Skip to Content

Wiki source code of Openwrt for Linksys EA8100

Version 52.1 by Leon Poon on 2021/06/27 04:14
Hide last authors
Leon Poon 1.1 1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
Leon Poon 17.1 3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
Leon Poon 1.1 4
Leon Poon 52.1 5 (% class="wikigeneratedid" %)
6 = 21.02.x =
Leon Poon 2.1 7
Leon Poon 52.1 8 Thanks to [[this patch>>https://github.com/openwrt/openwrt/commit/97df795b78dc572ea2ec105ccbf8af27cc4b4d8e]], EA8100 is now supported from v21.02.
9
10 21.02 release is currently at RC3. You can get it from [[openwrt firmware selector>>https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ramips%2Fmt7621&id=linksys_ea8100-v1]] page.
11
12 Both 2.4Ghz and 5Ghz wifi are working fine.
13
Leon Poon 13.1 14 = 19.07.x =
15
Leon Poon 43.1 16 Openwrt 19.07.7 for EA8100 is here!
Leon Poon 13.1 17
Leon Poon 43.1 18 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
Leon Poon 28.1 19
Leon Poon 32.1 20 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
21 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
22
Leon Poon 51.1 23 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
Leon Poon 32.1 24
Leon Poon 49.1 25 (% class="box warningmessage" %)
26 (((
Leon Poon 51.1 27 Always use a PC connected to the device via wired ethernet for flashing firmwares.
Leon Poon 49.1 28 )))
29
Leon Poon 51.1 30 Follow these instructions:
31
Leon Poon 46.1 32 1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
33 1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
Leon Poon 47.1 34 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
Leon Poon 45.1 35 1. Flash **##squashfs-sysupgrade.bin##** via LuCi
Leon Poon 40.1 36 1. Wait for it to reboot. Now you can configure!
Leon Poon 13.1 37
Leon Poon 48.1 38 For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
Leon Poon 42.1 39
40 {{code language="none"}}
Leon Poon 43.1 41 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
Leon Poon 42.1 42 {{/code}}
43
Leon Poon 29.1 44 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
Leon Poon 15.1 45
Leon Poon 41.1 46 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
Leon Poon 13.1 47
Leon Poon 41.1 48 {{warning}}
49 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
50 {{/warning}}
51
Leon Poon 40.1 52 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
53
54 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
55
56 --How to flash if your router currently has stock Linksys firmware:--
57
58 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
59 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
60 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
61 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
62 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
63 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
64 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
65 1. --Run: ##opkg update##--
66 1. --Run: ##**opkg install luci**##--
67 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
68
Leon Poon 13.1 69 = 18.x =
70
Leon Poon 11.1 71 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
Leon Poon 2.1 72
Leon Poon 11.1 73 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
74 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
Leon Poon 6.1 75
Leon Poon 11.1 76 Note that sysupgrade to a newer image is not likely to work.
77
Leon Poon 12.1 78 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
Leon Poon 11.1 79 |[[image:1567332570723-651.png]]
80
Leon Poon 6.1 81 Dmesg:
82
83 {{code language="plain"}}
Leon Poon 11.1 84 3: Boot system code via Flash (default).
85 4: Entr boot command line interface.
86 7: Load Boot Loader code then write to Flash via Serial.
87 9: Load Boot Loader code then write to Flash via TFTP. 4
88 You choosed 2
89 0
Leon Poon 2.1 90
Leon Poon 11.1 91
92 2: System Load Linux Kernel then write to Flash via TFTP.
93 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
94 Please Input new ones /or Ctrl-C to discard
95 Input device IP () ==:
96 Input server IP () ==:
97 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
98 which kernel partition to update (1/2/3=both) (2) ==:3
99
100 NetTxPacket = 0x8FFE3200
101
102 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
103
104 NetLoop,call eth_halt !
105
106 NetLoop,call eth_init !
107 Trying Eth0 (10/100-M)
108
109 Waitting for RX_DMA_BUSY status Start... done
110
111
112 ETH_STATE_ACTIVE!!
113 TFTP from server ; our IP address is
114 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
115
116 TIMEOUT_COUNT=10,Load address: 0x80100000
117 Loading: Got ARP REPLY, set server/gtwy eth addr ()
118 Got it
119 #################################################################
120 #################################################################
121 #################################################################
122 #################################################################
123 #################################################################
124 #################################################################
125 #################################################################
126 #################################################################
127 #################################################################
128 #################################################################
129 #################################################################
130 #################################################################
131 #################################################################
132 #################################################################
133 #################################################################
134 #################################################################
135 #################################################################
136 ################################################
137 done
138 Bytes transferred = 5898496 (5a0100 hex)
139 LoadAddr=80100000 NetBootFileXferSize= 005a0100
140 ranand_erase: start:180000, len:20000
141 ..ranand_erase: start:1a0000, len:20000
142 ..ranand_erase: start:1c0000, len:20000
143 ...
144 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
145 Done!
146 ranand_erase: start:2980000, len:20000
147 ..ranand_erase: start:29a0000, len:20000
148 ..ranand_erase: start:29c0000, len:20000
149 ...
150 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
151 Done!
152 ## Booting image at bc180000 ...
153 Image Name: MIPS OpenWrt Linux-4.14.141
Leon Poon 2.1 154 Image Type: MIPS Linux Kernel Image (lzma compressed)
Leon Poon 11.1 155 Data Size: 2010110 Bytes = 1.9 MB
Leon Poon 2.1 156 Load Address: 80001000
157 Entry Point: 80001000
Leon Poon 11.1 158 ............................... Verifying Checksum ... OK
Leon Poon 2.1 159 Uncompressing Kernel Image ... OK
160 No initrd
Leon Poon 6.1 161 ## Transferring control to Linux (at address 80001000) ...
162 ## Giving linux memsize in MB, 256
Leon Poon 2.1 163
164 Starting kernel ...
165
Leon Poon 11.1 166 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
Leon Poon 2.1 167 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
168 [ 0.000000] bootconsole [early0] enabled
169 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
170 [ 0.000000] MIPS: machine is Linksys EA8100
171 [ 0.000000] Determined physical RAM map:
172 [ 0.000000] memory: 10000000 @ 00000000 (usable)
173 [ 0.000000] Initrd not found or empty - disabling initrd
174 [ 0.000000] VPE topology {2,2} total 4
175 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
176 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
177 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
178 [ 0.000000] Zone ranges:
179 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
180 [ 0.000000] HighMem empty
181 [ 0.000000] Movable zone start for each node
182 [ 0.000000] Early memory node ranges
183 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
184 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Leon Poon 11.1 185 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
186 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
187 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
Leon Poon 2.1 188 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
189 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
190 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
191 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Leon Poon 11.1 192 [ 0.000000] Writing ErrCtl register=0002c420
193 [ 0.000000] Readback ErrCtl register=0002c420
194 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
Leon Poon 2.1 195 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
196 [ 0.000000] Hierarchical RCU implementation.
197 [ 0.000000] NR_IRQS: 256
198 [ 0.000000] CPU Clock: 880MHz
199 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
200 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
201 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Leon Poon 11.1 202 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
203 [ 0.073969] pid_max: default: 32768 minimum: 301
204 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
205 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
206 [ 0.094340] Hierarchical SRCU implementation.
207 [ 0.099495] smp: Bringing up secondary CPUs ...
208 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
209 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
210 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
211 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
212 [ 0.164211] Synchronize counters for CPU 1: done.
213 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
214 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
215 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
216 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
217 [ 0.255179] Synchronize counters for CPU 2: done.
218 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
219 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
220 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
221 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
222 [ 0.340367] Synchronize counters for CPU 3: done.
