWrt:/etc#
748 root@OpenWrt:/etc# uci show wireless
749 wireless.radio0=wifi-device
750 wireless.radio0.type='mac80211'
751 wireless.radio0.channel='11'
752 wireless.radio0.hwmode='11g'
753 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
754 wireless.radio0.country='00'
755 wireless.radio0.legacy_rates='1'
756 wireless.radio0.htmode='HT20'
757 wireless.default_radio0=wifi-iface
758 wireless.default_radio0.device='radio0'
759 wireless.default_radio0.network='lan'
760 wireless.default_radio0.mode='ap'
761 wireless.default_radio0.encryption='psk2'
762 wireless.default_radio0.key='qwerty1234'
763 wireless.default_radio0.ssid='asdf'
764 wireless.radio1=wifi-device
765 wireless.radio1.type='mac80211'
766 wireless.radio1.channel='36'
767 wireless.radio1.hwmode='11a'
768 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
769 wireless.radio1.htmode='VHT80'
770 wireless.radio1.__toggle='Enable'
771 wireless.radio1.country='00'
772 wireless.radio1.legacy_rates='1'
773 wireless.default_radio1=wifi-iface
774 wireless.default_radio1.device='radio1'
775 wireless.default_radio1.network='lan'
776 wireless.default_radio1.mode='ap'
777 wireless.default_radio1.ssid='asdf'
778 wireless.default_radio1.encryption='psk2'
779 wireless.default_radio1.key='qwerty1234'
780 root@OpenWrt:/etc#
Leon Poon 6.1 781 {{/code}}
Leon Poon 12.1 782
783 Firmware:
784
785 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin