Linksys EA8100

Last modified by Leon Poon on 2019/09/08 21:47

https://www.linksys.com/sg/p/P-EA8100/

Linksys EA8100 Max-Streamâ„¢ AC2600 MU-MIMO Gigabit WiFi Router

Dev wiki: https://wikidevi.com/wiki/Linksys_EA8100

ea8100_circuit.jpg

UART: 3.3v 115200.

===================================================================
                MT7621   stage1 code 10:33:11 (ASIC)
                CPU=50000000 HZ BUS=16666666 HZ
==================================================================
Change MPLL source from XTAL to CR...
do MEMPLL setting..
MEMPLL Config : 0x11100000
3PLL mode + External loopback
=== XTAL-40Mhz === DDR-1200Mhz ===
PLL2 FB_DL: 0xe, 1/0 = 621/403 39000000
PLL3 FB_DL: 0x10, 1/0 = 646/378 41000000
PLL4 FB_DL: 0x1a, 1/0 = 533/491 69000000
do DDR setting..[00320381]
Apply DDR3 Setting...(use customer AC)
          0    8   16   24   32   40   48   56   64   72   80   88   96  104  112  120
      --------------------------------------------------------------------------------
0000:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0001:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0002:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0003:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0004:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0005:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0006:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0007:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0008:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0009:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
000D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    1
000E:|    0    0    0    0    0    0    0    0    0    1    1    1    1    1    1    1
000F:|    0    0    0    0    1    1    1    1    1    1    1    1    1    1    0    0
0010:|    1    1    1    1    1    1    1    1    1    0    0    0    0    0    0    0
0011:|    1    1    1    1    0    0    0    0    0    0    0    0    0    0    0    0
0012:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0013:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0014:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0015:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0016:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0017:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0018:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
0019:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001A:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001B:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001C:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001D:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001E:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
001F:|    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0    0
rank 0 coarse = 15
rank 0 fine = 72
B:|    0    0    0    0    0    0    0    0    0    1    1    1    0    0    0    0
opt_dle value:10
DRAMC_R0DELDLY[018]=00001D1D
==================================================================
                RX      DQS perbit delay software calibration
==================================================================
1.0-15 bit dq delay value
==================================================================
bit|     0  1  2  3  4  5  6  7  8  9
--------------------------------------
0 |    12 3 11 5 11 1 12 2 0 8
10 |    3 10 6 9 3 8
--------------------------------------

==================================================================
2.dqs window
x=pass dqs delay value (min~max)center
y=0-7bit DQ of every group
input delay:DQS0 =29 DQS1 = 29
==================================================================
bit     DQS0     bit      DQS1
0  (1~58)29  8  (1~54)27
1  (1~52)26  9  (1~53)27
2  (1~56)28  10  (1~52)26
3  (1~54)27  11  (1~55)28
4  (1~58)29  12  (1~57)29
5  (1~51)26  13  (1~55)28
6  (1~58)29  14  (1~56)28
7  (1~56)28  15  (1~56)28
==================================================================
3.dq delay value last
==================================================================
bit|    0  1  2  3  4  5  6  7  8   9
--------------------------------------
0 |    12 6 12 7 11 4 12 3 2 10
10 |    6 11 6 10 4 9
==================================================================
==================================================================
     TX  perbyte calibration
==================================================================
DQS loop = 15, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqsdly_pass[0]=15,  finish count=1
dqs_perbyte_dly.last_dqsdly_pass[1]=15,  finish count=2
DQ loop=15, cmp_err_1 = ffff01aa
DQ loop=14, cmp_err_1 = ffff01aa
DQ loop=13, cmp_err_1 = ffff00aa
dqs_perbyte_dly.last_dqdly_pass[1]=13,  finish count=1
DQ loop=12, cmp_err_1 = ffff0000
dqs_perbyte_dly.last_dqdly_pass[0]=12,  finish count=2
byte:0, (DQS,DQ)=(9,8)
byte:1, (DQS,DQ)=(9,8)
20,data:99
[EMI] DRAMC calibration passed

===================================================================
                MT7621   stage1 code done
                CPU=50000000 HZ BUS=16666666 HZ
===================================================================


U-Boot 1.1.3 (Aug  5 2016 - 15:06:22)

