Wiki source code of Linksys EA8100

Last modified by Leon Poon on 2019/09/08 21:47

Show last authors
1 [[url:https://www.linksys.com/sg/p/P-EA8100/]]
2
3 Linksys EA8100 Max-Streamâ„¢ AC2600 MU-MIMO Gigabit WiFi Router
4
5 Dev wiki: [[url:https://wikidevi.com/wiki/Linksys_EA8100]]
6
7 [[image:ea8100_circuit.jpg]]
8
9 UART: 3.3v 115200.
10
11 {{code language="plain"}}
12 ===================================================================
13 MT7621 stage1 code 10:33:11 (ASIC)
14 CPU=50000000 HZ BUS=16666666 HZ
15 ==================================================================
16 Change MPLL source from XTAL to CR...
17 do MEMPLL setting..
18 MEMPLL Config : 0x11100000
19 3PLL mode + External loopback
20 === XTAL-40Mhz === DDR-1200Mhz ===
21 PLL2 FB_DL: 0xe, 1/0 = 621/403 39000000
22 PLL3 FB_DL: 0x10, 1/0 = 646/378 41000000
23 PLL4 FB_DL: 0x1a, 1/0 = 533/491 69000000
24 do DDR setting..[00320381]
25 Apply DDR3 Setting...(use customer AC)
26 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
27 --------------------------------------------------------------------------------
28 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
29 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
30 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
32 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
33 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
34 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
35 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
36 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
37 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
38 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
39 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
40 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
41 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
42 000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
43 000F:| 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0
44 0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
45 0011:| 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
46 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
47 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
48 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
49 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
50 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
51 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
52 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
53 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
54 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
55 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
56 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
57 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
58 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
59 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
60 rank 0 coarse = 15
61 rank 0 fine = 72
62 B:| 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0
63 opt_dle value:10
64 DRAMC_R0DELDLY[018]=00001D1D
65 ==================================================================
66 RX DQS perbit delay software calibration
67 ==================================================================
68 1.0-15 bit dq delay value
69 ==================================================================
70 bit| 0 1 2 3 4 5 6 7 8 9
71 --------------------------------------
72 0 | 12 3 11 5 11 1 12 2 0 8
73 10 | 3 10 6 9 3 8
74 --------------------------------------
75
76 ==================================================================
77 2.dqs window
78 x=pass dqs delay value (min~max)center
79 y=0-7bit DQ of every group
80 input delay:DQS0 =29 DQS1 = 29
81 ==================================================================
82 bit DQS0 bit DQS1
83 0 (1~58)29 8 (1~54)27
84 1 (1~52)26 9 (1~53)27
85 2 (1~56)28 10 (1~52)26
86 3 (1~54)27 11 (1~55)28
87 4 (1~58)29 12 (1~57)29
88 5 (1~51)26 13 (1~55)28
89 6 (1~58)29 14 (1~56)28
90 7 (1~56)28 15 (1~56)28
91 ==================================================================
92 3.dq delay value last
93 ==================================================================
94 bit| 0 1 2 3 4 5 6 7 8 9
95 --------------------------------------
96 0 | 12 6 12 7 11 4 12 3 2 10
97 10 | 6 11 6 10 4 9
98 ==================================================================
99 ==================================================================
100 TX perbyte calibration
101 ==================================================================
102 DQS loop = 15, cmp_err_1 = ffff0000
103 dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
104 dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
105 DQ loop=15, cmp_err_1 = ffff01aa
106 DQ loop=14, cmp_err_1 = ffff01aa
107 DQ loop=13, cmp_err_1 = ffff00aa
108 dqs_perbyte_dly.last_dqdly_pass[1]=13, finish count=1
109 DQ loop=12, cmp_err_1 = ffff0000
110 dqs_perbyte_dly.last_dqdly_pass[0]=12, finish count=2
111 byte:0, (DQS,DQ)=(9,8)
112 byte:1, (DQS,DQ)=(9,8)
113 20,data:99
114 [EMI] DRAMC calibration passed
115
116 ===================================================================
117 MT7621 stage1 code done
118 CPU=50000000 HZ BUS=16666666 HZ
119 ===================================================================
120
121
122 U-Boot 1.1.3 (Aug 5 2016 - 15:06:22)
123
124 SERCOMM v1.03.0, Release date: 2016/08/05
125
126 Board: Ralink APSoC DRAM: 256 MB
127 relocate_code Pointer at: 8ffa8000
128
129 Config XHCI 40M PLL
130 Allocate 16 byte aligned buffer: 8ffdf070
131 Enable NFI Clock
132 # MTK NAND # : Use HW ECC
133 NAND ID [C2 F1 80 95 02]
134 Device found in MTK table, ID: c2f1, EXT_ID: 809502
135 Support this Device in MTK table! c2f1
136 select_chip
137 [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
138 Signature matched and data read!
139 load_fact_bbt success 1023
140 load fact bbt success
141 [mtk_nand] probe successfully!
