Wiki source code of Openwrt for Linksys EA8100

Version 53.1 by Leon Poon on 2021/06/27 04:45
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5 = 21.02.x =
6
7 Thanks to [[this patch>>https://github.com/openwrt/openwrt/commit/97df795b78dc572ea2ec105ccbf8af27cc4b4d8e]], EA8100 is now supported from openwrt 21.02.
8
9 The 21.02 release is currently at RC3. You can get it from [[openwrt firmware selector>>https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ramips%2Fmt7621&id=linksys_ea8100-v1]] page.
10
11 Both 2.4Ghz and 5Ghz wifi are working fine.
12
13 = 19.07.x =
14
15 Openwrt 19.07.7 for EA8100 is here!
16
17 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
18
19 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
20 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
21
22 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
23
24 (% class="box warningmessage" %)
25 (((
26 Always use a PC connected to the device via wired ethernet for flashing firmwares.
27 )))
28
29 Follow these instructions:
30
31 1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
32 1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
33 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
34 1. Flash **##squashfs-sysupgrade.bin##** via LuCi
35 1. Wait for it to reboot. Now you can configure!
36
37 For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
38
39 {{code language="none"}}
40 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
41 {{/code}}
42
43 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
44
45 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
46
47 {{warning}}
48 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
49 {{/warning}}
50
51 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
52
53 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
54
55 --How to flash if your router currently has stock Linksys firmware:--
56
57 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
58 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
59 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
60 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
61 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
62 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
63 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
64 1. --Run: ##opkg update##--
65 1. --Run: ##**opkg install luci**##--
66 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
67
68 = 18.x =
69
70 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
71
72 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
73 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
74
75 Note that sysupgrade to a newer image is not likely to work.
76
77 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
78 |[[image:1567332570723-651.png]]
79
80 Dmesg:
81
82 {{code language="plain"}}
83 3: Boot system code via Flash (default).
84 4: Entr boot command line interface.
85 7: Load Boot Loader code then write to Flash via Serial.
86 9: Load Boot Loader code then write to Flash via TFTP. 4
87 You choosed 2
88 0
89
90
91 2: System Load Linux Kernel then write to Flash via TFTP.
92 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
93 Please Input new ones /or Ctrl-C to discard
94 Input device IP () ==:
95 Input server IP () ==:
96 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
97 which kernel partition to update (1/2/3=both) (2) ==:3
98
99 NetTxPacket = 0x8FFE3200
100
101 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
102
103 NetLoop,call eth_halt !
104
105 NetLoop,call eth_init !
106 Trying Eth0 (10/100-M)
107
108 Waitting for RX_DMA_BUSY status Start... done
109
110
111 ETH_STATE_ACTIVE!!
112 TFTP from server ; our IP address is
113 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
114
115 TIMEOUT_COUNT=10,Load address: 0x80100000
116 Loading: Got ARP REPLY, set server/gtwy eth addr ()
117 Got it
118 #################################################################
119 #################################################################
120 #################################################################
121 #################################################################
122 #################################################################
123 #################################################################
124 #################################################################
125 #################################################################
126 #################################################################
127 #################################################################
128 #################################################################
129 #################################################################
130 #################################################################
131 #################################################################
132 #################################################################
133 #################################################################
134 #################################################################
135 ################################################
136 done
137 Bytes transferred = 5898496 (5a0100 hex)
138 LoadAddr=80100000 NetBootFileXferSize= 005a0100
139 ranand_erase: start:180000, len:20000
140 ..ranand_erase: start:1a0000, len:20000
141 ..ranand_erase: start:1c0000, len:20000
142 ...
143 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
144 Done!
145 ranand_erase: start:2980000, len:20000
146 ..ranand_erase: start:29a0000, len:20000
147 ..ranand_erase: start:29c0000, len:20000
148 ...
149 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
150 Done!
151 ## Booting image at bc180000 ...