223 [ 0.370232] smp: Brought up 1 node, 4 CPUs
224 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
225 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
226 [ 0.394408] pinctrl core: initialized pinctrl subsystem
227 [ 0.401009] NET: Registered protocol family 16
228 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
229 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
230 [ 0.725598] ***** Xtal 40MHz *****
231 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
232 [ 0.734049] Port 0 N_FTS = 1b102800
233 [ 0.737517] Port 1 N_FTS = 1b102800
234 [ 0.740963] Port 2 N_FTS = 1b102800
235 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
236 [ 1.900719] -> 21007f2
237 [ 1.903123] PCIE0 enabled
238 [ 1.905712] PCIE1 enabled
239 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
240 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
241 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
242 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
243 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
244 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
245 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
246 [ 1.958178] PCI host bridge to bus 0000:00
247 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
248 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
249 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
250 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
251 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
252 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
253 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
254 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
255 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
256 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
257 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
258 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
259 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
260 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
261 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
262 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
263 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
264 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
265 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
266 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
267 [ 2.100582] clocksource: Switched to clocksource GIC
268 [ 2.107275] NET: Registered protocol family 2
269 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
270 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
271 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
272 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
273 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
274 [ 2.144212] NET: Registered protocol family 1
275 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
276 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
277 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
278 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
279 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
280 [ 2.425815] random: fast init done
281 [ 2.430745] io scheduler noop registered
282 [ 2.434579] io scheduler deadline registered (default)
283 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
284 [ 2.448257] console [ttyS0] disabled
285 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
286 [ 2.460836] console [ttyS0] enabled
287 [ 2.460836] console [ttyS0] enabled
288 [ 2.467691] bootconsole [early0] disabled
289 [ 2.467691] bootconsole [early0] disabled
290 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
291 [ 2.484816] Enable NFI Clock
292 [ 2.487689] # MTK NAND # : Use HW ECC
293 [ 2.491382] Device not found, ID: c2f1
294 [ 2.495110] Not Support this Device!
295 [ 2.498835] chip_mode=00000001
296 [ 2.501893] Support this Device in MTK table! c2f1
297 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
298 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
299 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
300 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
301 [ 2.531927] Scanning device for bad blocks
302 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
303 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
304 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
305 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
306 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
307 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
308 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
309 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
310 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
311 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
312 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
313 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
314 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
315 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
316 [ 3.456742] [mtk_nand] probe successfully!
317 [ 3.461570] Signature matched and data read!
318 [ 3.465818] load_fact_bbt success 1023
319 [ 3.470276] libphy: Fixed MDIO Bus: probed
320 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
321 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
322 [ 3.556774] libphy: mdio: probed
323 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
324 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
325 [ 4.978262] NET: Registered protocol family 10
326 [ 4.984286] Segment Routing with IPv6
327 [ 4.988020] NET: Registered protocol family 17
328 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
329 [ 4.999621] UBI: auto-attach mtd9
330 [ 5.003015] ubi0: attaching mtd9
331 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
332 [ 5.039967] ubi0: scanning is finished
333 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
334 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
335 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
336 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
337 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
338 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
339 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
340 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
341 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
342 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
343 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
344 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
345 [ 5.165234] hctosys: unable to open rtc device (rtc0)
346 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
347 [ 5.195491] Freeing unused kernel memory: 1260K
348 [ 5.200022] This architecture does not have kernel memory protection.
349 [ 5.783744] init: Console is alive
350 [ 5.787378] init: - watchdog -
351 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
352 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
353 [ 6.591413] usbcore: registered new interface driver usbfs
354 [ 6.596966] usbcore: registered new interface driver hub
355 [ 6.602453] usbcore: registered new device driver usb
356 [ 6.615285] SCSI subsystem initialized
357 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
358 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
359 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
360 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
361 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
362 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
363 [ 6.676639] hub 1-0:1.0: USB hub found
364 [ 6.680467] hub 1-0:1.0: 2 ports detected
365 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
366 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
367 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
368 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
369 [ 6.713446] hub 2-0:1.0: USB hub found
370 [ 6.717275] hub 2-0:1.0: 1 port detected
371 [ 6.727313] usbcore: registered new interface driver usb-storage
372 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
373 [ 6.750877] init: - preinit -
374 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
375 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
376 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
377 [ 7.225920] scsi host0: usb-storage 2-1:1.0
378 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
Leon Poon 2.1 379 Press the [f] key and hit [enter] to enter failsafe mode
380 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Leon Poon 11.1 381 [ 10.582466] UBIFS (ubi0:1): default file-system created
382 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
383 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
384 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
385 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
386 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
387 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
388 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
389 [ 10.756981] mount_root: switching to ubifs overlay
390 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
391 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
392 [ 10.876085] procd: - early -
393 [ 10.879061] procd: - watchdog -
394 [ 11.550737] procd: - watchdog -
395 [ 11.554202] procd: - ubus -
396 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
397 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
398 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
399 [ 11.625387] procd: - init -
Leon Poon 2.1 400 Please press Enter to activate this console.
Leon Poon 11.1 401 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
402 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
403 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
404 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
405 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
406 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
407 [ 12.127574] urngd: v1.0.0 started.
408 [ 12.145053] xt_time: kernel timezone is -0000
409 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
410 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
411 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
412 [ 12.241178]
413 [ 12.266469] random: crng init done
414 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
415 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
416 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
417 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
418 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
419 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
420 [ 20.161193]
421 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
422 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
423 [ 27.852570] PPP generic driver version 2.4.2
424 [ 27.858358] NET: Registered protocol family 24
425 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
426 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
427 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
428 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
429 [ 41.299522] device eth0.2 entered promiscuous mode
430 [ 41.304484] device eth0 entered promiscuous mode
431 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
432 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
433 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
434 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Leon Poon 2.1 435
436
437
Leon Poon 11.1 438 BusyBox v1.31.0 () built-in shell (ash)
439
Leon Poon 6.1 440 _______ ________ __
441 | |.-----.-----.-----.| | | |.----.| |_
442 | - || _ | -__| || | | || _|| _|
443 |_______|| __|_____|__|__||________||__| |____|
444 |__| W I R E L E S S F R E E D O M
445 -----------------------------------------------------
Leon Poon 11.1 446 OpenWrt SNAPSHOT, r10942-9bebafcb5d
Leon Poon 6.1 447 -----------------------------------------------------
448 === WARNING! =====================================
Leon Poon 2.1 449 There is no root password defined on this device!
450 Use the "passwd" command to set up a new password
451 in order to prevent unauthorized SSH logins.
Leon Poon 6.1 452 --------------------------------------------------
Leon Poon 11.1 453 root@OpenWrt:/# ifconfig -a
454 br-lan Link encap:Ethernet HWaddr
455 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
456 inet6 addr: fde0:62db:5134::1/60 Scope:Global
457 inet6 addr: fe80::/64 Scope:Link
458 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
459 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
460 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
461 collisions:0 txqueuelen:1000
462 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
463
464 eth0 Link encap:Ethernet HWaddr
465 inet6 addr: fe80::/64 Scope:Link
466 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
467 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
468 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
469 collisions:0 txqueuelen:1000
470 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
471 Interrupt:21
472
473 eth0.1 Link encap:Ethernet HWaddr
474 inet6 addr: fe80::/64 Scope:Link
475 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
476 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
477 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
478 collisions:0 txqueuelen:1000
479 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
480
481 eth0.2 Link encap:Ethernet HWaddr
482 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
483 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
484 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
485 collisions:0 txqueuelen:1000
486 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
487
488 lo Link encap:Local Loopback
489 inet addr:127.0.0.1 Mask:255.0.0.0
490 inet6 addr: ::1/128 Scope:Host
491 UP LOOPBACK RUNNING MTU:65536 Metric:1
492 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
493 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
494 collisions:0 txqueuelen:1000
495 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
496
497 wlan0 Link encap:Ethernet HWaddr
498 BROADCAST MULTICAST MTU:1500 Metric:1
499 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
500 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
501 collisions:0 txqueuelen:1000
502 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
503
504 wlan1 Link encap:Ethernet HWaddr
505 BROADCAST MULTICAST MTU:1500 Metric:1
506 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
507 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
508 collisions:0 txqueuelen:1000
509 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
510
511 root@OpenWrt:/# ls -l
512 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
513 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
514 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
515 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
516 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
517 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
518 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
519 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
520 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
521 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
522 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
523 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
524 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
525 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
526 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
527 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
528 root@OpenWrt:/# ps
529 PID USER VSZ STAT COMMAND
530 1 root 1576 S /sbin/procd
531 2 root 0 SW [kthreadd]
532 3 root 0 IW [kworker/0:0]
533 4 root 0 IW< [kworker/0:0H]
534 5 root 0 IW [kworker/u8:0]
535 6 root 0 IW< [mm_percpu_wq]
536 7 root 0 SW [ksoftirqd/0]
537 8 root 0 IW [rcu_sched]
538 9 root 0 IW [rcu_bh]
539 10 root 0 SW [migration/0]
540 11 root 0 SW [cpuhp/0]
541 12 root 0 SW [cpuhp/1]
542 13 root 0 SW [migration/1]
543 14 root 0 SW [ksoftirqd/1]
544 16 root 0 IW< [kworker/1:0H]
545 17 root 0 SW [cpuhp/2]
546 18 root 0 SW [migration/2]
547 19 root 0 SW [ksoftirqd/2]
548 21 root 0 IW< [kworker/2:0H]
549 22 root 0 SW [cpuhp/3]
550 23 root 0 SW [migration/3]
551 24 root 0 SW [ksoftirqd/3]
552 25 root 0 IW [kworker/3:0]
553 26 root 0 IW< [kworker/3:0H]
554 27 root 0 IW< [netns]
555 41 root 0 IW [kworker/u8:3]
556 68 root 0 IW [kworker/3:1]
557 69 root 0 IW [kworker/2:1]
558 138 root 0 IW [kworker/1:1]
559 139 root 0 SW [oom_reaper]
560 140 root 0 IW< [writeback]
561 142 root 0 SW [kcompactd0]
562 143 root 0 IW< [crypto]
563 145 root 0 IW< [kblockd]
564 175 root 0 IW< [watchdogd]
565 199 root 0 SW [kswapd0]
566 268 root 0 IW< [pencrypt]
567 270 root 0 IW< [pdecrypt]
568 366 root 0 IW< [ipv6_addrconf]
569 378 root 0 SW [ubi_bgt0d]
570 383 root 0 IW< [kworker/0:1H]
571 384 root 0 IW< [kworker/2:1H]
572 385 root 0 IW [kworker/2:2]
573 386 root 0 IW< [kworker/3:1H]
574 389 root 0 IW< [kworker/1:1H]
575 429 root 0 IW [kworker/0:2]
576 437 root 0 IW [kworker/1:2]
577 453 root 0 SW [scsi_eh_0]
578 454 root 0 IW< [scsi_tmf_0]
579 455 root 0 SW [usb-storage]
580 496 root 0 SW [ubifs_bgt0_1]
581 573 root 1220 S /sbin/ubusd
582 574 root 1220 S /bin/ash --login
583 591 root 1028 S /sbin/urngd
584 660 root 0 IW< [cfg80211]
