Changes for page Openwrt Notes

Summary

• Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-Openwrt Boot Notes
	1	+Openwrt Notes

Content

...	...	@@ -8,7 +8,7 @@
8	8
9	9	/sbin/init is ELF comes from procd package. What it does (as pid=1):
10	10
11		-* early:
	11	+* early (different from procd early):
12	12	** mount /proc, /sysfs, and create /dev nodes, create /tmp subdirs etc
13	13	** set PATH
14	14	* kmodloader in subprocess (waits until done)
...	...	@@ -17,4 +17,40 @@
17	17	** /etc/preinit in subprocess
18	18	* when /etc/preinit is done then it execvp the "real" /sbin/procd
19	19
20		-
	20	+procd states:
	21	+
	22	+* early (first state):
	23	+** coldplug (remount /dev, etc)
	24	+*** start udevtrigger in subproc
	25	+*** when udevtrigger completes, hotplug
	26	+*** when hotplug completes, next state (ubus)
	27	+* ubus:
	28	+** start attempts to connect to ubs
	29	+** start ubus as service
	30	+** once connection's done then next state (init)
	31	+* init - read /etc/inittab and run:
	32	+** respawn - things that need to keep rerunning once quitted
	33	+** askconsole
	34	+** askfirst - the "Press Enter to activate this console" message
	35	+** sysinit - (usually /etc/init.d/rcS with S) and then next state (running)
	36	+* running - waits for shutdown signal (usr1/usr2) or reboot (int/term)
	37	+* shutdown
	38	+** runs shutdown command per inittab (also /etc/init.d/rcS but with K)
	39	+** when done next state (halt)
	40	+* halt - kill everything and either enter sleep loop or reboots
	41	+
	42	+= Debian =
	43	+
	44	+Needs devtmpfs in kernel. This seem to be first thing that /sbin/init does. (Maybe systemd specific.)
	45	+
	46	+{{code language="bash"}}
	47	+mkdir -pv /mnt/debian && mknod /dev/sda b 8 0 && cryptsetup open /dev/sda usb && vgchange -ay vol_grp1 && mount /dev/vol_grp1/logical_vol1 /mnt/debian
	48	+exec switch_root /mnt/debian /sbin/init
	49	+{{/code}}
	50	+
	51	+{{code language="bash"}}
	52	+ip addr add dev eth0 IP/NM
	53	+ip link set eth0 up
	54	+ip route add default via GW
	55	+{{/code}}
	56	+