SERCOMM v1.03.0, Release date: 2016/08/05

Board: Ralink APSoC DRAM:  256 MB
relocate_code Pointer at: 8ffa8000

Config XHCI 40M PLL
Allocate 16 byte aligned buffer: 8ffdf070
Enable NFI Clock
# MTK NAND # : Use HW ECC
NAND ID [C2 F1 80 95 02]
Device found in MTK table, ID: c2f1, EXT_ID: 809502
Support this Device in MTK table! c2f1
select_chip
[NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Signature matched and data read!
load_fact_bbt success 1023
load fact bbt success
[mtk_nand] probe successfully!
mtd->writesize=2048 mtd->oobsize=64,    mtd->erasesize=131072  devinfo.iowidth=8
..============================================
Ralink UBoot Version: 5.0.0.0
--------------------------------------------
ASIC MT7621A DualCore (MAC to MT7530 Mode)
DRAM_CONF_FROM: Auto-Detection
DRAM_TYPE: DDR3
DRAM bus: 16 bit
Xtal Mode=3 OCP Ratio=1/3
Flash component: NAND Flash
Date:Aug  5 2016  Time:15:06:22
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:256, ways:4, linesz:32 ,total:32768

 ##### The CPU freq = 880 MHZ ####
 estimate memory size =256 Mbytes
#Reset_MT7530
set LAN/WAN WLLLL

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial.
   9: Load Boot Loader code then write to Flash via TFTP.                                                                                                                                                                  0

#### auto_recovery ####

check env def auto_recovery no
check env def auto_recovery yes
check env def boot_part 1
check env def boot_part_ready 3
enabled:1, boot_part:1, boot_part_ready:3
..nand read ret = 0x20000
boot_count:1, next_record:34
boot_count:1, next_record:34

3: System Boot system code via Flash.
## Booting image at bc180000 ...
   Image Name:   Linksys EA8100 Router
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    2365554 Bytes =  2.3 MB
   Load Address: 80001000
   Entry Point:  8000d1d0
.....................................   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 8000d1d0) ...
## Giving linux memsize in MB, 256

Starting kernel ...


LINUX started...

 THIS IS ASIC

SDK 5.0.S.0
Initializing cgroup subsys cpu
Linux version 2.6.36 (root@build-vm) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #81 SMP Tue Apr 24 06:24:25 PDT 2018

 The CPU feqenuce set to 880 MHz
GCMP present
CPU revision is: 0001992f (MIPS 1004Kc)
Software DMA cache coherency
Determined physical RAM map:
 memory: 10000000 @ 00000000 (usable)
Zone PFN ranges:
  DMA      0x00000000 -> 0x0000c000
  Normal   0x0000c000 -> 0x00010000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00010000
Detected 3 available secondary CPU(s)
PERCPU: Embedded 7 pages/cpu @8c204000 s6912 r8192 d13568 u65536
pcpu-alloc: s6912 r8192 d13568 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock6 ro rootfstype=jffs2 init=/sbin/init
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Writing ErrCtl register=0002c400
Readback ErrCtl register=0002c400
allocated 1310720 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 251276k/262144k available (5029k kernel code, 10868k reserved, 1589k data, 228k init, 0k highmem)
Hierarchical RCU implementation.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:128
Trying to install interrupt handler for IRQ24
Trying to install interrupt handler for IRQ25
Trying to install interrupt handler for IRQ22
Trying to install interrupt handler for IRQ9
Trying to install interrupt handler for IRQ10
Trying to install interrupt handler for IRQ11
Trying to install interrupt handler for IRQ12
Trying to install interrupt handler for IRQ13
Trying to install interrupt handler for IRQ14
Trying to install interrupt handler for IRQ16
Trying to install interrupt handler for IRQ17
Trying to install interrupt handler for IRQ18
Trying to install interrupt handler for IRQ19
Trying to install interrupt handler for IRQ20
Trying to install interrupt handler for IRQ21
Trying to install interrupt handler for IRQ23
Trying to install interrupt handler for IRQ26
Trying to install interrupt handler for IRQ27
Trying to install interrupt handler for IRQ28
Trying to install interrupt handler for IRQ15
Trying to install interrupt handler for IRQ8
Trying to install interrupt handler for IRQ29
Trying to install interrupt handler for IRQ30
Trying to install interrupt handler for IRQ31
console [ttyS1] enabled
Calibrating delay loop... 561.15 BogoMIPS (lpj=1122304)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
launch: starting cpu1
launch: cpu1 gone!
CPU revision is: 0001992f (MIPS 1004Kc)
Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
launch: starting cpu2
launch: cpu2 gone!
CPU revision is: 0001992f (MIPS 1004Kc)
Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
launch: starting cpu3
launch: cpu3 gone!
CPU revision is: 0001992f (MIPS 1004Kc)
Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
Brought up 4 CPUs
Synchronize counters across 4 CPUs: done.
devtmpfs: initialized
NET: Registered protocol family 16
release PCIe RST: RALINK_RSTCTRL = 7000000
PCIE PHY initialize
***** Xtal 40MHz *****
start MT7621 PCIe register access
RALINK_RSTCTRL = 7000000
RALINK_CLKCFG1 = 77ffeff8

*************** MT7621 PCIe RC mode *************
PCIE2 no card, disable it(RST&CLK)
pcie_link status = 0x3
RALINK_RSTCTRL= 3000000
*** Configure Device number setting of Virtual PCI-PCI bridge ***
RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
PCIE0 enabled
PCIE1 enabled
interrupt enable status: 300000
Port 1 N_FTS = 1b105000
Port 0 N_FTS = 1b105000
config reg done
init_rt2880pci done
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
pci 0000:00:00.0: BAR 1: set to [mem 0x60200000-0x6020ffff] (PCI address [0x60200000-0x6020ffff]
pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
pci 0000:00:01.0: BAR 1: set to [mem 0x60210000-0x6021ffff] (PCI address [0x60210000-0x6021ffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
pci 0000:01:00.0: BAR 0: set to [mem 0x60000000-0x600fffff 64bit] (PCI address [0x60000000-0x600fffff]
pci 0000:00:00.0: PCI bridge to [bus 01-01]
pci 0000:00:00.0:   bridge window [io  disabled]
pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
pci 0000:00:00.0:   bridge window [mem pref disabled]
pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
pci 0000:02:00.0: BAR 0: set to [mem 0x60100000-0x601fffff 64bit] (PCI address [0x60100000-0x601fffff]
pci 0000:00:01.0: PCI bridge to [bus 02-02]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0x60100000-0x601fffff]
pci 0000:00:01.0:   bridge window [mem pref disabled]
PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
BAR0 at slot 0 = 0
bus=0x0, slot = 0x0
res[0]->start = 0
res[0]->end = 0
res[1]->start = 60200000
res[1]->end = 6020ffff
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
BAR0 at slot 1 = 0
bus=0x0, slot = 0x1
res[0]->start = 0
res[0]->end = 0
res[1]->start = 60210000
res[1]->end = 6021ffff
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x1, slot = 0x0, irq=0x4
res[0]->start = 60000000
res[0]->end = 600fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
bus=0x2, slot = 0x1, irq=0x18
res[0]->start = 60100000
res[0]->end = 601fffff
res[1]->start = 0
res[1]->end = 0
res[2]->start = 0
res[2]->end = 0
res[3]->start = 0
res[3]->end = 0
res[4]->start = 0
res[4]->end = 0
res[5]->start = 0
res[5]->end = 0
Switching to clocksource Ralink Systick timer
NET: Registered protocol family 2
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode:
Clockevents: could not switch to one-shot mode: MIPS is not functional.
 MIPS is not functional.
 MIPS is not functional.
Could not switch to high resolution mode on CPU 2
Could not switch to high resolution mode on CPU 1
Could not switch to high resolution mode on CPU 0
 MIPS is not functional.
Could not switch to high resolution mode on CPU 3
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
UDP hash table entries: 128 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
4 CPUs re-calibrate udelay(lpj = 1167360)
Load Kernel WDG Timer Module
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2 (NAND) (ZLIB) (LZO) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
fuse init (API version 7.15)
msgmni has been set to 490
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered (default)
register power led blinking slow.
register wps led off.
Ralink gpio driver initialized
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
brd: module loaded
loop: module loaded
MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
Allocate 16 byte aligned buffer: 806e7070
Enable NFI Clock
# MTK NAND # : Use HW ECC
NAND ID [C2 F1 80 95 02, 00809502]
Device not found, ID: c2f1
Not Support this Device!
chip_mode=00000001
Support this Device in MTK table! c2f1
NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
[NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
Scanning device for bad blocks
Bad eraseblock 71 at 0x0000008e0000
Bad eraseblock 349 at 0x000002ba0000
Bad eraseblock 374 at 0x000002ec0000
Bad eraseblock 397 at 0x0000031a0000
Bad eraseblock 456 at 0x000003900000
Bad eraseblock 502 at 0x000003ec0000
Bad eraseblock 540 at 0x000004380000
Bad eraseblock 588 at 0x000004980000
Bad eraseblock 810 at 0x000006540000
Bad eraseblock 885 at 0x000006ea0000
Signature matched and data read!
load_fact_bbt success 1023
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 30 00 00
00 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 30 00 00
00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Creating 12 MTD partitions on "MT7621-NAND":
0x000000000000-0x000007f80000 : "ALL"
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x0000000c0000 : "u_env"
0x0000000c0000-0x000000100000 : "Factory"
0x000000100000-0x000000140000 : "s_env"
0x000000140000-0x000000180000 : "devinfo"
0x000000180000-0x000002980000 : "kernel"
0x000000580000-0x000002980000 : "rootfs"
0x000002980000-0x000005180000 : "alt_kernel"
0x000002d80000-0x000005180000 : "alt_rootfs"
0x000005180000-0x000005280000 : "sysdiag"
0x000005280000-0x000007f80000 : "syscfg"
[mtk_nand] probe successfully!
rdm_major = 253
GMAC1_MAC_ADRH -- : 0x0000000c
GMAC1_MAC_ADRL -- : 0x432880f1
Ralink APSoC Ethernet Driver Initilization. v3.1  1024 rx/tx descriptors allocated, mtu = 1500!
GMAC1_MAC_ADRH -- : 0x0000000c
GMAC1_MAC_ADRL -- : 0x432880f0
PROC INIT OK!
Customize GPIO mode.change I2C & JTAG to GPIO mode.
org gpio_mode: 000a05a8
update gpio_mode: 000a05ac
new gpio_mode: 000a05ac
Check Eth LED.
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
FM_OUT value: u4FmOut = 0(0x00000000)
xhc_mtk xhc_mtk: xHCI Host Controller
xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1
xhc_mtk xhc_mtk: irq 22, io mem 0x1e1c0000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhc_mtk xhc_mtk: xHCI Host Controller
xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mt_msdc_init: !!!!! SDXC Module Initialize Fail !!!!!
u32 classifier
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3926 buckets, 15704 max)
ctnetlink v0.93: registering with nfnetlink.
nf_conntrack_rtsp v0.6.21 loading
IPVS: Registered protocols ()
IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
IPVS: ipvs loaded.
IPv4 over IPv4 tunneling driver
GRE over IPv4 demultiplexor driver
gre: can't add protocol
nf_nat_rtsp v0.6.21 loading
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Registering the dns_resolver key type
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x0527 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x740d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0xdf5a instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000000c: 0x2400 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x0080 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0x0080 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0x881f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0x0505 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x694c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000024: 0x7973 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x6210 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x3271 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020008: 0x9ab7 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0x23d4 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020010: 0xf355 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020014: 0x223b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0x327e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0xd3c5 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0x4a17 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0xcd6a instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0003efe8
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x1e9f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0x4c7d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0x7708 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004000c: 0x331d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040010: 0x64fd instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040014: 0x1338 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0x116a instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0xe09b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0x8cf3 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0xcbdc instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0xb071 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0x4e30 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0x0de4 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006000c: 0x84e9 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060010: 0x26b4 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060014: 0x0623 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0x1130 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0xd725 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0x82c9 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0xddfe instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0xe24b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0x055b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0x0340 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0x79e2 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0x23f6 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0xafef instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0xb97e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0xb8a6 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0x2c40 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0xed87 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0000: 0x5760 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0004: 0x4adb instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0008: 0x5d05 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a000c: 0x25ea instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0010: 0x98b1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0014: 0x1caf instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0018: 0x071f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a001c: 0x3bbc instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0020: 0x62e0 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0024: 0xe18a instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x000a4108