152 Image Name: MIPS OpenWrt Linux-4.14.141
153 Image Type: MIPS Linux Kernel Image (lzma compressed)
154 Data Size: 2010110 Bytes = 1.9 MB
155 Load Address: 80001000
156 Entry Point: 80001000
157 ............................... Verifying Checksum ... OK
158 Uncompressing Kernel Image ... OK
159 No initrd
160 ## Transferring control to Linux (at address 80001000) ...
161 ## Giving linux memsize in MB, 256
162
163 Starting kernel ...
164
165 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
166 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
167 [ 0.000000] bootconsole [early0] enabled
168 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
169 [ 0.000000] MIPS: machine is Linksys EA8100
170 [ 0.000000] Determined physical RAM map:
171 [ 0.000000] memory: 10000000 @ 00000000 (usable)
172 [ 0.000000] Initrd not found or empty - disabling initrd
173 [ 0.000000] VPE topology {2,2} total 4
174 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
175 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
176 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
177 [ 0.000000] Zone ranges:
178 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
179 [ 0.000000] HighMem empty
180 [ 0.000000] Movable zone start for each node
181 [ 0.000000] Early memory node ranges
182 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
183 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
184 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
185 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
186 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
187 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
188 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
189 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
190 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
191 [ 0.000000] Writing ErrCtl register=0002c420
192 [ 0.000000] Readback ErrCtl register=0002c420
193 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
194 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
195 [ 0.000000] Hierarchical RCU implementation.
196 [ 0.000000] NR_IRQS: 256
197 [ 0.000000] CPU Clock: 880MHz
198 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
199 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
200 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
201 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
202 [ 0.073969] pid_max: default: 32768 minimum: 301
203 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
204 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
205 [ 0.094340] Hierarchical SRCU implementation.
206 [ 0.099495] smp: Bringing up secondary CPUs ...
207 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
208 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
209 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
210 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
211 [ 0.164211] Synchronize counters for CPU 1: done.
212 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
213 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
214 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
215 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
216 [ 0.255179] Synchronize counters for CPU 2: done.
217 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
218 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
219 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
220 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
221 [ 0.340367] Synchronize counters for CPU 3: done.
222 [ 0.370232] smp: Brought up 1 node, 4 CPUs
223 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
224 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
225 [ 0.394408] pinctrl core: initialized pinctrl subsystem
226 [ 0.401009] NET: Registered protocol family 16
227 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
228 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
229 [ 0.725598] ***** Xtal 40MHz *****
230 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
231 [ 0.734049] Port 0 N_FTS = 1b102800
232 [ 0.737517] Port 1 N_FTS = 1b102800
233 [ 0.740963] Port 2 N_FTS = 1b102800
234 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
235 [ 1.900719] -> 21007f2
236 [ 1.903123] PCIE0 enabled
237 [ 1.905712] PCIE1 enabled
238 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
239 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
240 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
241 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
242 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
243 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
244 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
245 [ 1.958178] PCI host bridge to bus 0000:00
246 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
247 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
248 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
249 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
250 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
251 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
252 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
253 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
254 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
255 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
256 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
257 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
258 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
259 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
260 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
261 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
262 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
263 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
264 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
265 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
266 [ 2.100582] clocksource: Switched to clocksource GIC
267 [ 2.107275] NET: Registered protocol family 2
268 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
269 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
270 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
271 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
272 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
273 [ 2.144212] NET: Registered protocol family 1
274 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
275 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
276 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
277 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
278 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
279 [ 2.425815] random: fast init done
280 [ 2.430745] io scheduler noop registered
281 [ 2.434579] io scheduler deadline registered (default)
282 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
283 [ 2.448257] console [ttyS0] disabled
284 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
285 [ 2.460836] console [ttyS0] enabled
286 [ 2.460836] console [ttyS0] enabled
287 [ 2.467691] bootconsole [early0] disabled
288 [ 2.467691] bootconsole [early0] disabled
289 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
290 [ 2.484816] Enable NFI Clock
291 [ 2.487689] # MTK NAND # : Use HW ECC
292 [ 2.491382] Device not found, ID: c2f1
293 [ 2.495110] Not Support this Device!
