Wiki source code of Openwrt Notes

Version 36.1 by Leon Poon on 2019/11/02 05:54
Show last authors
1
2
3 = initramfs-kernel =
4
5 kernel runs /init.
6
7 /init is a script which sets INITRAMFS=1 and then execs /sbin/init.
8
9 /sbin/init is ELF comes from procd package. What it does (as pid=1):
10
11 * early (different from procd early):
12 ** mount /proc, /sysfs, and create /dev nodes, create /tmp subdirs etc
13 ** set PATH
14 * kmodloader in subprocess (waits until done)
15 * preinit
16 ** plugd in subprocess (seem to deal with firmware)
17 ** /etc/preinit in subprocess
18 * when /etc/preinit is done then it execvp the "real" /sbin/procd
19
20 procd states:
21
22 * early (first state):
23 ** coldplug (remount /dev, etc)
24 *** start udevtrigger in subproc
25 *** when udevtrigger completes, hotplug
26 *** when hotplug completes, next state (ubus)
27 * ubus:
28 ** start attempts to connect to ubs
29 ** start ubus as service
30 ** once connection's done then next state (init)
31 * init - read /etc/inittab and run:
32 ** respawn - things that need to keep rerunning once quitted
33 ** askconsole
34 ** askfirst - the "Press Enter to activate this console" message
35 ** sysinit - (usually /etc/init.d/rcS with S) and then next state (running)
36 * running - waits for shutdown signal (usr1/usr2) or reboot (int/term)
37 * shutdown
38 ** runs shutdown command per inittab (also /etc/init.d/rcS but with K)
39 ** when done next state (halt)
40 * halt - kill everything and either enter sleep loop or reboots
41
42 = Debian =
43
44 {{code}}
45 debootstrap --variant=minbase --include locales,sudo,sysvinit-core,sysvinit-utils,vim-nox,screen,wget,ntp,bridge-utils,ifupdown --exclude=nano,vim-tiny --foreign stretch $PWD
46 chroot $PWD debootstrap/debootstrap --second-stage
47 {{/code}}
48
49 {{code}}
50 qemu-debootstrap --include=locales,sudo,sysvinit-core,sysvinit-utils,vim-nox,screen,wget,ntp,bridge-utils,ifupdown --exclude=nano,vim-tiny,systemd,systemd-sysv --arch mipsel stretch /mnt/cdrom
51 {{/code}}
52
53 Do not install openssh-server during bootstrap otherwise it will bring in systemd!
54
55 Things to do after debootstrap:
56
57 * [[get rid of systemd>>http://without-systemd.org/wiki/index.php/How_to_remove_systemd_from_a_Debian_Stretch_installation]]
58 * set hostname
59 * set root password
60 * /etc/network/interfaces (TODO: swconfig while still in openwrt initramfs space?)
61 * apt-get install ~-~-no-install-recommends openssh-server (check that it is without libpam-systemd and systemd!!)
62 * apt-get install net-tools file ntp openssh-server gcc
63 ** net-tools for ifconfig
64 ** gcc for?
65 * read-only root
66
67 Needs CONFIG_DEVTMPFS=y in kernel.
68
69 {{code language="bash"}}
70 mkdir -pv /mnt &&
71 mknod /dev/sda b 8 0 &&
72 cryptsetup open /dev/sda usb &&
73 vgchange -ay vol_grp1 &&
74 mount /dev/vol_grp1/logical_vol1 /mnt -o ro
75 {{/code}}
76
77 {{code language="bash"}}
78 chroot /mnt /bin/bash
79 {{/code}}
80
81 {{code language="bash"}}
82 mount proc /proc -t proc
83 {{/code}}
84
85 {{code language="bash"}}
86 exec switch_root /mnt /sbin/init
87 {{/code}}
88
89 {{code language="bash"}}
90 ip addr add dev eth0 IP/NM
91 ip link set eth0 up
92 ip route add default via GW
93 {{/code}}
94
95 = Network =
96
97 {{code language="bash"}}
98 sed -re 's/^boot_run_hook/#\0/g' -i /etc/preinit
99 PREINIT=1 . /etc/preinit
100 preinit_config_board # set up the switch and lan ports on eth0.2, and create ip link
101 json_select switch
102 json_select switch0
103 json_add_boolean reset 0 # do not reset when setting up wan ports on eth0.1
104 json_select ..
105 json_select ..
106 preinit_config_switch switch0 eth0.1 # set up wan ports
107 preinit_ip_config eth0.1 # create ip link
108 ip address flush dev eth0 # del default address
109 for pi_ifname in eth0.1 eth0.2; do
110 ip -4 address flush dev $pi_ifname # del default address
111 ip link set dev $pi_ifname down
112 done
113 {{/code}}
114
115
116 = UBI =
117
118 {{code language="text"}}define Build/append-ubi
119 sh $(TOPDIR)/scripts/ubinize-image.sh \
120 $(if $(UBOOTENV_IN_UBI),--uboot-env) \
121 $(if $(KERNEL_IN_UBI),--kernel $(IMAGE_KERNEL)) \
122 $(foreach part,$(UBINIZE_PARTS),--part $(part)) \
123 $(IMAGE_ROOTFS) \
124 $@.tmp \
125 -p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
126 $(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
127 $(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
128 $(UBINIZE_OPTS)
129 cat $@.tmp >> $@
130 rm $@.tmp
131 endef{{/code}}
132 ~{~{/code}}