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0000: 0x1a57 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0004: 0x29f7 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0008: 0x1b85 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c000c: 0x41f0 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0010: 0xcde5 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0014: 0x84b7 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0018: 0xcad4 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c001c: 0x98a1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0020: 0xdc36 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0024: 0x22d4 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0000: 0xc5ae instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0004: 0xc23b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0008: 0xf17b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e000c: 0xe3c4 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0010: 0x2697 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0014: 0x84b6 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0018: 0x8b8f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e001c: 0xe870 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0020: 0x3f56 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0024: 0x6e6b instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100000: 0x4149 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100004: 0xe85b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100008: 0x094e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010000c: 0x7772 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100010: 0xd114 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100014: 0x34f5 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100018: 0x11f9 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010001c: 0x3ec2 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100020: 0xdb3a instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100024: 0x32ca instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x001117f4
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120000: 0x8f2e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120004: 0x68d9 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120008: 0xcdc1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012000c: 0xaf51 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120010: 0x2fcb instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120014: 0xce0d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120018: 0x4a65 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012001c: 0xe087 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120020: 0x0d2c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120024: 0xca8e instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140000: 0xb992 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140004: 0xd59e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140008: 0x92a5 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014000c: 0x4983 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140010: 0xf0d8 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140014: 0x0066 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140018: 0xa2a1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014001c: 0x49f8 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140020: 0xa8a1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140024: 0x82d5 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160000: 0xce0b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160004: 0x74bb instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160008: 0x67b6 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016000c: 0x6d88 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160010: 0x6e4a instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160014: 0x31cd instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160018: 0x10f2 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016001c: 0x0460 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160020: 0x2b19 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160024: 0xd636 instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x00172c10
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180000: 0xc161 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180004: 0x43e8 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180008: 0x71af instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018000c: 0xddb5 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180010: 0xdde3 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180014: 0x7a70 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180018: 0xd63b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018001c: 0xd9b9 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180020: 0x7b77 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180024: 0x02de instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x001879e8
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0000: 0x4b1d instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0004: 0x11cf instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0008: 0x9574 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a000c: 0x5785 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0010: 0x34d0 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0014: 0xc5be instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0018: 0x1c1b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a001c: 0x9f73 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0020: 0x0f56 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0024: 0x2d01 instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x001a052c
You cannot use older JFFS2 filesystems with newer kernels
Old JFFS2 bitmask found at 0x001b7b0c
You cannot use older JFFS2 filesystems with newer kernels
Old JFFS2 bitmask found at 0x001bf9a0
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0000: 0xed44 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0004: 0x8ae2 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0008: 0xed37 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c000c: 0xbb13 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0010: 0x33b4 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0014: 0x49bc instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0018: 0x8e77 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c001c: 0x7445 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0020: 0xb2bd instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0024: 0x7454 instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x001ca158
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0000: 0xf379 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0004: 0x2aa7 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0008: 0xacdc instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e000c: 0x4cc7 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0010: 0xd39b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0014: 0x876b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0018: 0x63a1 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e001c: 0x5d67 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0020: 0x6a22 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0024: 0xeb12 instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200000: 0x4c5c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200004: 0xa2e3 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200008: 0xaadf instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020000c: 0x7c35 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200010: 0xafab instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200014: 0xb8df instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200018: 0xc1fc instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020001c: 0x9955 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200020: 0xfa30 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200024: 0x7a3a instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0021d228
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220000: 0x3636 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220004: 0xa16e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220008: 0x41ab instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022000c: 0xf028 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220010: 0x90f6 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220014: 0xa2c7 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220018: 0x93fd instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022001c: 0x7a95 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220020: 0x6b27 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220024: 0x7021 instead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0022d858
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240000: 0x4f17 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240004: 0xef19 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240008: 0x5beb instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024000c: 0xb789 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240010: 0xdfdd instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240014: 0xab1c instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240018: 0x83e6 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024001c: 0x4a2e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240020: 0xe8f5 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240024: 0x511d instead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080000: 0x4c2e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080004: 0x534b instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080008: 0x302e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0208000c: 0x3030 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080010: 0x4537 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080014: 0x3031 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080018: 0x2020 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0208001c: 0x2020 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080020: 0x3830 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080024: 0x3539 instead
Further such events for this erase block will not be printed
VFS: Mounted root (jffs2 filesystem) readonly on device 31:6.
devtmpfs: mounted
Freeing unused kernel memory: 228k freed
*********************************************************************************
              _        _  __    _    __ _____ __   __ _____
             | |      | ||  \  | |  / // ____]\ \ / // ____]TM
             | |      | ||   \ | | / /| (___   \ V /| (____
             | |      | || |\ \| |\ \  \____ \  \ /  \____ \
             | |_____ | || | \   | \ \  ____) | | |   ____) |
             |_______||_||_|  \__|  \_\[____ /  |_|  [_____/