294 [ 2.498835] chip_mode=00000001
295 [ 2.501893] Support this Device in MTK table! c2f1
296 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
297 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
298 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
299 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
300 [ 2.531927] Scanning device for bad blocks
301 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
302 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
303 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
304 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
305 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
306 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
307 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
308 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
309 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
310 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
311 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
312 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
313 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
314 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
315 [ 3.456742] [mtk_nand] probe successfully!
316 [ 3.461570] Signature matched and data read!
317 [ 3.465818] load_fact_bbt success 1023
318 [ 3.470276] libphy: Fixed MDIO Bus: probed
319 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
320 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
321 [ 3.556774] libphy: mdio: probed
322 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
323 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
324 [ 4.978262] NET: Registered protocol family 10
325 [ 4.984286] Segment Routing with IPv6
326 [ 4.988020] NET: Registered protocol family 17
327 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
328 [ 4.999621] UBI: auto-attach mtd9
329 [ 5.003015] ubi0: attaching mtd9
330 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
331 [ 5.039967] ubi0: scanning is finished
332 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
333 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
334 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
335 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
336 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
337 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
338 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
339 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
340 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
341 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
342 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
343 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
344 [ 5.165234] hctosys: unable to open rtc device (rtc0)
345 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
346 [ 5.195491] Freeing unused kernel memory: 1260K
347 [ 5.200022] This architecture does not have kernel memory protection.
348 [ 5.783744] init: Console is alive
349 [ 5.787378] init: - watchdog -
350 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
351 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
352 [ 6.591413] usbcore: registered new interface driver usbfs
353 [ 6.596966] usbcore: registered new interface driver hub
354 [ 6.602453] usbcore: registered new device driver usb
355 [ 6.615285] SCSI subsystem initialized
356 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
357 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
358 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
359 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
360 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
361 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
362 [ 6.676639] hub 1-0:1.0: USB hub found
363 [ 6.680467] hub 1-0:1.0: 2 ports detected
364 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
365 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
366 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
367 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
368 [ 6.713446] hub 2-0:1.0: USB hub found
369 [ 6.717275] hub 2-0:1.0: 1 port detected
370 [ 6.727313] usbcore: registered new interface driver usb-storage
371 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
372 [ 6.750877] init: - preinit -
373 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
374 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
375 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
376 [ 7.225920] scsi host0: usb-storage 2-1:1.0
377 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
378 Press the [f] key and hit [enter] to enter failsafe mode
379 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
380 [ 10.582466] UBIFS (ubi0:1): default file-system created
381 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
382 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
383 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
384 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
385 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
386 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
387 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
388 [ 10.756981] mount_root: switching to ubifs overlay
389 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
390 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
391 [ 10.876085] procd: - early -
392 [ 10.879061] procd: - watchdog -
393 [ 11.550737] procd: - watchdog -
394 [ 11.554202] procd: - ubus -
395 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
396 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
397 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
398 [ 11.625387] procd: - init -
399 Please press Enter to activate this console.
400 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
401 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
402 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
403 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
404 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
405 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
406 [ 12.127574] urngd: v1.0.0 started.
407 [ 12.145053] xt_time: kernel timezone is -0000
408 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
409 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
410 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
411 [ 12.241178]
412 [ 12.266469] random: crng init done
413 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
414 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
415 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
416 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
417 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
418 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
419 [ 20.161193]
