Skip to Content

Changes for page Openwrt Notes

Last modified by Leon Poon on 2019/11/02 17:53
From version 2.1
edited by Leon Poon
on 2019/01/05 14:46
Change comment: There is no comment for this version
To version 32.1
edited by Leon Poon
on 2019/11/02 05:33
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -Openwrt Boot Notes
1 +Openwrt Notes
Content
... ... @@ -8,13 +8,122 @@
8 8  
9 9  /sbin/init is ELF comes from procd package. What it does (as pid=1):
10 10  
11 -* early:
11 +* early (different from procd early):
12 12  ** mount /proc, /sysfs, and create /dev nodes, create /tmp subdirs etc
13 13  ** set PATH
14 -* kmodloader in subprocess
14 +* kmodloader in subprocess (waits until done)
15 15  * preinit
16 16  ** plugd in subprocess (seem to deal with firmware)
17 17  ** /etc/preinit in subprocess
18 18  * when /etc/preinit is done then it execvp the "real" /sbin/procd
19 19  
20 -
20 +procd states:
21 +
22 +* early (first state):
23 +** coldplug (remount /dev, etc)
24 +*** start udevtrigger in subproc
25 +*** when udevtrigger completes, hotplug
26 +*** when hotplug completes, next state (ubus)
27 +* ubus:
28 +** start attempts to connect to ubs
29 +** start ubus as service
30 +** once connection's done then next state (init)
31 +* init - read /etc/inittab and run:
32 +** respawn - things that need to keep rerunning once quitted
33 +** askconsole
34 +** askfirst - the "Press Enter to activate this console" message
35 +** sysinit - (usually /etc/init.d/rcS with S) and then next state (running)
36 +* running - waits for shutdown signal (usr1/usr2) or reboot (int/term)
37 +* shutdown
38 +** runs shutdown command per inittab (also /etc/init.d/rcS but with K)
39 +** when done next state (halt)
40 +* halt - kill everything and either enter sleep loop or reboots
41 +
42 += Debian =
43 +
44 +{{code}}
45 +debootstrap --variant=minbase --include locales,sudo,sysvinit-core,sysvinit-utils,vim-nox,openssh-server --exclude=nano,vim-tiny --foreign stretch $PWD
46 +debootstrap/debootstrap --second-stage
47 +{{/code}}
48 +
49 +{{code}}
50 +qemu-debootstrap --include=locales,sudo,sysvinit-core,sysvinit-utils,vim-nox,openssh-server --exclude=nano,vim-tiny,systemd,systemd-sysv --arch mipsel stretch /mnt/cdrom
51 +{{/code}}
52 +
53 +Things to do after debootstrap:
54 +
55 +* [[get rid of systemd>>http://without-systemd.org/wiki/index.php/How_to_remove_systemd_from_a_Debian_Stretch_installation]]
56 +* set hostname
57 +* set root password
58 +* /etc/network/interfaces (TODO: swconfig while still in openwrt initramfs space?)
59 +* apt-get install net-tools file ntp openssh-server gcc
60 +** net-tools for ifconfig
61 +** gcc for?
62 +* read-only root
63 +
64 +Needs CONFIG_DEVTMPFS=y in kernel.
65 +
66 +{{code language="bash"}}
67 +mkdir -pv /mnt &&
68 +mknod /dev/sda b 8 0 &&
69 +cryptsetup open /dev/sda usb &&
70 +vgchange -ay vol_grp1 &&
71 +mount /dev/vol_grp1/logical_vol1 /mnt -o ro
72 +{{/code}}
73 +
74 +{{code language="bash"}}
75 +chroot /mnt /bin/bash
76 +{{/code}}
77 +
78 +{{code language="bash"}}
79 +mount proc /proc -t proc
80 +{{/code}}
81 +
82 +{{code language="bash"}}
83 +exec switch_root /mnt /sbin/init
84 +{{/code}}
85 +
86 +{{code language="bash"}}
87 +ip addr add dev eth0 IP/NM
88 +ip link set eth0 up
89 +ip route add default via GW
90 +{{/code}}
91 +
92 += Network =
93 +
94 +{{code language="bash"}}
95 +sed -re 's/^boot_run_hook/#\0/g' -i /etc/preinit
96 +PREINIT=1 . /etc/preinit
97 +preinit_config_board # set up the switch and lan ports on eth0.2, and create ip link
98 +json_select switch
99 +json_select switch0
100 +json_add_boolean reset 0 # do not reset when setting up wan ports on eth0.1
101 +json_select ..
102 +json_select ..
103 +preinit_config_switch switch0 eth0.1 # set up wan ports
104 +preinit_ip_config eth0.1 # create ip link
105 +ip address flush dev eth0 # del default address
106 +for pi_ifname in eth0.1 eth0.2; do
107 + ip -4 address flush dev $pi_ifname # del default address
108 + ip link set dev $pi_ifname down
109 +done
110 +{{/code}}
111 +
112 +
113 += UBI =
114 +
115 +{{code language="text"}}define Build/append-ubi
116 + sh $(TOPDIR)/scripts/ubinize-image.sh \
117 + $(if $(UBOOTENV_IN_UBI),--uboot-env) \
118 + $(if $(KERNEL_IN_UBI),--kernel $(IMAGE_KERNEL)) \
119 + $(foreach part,$(UBINIZE_PARTS),--part $(part)) \
120 + $(IMAGE_ROOTFS) \
121 + $@.tmp \
122 + -p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
123 + $(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
124 + $(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
125 + $(UBINIZE_OPTS)
126 + cat $@.tmp >> $@
127 + rm $@.tmp
128 +endef{{/code}}
129 +~{~{/code}}