585 1012 root 1248 S /sbin/logd -S 64
586 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
587 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
588 1168 root 1700 S /sbin/netifd
589 1204 root 1448 S /usr/sbin/odhcpd
590 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
591 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
592 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
593 1720 root 1212 R ps
594 root@OpenWrt:/etc# ping www.google.co
595 PING www.google.co (): 56 data bytes
596 64 bytes from : seq=0 ttl=52 time=4.718 ms
597 ^C
598 --- www.google.co ping statistics ---
599 1 packets transmitted, 1 packets received, 0% packet loss
600 round-trip min/avg/max = 4.718/4.718/4.718 ms
601 root@OpenWrt:/etc# ping www.google.com
602 PING www.google.com (): 56 data bytes
603 64 bytes from : seq=0 ttl=47 time=4.927 ms
604 64 bytes from : seq=1 ttl=47 time=4.687 ms
605 ^C
606 --- www.google.com ping statistics ---
607 2 packets transmitted, 2 packets received, 0% packet loss
608 round-trip min/avg/max = 4.687/4.807/4.927 ms
609 root@OpenWrt:/etc# opkg update
610 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
611 Updated list of available packages in /var/opkg-lists/openwrt_core
612 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
613 Signature check passed.
614 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
615 Updated list of available packages in /var/opkg-lists/openwrt_base
616 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
617 Signature check passed.
618 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
619 Updated list of available packages in /var/opkg-lists/openwrt_luci
620 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
621 Signature check passed.
622 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
623 Updated list of available packages in /var/opkg-lists/openwrt_packages
624 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
625 Signature check passed.
626 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
627 Updated list of available packages in /var/opkg-lists/openwrt_routing
628 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
629 Signature check passed.
630 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
631 Updated list of available packages in /var/opkg-lists/openwrt_telephony
632 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
633 Signature check passed.
634 root@OpenWrt:/etc# opkg install luci
635 Installing luci (git-19.241.65047-dffe9ca-1) to root...
636 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
637 Installing uhttpd (2019-08-17-6b03f960-3) to root...
638 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
639 Installing liblua5.1.5 (5.1.5-5) to root...
640 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
641 Installing lua (5.1.5-5) to root...
642 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
643 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
644 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
645 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
646 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
647 Installing rpcd (2019-06-05-89bfaa42-3) to root...
648 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
649 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
650 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
651 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
652 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
653 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
654 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
655 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
656 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
657 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
658 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
659 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
660 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
661 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
662 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
663 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
664 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
665 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
666 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
667 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
668 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
669 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
670 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
671 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
672 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
673 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
674 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
675 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
676 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
677 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
678 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
679 Installing rpcd-mod-rrdns (20170710) to root...