420 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
421 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
422 [ 27.852570] PPP generic driver version 2.4.2
423 [ 27.858358] NET: Registered protocol family 24
424 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
425 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
426 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
427 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
428 [ 41.299522] device eth0.2 entered promiscuous mode
429 [ 41.304484] device eth0 entered promiscuous mode
430 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
431 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
432 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
433 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
434
435
436
437 BusyBox v1.31.0 () built-in shell (ash)
438
439 _______ ________ __
440 | |.-----.-----.-----.| | | |.----.| |_
441 | - || _ | -__| || | | || _|| _|
442 |_______|| __|_____|__|__||________||__| |____|
443 |__| W I R E L E S S F R E E D O M
444 -----------------------------------------------------
445 OpenWrt SNAPSHOT, r10942-9bebafcb5d
446 -----------------------------------------------------
447 === WARNING! =====================================
448 There is no root password defined on this device!
449 Use the "passwd" command to set up a new password
450 in order to prevent unauthorized SSH logins.
451 --------------------------------------------------
452 root@OpenWrt:/# ifconfig -a
453 br-lan Link encap:Ethernet HWaddr
454 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
455 inet6 addr: fde0:62db:5134::1/60 Scope:Global
456 inet6 addr: fe80::/64 Scope:Link
457 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
458 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
459 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
460 collisions:0 txqueuelen:1000
461 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
462
463 eth0 Link encap:Ethernet HWaddr
464 inet6 addr: fe80::/64 Scope:Link
465 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
466 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
467 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
468 collisions:0 txqueuelen:1000
469 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
470 Interrupt:21
471
472 eth0.1 Link encap:Ethernet HWaddr
473 inet6 addr: fe80::/64 Scope:Link
474 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
475 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
476 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
477 collisions:0 txqueuelen:1000
478 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
479
480 eth0.2 Link encap:Ethernet HWaddr
481 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
482 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
483 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
484 collisions:0 txqueuelen:1000
485 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
486
487 lo Link encap:Local Loopback
488 inet addr:127.0.0.1 Mask:255.0.0.0
489 inet6 addr: ::1/128 Scope:Host
490 UP LOOPBACK RUNNING MTU:65536 Metric:1
491 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
492 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
493 collisions:0 txqueuelen:1000
494 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
495
496 wlan0 Link encap:Ethernet HWaddr
497 BROADCAST MULTICAST MTU:1500 Metric:1
498 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
499 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
500 collisions:0 txqueuelen:1000
501 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
502
503 wlan1 Link encap:Ethernet HWaddr
504 BROADCAST MULTICAST MTU:1500 Metric:1
505 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
506 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
507 collisions:0 txqueuelen:1000
508 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
509
510 root@OpenWrt:/# ls -l
511 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
512 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
513 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
514 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
515 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
516 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
517 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
518 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
519 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
520 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
521 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
522 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
523 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
524 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
525 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
526 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
527 root@OpenWrt:/# ps
528 PID USER VSZ STAT COMMAND
529 1 root 1576 S /sbin/procd
530 2 root 0 SW [kthreadd]
531 3 root 0 IW [kworker/0:0]
532 4 root 0 IW< [kworker/0:0H]
533 5 root 0 IW [kworker/u8:0]
534 6 root 0 IW< [mm_percpu_wq]
535 7 root 0 SW [ksoftirqd/0]
536 8 root 0 IW [rcu_sched]
537 9 root 0 IW [rcu_bh]
538 10 root 0 SW [migration/0]
539 11 root 0 SW [cpuhp/0]
540 12 root 0 SW [cpuhp/1]
541 13 root 0 SW [migration/1]
542 14 root 0 SW [ksoftirqd/1]
543 16 root 0 IW< [kworker/1:0H]
544 17 root 0 SW [cpuhp/2]
545 18 root 0 SW [migration/2]
546 19 root 0 SW [ksoftirqd/2]
547 21 root 0 IW< [kworker/2:0H]
548 22 root 0 SW [cpuhp/3]
549 23 root 0 SW [migration/3]
550 24 root 0 SW [ksoftirqd/3]
551 25 root 0 IW [kworker/3:0]
552 26 root 0 IW< [kworker/3:0H]
553 27 root 0 IW< [netns]
554 41 root 0 IW [kworker/u8:3]
555 68 root 0 IW [kworker/3:1]
556 69 root 0 IW [kworker/2:1]
557 138 root 0 IW [kworker/1:1]
558 139 root 0 SW [oom_reaper]
559 140 root 0 IW< [writeback]
560 142 root 0 SW [kcompactd0]
561 143 root 0 IW< [crypto]
562 145 root 0 IW< [kblockd]
563 175 root 0 IW< [watchdogd]
564 199 root 0 SW [kswapd0]
565 268 root 0 IW< [pencrypt]
566 270 root 0 IW< [pdecrypt]
567 366 root 0 IW< [ipv6_addrconf]
568 378 root 0 SW [ubi_bgt0d]
569 383 root 0 IW< [kworker/0:1H]
570 384 root 0 IW< [kworker/2:1H]
571 385 root 0 IW [kworker/2:2]
572 386 root 0 IW< [kworker/3:1H]
573 389 root 0 IW< [kworker/1:1H]
574 429 root 0 IW [kworker/0:2]
575 437 root 0 IW [kworker/1:2]
576 453 root 0 SW [scsi_eh_0]
577 454 root 0 IW< [scsi_tmf_0]
578 455 root 0 SW [usb-storage]
579 496 root 0 SW [ubifs_bgt0_1]
580 573 root 1220 S /sbin/ubusd
581 574 root 1220 S /bin/ash --login
582 591 root 1028 S /sbin/urngd
583 660 root 0 IW< [cfg80211]
