Wiki source code of Orange Pi Zero Armbian Dmesg
Last modified by Leon Poon on 2018/12/24 21:04
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
3.1 | 1 | {{toc/}} |
| |
1.1 | 2 | |
| 3 | = Mainline Kernel = | ||
| 4 | |||
| 5 | https://dl.armbian.com/orangepizero/archive/Armbian_5.35_Orangepizero_Debian_jessie_next_4.13.16.7z | ||
| 6 | |||
| 7 | {{code language="plain"}} | ||
| 8 | [ 0.000000] Booting Linux on physical CPU 0x0 | ||
| 9 | [ 0.000000] random: get_random_bytes called from start_kernel+0x31/0x352 with crng_init=0 | ||
| 10 | [ 0.000000] Linux version 4.13.16-sunxi (root@armbian) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08)) #20 SMP Fri Nov 24 19:50:07 CET 2017 | ||
| 11 | [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=50c5387d | ||
| 12 | [ 0.000000] CPU: div instructions available: patching division code | ||
| 13 | [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | ||
| 14 | [ 0.000000] OF: fdt: Machine model: Xunlong Orange Pi Zero | ||
| 15 | [ 0.000000] Memory policy: Data cache writealloc | ||
| 16 | [ 0.000000] Reserved memory: created CMA memory pool at 0x5bc00000, size 64 MiB | ||
| 17 | [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool | ||
| 18 | [ 0.000000] On node 0 totalpages: 131072 | ||
| 19 | [ 0.000000] free_area_init_node: node 0, pgdat c0dcf000, node_mem_map db780000 | ||
| 20 | [ 0.000000] Normal zone: 1152 pages used for memmap | ||
| 21 | [ 0.000000] Normal zone: 0 pages reserved | ||
| 22 | [ 0.000000] Normal zone: 131072 pages, LIFO batch:31 | ||
| 23 | [ 0.000000] psci: probing for conduit method from DT. | ||
| 24 | [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT | ||
| 25 | [ 0.000000] percpu: Embedded 17 pages/cpu @dff5b000 s39948 r8192 d21492 u69632 | ||
| 26 | [ 0.000000] pcpu-alloc: s39948 r8192 d21492 u69632 alloc=17*4096 | ||
| 27 | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | ||
| 28 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 | ||
| 29 | [ 0.000000] Kernel command line: root=UUID=374d182b-7b9e-4570-b7c5-519a1eb837a7 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=27ee9213-01 ubootsource=mmc usb-storage.quirks= sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 | ||
| 30 | [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) | ||
| 31 | [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | ||
| 32 | [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | ||
| 33 | [ 0.000000] allocated 524288 bytes of page_ext | ||
| 34 | [ 0.000000] Memory: 434316K/524288K available (8192K kernel code, 905K rwdata, 2284K rodata, 1024K init, 344K bss, 24436K reserved, 65536K cma-reserved, 0K highmem) | ||
| 35 | [ 0.000000] Virtual kernel memory layout: | ||
| 36 | vector : 0xffff0000 - 0xffff1000 ( 4 kB) | ||
| 37 | fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | ||
| 38 | vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) | ||
| 39 | lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) | ||
| 40 | pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | ||
| 41 | modules : 0xbf800000 - 0xbfe00000 ( 6 MB) | ||
| 42 | .text : 0xc0008000 - 0xc0900000 (9184 kB) | ||
| 43 | .init : 0xc0c00000 - 0xc0d00000 (1024 kB) | ||
| 44 | .data : 0xc0d00000 - 0xc0de24ec ( 906 kB) | ||
| 45 | .bss : 0xc0debf44 - 0xc0e42254 ( 345 kB) | ||
| 46 | [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | ||
| 47 | [ 0.000000] ftrace: allocating 36591 entries in 72 pages | ||
| 48 | [ 0.000000] Hierarchical RCU implementation. | ||
| 49 | [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | ||
| 50 | [ 0.000000] GIC: Using split EOI/Deactivate mode | ||
| 51 | [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | ||
| 52 | [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). | ||
| 53 | [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns | ||
| 54 | [ 0.000012] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns | ||
| 55 | [ 0.000028] Switching to timer-based delay loop, resolution 41ns | ||
| 56 | [ 0.000350] Console: colour dummy device 80x30 | ||
| 57 | [ 0.000371] console [tty1] enabled | ||
| 58 | [ 0.000408] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) | ||
| 59 | [ 0.000428] pid_max: default: 32768 minimum: 301 | ||
| 60 | [ 0.000746] Security Framework initialized | ||
| 61 | [ 0.000763] AppArmor: AppArmor disabled by boot time parameter | ||
| 62 | [ 0.000853] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | ||
| 63 | [ 0.000869] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | ||
| 64 | [ 0.002095] CPU: Testing write buffer coherency: ok | ||
| 65 | [ 0.002671] /cpus/cpu@0 missing clock-frequency property | ||
| 66 | [ 0.002706] /cpus/cpu@1 missing clock-frequency property | ||
| 67 | [ 0.002741] /cpus/cpu@2 missing clock-frequency property | ||
| 68 | [ 0.002777] /cpus/cpu@3 missing clock-frequency property | ||
| 69 | [ 0.002795] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | ||
| 70 | [ 0.003407] Setting up static identity map for 0x40100000 - 0x40100054 | ||
| 71 | [ 0.003601] Hierarchical SRCU implementation. | ||
| 72 | [ 0.004859] smp: Bringing up secondary CPUs ... | ||
| 73 | [ 0.015940] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | ||
| 74 | [ 0.027144] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | ||
| 75 | [ 0.038272] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | ||
| 76 | [ 0.038408] smp: Brought up 1 node, 4 CPUs | ||
| 77 | [ 0.038421] SMP: Total of 4 processors activated (192.00 BogoMIPS). | ||
| 78 | [ 0.038427] CPU: All CPU(s) started in HYP mode. | ||
| 79 | [ 0.038432] CPU: Virtualization extensions available. | ||
| 80 | [ 0.040000] devtmpfs: initialized | ||
| 81 | [ 0.055347] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 | ||
| 82 | [ 0.055853] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | ||
| 83 | [ 0.055880] futex hash table entries: 1024 (order: 4, 65536 bytes) | ||
| 84 | [ 0.060670] xor: measuring software checksum speed | ||
| 85 | [ 0.158132] arm4regs : 598.000 MB/sec | ||
| 86 | [ 0.258257] 8regs : 356.400 MB/sec | ||
| 87 | [ 0.358384] 32regs : 364.800 MB/sec | ||
| 88 | [ 0.458508] neon : 605.600 MB/sec | ||
| 89 | [ 0.458516] xor: using function: neon (605.600 MB/sec) | ||
| 90 | [ 0.458693] pinctrl core: initialized pinctrl subsystem | ||
| 91 | [ 0.460357] NET: Registered protocol family 16 | ||
| 92 | [ 0.464598] DMA: preallocated 2048 KiB pool for atomic coherent allocations | ||
| 93 | [ 0.467180] cpuidle: using governor ladder | ||
| 94 | [ 0.467236] cpuidle: using governor menu | ||
| 95 | [ 0.469024] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | ||
| 96 | [ 0.469033] hw-breakpoint: maximum watchpoint size is 8 bytes. | ||
| 97 | [ 0.669358] raid6: int32x1 gen() 90 MB/s | ||
| 98 | [ 0.839465] raid6: int32x1 xor() 76 MB/s | ||
| 99 | [ 1.009445] raid6: int32x2 gen() 121 MB/s | ||
| 100 | [ 1.179490] raid6: int32x2 xor() 92 MB/s | ||
| 101 | [ 1.350129] raid6: int32x4 gen() 123 MB/s | ||
| 102 | [ 1.520089] raid6: int32x4 xor() 91 MB/s | ||
| 103 | [ 1.690478] raid6: int32x8 gen() 117 MB/s | ||
| 104 | [ 1.860522] raid6: int32x8 xor() 82 MB/s | ||
| 105 | [ 2.030496] raid6: neonx1 gen() 235 MB/s | ||
| 106 | [ 2.200611] raid6: neonx1 xor() 174 MB/s | ||
| 107 | [ 2.370818] raid6: neonx2 gen() 316 MB/s | ||
| 108 | [ 2.540975] raid6: neonx2 xor() 227 MB/s | ||
| 109 | [ 2.711202] raid6: neonx4 gen() 378 MB/s | ||
| 110 | [ 2.881347] raid6: neonx4 xor() 253 MB/s | ||
| 111 | [ 3.051582] raid6: neonx8 gen() 335 MB/s | ||
| 112 | [ 3.221784] raid6: neonx8 xor() 231 MB/s | ||
| 113 | [ 3.221792] raid6: using algorithm neonx4 gen() 378 MB/s | ||
| 114 | [ 3.221798] raid6: .... xor() 253 MB/s, rmw enabled | ||
| 115 | [ 3.221804] raid6: using intx1 recovery algorithm | ||
| 116 | [ 3.224855] SCSI subsystem initialized | ||
| 117 | [ 3.225197] libata version 3.00 loaded. | ||