 (c) 2013 Belkin International, Inc. and/or its affiliates. All rights reserved.
 Booting cocoon (firmware version 1.0.1.188217)
*********************************************************************************
[utopia][init] System Initialization
[utopia][init] Creating /proc
[utopia][init] Creating /sys
[utopia][init] Creating /dev
[utopia][init] Creating /tmp
[utopia][init] Allocating 40M for /tmp
[utopia][init] Prepairing /dev/pts
[utopia][init] Setting /tmp and /var permissions
[utopia][init] Starting udev..
bdutil board utility kernel module, version 1.4
bdutil board utility kernel module boardId (0)
bdutil board utility LED kernel module, version 1.0
Attempting mount of ubifs syscfg partition
UBI device number 0, total 358 LEBs (45457408 bytes, 43.4 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
[utopia][init] Using persistent syscfg data from /var/config/syscfg
[utopia][init] Starting system logging
[utopia][init] Starting sysevent subsystem
net.netfilter.nf_conntrack_acct = 1
[utopia][init] Setting any unset system values to default
[utopia][init] no persistence config file (/var/config/pstcfg) found
setting up MAC addresses for all interface based on 24:F5:A2:56:40:46
Updating NTP Servers if necessary
Unit Model (EA8100) matches Firmware image (EA8100)
Cannot find device "eth3"
restore GSW to dump switch mode
REG_ESW_WT_MAC_ATC is 0x7ff0002
done.
checking for interactive script start up...
Updating BootCount Page[35]:11800 ... Done