142 mtd->writesize=2048 mtd->oobsize=64, mtd->erasesize=131072 devinfo.iowidth=8
143 ..============================================
144 Ralink UBoot Version: 5.0.0.0
145 --------------------------------------------
146 ASIC MT7621A DualCore (MAC to MT7530 Mode)
147 DRAM_CONF_FROM: Auto-Detection
148 DRAM_TYPE: DDR3
149 DRAM bus: 16 bit
150 Xtal Mode=3 OCP Ratio=1/3
151 Flash component: NAND Flash
152 Date:Aug 5 2016 Time:15:06:22
153 ============================================
154 icache: sets:256, ways:4, linesz:32 ,total:32768
155 dcache: sets:256, ways:4, linesz:32 ,total:32768
156
157 ##### The CPU freq = 880 MHZ ####
158 estimate memory size =256 Mbytes
159 #Reset_MT7530
160 set LAN/WAN WLLLL
161
162 Please choose the operation:
163 1: Load system code to SDRAM via TFTP.
164 2: Load system code then write to Flash via TFTP.
165 3: Boot system code via Flash (default).
166 4: Entr boot command line interface.
167 7: Load Boot Loader code then write to Flash via Serial.
168 9: Load Boot Loader code then write to Flash via TFTP. 0
169
170 #### auto_recovery ####
171
172 check env def auto_recovery no
173 check env def auto_recovery yes
174 check env def boot_part 1
175 check env def boot_part_ready 3
176 enabled:1, boot_part:1, boot_part_ready:3
177 ..nand read ret = 0x20000
178 boot_count:1, next_record:34
179 boot_count:1, next_record:34
180
181 3: System Boot system code via Flash.
182 ## Booting image at bc180000 ...
183 Image Name: Linksys EA8100 Router
184 Image Type: MIPS Linux Kernel Image (lzma compressed)
185 Data Size: 2365554 Bytes = 2.3 MB
186 Load Address: 80001000
187 Entry Point: 8000d1d0
188 ..................................... Verifying Checksum ... OK
189 Uncompressing Kernel Image ... OK
190 No initrd
191 ## Transferring control to Linux (at address 8000d1d0) ...
192 ## Giving linux memsize in MB, 256
193
194 Starting kernel ...
195
196
197 LINUX started...
198
199 THIS IS ASIC
200
201 SDK 5.0.S.0
202 Initializing cgroup subsys cpu
203 Linux version 2.6.36 (root@build-vm) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #81 SMP Tue Apr 24 06:24:25 PDT 2018
204
205 The CPU feqenuce set to 880 MHz
206 GCMP present
207 CPU revision is: 0001992f (MIPS 1004Kc)
208 Software DMA cache coherency
209 Determined physical RAM map:
210 memory: 10000000 @ 00000000 (usable)
211 Zone PFN ranges:
212 DMA 0x00000000 -> 0x0000c000
213 Normal 0x0000c000 -> 0x00010000
214 Movable zone start PFN for each node
215 early_node_map[1] active PFN ranges
216 0: 0x00000000 -> 0x00010000
217 Detected 3 available secondary CPU(s)
218 PERCPU: Embedded 7 pages/cpu @8c204000 s6912 r8192 d13568 u65536
219 pcpu-alloc: s6912 r8192 d13568 u65536 alloc=16*4096
220 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
221 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
222 Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock6 ro rootfstype=jffs2 init=/sbin/init
223 PID hash table entries: 1024 (order: 0, 4096 bytes)
224 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
225 Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
226 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
227 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
228 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
229 Writing ErrCtl register=0002c400
230 Readback ErrCtl register=0002c400
231 allocated 1310720 bytes of page_cgroup
232 please try 'cgroup_disable=memory' option if you don't want memory cgroups
233 Memory: 251276k/262144k available (5029k kernel code, 10868k reserved, 1589k data, 228k init, 0k highmem)
234 Hierarchical RCU implementation.
235 Verbose stalled-CPUs detection is disabled.
236 NR_IRQS:128
237 Trying to install interrupt handler for IRQ24
238 Trying to install interrupt handler for IRQ25
239 Trying to install interrupt handler for IRQ22
240 Trying to install interrupt handler for IRQ9
241 Trying to install interrupt handler for IRQ10
242 Trying to install interrupt handler for IRQ11
243 Trying to install interrupt handler for IRQ12
244 Trying to install interrupt handler for IRQ13
245 Trying to install interrupt handler for IRQ14
246 Trying to install interrupt handler for IRQ16
247 Trying to install interrupt handler for IRQ17
248 Trying to install interrupt handler for IRQ18
249 Trying to install interrupt handler for IRQ19
250 Trying to install interrupt handler for IRQ20
251 Trying to install interrupt handler for IRQ21
252 Trying to install interrupt handler for IRQ23
253 Trying to install interrupt handler for IRQ26
254 Trying to install interrupt handler for IRQ27
255 Trying to install interrupt handler for IRQ28
256 Trying to install interrupt handler for IRQ15
257 Trying to install interrupt handler for IRQ8
258 Trying to install interrupt handler for IRQ29
259 Trying to install interrupt handler for IRQ30
260 Trying to install interrupt handler for IRQ31
261 console [ttyS1] enabled
262 Calibrating delay loop... 561.15 BogoMIPS (lpj=1122304)
263 pid_max: default: 32768 minimum: 301
264 Mount-cache hash table entries: 512
265 Initializing cgroup subsys memory
266 launch: starting cpu1
267 launch: cpu1 gone!
268 CPU revision is: 0001992f (MIPS 1004Kc)
269 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
270 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
271 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
272 launch: starting cpu2
273 launch: cpu2 gone!
274 CPU revision is: 0001992f (MIPS 1004Kc)
275 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
276 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
277 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
278 launch: starting cpu3
279 launch: cpu3 gone!