584 1012 root 1248 S /sbin/logd -S 64
585 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
586 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
587 1168 root 1700 S /sbin/netifd
588 1204 root 1448 S /usr/sbin/odhcpd
589 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
590 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
591 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
592 1720 root 1212 R ps
593 root@OpenWrt:/etc# ping www.google.co
594 PING www.google.co (): 56 data bytes
595 64 bytes from : seq=0 ttl=52 time=4.718 ms
596 ^C
597 --- www.google.co ping statistics ---
598 1 packets transmitted, 1 packets received, 0% packet loss
599 round-trip min/avg/max = 4.718/4.718/4.718 ms
600 root@OpenWrt:/etc# ping www.google.com
601 PING www.google.com (): 56 data bytes
602 64 bytes from : seq=0 ttl=47 time=4.927 ms
603 64 bytes from : seq=1 ttl=47 time=4.687 ms
604 ^C
605 --- www.google.com ping statistics ---
606 2 packets transmitted, 2 packets received, 0% packet loss
607 round-trip min/avg/max = 4.687/4.807/4.927 ms
608 root@OpenWrt:/etc# opkg update
609 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
610 Updated list of available packages in /var/opkg-lists/openwrt_core
611 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
612 Signature check passed.
613 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
614 Updated list of available packages in /var/opkg-lists/openwrt_base
615 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
616 Signature check passed.
617 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
618 Updated list of available packages in /var/opkg-lists/openwrt_luci
619 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
620 Signature check passed.
621 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
622 Updated list of available packages in /var/opkg-lists/openwrt_packages
623 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
624 Signature check passed.
625 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
626 Updated list of available packages in /var/opkg-lists/openwrt_routing
627 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
628 Signature check passed.
629 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
630 Updated list of available packages in /var/opkg-lists/openwrt_telephony
631 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
632 Signature check passed.
633 root@OpenWrt:/etc# opkg install luci
634 Installing luci (git-19.241.65047-dffe9ca-1) to root...
635 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
636 Installing uhttpd (2019-08-17-6b03f960-3) to root...
637 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
638 Installing liblua5.1.5 (5.1.5-5) to root...
639 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
640 Installing lua (5.1.5-5) to root...
641 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
642 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
643 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
644 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
645 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
646 Installing rpcd (2019-06-05-89bfaa42-3) to root...
647 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
648 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
649 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
650 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
651 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
652 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
653 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
654 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
655 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
656 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
657 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
658 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
659 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
660 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
661 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
662 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
663 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
664 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
665 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
666 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
667 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
668 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
669 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
670 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
671 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
672 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
673 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
674 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
675 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
676 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
677 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