[utopia][init] Starting bdutil daemon
attempting to sync sysinfo.cgi auth credentials
BDUTIL daemon mode (Focus/MTK)
Sat Dec  8 15:53:00 UTC 2018
restore GSW to dump switch mode
REG_ESW_WT_MAC_ATC is 0x7ff0002
done.

(none) login: udhcpc (v1.15.2) started
Sending discover...
wan, sysevent received: phylink_wan_state
Sending discover...
Sending discover...
wifi, sysevent received: lan-started
wifi, service_start()
Lighttpd Model Base: EA8100
Generating Rainier lighttpd config
wifi, wifi_onetime_setting
wifi, loading Wi-Fi driver
Build temporary www configuration directory:
$1$8Frh9urF$TZetgIfYebFxpXFqhJKEr.
Registering Service Linksys12182._http._tcp.local port 80
file_sharing, smp wifi
eth2/eth3 RPS: CPU0/1
starting /sbin/nmbd for bridge mode
Got a reply for Linksys12182._http._tcp.local.: Name now registered and active
Starting smbd ...
Multiple power table is not supported on boards that hw_revision=1
Channel list is available. Do nothing
wifi cache: saving wl0 physical settings
wifi cache: saving wl1 physical settings
wifi cache: saving wl0 virtual settings
wifi cache: saving wl1 virtual settings
wifi cache: saving wl0 guest settings
wifi cache: saving wl1 guest settings
wifi cache: saving wl0 simpletap settings
wifi cache: saving wl1 simpletap settings
Multi-region is not supported or not enabled
Cert region: AH
EA8100 product, checking 5G channel list.
channel list does not change.
killall: iwevent: no process killed
Waiting for Wireless Events from interfaces...
wifi, Multi-region is not supported or not enabled
wifi, Cert region: AH
wifi, ETxBfEnCond 0
wifi, ETxBfEnCond 1
wifi, MU-MIMO enabled
wifi, PMF disabled
wifi, HT_RDG 1
wifi, 256QAM enabled
wifi, BGProtection 1
wifi, ra0 setting rts thresh
wifi, HT_STBC 0
wifi, VHT_STBC 0
wifi, ra0 htduplicate enabled
wifi, ra0 setting framentation thresh
wifi, DFS disabled
wifi, TxBurst 1
wscd: SSDP UDP PORT = 1900
wifi, wifi_physical_start(ra0)
wifi, wifi_virtual_start(ra0)
wifi, wifi_user_start(ra0)
Not ready for JNAP. Sleeping for 15 seconds...
Sending discover...
Sending discover...
Sending discover...
Restarting nfqrecv service...
wifi, ra0 is up
nfq_create_queue() failed
wifi, wifi_guest_start(ra0)
wifi, Do not start guest network in bridge mode
wifi, Multi-region is not supported or not enabled
wifi, Cert region: AH
wifi, ETxBfEnCond 0
wifi, ETxBfEnCond 1
wifi, MU-MIMO enabled
wifi, PMF disabled
wifi, HT_RDG 1
wifi, 256QAM disabled
wifi, rai0 VhtBw=1 (80 MHz)
wifi, rai0 setting rts thresh
wifi, HT_STBC 1
wifi, VHT_STBC 0
wifi, rai0 htduplicate enabled
wifi, rai0 setting framentation thresh
wifi, DFS enabled
wscd: SSDP UDP PORT = 1900
wifi, TxBurst 1
wifi, wifi_physical_start(rai0)
wifi, wifi_virtual_start(rai0)
wifi, wifi_user_start(rai0)
wifi, rai0 is up
wifi, wifi_guest_start(rai0)
wifi, Do not start guest network in bridge mode
route: SIOCADDRT: File exists
wifi, restart wscd
killall: wscd: no process killed
wscd: SSDP UDP PORT = 1900
wifi, set wifi hw nat
Sending discover...
[fw.sh] fwup_checked_after_boot: 0
[fwupd] status details:"ERROR: Connecting server"
[fw.sh] fwup_forced_update: 0
Linksys12182 login: Sending discover...
Sending discover...
wifi, smp wifi
wscd: SSDP UDP PORT = 1900
eth2/eth3 RPS: CPU0/2
Sending discover...
Sending discover...
Sending discover...