280 CPU revision is: 0001992f (MIPS 1004Kc)
281 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
282 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
283 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
284 Brought up 4 CPUs
285 Synchronize counters across 4 CPUs: done.
286 devtmpfs: initialized
287 NET: Registered protocol family 16
288 release PCIe RST: RALINK_RSTCTRL = 7000000
289 PCIE PHY initialize
290 ***** Xtal 40MHz *****
291 start MT7621 PCIe register access
292 RALINK_RSTCTRL = 7000000
293 RALINK_CLKCFG1 = 77ffeff8
294
295 *************** MT7621 PCIe RC mode *************
296 PCIE2 no card, disable it(RST&CLK)
297 pcie_link status = 0x3
298 RALINK_RSTCTRL= 3000000
299 *** Configure Device number setting of Virtual PCI-PCI bridge ***
300 RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
301 PCIE0 enabled
302 PCIE1 enabled
303 interrupt enable status: 300000
304 Port 1 N_FTS = 1b105000
305 Port 0 N_FTS = 1b105000
306 config reg done
307 init_rt2880pci done
308 bio: create slab <bio-0> at 0
309 vgaarb: loaded
310 SCSI subsystem initialized
311 usbcore: registered new interface driver usbfs
312 usbcore: registered new interface driver hub
313 usbcore: registered new device driver usb
314 pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
315 pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
316 pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
317 pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
318 pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
319 pci 0000:00:00.0: BAR 1: set to [mem 0x60200000-0x6020ffff] (PCI address [0x60200000-0x6020ffff]
320 pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
321 pci 0000:00:01.0: BAR 1: set to [mem 0x60210000-0x6021ffff] (PCI address [0x60210000-0x6021ffff]
322 pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
323 pci 0000:01:00.0: BAR 0: set to [mem 0x60000000-0x600fffff 64bit] (PCI address [0x60000000-0x600fffff]
324 pci 0000:00:00.0: PCI bridge to [bus 01-01]
325 pci 0000:00:00.0: bridge window [io disabled]
326 pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
327 pci 0000:00:00.0: bridge window [mem pref disabled]
328 pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
329 pci 0000:02:00.0: BAR 0: set to [mem 0x60100000-0x601fffff 64bit] (PCI address [0x60100000-0x601fffff]
330 pci 0000:00:01.0: PCI bridge to [bus 02-02]
331 pci 0000:00:01.0: bridge window [io disabled]
332 pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
333 pci 0000:00:01.0: bridge window [mem pref disabled]
334 PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
335 PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
336 BAR0 at slot 0 = 0
337 bus=0x0, slot = 0x0
338 res[0]->start = 0
339 res[0]->end = 0
340 res[1]->start = 60200000
341 res[1]->end = 6020ffff
342 res[2]->start = 0
343 res[2]->end = 0
344 res[3]->start = 0
345 res[3]->end = 0
346 res[4]->start = 0
347 res[4]->end = 0
348 res[5]->start = 0
349 res[5]->end = 0
350 BAR0 at slot 1 = 0
351 bus=0x0, slot = 0x1
352 res[0]->start = 0
353 res[0]->end = 0
354 res[1]->start = 60210000
355 res[1]->end = 6021ffff
356 res[2]->start = 0
357 res[2]->end = 0
358 res[3]->start = 0
359 res[3]->end = 0
360 res[4]->start = 0
361 res[4]->end = 0
362 res[5]->start = 0
363 res[5]->end = 0
364 bus=0x1, slot = 0x0, irq=0x4
365 res[0]->start = 60000000
366 res[0]->end = 600fffff
367 res[1]->start = 0
368 res[1]->end = 0
369 res[2]->start = 0
370 res[2]->end = 0
371 res[3]->start = 0
372 res[3]->end = 0
373 res[4]->start = 0
374 res[4]->end = 0
375 res[5]->start = 0
376 res[5]->end = 0
377 bus=0x2, slot = 0x1, irq=0x18
378 res[0]->start = 60100000
379 res[0]->end = 601fffff
380 res[1]->start = 0
381 res[1]->end = 0
382 res[2]->start = 0
383 res[2]->end = 0
384 res[3]->start = 0
385 res[3]->end = 0
386 res[4]->start = 0
387 res[4]->end = 0
388 res[5]->start = 0
389 res[5]->end = 0
390 Switching to clocksource Ralink Systick timer
391 NET: Registered protocol family 2
392 Clockevents: could not switch to one-shot mode:
393 Clockevents: could not switch to one-shot mode:
394 Clockevents: could not switch to one-shot mode:
395 Clockevents: could not switch to one-shot mode: MIPS is not functional.
396 MIPS is not functional.
397 MIPS is not functional.
398 Could not switch to high resolution mode on CPU 2
399 Could not switch to high resolution mode on CPU 1
400 Could not switch to high resolution mode on CPU 0
401 MIPS is not functional.
402 Could not switch to high resolution mode on CPU 3
403 IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
404 TCP established hash table entries: 8192 (order: 4, 65536 bytes)
405 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
406 TCP: Hash tables configured (established 8192 bind 8192)
407 TCP reno registered
408 UDP hash table entries: 128 (order: 0, 4096 bytes)
409 UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
410 NET: Registered protocol family 1
411 RPC: Registered udp transport module.
412 RPC: Registered tcp transport module.
413 RPC: Registered tcp NFSv4.1 backchannel transport module.
414 4 CPUs re-calibrate udelay(lpj = 1167360)
415 Load Kernel WDG Timer Module
416 squashfs: version 4.0 (2009/01/31) Phillip Lougher
417 JFFS2 version 2.2 (NAND) (ZLIB) (LZO) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
418 fuse init (API version 7.15)
419 msgmni has been set to 490
420 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
421 io scheduler noop registered (default)
422 register power led blinking slow.