| 118 | [ 3.225612] usbcore: registered new interface driver usbfs | ||
| 119 | [ 3.225719] usbcore: registered new interface driver hub | ||
| 120 | [ 3.225850] usbcore: registered new device driver usb | ||
| 121 | [ 3.226180] media: Linux media interface: v0.10 | ||
| 122 | [ 3.226249] Linux video capture interface: v2.00 | ||
| 123 | [ 3.226368] pps_core: LinuxPPS API ver. 1 registered | ||
| 124 | [ 3.226377] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | ||
| 125 | [ 3.226424] PTP clock support registered | ||
| 126 | [ 3.229086] clocksource: Switched to clocksource arch_sys_counter | ||
| 127 | [ 3.414466] VFS: Disk quotas dquot_6.6.0 | ||
| 128 | [ 3.414596] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | ||
| 129 | [ 3.433571] NET: Registered protocol family 2 | ||
| 130 | [ 3.434654] TCP established hash table entries: 4096 (order: 2, 16384 bytes) | ||
| 131 | [ 3.434751] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) | ||
| 132 | [ 3.434873] TCP: Hash tables configured (established 4096 bind 4096) | ||
| 133 | [ 3.435025] UDP hash table entries: 256 (order: 1, 8192 bytes) | ||
| 134 | [ 3.435078] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | ||
| 135 | [ 3.435412] NET: Registered protocol family 1 | ||
| 136 | [ 3.436130] RPC: Registered named UNIX socket transport module. | ||
| 137 | [ 3.436140] RPC: Registered udp transport module. | ||
| 138 | [ 3.436145] RPC: Registered tcp transport module. | ||
| 139 | [ 3.436152] RPC: Registered tcp NFSv4.1 backchannel transport module. | ||
| 140 | [ 3.436560] Trying to unpack rootfs image as initramfs... | ||
| 141 | [ 3.964744] Freeing initrd memory: 4320K | ||
| 142 | [ 3.967899] audit: initializing netlink subsys (disabled) | ||
| 143 | [ 3.968314] audit: type=2000 audit(3.949:1): state=initialized audit_enabled=0 res=1 | ||
| 144 | [ 3.968833] Initialise system trusted keyrings | ||
| 145 | [ 3.969194] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | ||
| 146 | [ 3.986649] zbud: loaded | ||
| 147 | [ 3.992623] NFS: Registering the id_resolver key type | ||
| 148 | [ 3.992668] Key type id_resolver registered | ||
| 149 | [ 3.992675] Key type id_legacy registered | ||
| 150 | [ 3.992696] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | ||
| 151 | [ 3.992704] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). | ||
| 152 | [ 3.995192] JFS: nTxBlock = 3938, nTxLock = 31510 | ||
| 153 | [ 4.003072] SGI XFS with ACLs, security attributes, realtime, no debug enabled | ||
| 154 | [ 4.008858] random: fast init done | ||
| 155 | [ 4.017311] Key type asymmetric registered | ||
| 156 | [ 4.017480] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) | ||
| 157 | [ 4.017677] io scheduler noop registered | ||
| 158 | [ 4.017685] io scheduler deadline registered | ||
| 159 | [ 4.018369] io scheduler cfq registered (default) | ||
| 160 | [ 4.018377] io scheduler mq-deadline registered | ||
| 161 | [ 4.018385] io scheduler kyber registered | ||
| 162 | [ 4.018714] io scheduler bfq registered | ||
| 163 | [ 4.030177] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver | ||
| 164 | [ 4.033681] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver | ||
| 165 | [ 4.150884] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled | ||
| 166 | [ 4.158431] console [ttyS0] disabled | ||
| 167 | [ 4.178675] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 39, base_baud = 1500000) is a U6_16550A | ||
| 168 | [ 4.178767] console [ttyS0] enabled | ||
| 169 | [ 4.185888] brd: module loaded | ||
| 170 | [ 4.198417] loop: module loaded | ||
| 171 | [ 4.201518] libphy: Fixed MDIO Bus: probed | ||
| 172 | [ 4.202454] dwmac-sun8i 1c30000.ethernet: PTP uses main clock | ||
| 173 | [ 4.202528] dwmac-sun8i 1c30000.ethernet: No regulator found | ||
| 174 | [ 4.202604] dwmac-sun8i 1c30000.ethernet: Will use internal PHY | ||
| 175 | [ 4.202701] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 148000 (expect 58000) | ||
| 176 | [ 4.202880] dwmac-sun8i 1c30000.ethernet: Chain mode enabled | ||
| 177 | [ 4.202892] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported | ||
| 178 | [ 4.202903] dwmac-sun8i 1c30000.ethernet: Normal descriptors | ||
| 179 | [ 4.202915] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported | ||
| 180 | [ 4.202926] dwmac-sun8i 1c30000.ethernet: COE Type 2 | ||
| 181 | [ 4.202937] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported | ||
| 182 | [ 4.203144] libphy: stmmac: probed | ||
| 183 | [ 4.212842] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | ||
| 184 | [ 4.212856] ehci-platform: EHCI generic platform driver | ||
| 185 | [ 4.213289] ehci-platform 1c1a000.usb: EHCI Host Controller | ||
| 186 | [ 4.213343] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1 | ||
| 187 | [ 4.214767] ehci-platform 1c1a000.usb: irq 26, io mem 0x01c1a000 | ||
| 188 | [ 4.239114] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00 | ||
| 189 | [ 4.239630] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | ||
| 190 | [ 4.239645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
| 191 | [ 4.239657] usb usb1: Product: EHCI Host Controller | ||
| 192 | [ 4.239669] usb usb1: Manufacturer: Linux 4.13.16-sunxi ehci_hcd | ||
| 193 | [ 4.239680] usb usb1: SerialNumber: 1c1a000.usb | ||
| 194 | [ 4.240916] hub 1-0:1.0: USB hub found | ||
| 195 | [ 4.241000] hub 1-0:1.0: 1 port detected | ||
| 196 | [ 4.242381] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | ||
| 197 | [ 4.242419] ohci-platform: OHCI generic platform driver | ||
| 198 | [ 4.242774] ohci-platform 1c1a400.usb: Generic Platform OHCI controller | ||
| 199 | [ 4.242824] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2 | ||
| 200 | [ 4.243211] ohci-platform 1c1a400.usb: irq 27, io mem 0x01c1a400 | ||
| 201 | [ 4.313555] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 | ||
| 202 | [ 4.313570] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
| 203 | [ 4.313582] usb usb2: Product: Generic Platform OHCI controller | ||
| 204 | [ 4.313594] usb usb2: Manufacturer: Linux 4.13.16-sunxi ohci_hcd | ||
| 205 | [ 4.313605] usb usb2: SerialNumber: 1c1a400.usb | ||
| 206 | [ 4.314778] hub 2-0:1.0: USB hub found | ||
| 207 | [ 4.314863] hub 2-0:1.0: 1 port detected | ||
| 208 | [ 4.316396] usbcore: registered new interface driver usb-storage | ||
| 209 | [ 4.317574] mousedev: PS/2 mouse device common for all mice | ||
| 210 | [ 4.318565] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0 | ||
| 211 | [ 4.318578] sun6i-rtc 1f00000.rtc: RTC enabled | ||
| 212 | [ 4.318912] i2c /dev entries driver | ||
| 213 | [ 4.322298] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) | ||
| 214 | [ 4.324658] sunxi-mmc 1c0f000.mmc: Got CD GPIO | ||
| 215 | [ 4.379139] sunxi-mmc 1c0f000.mmc: base:0xe0c99000 irq:23 | ||
| 216 | [ 4.381450] ledtrig-cpu: registered to indicate activity on CPUs | ||
| 217 | [ 4.381606] hidraw: raw HID events driver (C) Jiri Kosina | ||
| 218 | [ 4.381875] usbcore: registered new interface driver usbhid | ||
| 219 | [ 4.381881] usbhid: USB HID core driver | ||
| 220 | [ 4.384805] NET: Registered protocol family 10 | ||
| 221 | [ 4.411633] Segment Routing with IPv6 | ||
| 222 | [ 4.411806] NET: Registered protocol family 17 | ||
| 223 | [ 4.411958] Key type dns_resolver registered | ||
| 224 | [ 4.412749] Registering SWP/SWPB emulation handler | ||
| 225 | [ 4.413841] registered taskstats version 1 | ||
| 226 | [ 4.413850] Loading compiled-in X.509 certificates | ||
| 227 | [ 4.413984] zswap: loaded using pool lzo/zbud | ||
| 228 | [ 4.417416] Btrfs loaded, crc32c=crc32c-generic | ||
| 229 | [ 4.426494] mmc0: host does not support reading read-only switch, assuming write-enable | ||
| 230 | [ 4.428685] mmc0: new high speed SDHC card at address 0002 | ||
| 231 | [ 4.429897] mmcblk0: mmc0:0002 00000 3.70 GiB | ||
| 232 | [ 4.430641] Key type encrypted registered | ||
| 233 | [ 4.431857] mmcblk0: p1 | ||
| 234 | [ 4.444582] ehci-platform 1c1b000.usb: EHCI Host Controller | ||
| 235 | [ 4.444654] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3 | ||
| 236 | [ 4.445034] ehci-platform 1c1b000.usb: irq 28, io mem 0x01c1b000 | ||
| 237 | [ 4.479130] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 | ||
| 238 | [ 4.479524] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 | ||
| 239 | [ 4.479539] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
| 240 | [ 4.479550] usb usb3: Product: EHCI Host Controller | ||
| 241 | [ 4.479562] usb usb3: Manufacturer: Linux 4.13.16-sunxi ehci_hcd | ||
| 242 | [ 4.479573] usb usb3: SerialNumber: 1c1b000.usb | ||
| 243 | [ 4.480860] hub 3-0:1.0: USB hub found | ||
| 244 | [ 4.480937] hub 3-0:1.0: 1 port detected | ||
| 245 | [ 4.482260] ehci-platform 1c1c000.usb: EHCI Host Controller | ||
| 246 | [ 4.482307] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4 | ||
| 247 | [ 4.482665] ehci-platform 1c1c000.usb: irq 30, io mem 0x01c1c000 | ||
| 248 | [ 4.509112] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 | ||
| 249 | [ 4.509500] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 | ||
| 250 | [ 4.509515] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
| 251 | [ 4.509526] usb usb4: Product: EHCI Host Controller | ||
| 252 | [ 4.509538] usb usb4: Manufacturer: Linux 4.13.16-sunxi ehci_hcd | ||
| 253 | [ 4.509549] usb usb4: SerialNumber: 1c1c000.usb | ||
| 254 | [ 4.510739] hub 4-0:1.0: USB hub found | ||
| 255 | [ 4.510805] hub 4-0:1.0: 1 port detected | ||
| 256 | [ 4.512072] ehci-platform 1c1d000.usb: EHCI Host Controller | ||
| 257 | [ 4.512119] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5 | ||
| 258 | [ 4.512419] ehci-platform 1c1d000.usb: irq 32, io mem 0x01c1d000 | ||
| 259 | [ 4.539124] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00 | ||
| 260 | [ 4.539458] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 | ||
| 261 | [ 4.539472] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
| 262 | [ 4.539483] usb usb5: Product: EHCI Host Controller | ||
| 263 | [ 4.539495] usb usb5: Manufacturer: Linux 4.13.16-sunxi ehci_hcd | ||
| 264 | [ 4.539506] usb usb5: SerialNumber: 1c1d000.usb | ||
| 265 | [ 4.540795] hub 5-0:1.0: USB hub found | ||
| 266 | [ 4.540879] hub 5-0:1.0: 1 port detected | ||
| 267 | [ 4.542141] ohci-platform 1c1b400.usb: Generic Platform OHCI controller | ||
| 268 | [ 4.542189] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6 | ||
| 269 | [ 4.542421] ohci-platform 1c1b400.usb: irq 29, io mem 0x01c1b400 | ||
| 270 | [ 4.613418] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 | ||
| 271 | [ 4.613434] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
| 272 | [ 4.613446] usb usb6: Product: Generic Platform OHCI controller | ||
| 273 | [ 4.613457] usb usb6: Manufacturer: Linux 4.13.16-sunxi ohci_hcd | ||
| 274 | [ 4.613469] usb usb6: SerialNumber: 1c1b400.usb | ||
| 275 | [ 4.614704] hub 6-0:1.0: USB hub found | ||
| 276 | [ 4.614770] hub 6-0:1.0: 1 port detected | ||
| 277 | [ 4.615991] ohci-platform 1c1c400.usb: Generic Platform OHCI controller | ||
| 278 | [ 4.616034] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7 | ||
| 279 | [ 4.616266] ohci-platform 1c1c400.usb: irq 31, io mem 0x01c1c400 | ||
| 280 | [ 4.683413] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 | ||
| 281 | [ 4.683428] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
| 282 | [ 4.683440] usb usb7: Product: Generic Platform OHCI controller | ||
| 283 | [ 4.683452] usb usb7: Manufacturer: Linux 4.13.16-sunxi ohci_hcd | ||
| 284 | [ 4.683463] usb usb7: SerialNumber: 1c1c400.usb | ||
| 285 | [ 4.684418] hub 7-0:1.0: USB hub found | ||
| 286 | [ 4.684486] hub 7-0:1.0: 1 port detected | ||
| 287 | [ 4.685591] ohci-platform 1c1d400.usb: Generic Platform OHCI controller | ||
| 288 | [ 4.685637] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8 | ||
| 289 | [ 4.685874] ohci-platform 1c1d400.usb: irq 33, io mem 0x01c1d400 | ||
| 290 | [ 4.753421] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 | ||
| 291 | [ 4.753436] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | ||
| 292 | [ 4.753448] usb usb8: Product: Generic Platform OHCI controller | ||
| 293 | [ 4.753459] usb usb8: Manufacturer: Linux 4.13.16-sunxi ohci_hcd | ||
| 294 | [ 4.753470] usb usb8: SerialNumber: 1c1d400.usb | ||
| 295 | [ 4.754494] hub 8-0:1.0: USB hub found | ||
| 296 | [ 4.754561] hub 8-0:1.0: 1 port detected | ||
| 297 | [ 4.755804] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator | ||
| 298 | [ 4.759527] core: _opp_supported_by_regulators: OPP minuV: 1320000 maxuV: 1320000, not supported by regulator | ||
| 299 | [ 4.759547] cpu cpu0: _opp_add: OPP not supported by regulators (1296000000) | ||
| 300 | [ 4.760326] thermal thermal_zone0: binding zone cpu-thermal with cdev thermal-cpufreq-0 failed:-17 | ||
| 301 | [ 4.768455] of_cfs_init | ||
| 302 | [ 4.768543] of_cfs_init: OK | ||
| 303 | [ 4.768666] vdd-cpux-dummy: disabling | ||
| 304 | [ 4.768671] vcc3v0: disabling | ||
| 305 | [ 4.768676] vcc5v0: disabling | ||
| 306 | [ 4.768679] vcc-wifi: disabling | ||
| 307 | [ 4.771884] Freeing unused kernel memory: 1024K | ||
| 308 | [ 4.806119] systemd-udevd[143]: starting version 215 | ||
| 309 | [ 4.932864] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq | ||
| 310 | [ 5.209099] sunxi-mmc 1c10000.mmc: base:0xe0d26000 irq:24 | ||
| 311 | [ 5.227754] mmc1: new high speed SDIO card at address 0001 | ||
| 312 | [ 5.628778] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) | ||
| 313 | [ 6.014746] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) | ||
| 314 | [ 6.015045] systemd[1]: Detected architecture 'arm'. | ||
| 315 | [ 6.070685] systemd[1]: Set hostname to <orangepizero>. | ||
| 316 | [ 6.464059] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. | ||
| 317 | [ 6.466520] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. | ||
| 318 | [ 6.466896] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | ||
| 319 | [ 6.466963] systemd[1]: Expecting device dev-ttyGS0.device... | ||
| 320 | [ 6.489246] systemd[1]: Expecting device dev-ttyS0.device... | ||
| 321 | [ 6.519146] systemd[1]: Starting Remote File Systems (Pre). | ||
| 322 | [ 6.549127] systemd[1]: Reached target Remote File Systems (Pre). | ||
| 323 | [ 7.263783] fuse init (API version 7.26) | ||
| 324 | [ 7.287174] g_serial gadget: Gadget Serial v2.4 | ||
| 325 | [ 7.287182] g_serial gadget: g_serial ready | ||
| 326 | [ 8.348190] systemd-udevd[263]: starting version 215 | ||
| 327 | [ 8.935648] thermal thermal_zone0: failed to read out thermal zone (-110) | ||
| 328 | [ 9.373120] random: crng init done | ||
| 329 | [ 9.498242] xradio_wlan mmc1:0001:1: missed interrupt | ||
| 330 | [ 9.498444] xradio_wlan mmc1:0001:1: Input buffers: 30 x 1632 bytes | ||
| 331 | Hardware: 7.9 | ||
| 332 | WSM firmware ver: 8, build: 43, api: 1060, cap: 0x0003 | ||
| 333 | [ 9.498458] xradio_wlan mmc1:0001:1: Firmware Label:XR_C01.08.0043 Jun 6 2016 20:41:04 | ||
| 334 | [ 9.500271] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' | ||
| 335 | [ 10.009263] thermal thermal_zone0: failed to read out thermal zone (-110) | ||
| 336 | [ 11.049209] thermal thermal_zone0: failed to read out thermal zone (-110) | ||
| 337 | [ 14.559251] systemd[1]: Started LSB: Set preliminary keymap. | ||
| 338 | [ 14.565589] systemd[1]: Starting Remount Root and Kernel File Systems... | ||
| 339 | [ 14.663755] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro | ||
| 340 | [ 14.689331] systemd[1]: Started Remount Root and Kernel File Systems. | ||
| 341 | [ 14.695631] systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill0... | ||
| 342 | [ 14.722532] systemd[1]: Starting Various fixups to make systemd work better on Debian... | ||