Linksys12182 login:
Linksys12182 login: Sending discover...

Linksys12182 login: [fw.sh] fwup_checked_after_boot: 0
Sending discover...
[fwupd] status details:"ERROR: Connecting server"
[fw.sh] fwup_forced_update: 0
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...

[fw.sh] fwup_checked_after_boot: 0
Sending discover...
Linksys12182 login: [fwupd] status details:"ERROR: Connecting server"
[fw.sh] fwup_forced_update: 0
Sending discover...
Sending discover...
Sending discover...
Sending discover...

Login timed out
Linksys12182 login: Sending discover...
Sending discover...
[fw.sh] fwup_checked_after_boot: 0
Sending discover...
[fwupd] status details:"ERROR: Connecting server"
[fw.sh] fwup_forced_update: 0
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
[fw.sh] fwup_checked_after_boot: 0
Sending discover...
[fwupd] status details:"ERROR: Connecting server"
[fw.sh] fwup_forced_update: 0
Sending discover...
Sending discover...
Sending discover...

If tftp:

Please choose the operation:
   1: Load system code to SDRAM via TFTP.
   2: Load system code then write to Flash via TFTP.
   3: Boot system code via Flash (default).
   4: Entr boot command line interface.
   7: Load Boot Loader code then write to Flash via Serial.
   9: Load Boot Loader code then write to Flash via TFTP.                                                                                                                                                                  4
You choosed 1
                                                                                                                                                                                                                           0

  
1: System Load Linux to SDRAM via TFTP.
 Please Input new ones /or Ctrl-C to discard
        Input device IP (192.168.1.1) ==:192.168.1.1
        Input server IP (192.168.1.180) ==:192.168.1.180
        Input Linux Kernel filename (atlanta.img) ==:FW_EA8100_1.0.1.188217_prod.img

 NetTxPacket = 0x8FFE3200

 KSEG1ADDR(NetTxPacket) = 0xAFFE3200

 NetLoop,call eth_halt !

 NetLoop,call eth_init !
Trying Eth0 (10/100-M)

 Waitting for RX_DMA_BUSY status Start... done


 ETH_STATE_ACTIVE!!
TFTP from server 192.168.1.180; our IP address is 192.168.1.1
Filename 'FW_EA8100_1.0.1.188217_prod.img'.

 TIMEOUT_COUNT=10,Load address: 0x80a00000
Loading: T T T T T T T T T T
Retry count exceeded; starting again

ArpTimeoutCheck 

file FW_EA8100_1.0.1.188217_prod.img loadable via tftp:

FW_EA8100_1.0.1.188217_prod.img: u-boot legacy uImage, Linksys EA8100 Router, Linux/MIPS, OS Kernel Image (lzma), 2365554 bytes, Tue Apr 24 13:24:45 2018, Load Address: 0x80001000, Entry Point: 0x8000D1D0, Header CRC: 0x0D741713, Data CRC: 0x1F88C713

Openwrt here