423 register wps led off.
424 Ralink gpio driver initialized
425 Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
426 serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
427 serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
428 brd: module loaded
429 loop: module loaded
430 MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
431 Allocate 16 byte aligned buffer: 806e7070
432 Enable NFI Clock
433 # MTK NAND # : Use HW ECC
434 NAND ID [C2 F1 80 95 02, 00809502]
435 Device not found, ID: c2f1
436 Not Support this Device!
437 chip_mode=00000001
438 Support this Device in MTK table! c2f1
439 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
440 [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
441 Scanning device for bad blocks
442 Bad eraseblock 71 at 0x0000008e0000
443 Bad eraseblock 349 at 0x000002ba0000
444 Bad eraseblock 374 at 0x000002ec0000
445 Bad eraseblock 397 at 0x0000031a0000
446 Bad eraseblock 456 at 0x000003900000
447 Bad eraseblock 502 at 0x000003ec0000
448 Bad eraseblock 540 at 0x000004380000
449 Bad eraseblock 588 at 0x000004980000
450 Bad eraseblock 810 at 0x000006540000
451 Bad eraseblock 885 at 0x000006ea0000
452 Signature matched and data read!
453 load_fact_bbt success 1023
454 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
455 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
456 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 30 00 00
457 00 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 30 00 00
458 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00
459 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
460 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00
461 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
462 Creating 12 MTD partitions on "MT7621-NAND":
463 0x000000000000-0x000007f80000 : "ALL"
464 0x000000000000-0x000000080000 : "boot"
465 0x000000080000-0x0000000c0000 : "u_env"
466 0x0000000c0000-0x000000100000 : "Factory"
467 0x000000100000-0x000000140000 : "s_env"
468 0x000000140000-0x000000180000 : "devinfo"
469 0x000000180000-0x000002980000 : "kernel"
470 0x000000580000-0x000002980000 : "rootfs"
471 0x000002980000-0x000005180000 : "alt_kernel"
472 0x000002d80000-0x000005180000 : "alt_rootfs"
473 0x000005180000-0x000005280000 : "sysdiag"
474 0x000005280000-0x000007f80000 : "syscfg"
475 [mtk_nand] probe successfully!
476 rdm_major = 253
477 GMAC1_MAC_ADRH -- : 0x0000000c
478 GMAC1_MAC_ADRL -- : 0x432880f1
479 Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500!
480 GMAC1_MAC_ADRH -- : 0x0000000c
481 GMAC1_MAC_ADRL -- : 0x432880f0
482 PROC INIT OK!
483 Customize GPIO mode.change I2C & JTAG to GPIO mode.
484 org gpio_mode: 000a05a8
485 update gpio_mode: 000a05ac
486 new gpio_mode: 000a05ac
487 Check Eth LED.
488 PPP generic driver version 2.4.2
489 PPP MPPE Compression module registered
490 NET: Registered protocol family 24
491 PPTP driver version 0.8.5
492 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
493 FM_OUT value: u4FmOut = 0(0x00000000)
494 FM_OUT value: u4FmOut = 0(0x00000000)
495 FM_OUT value: u4FmOut = 0(0x00000000)
496 FM_OUT value: u4FmOut = 0(0x00000000)
497 FM_OUT value: u4FmOut = 0(0x00000000)
498 FM_OUT value: u4FmOut = 0(0x00000000)
499 FM_OUT value: u4FmOut = 0(0x00000000)
500 FM_OUT value: u4FmOut = 0(0x00000000)
501 FM_OUT value: u4FmOut = 0(0x00000000)
502 FM_OUT value: u4FmOut = 0(0x00000000)
503 FM_OUT value: u4FmOut = 0(0x00000000)
504 FM_OUT value: u4FmOut = 0(0x00000000)
505 FM_OUT value: u4FmOut = 0(0x00000000)
506 FM_OUT value: u4FmOut = 0(0x00000000)
507 FM_OUT value: u4FmOut = 0(0x00000000)
508 FM_OUT value: u4FmOut = 0(0x00000000)
509 FM_OUT value: u4FmOut = 0(0x00000000)
510 FM_OUT value: u4FmOut = 0(0x00000000)
511 FM_OUT value: u4FmOut = 0(0x00000000)
512 FM_OUT value: u4FmOut = 0(0x00000000)
513 xhc_mtk xhc_mtk: xHCI Host Controller
514 xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1
515 xhc_mtk xhc_mtk: irq 22, io mem 0x1e1c0000
516 hub 1-0:1.0: USB hub found
517 hub 1-0:1.0: 2 ports detected
518 xhc_mtk xhc_mtk: xHCI Host Controller
519 xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2
520 hub 2-0:1.0: USB hub found
521 hub 2-0:1.0: 1 port detected
522 Initializing USB Mass Storage driver...
523 usbcore: registered new interface driver usb-storage
524 USB Mass Storage support registered.
525 mt_msdc_init: !!!!! SDXC Module Initialize Fail !!!!!
526 u32 classifier
527 Actions configured
528 Netfilter messages via NETLINK v0.30.
529 nf_conntrack version 0.5.0 (3926 buckets, 15704 max)
530 ctnetlink v0.93: registering with nfnetlink.
531 nf_conntrack_rtsp v0.6.21 loading
532 IPVS: Registered protocols ()
533 IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
534 IPVS: ipvs loaded.
535 IPv4 over IPv4 tunneling driver
536 GRE over IPv4 demultiplexor driver
537 gre: can't add protocol
538 nf_nat_rtsp v0.6.21 loading
539 ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux
540 TCP cubic registered
541 NET: Registered protocol family 10
542 ip6_tables: (C) 2000-2006 Netfilter Core Team
543 IPv6 over IPv4 tunneling driver
544 NET: Registered protocol family 17
545 Bridge firewalling registered
546 Ebtables v2.0 registered
547 L2TP core driver, V2.0
548 PPPoL2TP kernel driver, V2.0
549 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
550 All bugs added by David S. Miller <davem@redhat.com>
551 Registering the dns_resolver key type
552 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x0527 instead
553 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x740d instead
554 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0xdf5a instead
555 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000000c: 0x2400 instead
556 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x0080 instead
557 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0x0080 instead
558 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0x881f instead
559 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0x0505 instead
560 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x694c instead
561 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000024: 0x7973 instead
562 Further such events for this erase block will not be printed
563 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x6210 instead
564 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x3271 instead
565 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020008: 0x9ab7 instead
566 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0x23d4 instead
567 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020010: 0xf355 instead
568 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020014: 0x223b instead
569 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0x327e instead
570 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0xd3c5 instead
571 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0x4a17 instead
572 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0xcd6a instead
573 Further such events for this erase block will not be printed
574 Old JFFS2 bitmask found at 0x0003efe8
575 You cannot use older JFFS2 filesystems with newer kernels
576 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x1e9f instead
577 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0x4c7d instead
578 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0x7708 instead
579 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004000c: 0x331d instead
580 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040010: 0x64fd instead
581 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040014: 0x1338 instead
582 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0x116a instead
583 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0xe09b instead
584 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0x8cf3 instead
585 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0xcbdc instead
586 Further such events for this erase block will not be printed
587 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0xb071 instead
588 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0x4e30 instead
589 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0x0de4 instead
590 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006000c: 0x84e9 instead
591 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060010: 0x26b4 instead
592 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060014: 0x0623 instead
593 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0x1130 instead
594 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0xd725 instead
595 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0x82c9 instead
596 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0xddfe instead
597 Further such events for this erase block will not be printed
598 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0xe24b instead
599 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0x055b instead
600 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0x0340 instead
601 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0x79e2 instead
602 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0x23f6 instead
603 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0xafef instead
604 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0xb97e instead
605 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0xb8a6 instead
606 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0x2c40 instead
607 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0xed87 instead
608 Further such events for this erase block will not be printed
609 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0000: 0x5760 instead
610 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0004: 0x4adb instead
611 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0008: 0x5d05 instead
612 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a000c: 0x25ea instead
613 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0010: 0x98b1 instead
614 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0014: 0x1caf instead
615 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0018: 0x071f instead
616 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a001c: 0x3bbc instead
617 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0020: 0x62e0 instead
618 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0024: 0xe18a instead
619 Further such events for this erase block will not be printed
620 Old JFFS2 bitmask found at 0x000a4108
621 You cannot use older JFFS2 filesystems with newer kernels
622 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0000: 0x1a57 instead
623 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0004: 0x29f7 instead
624 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0008: 0x1b85 instead
625 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c000c: 0x41f0 instead
626 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0010: 0xcde5 instead
627 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0014: 0x84b7 instead
628 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0018: 0xcad4 instead
629 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c001c: 0x98a1 instead
630 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0020: 0xdc36 instead
631 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0024: 0x22d4 instead
632 Further such events for this erase block will not be printed
633 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0000: 0xc5ae instead
634 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0004: 0xc23b instead
635 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0008: 0xf17b instead
636 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e000c: 0xe3c4 instead
637 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0010: 0x2697 instead
638 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0014: 0x84b6 instead
639 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0018: 0x8b8f instead
640 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e001c: 0xe870 instead
641 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0020: 0x3f56 instead
642 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0024: 0x6e6b instead
643 Further such events for this erase block will not be printed
644 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100000: 0x4149 instead
645 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100004: 0xe85b instead
646 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100008: 0x094e instead
647 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010000c: 0x7772 instead
648 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100010: 0xd114 instead
649 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100014: 0x34f5 instead
650 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100018: 0x11f9 instead
651 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010001c: 0x3ec2 instead
652 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100020: 0xdb3a instead
653 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100024: 0x32ca instead
654 Further such events for this erase block will not be printed
655 Old JFFS2 bitmask found at 0x001117f4
656 You cannot use older JFFS2 filesystems with newer kernels
657 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120000: 0x8f2e instead
658 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120004: 0x68d9 instead
659 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120008: 0xcdc1 instead
660 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012000c: 0xaf51 instead
661 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120010: 0x2fcb instead
662 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120014: 0xce0d instead
663 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120018: 0x4a65 instead
664 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012001c: 0xe087 instead
665 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120020: 0x0d2c instead
666 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120024: 0xca8e instead
667 Further such events for this erase block will not be printed
668 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140000: 0xb992 instead
669 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140004: 0xd59e instead
670 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140008: 0x92a5 instead