| 343 | [ 14.762412] systemd[1]: Starting Load/Save Random Seed... | ||
| 344 | [ 14.792121] systemd[1]: Starting Local File Systems (Pre). | ||
| 345 | [ 14.819280] systemd[1]: Reached target Local File Systems (Pre). | ||
| 346 | [ 14.819524] systemd[1]: Mounting /tmp... | ||
| 347 | [ 14.889282] systemd[1]: Started Load/Save RF Kill Switch Status of rfkill0. | ||
| 348 | [ 15.696916] systemd-journald[451]: Received request to flush runtime journal from PID 1 | ||
| 349 | [ 15.792823] Generic PHY stmmac-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=stmmac-0:01, irq=-1) | ||
| 350 | [ 15.795067] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available | ||
| 351 | [ 15.795083] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW | ||
| 352 | [ 15.795394] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | ||
| 353 | [ 18.889847] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx | ||
| 354 | [ 18.889942] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready | ||
| 355 | [ 21.463551] EXT4-fs (mmcblk0p1): resizing filesystem from 296960 to 918016 blocks | ||
| 356 | [ 22.704657] EXT4-fs (mmcblk0p1): resized filesystem to 918016 | ||
| 357 | [ 29.193386] ieee80211 phy0: Interface ID:0 of type:2 added | ||
| 358 | [ 29.194244] ieee80211 phy0: vif 0, configuring tx | ||
| 359 | [ 29.194879] ieee80211 phy0: vif 0, configuring tx | ||
| 360 | [ 29.195421] ieee80211 phy0: vif 0, configuring tx | ||
| 361 | [ 29.195887] ieee80211 phy0: vif 0, configuring tx | ||
| 362 | [ 29.196366] ieee80211 phy0: ignore IEEE80211_CONF_CHANGE_MONITOR (1)IEEE80211_CONF_CHANGE_IDLE (1) | ||
| 363 | [ 42.751995] Adding 131068k swap on /var/swap. Priority:-1 extents:1 across:131068k SSFS | ||
| 364 | {{/code}} | ||
| 365 | |||
| 366 | = Sunxi (Legacy) Kernel = | ||
| 367 | |||
| 368 | https://dl.armbian.com/orangepizero/archive/Armbian_5.35_Orangepizero_Debian_jessie_default_3.4.113.7z | ||
| 369 | |||
| 370 | {{code language="plain"}} | ||
| 371 | [ 0.000000] Booting Linux on physical CPU 0 | ||
| 372 | [ 0.000000] Initializing cgroup subsys cpuset | ||
| 373 | [ 0.000000] Initializing cgroup subsys cpu | ||
| 374 | [ 0.000000] Linux version 3.4.113-sun8i (root@armbian) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #4 SMP PREEMPT Wed Nov 22 13:45:28 CET 2017 | ||
| 375 | [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d | ||
| 376 | [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | ||
| 377 | [ 0.000000] Machine: sun8i | ||
| 378 | [ 0.000000] cma: dma_declare_contiguous(266): ION reserve size should be 4m align! adjust size to 128MBytes | ||
| 379 | [ 0.000000] cma: CMA: reserved 128 MiB at 58000000 | ||
| 380 | [ 0.000000] Memory policy: ECC disabled, Data cache writealloc | ||
| 381 | [ 0.000000] On node 0 totalpages: 131072 | ||
| 382 | [ 0.000000] free_area_init_node: node 0, pgdat c098f5c0, node_mem_map c0ac8000 | ||
| 383 | [ 0.000000] Normal zone: 1152 pages used for memmap | ||
| 384 | [ 0.000000] Normal zone: 0 pages reserved | ||
| 385 | [ 0.000000] Normal zone: 129920 pages, LIFO batch:31 | ||
| 386 | [ 0.000000] script_init enter! | ||
| 387 | [ 0.000000] script_init exit! | ||
| 388 | [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0f5a000 s11968 r8192 d12608 u32768 | ||
| 389 | [ 0.000000] pcpu-alloc: s11968 r8192 d12608 u32768 alloc=8*4096 | ||
| 390 | [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | ||
| 391 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 | ||
| 392 | [ 0.000000] Kernel command line: root=UUID=a604a1f2-389b-4f80-9a2f-5cb1ea59f2fa rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=100000f3-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1 | ||
| 393 | [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) | ||
| 394 | [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | ||
| 395 | [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | ||
| 396 | [ 0.000000] allocated 1048576 bytes of page_cgroup | ||
| 397 | [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups | ||
| 398 | [ 0.000000] Memory: 512MB = 512MB total | ||
| 399 | [ 0.000000] Memory: 371704k/371704k available, 152584k reserved, 0K highmem | ||
| 400 | [ 0.000000] Virtual kernel memory layout: | ||
| 401 | [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | ||
| 402 | [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | ||
| 403 | [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) | ||
| 404 | [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) | ||
| 405 | [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | ||
| 406 | [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | ||
| 407 | [ 0.000000] .text : 0xc0008000 - 0xc08d08ac (8995 kB) | ||
| 408 | [ 0.000000] .init : 0xc08d1000 - 0xc0923ec0 ( 332 kB) | ||
| 409 | [ 0.000000] .data : 0xc0924000 - 0xc0993e30 ( 448 kB) | ||
| 410 | [ 0.000000] .bss : 0xc09945e4 - 0xc0ac7a00 (1230 kB) | ||
| 411 | [ 0.000000] Preemptible hierarchical RCU implementation. | ||
| 412 | [ 0.000000] Additional per-CPU info printed with stalls. | ||
| 413 | [ 0.000000] NR_IRQS:544 | ||
| 414 | [ 0.000000] Architected local timer running at 24.00MHz. | ||
| 415 | [ 0.000000] Switching to timer-based delay loop | ||
| 416 | [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms | ||
| 417 | [ 0.000000] Console: colour dummy device 80x30 | ||
| 418 | [ 0.000000] console [tty1] enabled | ||
| 419 | [ 0.000500] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000) | ||
| 420 | [ 0.000548] pid_max: default: 32768 minimum: 301 | ||
| 421 | [ 0.000875] Security Framework initialized | ||
| 422 | [ 0.000924] AppArmor: AppArmor disabled by boot time parameter | ||
| 423 | [ 0.001300] Mount-cache hash table entries: 512 | ||
| 424 | [ 0.003285] Initializing cgroup subsys cpuacct | ||
| 425 | [ 0.003319] Initializing cgroup subsys memory | ||
| 426 | [ 0.003412] Initializing cgroup subsys devices | ||
| 427 | [ 0.003441] Initializing cgroup subsys freezer | ||
| 428 | [ 0.003465] Initializing cgroup subsys blkio | ||
| 429 | [ 0.003513] Initializing cgroup subsys perf_event | ||
| 430 | [ 0.003678] CPU: Testing write buffer coherency: ok | ||
| 431 | [ 0.003771] ftrace: allocating 24834 entries in 73 pages | ||
| 432 | [ 0.060578] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | ||
| 433 | [ 0.060614] [sunxi_smp_prepare_cpus] enter | ||
| 434 | [ 0.060685] Setting up static identity map for 0x4061edd8 - 0x4061ee30 | ||
| 435 | [ 0.062578] CPU1: Booted secondary processor | ||
| 436 | [ 0.062578] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | ||
| 437 | [ 0.070680] CPU2: Booted secondary processor | ||
| 438 | [ 0.070680] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | ||
| 439 | [ 0.070932] CPU3: Booted secondary processor | ||
| 440 | [ 0.070932] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | ||
| 441 | [ 0.080349] Brought up 4 CPUs | ||
| 442 | [ 0.080384] SMP: Total of 4 processors activated (19200.00 BogoMIPS). | ||
| 443 | [ 0.081796] devtmpfs: initialized | ||
| 444 | [ 0.096444] wakeup src cnt is : 2. | ||
| 445 | [ 0.096468] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000 | ||
| 446 | [ 0.096491] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0 | ||
| 447 | [ 0.096514] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40 | ||
| 448 | [ 0.096537] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000 | ||
| 449 | [ 0.096559] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x8 | ||
| 450 | [ 0.096581] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40 | ||
| 451 | [ 0.096605] sunxi pm init | ||
| 452 | [ 0.096893] pinctrl core: initialized pinctrl subsystem | ||
| 453 | [ 0.107360] NET: Registered protocol family 16 | ||
| 454 | [ 0.109458] DMA: preallocated 2048 KiB pool for atomic coherent allocations | ||
| 455 | [ 0.109458] script_sysfs_init success | ||
| 456 | [ 0.109458] sunxi_dump_init success | ||
| 457 | [ 0.109458] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl | ||
| 458 | [ 0.109458] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver | ||
| 459 | [ 0.109499] plat: add bmp085 device | ||
| 460 | [ 0.109525] plat: add pcf8591 device | ||
| 461 | [ 0.109617] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | ||
| 462 | [ 0.109643] hw-breakpoint: maximum watchpoint size is 8 bytes. | ||
| 463 | [ 0.110269] script config pll_video to 297 Mhz | ||
| 464 | [ 0.110303] script config pll_de to 864 Mhz | ||
| 465 | [ 0.110365] script config pll_ve to 402 Mhz | ||
| 466 | [ 0.110395] sunxi_default_clk_init | ||
| 467 | [ 0.110409] try to set pll6ahb1 to 200000000 | ||
| 468 | [ 0.110448] try to set ahb clk source to pll6ahb1 | ||
| 469 | [ 0.110466] set ahb clk source to pll6ahb1 | ||
| 470 | [ 0.110485] try to set ahb1 to 200000000 | ||
| 471 | [ 0.110507] try to set apb1 to 100000000 | ||
| 472 | [ 0.130478] bio: create slab <bio-0> at 0 | ||
| 473 | [ 0.130622] [ARISC] :sunxi-arisc driver v1.04 | ||
| 474 | [ 0.147861] [ARISC] :arisc version: [v0.1.58] | ||
| 475 | [ 0.256776] [ARISC] :sunxi-arisc driver v1.04 startup succeeded | ||
| 476 | [ 0.260892] SCSI subsystem initialized | ||
| 477 | [ 0.261306] usbcore: registered new interface driver usbfs | ||
| 478 | [ 0.261461] usbcore: registered new interface driver hub | ||
| 479 | [ 0.261509] usbcore: registered new device driver usb | ||
| 480 | [ 0.261509] twi_chan_cfg()340 - [twi0] has no twi_regulator. | ||
| 481 | [ 0.261509] twi_chan_cfg()340 - [twi1] has no twi_regulator. | ||
| 482 | [ 0.261509] twi_chan_cfg()340 - [twi2] has no twi_regulator. | ||
| 483 | [ 0.261825] Linux video capture interface: v2.00 | ||
| 484 | [ 0.262311] Advanced Linux Sound Architecture Driver Version 1.0.25. | ||
| 485 | [ 0.263814] cfg80211: Calling CRDA to update world regulatory domain | ||
| 486 | [ 0.270072] NetLabel: Initializing | ||
| 487 | [ 0.270072] NetLabel: domain hash size = 128 | ||
| 488 | [ 0.270080] NetLabel: protocols = UNLABELED CIPSOv4 | ||
| 489 | [ 0.270208] NetLabel: unlabeled traffic allowed by default | ||
| 490 | [ 0.271226] Switching to clocksource arch_sys_counter | ||
| 491 | [ 0.297127] FS-Cache: Loaded | ||
| 492 | [ 0.297691] CacheFiles: Loaded | ||
| 493 | [ 0.321365] NET: Registered protocol family 2 | ||
| 494 | [ 0.344839] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) | ||
| 495 | [ 0.345966] TCP established hash table entries: 16384 (order: 5, 131072 bytes) | ||
| 496 | [ 0.346481] TCP bind hash table entries: 16384 (order: 5, 196608 bytes) | ||
| 497 | [ 0.347056] TCP: Hash tables configured (established 16384 bind 16384) | ||
| 498 | [ 0.347078] TCP: reno registered | ||
| 499 | [ 0.347103] UDP hash table entries: 256 (order: 1, 8192 bytes) | ||
| 500 | [ 0.347157] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | ||
| 501 | [ 0.347820] NET: Registered protocol family 1 | ||
| 502 | [ 0.348634] RPC: Registered named UNIX socket transport module. | ||
| 503 | [ 0.348659] RPC: Registered udp transport module. | ||
| 504 | [ 0.348676] RPC: Registered tcp transport module. | ||
| 505 | [ 0.348694] RPC: Registered tcp NFSv4.1 backchannel transport module. | ||
| 506 | [ 0.349098] Trying to unpack rootfs image as initramfs... | ||
| 507 | [ 0.849759] Freeing initrd memory: 3720K | ||
| 508 | [ 0.851119] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available | ||
| 509 | [ 0.851362] sunxi_reg_init enter | ||
| 510 | [ 0.853177] audit: initializing netlink socket (disabled) | ||
| 511 | [ 0.853283] type=2000 audit(0.850:1): initialized | ||
| 512 | [ 0.856075] VFS: Disk quotas dquot_6.5.2 | ||
| 513 | [ 0.856463] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | ||
| 514 | [ 0.857602] squashfs: version 4.0 (2009/01/31) Phillip Lougher | ||
| 515 | [ 0.857962] misc fatfs initialized | ||
| 516 | [ 0.858392] NFS: Registering the id_resolver key type | ||
| 517 | [ 0.859170] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | ||
| 518 | [ 0.859198] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). | ||
| 519 | [ 0.860818] NTFS driver 2.1.30 [Flags: R/W]. | ||
| 520 | [ 0.861426] fuse init (API version 7.18) | ||
| 521 | [ 0.862260] msgmni has been set to 989 | ||
| 522 | [ 0.865203] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) | ||
| 523 | [ 0.865238] io scheduler noop registered | ||
| 524 | [ 0.865256] io scheduler deadline registered | ||
| 525 | [ 0.865386] io scheduler cfq registered (default) | ||
| 526 | [ 0.866208] [DISP]disp_module_init | ||
| 527 | [ 0.866821] cmdline,init_disp= | ||
| 528 | [ 0.866885] cmdline,disp= | ||
| 529 | [ 0.875793] [DISP] Fb_map_kernel_logo,line:932:Fb_map_kernel_logo failed! | ||
| 530 | [ 0.891927] Console: switching to colour frame buffer device 90x36 | ||
| 531 | [ 0.910247] [DISP]disp_module_init finish | ||
| 532 | [ 0.910708] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator. | ||
| 533 | [ 0.910741] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator. | ||
| 534 | [ 0.910771] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator. | ||
| 535 | [ 0.911691] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI | ||
| 536 | [ 0.911718] sw_uart_pm()890 - uart0 clk is already enable | ||
| 537 | [ 0.911755] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n | ||
| 538 | [ 0.912042] console [ttyS0] enabled | ||
| 539 | [ 0.912697] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI | ||
| 540 | [ 0.913218] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI | ||
| 541 | [ 0.914295] sunxi_cmatest_init enter | ||
| 542 | [ 0.914385] sunxi_cmatest_init success | ||
| 543 | [ 0.922927] brd: module loaded | ||
| 544 | [ 0.931223] loop: module loaded | ||
| 545 | [ 0.931785] sunxi_spi_chan_cfg()1376 - [spi-0] has no spi_regulator. | ||
| 546 | [ 0.931814] sunxi_spi_chan_cfg()1376 - [spi-1] has no spi_regulator. | ||
| 547 | [ 0.933146] spi spi0: master is unqueued, this is deprecated | ||
| 548 | [ 0.934341] spi spi1: master is unqueued, this is deprecated | ||
| 549 | [ 0.936319] PPP generic driver version 2.4.2 | ||
| 550 | [ 0.936696] PPP BSD Compression module registered | ||
| 551 | [ 0.936718] PPP Deflate Compression module registered | ||
| 552 | [ 0.942094] PPP MPPE Compression module registered | ||
| 553 | [ 0.942130] NET: Registered protocol family 24 | ||
| 554 | [ 0.942274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | ||
| 555 | [ 0.962471] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | ||
| 556 | [ 0.962545] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1 | ||
| 557 | [ 0.963634] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000 | ||
| 558 | [ 0.980074] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00 | ||
| 559 | [ 0.981342] hub 1-0:1.0: USB hub found | ||
| 560 | [ 0.981388] hub 1-0:1.0: 1 port detected | ||
| 561 | [ 1.002161] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | ||
| 562 | [ 1.002221] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2 | ||
| 563 | [ 1.003034] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000 | ||
| 564 | [ 1.020072] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00 | ||
| 565 | [ 1.021190] hub 2-0:1.0: USB hub found | ||
| 566 | [ 1.021244] hub 2-0:1.0: 1 port detected | ||
| 567 | [ 1.042067] sunxi-ehci sunxi-ehci.3: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | ||
| 568 | [ 1.042127] sunxi-ehci sunxi-ehci.3: new USB bus registered, assigned bus number 3 | ||
| 569 | [ 1.042917] sunxi-ehci sunxi-ehci.3: irq 108, io mem 0xf1c1c000 | ||
| 570 | [ 1.060062] sunxi-ehci sunxi-ehci.3: USB 0.0 started, EHCI 1.00 | ||
| 571 | [ 1.061176] hub 3-0:1.0: USB hub found | ||
| 572 | [ 1.061226] hub 3-0:1.0: 1 port detected | ||
| 573 | [ 1.061986] ehci_irq: highspeed device connect | ||
| 574 | [ 1.066349] ehci_irq: highspeed device disconnect | ||
| 575 | [ 1.081998] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver | ||
| 576 | [ 1.082058] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 4 | ||
| 577 | [ 1.082875] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000 | ||
| 578 | [ 1.100061] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00 | ||
| 579 | [ 1.101173] hub 4-0:1.0: USB hub found | ||
| 580 | [ 1.101222] hub 4-0:1.0: 1 port detected | ||
| 581 | [ 1.102019] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | ||
| 582 | [ 1.122161] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver | ||
| 583 | [ 1.122220] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 5 | ||
| 584 | [ 1.122285] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400 | ||
| 585 | [ 1.185190] hub 5-0:1.0: USB hub found | ||
| 586 | [ 1.185237] hub 5-0:1.0: 1 port detected | ||
| 587 | [ 1.186022] ehci_irq: highspeed device connect | ||
| 588 | [ 1.190386] ehci_irq: highspeed device disconnect | ||
| 589 | [ 1.206104] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver | ||
| 590 | [ 1.206161] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 6 | ||
| 591 | [ 1.206248] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400 | ||
| 592 | [ 1.265207] hub 6-0:1.0: USB hub found | ||
| 593 | [ 1.265244] hub 6-0:1.0: 1 port detected | ||
| 594 | [ 1.286121] sunxi-ohci sunxi-ohci.3: SW USB2.0 'Open' Host Controller (OHCI) Driver | ||
| 595 | [ 1.286178] sunxi-ohci sunxi-ohci.3: new USB bus registered, assigned bus number 7 | ||
| 596 | [ 1.286241] sunxi-ohci sunxi-ohci.3: irq 109, io mem 0xf1c1c400 | ||
| 597 | [ 1.345065] hub 7-0:1.0: USB hub found | ||
| 598 | [ 1.345101] hub 7-0:1.0: 1 port detected | ||
| 599 | [ 1.345779] ehci_irq: highspeed device connect | ||
| 600 | [ 1.350144] ehci_irq: highspeed device disconnect | ||
| 601 | [ 1.365833] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver | ||
| 602 | [ 1.365890] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 8 | ||
| 603 | [ 1.365964] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400 | ||
| 604 | [ 1.425069] hub 8-0:1.0: USB hub found | ||
| 605 | [ 1.425107] hub 8-0:1.0: 1 port detected | ||
| 606 | [ 1.425824] Initializing USB Mass Storage driver... | ||
| 607 | [ 1.426319] usbcore: registered new interface driver usb-storage | ||
| 608 | [ 1.426340] USB Mass Storage support registered. | ||
| 609 | [ 1.426454] usbcore: registered new interface driver ums-alauda | ||
| 610 | [ 1.426553] usbcore: registered new interface driver ums-cypress | ||
| 611 | [ 1.426657] usbcore: registered new interface driver ums-datafab | ||
| 612 | [ 1.426757] usbcore: registered new interface driver ums_eneub6250 | ||
| 613 | [ 1.426856] usbcore: registered new interface driver ums-freecom | ||
| 614 | [ 1.426961] usbcore: registered new interface driver ums-isd200 | ||
| 615 | [ 1.427063] usbcore: registered new interface driver ums-jumpshot | ||
| 616 | [ 1.427165] usbcore: registered new interface driver ums-karma | ||
| 617 | [ 1.427270] usbcore: registered new interface driver ums-onetouch | ||
| 618 | [ 1.427398] usbcore: registered new interface driver ums-realtek | ||
| 619 | [ 1.427516] usbcore: registered new interface driver ums-sddr09 | ||
| 620 | [ 1.427627] usbcore: registered new interface driver ums-sddr55 | ||
| 621 | [ 1.427733] usbcore: registered new interface driver ums-usbat | ||
| 622 | [ 1.428174] uinput result 0 , vmouse_init | ||
| 623 | [ 1.429476] mousedev: PS/2 mouse device common for all mice | ||
| 624 | [ 1.429945] sunxikbd_init failed. | ||
| 625 | [ 1.429969] sunxikbd_init failed. | ||
| 626 | [ 1.429992] ls_fetch_sysconfig_para: ls_unused. | ||
| 627 | [ 1.430062] ltr_init: ls_fetch_sysconfig_para err. | ||
| 628 | [ 1.430674] [RTC] WARNING: Rtc time will be wrong!! | ||
| 629 | [ 1.430695] [RTC] WARNING: use *internal OSC* as clock source | ||
| 630 | [ 1.431216] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0 | ||
| 631 | [ 1.431312] i2c /dev entries driver | ||
| 632 | [ 1.432127] sunxi cedar version 0.1 | ||
| 633 | [ 1.432216] [cedar]: install start!!! | ||
| 634 | [ 1.432588] [cedar]: install end!!! | ||
| 635 | [ 1.432930] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x18) | ||
| 636 | [ 1.433137] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x19) | ||
| 637 | [ 1.433340] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x1a) | ||
| 638 | [ 1.433542] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x29) | ||
| 639 | [ 1.433744] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2a) | ||
| 640 | [ 1.433947] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x2b) | ||
| 641 | [ 1.434149] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4c) | ||
| 642 | [ 1.434351] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4d) | ||
| 643 | [ 1.434552] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x4e) | ||
| 644 | [ 1.434791] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x18) | ||
| 645 | [ 1.435020] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x19) | ||
| 646 | [ 1.435247] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x1a) | ||
| 647 | [ 1.435475] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x29) | ||
| 648 | [ 1.435703] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2a) | ||
| 649 | [ 1.435933] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x2b) | ||
| 650 | [ 1.436161] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4c) | ||
| 651 | [ 1.436388] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4d) | ||
| 652 | [ 1.436617] sunxi_i2c_do_xfer()985 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x4e) | ||
| 653 | [ 1.436647] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0 | ||
| 654 | [ 1.436997] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf | ||
| 655 | [ 1.437285] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0) | ||
| 656 | [ 1.437316] wdt_enable, write reg 0xf1c20cb8 val 0x00000000 | ||
| 657 | [ 1.437341] timeout_to_interv, line 167 | ||
| 658 | [ 1.437360] interv_to_timeout, line 189 | ||
| 659 | [ 1.437380] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec | ||
| 660 | [ 1.438212] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com | ||
| 661 | [ 1.438626] calibrat: max_cpufreq 1008Mhz Type 1! | ||
| 662 | [ 1.438653] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq | ||
| 663 | [ 1.439312] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.111 2015-4-13 15:24) Compiled in Nov 22 2017 at 13:44:04 | ||
| 664 | [ 1.439377] [mmc]: get mmc0's sdc_power is null! | ||
| 665 | [ 1.439433] [mmc]: get mmc1's sdc_power is null! | ||
| 666 | [ 1.439453] [mmc]: get mmc1's 2xmode ok, val = 1 | ||
| 667 | [ 1.439472] [mmc]: get mmc1's ddrmode ok, val = 1 | ||
| 668 | [ 1.439505] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2 | ||
| 669 | [ 1.444250] [mmc]: sdc0 power_supply is null | ||
| 670 | [ 1.447037] no blue_led, ignore it! | ||
| 671 | [ 1.447519] Registered led device: red_led | ||
| 672 | [ 1.447763] Registered led device: green_led | ||
| 673 | [ 1.447796] no led_0, ignore it! | ||
| 674 | [ 1.447812] no led_1, ignore it! | ||
| 675 | [ 1.447827] no led_2, ignore it! | ||
| 676 | [ 1.447842] no led_3, ignore it! | ||
| 677 | [ 1.447856] no led_4, ignore it! | ||
| 678 | [ 1.447871] no led_5, ignore it! | ||
| 679 | [ 1.447886] no led_6, ignore it! | ||
| 680 | [ 1.447900] no led_7, ignore it! | ||
| 681 | [ 1.449535] usbcore: registered new interface driver usbhid | ||
| 682 | [ 1.449560] usbhid: USB HID core driver | ||
| 683 | [ 1.458112] asoc: sndcodec <-> sunxi-codec mapping ok | ||
| 684 | [ 1.460491] [DAUDIO]sunxi-daudio cannot find any using configuration for controllers, return directly! | ||
| 685 | [ 1.460880] [I2S]snddaudio cannot find any using configuration for controllers, return directly! | ||
| 686 | [ 1.460909] [DAUDIO0] driver not init,just return. | ||
| 687 | [ 1.468050] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok | ||
| 688 | [ 1.470841] oprofile: using arm/armv7-ca7 | ||
| 689 | [ 1.471200] u32 classifier | ||
| 690 | [ 1.471217] Performance counters on | ||
| 691 | [ 1.471231] input device check on | ||
| 692 | [ 1.471245] Actions configured | ||
| 693 | [ 1.471893] TCP: bic registered | ||
| 694 | [ 1.471915] TCP: cubic registered | ||
| 695 | [ 1.471932] TCP: westwood registered | ||
| 696 | [ 1.471948] TCP: highspeed registered | ||
| 697 | [ 1.471964] TCP: hybla registered | ||
| 698 | [ 1.471979] TCP: htcp registered | ||
| 699 | [ 1.471995] TCP: vegas registered | ||
| 700 | [ 1.472011] TCP: veno registered | ||
| 701 | [ 1.472027] TCP: scalable registered | ||
| 702 | [ 1.472043] TCP: lp registered | ||
| 703 | [ 1.472058] TCP: yeah registered | ||
| 704 | [ 1.472074] TCP: illinois registered | ||
| 705 | [ 1.472090] Initializing XFRM netlink socket | ||
| 706 | [ 1.472523] NET: Registered protocol family 10 | ||
| 707 | [ 1.474687] NET: Registered protocol family 17 | ||
| 708 | [ 1.474749] NET: Registered protocol family 15 | ||
| 709 | [ 1.474840] Registering the dns_resolver key type | ||
| 710 | [ 1.475988] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 | ||
| 711 | [ 1.476035] ThumbEE CPU extension supported. | ||
| 712 | [ 1.476086] Registering SWP/SWPB emulation handler | ||
| 713 | [ 1.477180] registered taskstats version 1 | ||
| 714 | [ 1.478720] cmdline,disp= | ||
| 715 | [ 1.479093] [DISP] disp_init_tv,line:539:screen 0 do not support TV TYPE! | ||
| 716 | [ 1.479131] [DISP] bsp_disp_tv_register,line:998:'ptv is null | ||
| 717 | [ 1.479154] tv registered!! | ||
| 718 | [ 1.479228] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr1<-->device1, type=2, mode=11 | ||
| 719 | [ 1.480665] ths_fetch_sysconfig_para: type err device_used = 1. | ||
| 720 | [ 1.483405] CPU Budget:corekeeper enabled | ||
| 721 | [ 1.483939] CPU Budget:Register notifier | ||
| 722 | [ 1.483968] CPU Budget:register Success | ||
| 723 | [ 1.483996] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0 | ||
| 724 | [ 1.490775] [rf_pm]: Did not config module_power1 in sys_config | ||
| 725 | [ 1.490805] [rf_pm]: Did not config module_power2 in sys_config | ||
| 726 | [ 1.490827] [rf_pm]: Did not config module_power3 in sys_config | ||
| 727 | [ 1.490848] [rf_pm]: mod has no chip_en gpio | ||
| 728 | [ 1.490866] [rf_pm]: regulator on. | ||
| 729 | [ 1.490896] [rf_pm]: set losc_out 32k out[wifi_pm]: set wl_reg_on 1 ! | ||
| 730 | [ 1.525376] mmc0: new high speed SDHC card at address 0002 | ||
| 731 | [ 1.526318] mmcblk0: mmc0:0002 00000 3.70 GiB | ||
| 732 | [ 1.528677] mmcblk0: p1 | ||
| 733 | [ 1.529823] mmcblk mmc0:0002: Card claimed for testing. | ||
| 734 | [ 1.529852] mmc0:0002: 00000 3.70 GiB | ||
| 735 | [ 1.591522] [wifi_pm]: get wifi_sdc_id failed | ||
| 736 | [ 1.593091] [mmc]: sdc1 power_supply is null | ||
| 737 | [ 1.648667] mmc1: new high speed SDIO card at address 0001 | ||
| 738 | [ 1.691685] [wifi_pm]: wifi gpio init is OK !! | ||
| 739 | [ 1.691796] [rfkill]: init no bt used in configuration | ||
| 740 | [ 1.691816] ALSA device list: | ||
| 741 | [ 1.691831] #0: audiocodec | ||
| 742 | [ 1.691846] #1: sndhdmi | ||
| 743 | [ 1.693586] Freeing init memory: 328K | ||
| 744 | [ 1.776635] systemd-udevd[96]: starting version 215 | ||
| 745 | [ 2.813270] Btrfs loaded | ||
| 746 | [ 3.516887] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) | ||
| 747 | [ 4.700629] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) | ||
| 748 | [ 4.701238] systemd[1]: Detected architecture 'arm'. | ||
| 749 | [ 4.742560] systemd[1]: Set hostname to <orangepizero>. | ||
| 750 | [ 5.254205] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. | ||
| 751 | [ 5.259781] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. | ||
| 752 | [ 5.260644] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | ||
| 753 | [ 5.260797] systemd[1]: Expecting device dev-ttyS0.device... | ||
| 754 | [ 5.280383] systemd[1]: Expecting device dev-ttyGS0.device... | ||
| 755 | [ 5.300266] systemd[1]: Starting Remote File Systems (Pre). | ||
| 756 | [ 5.320215] systemd[1]: Reached target Remote File Systems (Pre). | ||
| 757 | [ 5.320407] systemd[1]: Starting Encrypted Volumes. | ||
| 758 | [ 5.340204] systemd[1]: Reached target Encrypted Volumes. | ||
| 759 | [ 5.340393] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. | ||
| 760 | [ 5.340859] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | ||
| 761 | [ 5.340984] systemd[1]: Starting Paths. | ||
| 762 | [ 5.360220] systemd[1]: Reached target Paths. | ||
| 763 | [ 5.360484] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. | ||
| 764 | [ 5.380296] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | ||
| 765 | [ 5.380486] systemd[1]: Starting Root Slice. | ||
| 766 | [ 5.400243] systemd[1]: Created slice Root Slice. | ||
| 767 | [ 5.400377] systemd[1]: Starting Delayed Shutdown Socket. | ||
| 768 | [ 5.420254] systemd[1]: Listening on Delayed Shutdown Socket. | ||
| 769 | [ 5.420390] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. | ||
| 770 | [ 5.440242] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | ||
| 771 | [ 5.440376] systemd[1]: Starting Journal Socket (/dev/log). | ||
| 772 | [ 5.460236] systemd[1]: Listening on Journal Socket (/dev/log). | ||
| 773 | [ 5.460374] systemd[1]: Starting User and Session Slice. | ||
| 774 | [ 5.480282] systemd[1]: Created slice User and Session Slice. | ||
| 775 | [ 5.480463] systemd[1]: Starting udev Control Socket. | ||
| 776 | [ 5.500240] systemd[1]: Listening on udev Control Socket. | ||
| 777 | [ 5.500414] systemd[1]: Starting udev Kernel Socket. | ||
| 778 | [ 5.520239] systemd[1]: Listening on udev Kernel Socket. | ||
| 779 | [ 5.520420] systemd[1]: Starting Journal Socket. | ||
| 780 | [ 5.540248] systemd[1]: Listening on Journal Socket. | ||
| 781 | [ 5.540496] systemd[1]: Starting System Slice. | ||
| 782 | [ 5.560244] systemd[1]: Created slice System Slice. | ||
| 783 | [ 5.560534] systemd[1]: Starting Increase datagram queue length... | ||
| 784 | [ 5.641386] systemd[1]: Starting Restore / save the current clock... | ||
| 785 | [ 5.751305] systemd[1]: Starting Nameserver information manager... | ||
| 786 | [ 5.851710] systemd[1]: Mounting Debug File System... | ||
| 787 | [ 5.931511] systemd[1]: Starting Create list of required static device nodes for the current kernel... | ||
| 788 | [ 6.021737] systemd[1]: Mounted Huge Pages File System. | ||
| 789 | [ 6.022009] systemd[1]: Mounting POSIX Message Queue File System... | ||
| 790 | [ 6.114207] systemd[1]: Started Set Up Additional Binary Formats. | ||
| 791 | [ 6.114452] systemd[1]: Starting udev Coldplug all Devices... | ||
| 792 | [ 6.201417] systemd[1]: Starting system-getty.slice. | ||
| 793 | [ 6.220463] systemd[1]: Created slice system-getty.slice. | ||
| 794 | [ 6.220669] systemd[1]: Starting system-serial\x2dgetty.slice. | ||
| 795 | [ 6.240483] systemd[1]: Created slice system-serial\x2dgetty.slice. | ||
| 796 | [ 6.246053] systemd[1]: Starting Load Kernel Modules... | ||
| 797 | [ 6.371506] systemd[1]: Started File System Check on Root Device. | ||
| 798 | [ 6.371781] systemd[1]: Starting Slices. | ||
| 799 | [ 6.390413] systemd[1]: Reached target Slices. | ||
| 800 | [ 6.410612] systemd[1]: Mounted POSIX Message Queue File System. | ||
| 801 | [ 6.430492] systemd[1]: Mounted Debug File System. | ||
| 802 | [ 6.474509] [XRADIO] Driver Label:L34M.01.08.0002 Nov 22 2017 13:44:31 | ||
| 803 | [ 6.474638] [XRADIO] Allocated hw_priv @ d6a35240 | ||
| 804 | [ 6.475404] [SBUS] XRadio Device:sdio clk=50000000 | ||
| 805 | [ 6.475730] xradio wlan power on | ||
| 806 | [ 6.475763] gpio wl_reg_on set val 1, act val 1 | ||
| 807 | [ 6.520340] systemd[1]: Started Increase datagram queue length. | ||
| 808 | [ 6.525818] gpio wl_reg_on set val 0, act val 0 | ||
| 809 | [ 6.527848] gpio wl_reg_on set val 1, act val 1 | ||
| 810 | [ 6.627920] [XRADIO] Detect SDIO card 1 | ||
| 811 | [ 6.690285] systemd[1]: Started Restore / save the current clock. | ||
| 812 | [ 6.940383] systemd[1]: Started Create list of required static device nodes for the current kernel. | ||
| 813 | [ 6.974419] [XRADIO_ERR] xradio_load_firmware: can't read config register, err=-110. | ||
| 814 | [ 6.974452] [XRADIO_ERR] xradio_load_firmware failed(-110). | ||
| 815 | [ 7.140472] systemd[1]: Started Nameserver information manager. | ||
| 816 | [ 7.230466] systemd[1]: Started udev Coldplug all Devices. | ||
| 817 | [ 7.236954] systemd[1]: Time has been changed | ||
| 818 | [ 7.267721] systemd[1]: Starting Create Static Device Nodes in /dev... | ||
| 819 | [ 7.310818] xradio wlan power off | ||
| 820 | [ 7.310861] gpio wl_reg_on set val 0, act val 0 | ||
| 821 | [ 7.360973] [XRADIO] Remove SDIO card 1 | ||
| 822 | [ 7.361375] mmc1: card 0001 removed | ||
| 823 | [ 7.361889] [mmc]: sdc1 power_supply is null | ||
| 824 | [ 7.371804] systemd[1]: Starting Syslog Socket. | ||
| 825 | [ 7.390448] systemd[1]: Listening on Syslog Socket. | ||
| 826 | [ 7.434269] ep_matches, wrn: endpoint already claimed, ep(0xc09791ac, 0xd68c2440, ep1in-bulk) | ||
| 827 | [ 7.434310] ep_matches, wrn: endpoint already claimed, ep(0xc09791ac, 0xd68c2440, ep1in-bulk) | ||
| 828 | [ 7.434336] ep_matches, wrn: endpoint already claimed, ep(0xc09791f8, 0xd68c2440, ep1out-bulk) | ||
| 829 | [ 7.434359] gadget_is_softwinner_otg is not -int | ||
| 830 | [ 7.434375] gadget_is_softwinner_otg is not -int | ||
| 831 | [ 7.434412] g_serial gadget: Gadget Serial v2.4 | ||
| 832 | [ 7.434444] g_serial gadget: g_serial ready | ||
| 833 | [ 7.444403] [XRADIO_ERR] xradio_host_dbg_init failed=2599 | ||
| 834 | [ 7.444435] [XRADIO] Driver Label:L34M.01.08.0002 Nov 22 2017 13:44:31 | ||
| 835 | [ 7.444551] [XRADIO] Allocated hw_priv @ d6b8b240 | ||
| 836 | [ 7.445148] xradio wlan power on | ||
| 837 | [ 7.445183] gpio wl_reg_on set val 1, act val 1 | ||
| 838 | [ 7.495233] gpio wl_reg_on set val 0, act val 0 | ||
| 839 | [ 7.497260] gpio wl_reg_on set val 1, act val 1 | ||
| 840 | [ 7.550294] systemd[1]: Started Create Static Device Nodes in /dev. | ||
| 841 | [ 7.551769] systemd[1]: Starting udev Kernel Device Manager... | ||
| 842 | [ 7.597346] [XRADIO] Detect SDIO card 1 | ||
| 843 | [ 7.598901] [mmc]: sdc1 power_supply is null | ||
| 844 | [ 7.659652] mmc1: new high speed SDIO card at address 0001 | ||
| 845 | [ 7.660431] [SBUS] XRadio Device:sdio clk=50000000 | ||
| 846 | [ 7.661560] [XRADIO] XRADIO_HW_REV 1.0 detected. | ||
| 847 | [ 7.673920] systemd-udevd[193]: starting version 215 | ||
| 848 | [ 7.690403] systemd[1]: Started udev Kernel Device Manager. | ||
| 849 | [ 7.691331] systemd[1]: Starting Copy rules generated while the root was ro... | ||
| 850 | [ 7.811732] systemd[1]: Starting LSB: Tune IDE hard disks... | ||
| 851 | [ 7.814240] [XRADIO] Bootloader complete | ||
| 852 | [ 7.901339] systemd[1]: Starting LSB: Set preliminary keymap... | ||
| 853 | [ 7.976787] [XRADIO] Firmware completed. | ||
| 854 | [ 7.981385] [WSM] Firmware Label:XR_C01.08.0043 Jun 6 2016 20:41:04 | ||
| 855 | [ 7.988276] [XRADIO] Firmware Startup Done. | ||
| 856 | [ 7.994446] systemd[1]: Mounted FUSE Control File System. | ||
| 857 | [ 7.997395] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' | ||
| 858 | [ 8.060603] systemd[1]: Started Copy rules generated while the root was ro. | ||
| 859 | [ 8.063071] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE | ||
| 860 | [ 8.170755] systemd[1]: Failed to start Load Kernel Modules. | ||
| 861 | [ 8.170961] systemd[1]: Unit systemd-modules-load.service entered failed state. | ||
| 862 | [ 8.172342] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x77) | ||
| 863 | [ 8.172407] bmp085: probe of 0-0077 failed with error -70 | ||
| 864 | [ 8.173824] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48) | ||
| 865 | [ 8.188726] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, dev addr: 0x48) | ||
| 866 | [ 8.240546] systemd[1]: Started LSB: Tune IDE hard disks. | ||
| 867 | [ 8.290550] systemd[1]: Found device /dev/ttyS0. | ||
| 868 | [ 8.325430] systemd[1]: Starting Sound Card. | ||
| 869 | [ 8.340563] systemd[1]: Reached target Sound Card. | ||
| 870 | [ 8.340954] systemd[1]: Starting Apply Kernel Variables... | ||
| 871 | [ 8.472037] systemd[1]: Mounted Configuration File System. | ||
| 872 | [ 8.500514] systemd[1]: Found device /dev/ttyGS0. | ||
| 873 | [ 8.580417] systemd[1]: Started Apply Kernel Variables. | ||
| 874 | [ 8.597015] systemd[1]: Starting system-systemd\x2drfkill.slice. | ||
| 875 | [ 8.620311] systemd[1]: Created slice system-systemd\x2drfkill.slice. | ||
| 876 | [ 8.860323] systemd[1]: Started LSB: Set preliminary keymap. | ||
| 877 | [ 8.861497] systemd[1]: Starting Remount Root and Kernel File Systems... | ||
| 878 | [ 8.973555] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro | ||
| 879 | [ 9.050416] systemd[1]: Started Remount Root and Kernel File Systems. | ||
| 880 | [ 9.051613] systemd[1]: Starting Load/Save RF Kill Switch Status of rfkill0... | ||
| 881 | [ 9.171336] systemd[1]: Activating swap /var/swap... | ||
| 882 | [ 9.281176] systemd[1]: Started Various fixups to make systemd work better on Debian. | ||
| 883 | [ 9.281407] systemd[1]: Starting Load/Save Random Seed... | ||
| 884 | [ 9.371641] systemd[1]: Starting Local File Systems (Pre). | ||
| 885 | [ 9.390454] systemd[1]: Reached target Local File Systems (Pre). | ||
| 886 | [ 9.390741] systemd[1]: Mounting /tmp... | ||
| 887 | [ 9.408199] Adding 131068k swap on /var/swap. Priority:-1 extents:2 across:139260k SS | ||
| 888 | [ 9.490443] systemd[1]: Activated swap /var/swap. | ||
| 889 | [ 9.510286] systemd[1]: Mounted /tmp. | ||
| 890 | [ 9.620294] systemd[1]: Started Load/Save RF Kill Switch Status of rfkill0. | ||
| 891 | [ 9.700292] systemd[1]: Started Load/Save Random Seed. | ||
| 892 | [ 9.716284] systemd[1]: Starting Local File Systems. | ||
| 893 | [ 9.740286] systemd[1]: Reached target Local File Systems. | ||
| 894 | [ 9.740596] systemd[1]: Starting Armbian enhanced Log2Ram... | ||
| 895 | [ 9.841473] systemd[1]: Starting Create Volatile Files and Directories... | ||
| 896 | [ 9.961696] systemd[1]: Starting LSB: Raise network interfaces.... | ||
| 897 | [ 10.071720] systemd[1]: Starting Remote File Systems. | ||
| 898 | [ 10.090499] systemd[1]: Reached target Remote File Systems. | ||
| 899 | [ 10.090963] systemd[1]: Starting LSB: Prepare console... | ||
| 900 | [ 10.161494] systemd[1]: Starting Swap. | ||
| 901 | [ 10.180540] systemd[1]: Reached target Swap. | ||
| 902 | [ 10.360544] systemd[1]: Started Armbian enhanced Log2Ram. | ||
| 903 | [ 10.460494] systemd[1]: Started Create Volatile Files and Directories. | ||
| 904 | [ 10.540313] systemd[1]: Started LSB: Prepare console. | ||
| 905 | [ 11.188918] systemd[1]: Starting LSB: Set console font and keymap... | ||
| 906 | [ 11.261397] systemd[1]: Starting Update UTMP about System Boot/Shutdown... | ||
| 907 | [ 11.401515] systemd[1]: Starting Journal Service... | ||
| 908 | [ 11.520567] systemd[1]: Started Journal Service. | ||
| 909 | [ 11.688752] systemd-journald[394]: Received request to flush runtime journal from PID 1 | ||
| 910 | [ 22.539720] gmac0: probed | ||
| 911 | [ 22.542816] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00) | ||
| 912 | [ 24.073513] [STA] !!!xradio_vif_setup: id=0, type=2, p2p=0 | ||
| 913 | [ 24.114457] ADDRCONF(NETDEV_UP): wlan0: link is not ready | ||
| 914 | [ 25.540326] PHY: gmac0-0:00 - Link is Up - 100/Full | ||
| 915 | {{/code}} | ||
| |
3.1 | 916 |