680 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
681 Configuring liblucihttp0.
682 Configuring luci-app-opkg.
683 Configuring rpcd.
684 Configuring liblua5.1.5.
685 Configuring luci-lib-ip.
686 Configuring libubus-lua.
687 Configuring libiwinfo-lua.
688 Configuring lua.
689 Configuring luci-lib-nixio.
690 Configuring luci-lib-jsonc.
691 Configuring liblucihttp-lua.
692 Configuring luci-base.
693 Configuring luci-mod-system.
694 Configuring luci-theme-bootstrap.
695 Configuring luci-mod-status.
696 Configuring luci-app-firewall.
697 Configuring luci-proto-ppp.
698 Configuring luci-mod-network.
699 Configuring luci-mod-admin-full.
700 Configuring luci-proto-ipv6.
701 Configuring uhttpd.
702 Configuring rpcd-mod-rrdns.
703 Configuring luci.
704 root@OpenWrt:/etc# df -h
Leon Poon 2.1 705 Filesystem Size Used Available Use% Mounted on
Leon Poon 11.1 706 /dev/root 2.8M 2.8M 0 100% /rom
707 tmpfs 123.5M 764.0K 122.8M 1% /tmp
708 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
709 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
Leon Poon 6.1 710 tmpfs 512.0K 0 512.0K 0% /dev
Leon Poon 11.1 711 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
712 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
713 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
714 [ 2075.984368] device wlan0 entered promiscuous mode
715 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
716 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
717 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
718 [ 2096.494533] device wlan0 left promiscuous mode
719 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
720 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
721 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
722 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
723 [ 2097.404922] device wlan0 entered promiscuous mode
724 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
725 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
726 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
727 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
728 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
729 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
730 [ 2117.964353] device wlan0 left promiscuous mode
731 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
732 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
733 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
734 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
735 [ 2118.804171] device wlan0 entered promiscuous mode
736 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
737 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
738 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
739 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
740 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
741 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
742 [ 2245.748473] device wlan0 left promiscuous mode
743 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
744 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
745 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
746 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
747 [ 2246.557667] device wlan0 entered promiscuous mode
748 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
749 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
750 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
751 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
752 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
753 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
754
755 root@OpenWrt:/etc#
756 root@OpenWrt:/etc# uci show wireless
757 wireless.radio0=wifi-device
758 wireless.radio0.type='mac80211'
759 wireless.radio0.channel='11'
760 wireless.radio0.hwmode='11g'
761 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
762 wireless.radio0.country='00'
763 wireless.radio0.legacy_rates='1'
764 wireless.radio0.htmode='HT20'
765 wireless.default_radio0=wifi-iface
766 wireless.default_radio0.device='radio0'
767 wireless.default_radio0.network='lan'
768 wireless.default_radio0.mode='ap'
769 wireless.default_radio0.encryption='psk2'
770 wireless.default_radio0.key='qwerty1234'
771 wireless.default_radio0.ssid='asdf'
772 wireless.radio1=wifi-device
773 wireless.radio1.type='mac80211'
774 wireless.radio1.channel='36'
775 wireless.radio1.hwmode='11a'
776 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
777 wireless.radio1.htmode='VHT80'
778 wireless.radio1.__toggle='Enable'
779 wireless.radio1.country='00'
780 wireless.radio1.legacy_rates='1'
781 wireless.default_radio1=wifi-iface
782 wireless.default_radio1.device='radio1'
783 wireless.default_radio1.network='lan'
784 wireless.default_radio1.mode='ap'
785 wireless.default_radio1.ssid='asdf'
786 wireless.default_radio1.encryption='psk2'
787 wireless.default_radio1.key='qwerty1234'
788 root@OpenWrt:/etc#
Leon Poon 6.1 789 {{/code}}
Leon Poon 12.1 790
791 Firmware:
792
793 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin