Wiki source code of Openwrt Notes
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
1.1 | 1 | |
| 2 | |||
| 3 | = initramfs-kernel = | ||
| 4 | |||
| 5 | kernel runs /init. | ||
| 6 | |||
| 7 | /init is a script which sets INITRAMFS=1 and then execs /sbin/init. | ||
| 8 | |||
| |
2.1 | 9 | /sbin/init is ELF comes from procd package. What it does (as pid=1): |
| |
1.1 | 10 | |
| |
4.1 | 11 | * early (different from procd early): |
| |
1.1 | 12 | ** mount /proc, /sysfs, and create /dev nodes, create /tmp subdirs etc |
| 13 | ** set PATH | ||
| |
3.1 | 14 | * kmodloader in subprocess (waits until done) |
| |
1.1 | 15 | * preinit |
| 16 | ** plugd in subprocess (seem to deal with firmware) | ||
| 17 | ** /etc/preinit in subprocess | ||
| |
2.1 | 18 | * when /etc/preinit is done then it execvp the "real" /sbin/procd |
| |
1.1 | 19 | |
| |
4.1 | 20 | procd states: |
| 21 | |||
| 22 | * early (first state): | ||
| 23 | ** coldplug (remount /dev, etc) | ||
| 24 | *** start udevtrigger in subproc | ||
| 25 | *** when udevtrigger completes, hotplug | ||
| 26 | *** when hotplug completes, next state (ubus) | ||
| 27 | * ubus: | ||
| 28 | ** start attempts to connect to ubs | ||
| 29 | ** start ubus as service | ||
| 30 | ** once connection's done then next state (init) | ||
| 31 | * init - read /etc/inittab and run: | ||
| 32 | ** respawn - things that need to keep rerunning once quitted | ||
| 33 | ** askconsole | ||
| 34 | ** askfirst - the "Press Enter to activate this console" message | ||
| 35 | ** sysinit - (usually /etc/init.d/rcS with S) and then next state (running) | ||
| 36 | * running - waits for shutdown signal (usr1/usr2) or reboot (int/term) | ||
| 37 | * shutdown | ||
| 38 | ** runs shutdown command per inittab (also /etc/init.d/rcS but with K) | ||
| 39 | ** when done next state (halt) | ||
| 40 | * halt - kill everything and either enter sleep loop or reboots | ||
| 41 | |||
| |
5.1 | 42 | = Debian = |
| 43 | |||
| |
11.1 | 44 | Things to do after debootstrap: |
| |
5.1 | 45 | |
| |
11.1 | 46 | * [[get rid of systemd>>http://without-systemd.org/wiki/index.php/How_to_remove_systemd_from_a_Debian_Stretch_installation]] |
| |
13.1 | 47 | * set hostname |
| |
11.1 | 48 | * set root password |
| 49 | * /etc/network/interfaces (TODO: swconfig while still in openwrt initramfs space?) | ||
| |
15.1 | 50 | * apt-get install net-tools file ntp openssh-server gcc |
| 51 | ** net-tools for ifconfig | ||
| |
14.1 | 52 | ** gcc for? |
| |
11.1 | 53 | * read-only root |
| 54 | |||
| 55 | Needs CONFIG_DEVTMPFS=y in kernel. | ||
| 56 | |||
| |
9.1 | 57 | {{code language="bash"}} |
| |
19.1 | 58 | mkdir -pv /mnt && |
| 59 | mknod /dev/sda b 8 0 && | ||
| 60 | cryptsetup open /dev/sda usb && | ||
| 61 | vgchange -ay vol_grp1 && | ||
| 62 | mount /dev/vol_grp1/logical_vol1 /mnt -o ro | ||
| |
10.1 | 63 | {{/code}} |
| 64 | |||
| 65 | {{code language="bash"}} | ||
| |
13.1 | 66 | chroot /mnt /bin/bash |
| |
10.1 | 67 | {{/code}} |
| 68 | |||
| 69 | {{code language="bash"}} | ||
| 70 | mount proc /proc -t proc | ||
| 71 | {{/code}} | ||
| 72 | |||
| 73 | {{code language="bash"}} | ||
| |
13.1 | 74 | exec switch_root /mnt /sbin/init |
| |
6.1 | 75 | {{/code}} |
| 76 | |||
| |
9.1 | 77 | {{code language="bash"}} |
| 78 | ip addr add dev eth0 IP/NM | ||
| |
8.1 | 79 | ip link set eth0 up |
| |
9.1 | 80 | ip route add default via GW |
| |
7.1 | 81 | {{/code}} |
| |
16.1 | 82 | |
| 83 | = Network = | ||
| 84 | |||
| 85 | {{code language="bash"}} | ||
| |
22.1 | 86 | sed -re 's/^boot_run_hook/#\0/g' -i /etc/preinit |
| 87 | PREINIT=1 . /etc/preinit | ||
| |
26.1 | 88 | preinit_config_board # set up the switch and lan ports on eth0.2, and create ip link |
| |
23.1 | 89 | json_select switch |
| 90 | json_select switch0 | ||
| 91 | json_add_boolean reset 0 # do not reset when setting up wan ports on eth0.1 | ||
| 92 | json_select .. | ||
| 93 | json_select .. | ||
| |
26.1 | 94 | preinit_config_switch switch0 eth0.1 # set up wan ports |
| 95 | preinit_ip_config eth0.1 # create ip link | ||
| |
25.1 | 96 | ip address flush dev eth0 # del default address |
| |
20.1 | 97 | for pi_ifname in eth0.1 eth0.2; do |
| |
23.1 | 98 | ip -4 address flush dev $pi_ifname # del default address |
| |
25.1 | 99 | ip link set dev $pi_ifname down |
| |
20.1 | 100 | done |
| |
16.1 | 101 | {{/code}} |