678 Installing rpcd-mod-rrdns (20170710) to root...
679 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
680 Configuring liblucihttp0.
681 Configuring luci-app-opkg.
682 Configuring rpcd.
683 Configuring liblua5.1.5.
684 Configuring luci-lib-ip.
685 Configuring libubus-lua.
686 Configuring libiwinfo-lua.
687 Configuring lua.
688 Configuring luci-lib-nixio.
689 Configuring luci-lib-jsonc.
690 Configuring liblucihttp-lua.
691 Configuring luci-base.
692 Configuring luci-mod-system.
693 Configuring luci-theme-bootstrap.
694 Configuring luci-mod-status.
695 Configuring luci-app-firewall.
696 Configuring luci-proto-ppp.
697 Configuring luci-mod-network.
698 Configuring luci-mod-admin-full.
699 Configuring luci-proto-ipv6.
700 Configuring uhttpd.
701 Configuring rpcd-mod-rrdns.
702 Configuring luci.
703 root@OpenWrt:/etc# df -h
704 Filesystem Size Used Available Use% Mounted on
705 /dev/root 2.8M 2.8M 0 100% /rom
706 tmpfs 123.5M 764.0K 122.8M 1% /tmp
707 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
708 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
709 tmpfs 512.0K 0 512.0K 0% /dev
710 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
711 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
712 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
713 [ 2075.984368] device wlan0 entered promiscuous mode
714 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
715 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
716 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
717 [ 2096.494533] device wlan0 left promiscuous mode
718 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
719 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
720 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
721 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
722 [ 2097.404922] device wlan0 entered promiscuous mode
723 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
724 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
725 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
726 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
727 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
728 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
729 [ 2117.964353] device wlan0 left promiscuous mode
730 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
731 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
732 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
733 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
734 [ 2118.804171] device wlan0 entered promiscuous mode
735 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
736 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
737 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
738 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
739 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
740 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
741 [ 2245.748473] device wlan0 left promiscuous mode
742 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
743 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
744 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
745 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
746 [ 2246.557667] device wlan0 entered promiscuous mode
747 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
748 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
749 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
750 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
751 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
752 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
753
754 root@OpenWrt:/etc#
755 root@OpenWrt:/etc# uci show wireless
756 wireless.radio0=wifi-device
757 wireless.radio0.type='mac80211'
758 wireless.radio0.channel='11'
759 wireless.radio0.hwmode='11g'
760 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
761 wireless.radio0.country='00'
762 wireless.radio0.legacy_rates='1'
763 wireless.radio0.htmode='HT20'
764 wireless.default_radio0=wifi-iface
765 wireless.default_radio0.device='radio0'
766 wireless.default_radio0.network='lan'
767 wireless.default_radio0.mode='ap'
768 wireless.default_radio0.encryption='psk2'
769 wireless.default_radio0.key='qwerty1234'
770 wireless.default_radio0.ssid='asdf'
771 wireless.radio1=wifi-device
772 wireless.radio1.type='mac80211'
773 wireless.radio1.channel='36'
774 wireless.radio1.hwmode='11a'
775 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
776 wireless.radio1.htmode='VHT80'
777 wireless.radio1.__toggle='Enable'
778 wireless.radio1.country='00'
779 wireless.radio1.legacy_rates='1'
780 wireless.default_radio1=wifi-iface
781 wireless.default_radio1.device='radio1'
782 wireless.default_radio1.network='lan'
783 wireless.default_radio1.mode='ap'
784 wireless.default_radio1.ssid='asdf'
785 wireless.default_radio1.encryption='psk2'
786 wireless.default_radio1.key='qwerty1234'
787 root@OpenWrt:/etc#
788 {{/code}}
789
790 Firmware:
791
792 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin