Wiki source code of Openwrt Notes

Version 24.1 by Leon Poon on 2019/01/06 14:51
Show last authors
1
2
3 = initramfs-kernel =
4
5 kernel runs /init.
6
7 /init is a script which sets INITRAMFS=1 and then execs /sbin/init.
8
9 /sbin/init is ELF comes from procd package. What it does (as pid=1):
10
11 * early (different from procd early):
12 ** mount /proc, /sysfs, and create /dev nodes, create /tmp subdirs etc
13 ** set PATH
14 * kmodloader in subprocess (waits until done)
15 * preinit
16 ** plugd in subprocess (seem to deal with firmware)
17 ** /etc/preinit in subprocess
18 * when /etc/preinit is done then it execvp the "real" /sbin/procd
19
20 procd states:
21
22 * early (first state):
23 ** coldplug (remount /dev, etc)
24 *** start udevtrigger in subproc
25 *** when udevtrigger completes, hotplug
26 *** when hotplug completes, next state (ubus)
27 * ubus:
28 ** start attempts to connect to ubs
29 ** start ubus as service
30 ** once connection's done then next state (init)
31 * init - read /etc/inittab and run:
32 ** respawn - things that need to keep rerunning once quitted
33 ** askconsole
34 ** askfirst - the "Press Enter to activate this console" message
35 ** sysinit - (usually /etc/init.d/rcS with S) and then next state (running)
36 * running - waits for shutdown signal (usr1/usr2) or reboot (int/term)
37 * shutdown
38 ** runs shutdown command per inittab (also /etc/init.d/rcS but with K)
39 ** when done next state (halt)
40 * halt - kill everything and either enter sleep loop or reboots
41
42 = Debian =
43
44 Things to do after debootstrap:
45
46 * [[get rid of systemd>>http://without-systemd.org/wiki/index.php/How_to_remove_systemd_from_a_Debian_Stretch_installation]]
47 * set hostname
48 * set root password
49 * /etc/network/interfaces (TODO: swconfig while still in openwrt initramfs space?)
50 * apt-get install net-tools file ntp openssh-server gcc
51 ** net-tools for ifconfig
52 ** gcc for?
53 * read-only root
54
55 Needs CONFIG_DEVTMPFS=y in kernel.
56
57 {{code language="bash"}}
58 mkdir -pv /mnt &&
59 mknod /dev/sda b 8 0 &&
60 cryptsetup open /dev/sda usb &&
61 vgchange -ay vol_grp1 &&
62 mount /dev/vol_grp1/logical_vol1 /mnt -o ro
63 {{/code}}
64
65 {{code language="bash"}}
66 chroot /mnt /bin/bash
67 {{/code}}
68
69 {{code language="bash"}}
70 mount proc /proc -t proc
71 {{/code}}
72
73 {{code language="bash"}}
74 exec switch_root /mnt /sbin/init
75 {{/code}}
76
77 {{code language="bash"}}
78 ip addr add dev eth0 IP/NM
79 ip link set eth0 up
80 ip route add default via GW
81 {{/code}}
82
83 = Network =
84
85 {{code language="bash"}}
86 sed -re 's/^boot_run_hook/#\0/g' -i /etc/preinit
87 PREINIT=1 . /etc/preinit
88 preinit_config_board # set up the switch and lan ports on eth0.2
89 json_select switch
90 json_select switch0
91 json_add_boolean reset 0 # do not reset when setting up wan ports on eth0.1
92 json_select ..
93 json_select ..
94 preinit_config_switch switch0 eth0.1 # set up wan
95 preinit_ip_config eth0.1
96 for pi_ifname in eth0.1 eth0.2; do
97 ip -4 address flush dev $pi_ifname # del default address
98 done
99 {{/code}}