Wiki source code of Openwrt Notes

Version 44.1 by Leon Poon on 2019/11/02 06:33
Show last authors
1
2
3 = initramfs-kernel =
4
5 kernel runs /init.
6
7 /init is a script which sets INITRAMFS=1 and then execs /sbin/init.
8
9 /sbin/init is ELF comes from procd package. What it does (as pid=1):
10
11 * early (different from procd early):
12 ** mount /proc, /sysfs, and create /dev nodes, create /tmp subdirs etc
13 ** set PATH
14 * kmodloader in subprocess (waits until done)
15 * preinit
16 ** plugd in subprocess (seem to deal with firmware)
17 ** /etc/preinit in subprocess
18 * when /etc/preinit is done then it execvp the "real" /sbin/procd
19
20 procd states:
21
22 * early (first state):
23 ** coldplug (remount /dev, etc)
24 *** start udevtrigger in subproc
25 *** when udevtrigger completes, hotplug
26 *** when hotplug completes, next state (ubus)
27 * ubus:
28 ** start attempts to connect to ubs
29 ** start ubus as service
30 ** once connection's done then next state (init)
31 * init - read /etc/inittab and run:
32 ** respawn - things that need to keep rerunning once quitted
33 ** askconsole
34 ** askfirst - the "Press Enter to activate this console" message
35 ** sysinit - (usually /etc/init.d/rcS with S) and then next state (running)
36 * running - waits for shutdown signal (usr1/usr2) or reboot (int/term)
37 * shutdown
38 ** runs shutdown command per inittab (also /etc/init.d/rcS but with K)
39 ** when done next state (halt)
40 * halt - kill everything and either enter sleep loop or reboots
41
42 = Modules =
43
44 {{code}}
45 cp -va ./build_dir/target-*/linux-*/linux-4*/modules.builtin ./staging_dir/target-*/root-*/lib/modules/4*
46 # tar -C ./staging_dir/target-*/root-*/ -vcjf modules.tar.bz2 lib/modules
47 {{/code}}
48
49 = Debian =
50
51 {{code}}
52 debootstrap --variant=minbase --include locales,sudo,sysvinit-core,sysvinit-utils,vim-nox,screen,wget,ntp,bridge-utils,ifupdown --exclude=nano,vim-tiny --foreign stretch $PWD
53 chroot $PWD debootstrap/debootstrap --second-stage
54 {{/code}}
55
56 {{code}}
57 qemu-debootstrap --include=locales,sudo,sysvinit-core,sysvinit-utils,vim-nox,screen,wget,ntp,bridge-utils,ifupdown --exclude=nano,vim-tiny,systemd,systemd-sysv --arch mipsel stretch $PWD
58 {{/code}}
59
60 Do not install openssh-server during bootstrap otherwise it will bring in systemd!
61
62 Things to do after debootstrap:
63
64 * [[get rid of systemd>>http://without-systemd.org/wiki/index.php/How_to_remove_systemd_from_a_Debian_Stretch_installation]]
65 * dpkg-reconfigure locales
66 * set hostname
67 * set root password
68 * /etc/network/interfaces (TODO: swconfig while still in openwrt initramfs space?)
69 * apt-get install ~-~-no-install-recommends openssh-server (check that it is without libpam-systemd and systemd!!)
70 * apt-get install net-tools file ntp openssh-server gcc lvm2
71 ** net-tools for ifconfig
72 ** gcc for?
73 * echo vm.min_free_kbytes=16384 > /etc/sysctl.d/min_free_kbytes.conf
74 * apt-get install kmod (depmod, etc)
75 * kernel modules ( tar ~-~-owner=0 ~-~-group=0  -C ./staging_dir/target-*/root-*/ -vcjf - lib/modules | ssh TARGET_IP tar -C /chroot -vxjf - )
76 * depmod
77 * read-only root
78
79 Needs CONFIG_DEVTMPFS=y in kernel.
80
81 {{code language="bash"}}
82 mkdir -pv /mnt &&
83 mknod /dev/sda b 8 0 &&
84 cryptsetup open /dev/sda usb &&
85 vgchange -ay vol_grp1 &&
86 mount /dev/vol_grp1/logical_vol1 /mnt -o ro
87 {{/code}}
88
89 {{code language="bash"}}
90 chroot /mnt /bin/bash
91 {{/code}}
92
93 {{code language="bash"}}
94 mount proc /proc -t proc
95 {{/code}}
96
97 {{code language="bash"}}
98 exec switch_root /mnt /sbin/init
99 {{/code}}
100
101 {{code language="bash"}}
102 ip addr add dev eth0 IP/NM
103 ip link set eth0 up
104 ip route add default via GW
105 {{/code}}
106
107 = Network =
108
109 {{code language="bash"}}
110 sed -re 's/^boot_run_hook/#\0/g' -i /etc/preinit
111 PREINIT=1 . /etc/preinit
112 preinit_config_board # set up the switch and lan ports on eth0.2, and create ip link
113 json_select switch
114 json_select switch0
115 json_add_boolean reset 0 # do not reset when setting up wan ports on eth0.1
116 json_select ..
117 json_select ..
118 preinit_config_switch switch0 eth0.1 # set up wan ports
119 preinit_ip_config eth0.1 # create ip link
120 ip address flush dev eth0 # del default address
121 for pi_ifname in eth0.1 eth0.2; do
122 ip -4 address flush dev $pi_ifname # del default address
123 ip link set dev $pi_ifname down
124 done
125 {{/code}}
126
127
128 = UBI =
129
130 {{code language="text"}}define Build/append-ubi
131 sh $(TOPDIR)/scripts/ubinize-image.sh \
132 $(if $(UBOOTENV_IN_UBI),--uboot-env) \
133 $(if $(KERNEL_IN_UBI),--kernel $(IMAGE_KERNEL)) \
134 $(foreach part,$(UBINIZE_PARTS),--part $(part)) \
135 $(IMAGE_ROOTFS) \
136 $@.tmp \
137 -p $(BLOCKSIZE:%k=%KiB) -m $(PAGESIZE) \
138 $(if $(SUBPAGESIZE),-s $(SUBPAGESIZE)) \
139 $(if $(VID_HDR_OFFSET),-O $(VID_HDR_OFFSET)) \
140 $(UBINIZE_OPTS)
141 cat $@.tmp >> $@
142 rm $@.tmp
143 endef{{/code}}
144 ~{~{/code}}
145 ~{~{/code}}