671 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014000c: 0x4983 instead
672 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140010: 0xf0d8 instead
673 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140014: 0x0066 instead
674 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140018: 0xa2a1 instead
675 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014001c: 0x49f8 instead
676 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140020: 0xa8a1 instead
677 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140024: 0x82d5 instead
678 Further such events for this erase block will not be printed
679 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160000: 0xce0b instead
680 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160004: 0x74bb instead
681 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160008: 0x67b6 instead
682 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016000c: 0x6d88 instead
683 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160010: 0x6e4a instead
684 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160014: 0x31cd instead
685 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160018: 0x10f2 instead
686 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016001c: 0x0460 instead
687 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160020: 0x2b19 instead
688 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160024: 0xd636 instead
689 Further such events for this erase block will not be printed
690 Old JFFS2 bitmask found at 0x00172c10
691 You cannot use older JFFS2 filesystems with newer kernels
692 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180000: 0xc161 instead
693 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180004: 0x43e8 instead
694 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180008: 0x71af instead
695 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018000c: 0xddb5 instead
696 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180010: 0xdde3 instead
697 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180014: 0x7a70 instead
698 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180018: 0xd63b instead
699 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018001c: 0xd9b9 instead
700 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180020: 0x7b77 instead
701 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180024: 0x02de instead
702 Further such events for this erase block will not be printed
703 Old JFFS2 bitmask found at 0x001879e8
704 You cannot use older JFFS2 filesystems with newer kernels
705 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0000: 0x4b1d instead
706 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0004: 0x11cf instead
707 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0008: 0x9574 instead
708 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a000c: 0x5785 instead
709 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0010: 0x34d0 instead
710 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0014: 0xc5be instead
711 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0018: 0x1c1b instead
712 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a001c: 0x9f73 instead
713 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0020: 0x0f56 instead
714 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0024: 0x2d01 instead
715 Further such events for this erase block will not be printed
716 Old JFFS2 bitmask found at 0x001a052c
717 You cannot use older JFFS2 filesystems with newer kernels
718 Old JFFS2 bitmask found at 0x001b7b0c
719 You cannot use older JFFS2 filesystems with newer kernels
720 Old JFFS2 bitmask found at 0x001bf9a0
721 You cannot use older JFFS2 filesystems with newer kernels
722 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0000: 0xed44 instead
723 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0004: 0x8ae2 instead
724 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0008: 0xed37 instead
725 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c000c: 0xbb13 instead
726 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0010: 0x33b4 instead
727 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0014: 0x49bc instead
728 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0018: 0x8e77 instead
729 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c001c: 0x7445 instead
730 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0020: 0xb2bd instead
731 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0024: 0x7454 instead
732 Further such events for this erase block will not be printed
733 Old JFFS2 bitmask found at 0x001ca158
734 You cannot use older JFFS2 filesystems with newer kernels
735 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0000: 0xf379 instead
736 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0004: 0x2aa7 instead
737 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0008: 0xacdc instead
738 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e000c: 0x4cc7 instead
739 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0010: 0xd39b instead
740 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0014: 0x876b instead
741 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0018: 0x63a1 instead
742 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e001c: 0x5d67 instead
743 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0020: 0x6a22 instead
744 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0024: 0xeb12 instead
745 Further such events for this erase block will not be printed
746 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200000: 0x4c5c instead
747 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200004: 0xa2e3 instead
748 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200008: 0xaadf instead
749 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020000c: 0x7c35 instead
750 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200010: 0xafab instead
751 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200014: 0xb8df instead
752 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200018: 0xc1fc instead
753 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020001c: 0x9955 instead
754 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200020: 0xfa30 instead
755 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200024: 0x7a3a instead
756 Further such events for this erase block will not be printed
757 Old JFFS2 bitmask found at 0x0021d228
758 You cannot use older JFFS2 filesystems with newer kernels
759 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220000: 0x3636 instead
760 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220004: 0xa16e instead
761 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220008: 0x41ab instead
762 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022000c: 0xf028 instead
763 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220010: 0x90f6 instead
764 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220014: 0xa2c7 instead
765 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220018: 0x93fd instead
766 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022001c: 0x7a95 instead
767 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220020: 0x6b27 instead
768 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220024: 0x7021 instead
769 Further such events for this erase block will not be printed
770 Old JFFS2 bitmask found at 0x0022d858
771 You cannot use older JFFS2 filesystems with newer kernels
772 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240000: 0x4f17 instead
773 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240004: 0xef19 instead
774 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240008: 0x5beb instead
775 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024000c: 0xb789 instead
776 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240010: 0xdfdd instead
777 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240014: 0xab1c instead
778 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240018: 0x83e6 instead
779 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024001c: 0x4a2e instead
780 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240020: 0xe8f5 instead
781 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240024: 0x511d instead
782 Further such events for this erase block will not be printed
783 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080000: 0x4c2e instead
784 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080004: 0x534b instead
785 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080008: 0x302e instead
786 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0208000c: 0x3030 instead
787 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080010: 0x4537 instead
788 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080014: 0x3031 instead
789 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080018: 0x2020 instead
790 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0208001c: 0x2020 instead
791 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080020: 0x3830 instead
792 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080024: 0x3539 instead
793 Further such events for this erase block will not be printed
794 VFS: Mounted root (jffs2 filesystem) readonly on device 31:6.
795 devtmpfs: mounted
796 Freeing unused kernel memory: 228k freed
797 *********************************************************************************
798 _ _ __ _ __ _____ __ __ _____
799 | | | || \ | | / // ____]\ \ / // ____]TM
800 | | | || \ | | / /| (___ \ V /| (____
801 | | | || |\ \| |\ \ \____ \ \ / \____ \
802 | |_____ | || | \ | \ \ ____) | | | ____) |
803 |_______||_||_| \__| \_\[____ / |_| [_____/
804
805 (c) 2013 Belkin International, Inc. and/or its affiliates. All rights reserved.
806 Booting cocoon (firmware version 1.0.1.188217)
807 *********************************************************************************
808 [utopia][init] System Initialization
809 [utopia][init] Creating /proc
810 [utopia][init] Creating /sys
811 [utopia][init] Creating /dev
812 [utopia][init] Creating /tmp
813 [utopia][init] Allocating 40M for /tmp
814 [utopia][init] Prepairing /dev/pts
815 [utopia][init] Setting /tmp and /var permissions
816 [utopia][init] Starting udev..
817 bdutil board utility kernel module, version 1.4
818 bdutil board utility kernel module boardId (0)
819 bdutil board utility LED kernel module, version 1.0
820 Attempting mount of ubifs syscfg partition
821 UBI device number 0, total 358 LEBs (45457408 bytes, 43.4 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
822 [utopia][init] Using persistent syscfg data from /var/config/syscfg
823 [utopia][init] Starting system logging
824 [utopia][init] Starting sysevent subsystem
825 net.netfilter.nf_conntrack_acct = 1
826 [utopia][init] Setting any unset system values to default
827 [utopia][init] no persistence config file (/var/config/pstcfg) found
828 setting up MAC addresses for all interface based on 24:F5:A2:56:40:46
829 Updating NTP Servers if necessary
830 Unit Model (EA8100) matches Firmware image (EA8100)
831 Cannot find device "eth3"
832 restore GSW to dump switch mode
833 REG_ESW_WT_MAC_ATC is 0x7ff0002
834 done.
835 checking for interactive script start up...
836 Updating BootCount Page[35]:11800 ... Done
837
838 [utopia][init] Starting bdutil daemon
839 attempting to sync sysinfo.cgi auth credentials
840 BDUTIL daemon mode (Focus/MTK)
841 Sat Dec 8 15:53:00 UTC 2018
842 restore GSW to dump switch mode
843 REG_ESW_WT_MAC_ATC is 0x7ff0002
844 done.
845
846 (none) login: udhcpc (v1.15.2) started
847 Sending discover...
848 wan, sysevent received: phylink_wan_state
849 Sending discover...
850 Sending discover...
851 wifi, sysevent received: lan-started
852 wifi, service_start()
853 Lighttpd Model Base: EA8100
854 Generating Rainier lighttpd config
855 wifi, wifi_onetime_setting
856 wifi, loading Wi-Fi driver
857 Build temporary www configuration directory:
858 $1$8Frh9urF$TZetgIfYebFxpXFqhJKEr.
859 Registering Service Linksys12182._http._tcp.local port 80
860 file_sharing, smp wifi
861 eth2/eth3 RPS: CPU0/1
862 starting /sbin/nmbd for bridge mode
863 Got a reply for Linksys12182._http._tcp.local.: Name now registered and active
864 Starting smbd ...
865 Multiple power table is not supported on boards that hw_revision=1
866 Channel list is available. Do nothing
867 wifi cache: saving wl0 physical settings
868 wifi cache: saving wl1 physical settings
869 wifi cache: saving wl0 virtual settings
870 wifi cache: saving wl1 virtual settings
871 wifi cache: saving wl0 guest settings
872 wifi cache: saving wl1 guest settings
873 wifi cache: saving wl0 simpletap settings
874 wifi cache: saving wl1 simpletap settings
875 Multi-region is not supported or not enabled
876 Cert region: AH
877 EA8100 product, checking 5G channel list.
878 channel list does not change.
879 killall: iwevent: no process killed
880 Waiting for Wireless Events from interfaces...
881 wifi, Multi-region is not supported or not enabled
882 wifi, Cert region: AH
883 wifi, ETxBfEnCond 0
884 wifi, ETxBfEnCond 1
885 wifi, MU-MIMO enabled
886 wifi, PMF disabled
887 wifi, HT_RDG 1
888 wifi, 256QAM enabled
889 wifi, BGProtection 1
890 wifi, ra0 setting rts thresh
891 wifi, HT_STBC 0
892 wifi, VHT_STBC 0
893 wifi, ra0 htduplicate enabled
894 wifi, ra0 setting framentation thresh
895 wifi, DFS disabled
896 wifi, TxBurst 1
897 wscd: SSDP UDP PORT = 1900
898 wifi, wifi_physical_start(ra0)
899 wifi, wifi_virtual_start(ra0)
900 wifi, wifi_user_start(ra0)
901 Not ready for JNAP. Sleeping for 15 seconds...
902 Sending discover...
903 Sending discover...
904 Sending discover...
905 Restarting nfqrecv service...
906 wifi, ra0 is up
907 nfq_create_queue() failed
908 wifi, wifi_guest_start(ra0)
909 wifi, Do not start guest network in bridge mode
910 wifi, Multi-region is not supported or not enabled
911 wifi, Cert region: AH
912 wifi, ETxBfEnCond 0
913 wifi, ETxBfEnCond 1
914 wifi, MU-MIMO enabled
915 wifi, PMF disabled
916 wifi, HT_RDG 1
917 wifi, 256QAM disabled
918 wifi, rai0 VhtBw=1 (80 MHz)
919 wifi, rai0 setting rts thresh
920 wifi, HT_STBC 1
921 wifi, VHT_STBC 0
922 wifi, rai0 htduplicate enabled
923 wifi, rai0 setting framentation thresh
924 wifi, DFS enabled
925 wscd: SSDP UDP PORT = 1900
926 wifi, TxBurst 1
927 wifi, wifi_physical_start(rai0)
928 wifi, wifi_virtual_start(rai0)
929 wifi, wifi_user_start(rai0)
930 wifi, rai0 is up
931 wifi, wifi_guest_start(rai0)
932 wifi, Do not start guest network in bridge mode
933 route: SIOCADDRT: File exists
934 wifi, restart wscd
935 killall: wscd: no process killed
936 wscd: SSDP UDP PORT = 1900
937 wifi, set wifi hw nat
938 Sending discover...
939 [fw.sh] fwup_checked_after_boot: 0
940 [fwupd] status details:"ERROR: Connecting server"
941 [fw.sh] fwup_forced_update: 0
942 Linksys12182 login: Sending discover...
943 Sending discover...
944 wifi, smp wifi
945 wscd: SSDP UDP PORT = 1900
946 eth2/eth3 RPS: CPU0/2
947 Sending discover...
948 Sending discover...
949 Sending discover...
950
951 Linksys12182 login:
952 Linksys12182 login: Sending discover...
953
954 Linksys12182 login: [fw.sh] fwup_checked_after_boot: 0
955 Sending discover...
956 [fwupd] status details:"ERROR: Connecting server"
957 [fw.sh] fwup_forced_update: 0
958 Sending discover...
959 Sending discover...
960 Sending discover...
961 Sending discover...
962 Sending discover...
963
964 [fw.sh] fwup_checked_after_boot: 0
965 Sending discover...
966 Linksys12182 login: [fwupd] status details:"ERROR: Connecting server"
967 [fw.sh] fwup_forced_update: 0
968 Sending discover...
969 Sending discover...
970 Sending discover...
971 Sending discover...
972
973 Login timed out
974 Linksys12182 login: Sending discover...
975 Sending discover...
976 [fw.sh] fwup_checked_after_boot: 0
977 Sending discover...
978 [fwupd] status details:"ERROR: Connecting server"
979 [fw.sh] fwup_forced_update: 0
980 Sending discover...
981 Sending discover...
982 Sending discover...
983 Sending discover...
984 Sending discover...
985 [fw.sh] fwup_checked_after_boot: 0
986 Sending discover...
987 [fwupd] status details:"ERROR: Connecting server"
988 [fw.sh] fwup_forced_update: 0
989 Sending discover...
990 Sending discover...
991 Sending discover...
992
993 {{/code}}
994
995 If tftp:
996
997 {{code language="plain"}}
998 Please choose the operation:
999 1: Load system code to SDRAM via TFTP.
1000 2: Load system code then write to Flash via TFTP.
1001 3: Boot system code via Flash (default).
1002 4: Entr boot command line interface.
1003 7: Load Boot Loader code then write to Flash via Serial.
1004 9: Load Boot Loader code then write to Flash via TFTP. 4
1005 You choosed 1
1006 0
1007
1008
1009 1: System Load Linux to SDRAM via TFTP.
1010 Please Input new ones /or Ctrl-C to discard
1011 Input device IP (192.168.1.1) ==:192.168.1.1
1012 Input server IP (192.168.1.180) ==:192.168.1.180
1013 Input Linux Kernel filename (atlanta.img) ==:FW_EA8100_1.0.1.188217_prod.img
1014
1015 NetTxPacket = 0x8FFE3200
1016
1017 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
1018
1019 NetLoop,call eth_halt !
1020
1021 NetLoop,call eth_init !
1022 Trying Eth0 (10/100-M)
1023
1024 Waitting for RX_DMA_BUSY status Start... done
1025
1026
1027 ETH_STATE_ACTIVE!!
1028 TFTP from server 192.168.1.180; our IP address is 192.168.1.1
1029 Filename 'FW_EA8100_1.0.1.188217_prod.img'.
1030
1031 TIMEOUT_COUNT=10,Load address: 0x80a00000
1032 Loading: T T T T T T T T T T
1033 Retry count exceeded; starting again
1034
1035 ArpTimeoutCheck
1036 {{/code}}
1037
1038 file FW_EA8100_1.0.1.188217_prod.img loadable via tftp:
1039
1040 {{code language="plain"}}
1041 FW_EA8100_1.0.1.188217_prod.img: u-boot legacy uImage, Linksys EA8100 Router, Linux/MIPS, OS Kernel Image (lzma), 2365554 bytes, Tue Apr 24 13:24:45 2018, Load Address: 0x80001000, Entry Point: 0x8000D1D0, Header CRC: 0x0D741713, Data CRC: 0x1F88C713
1042 {{/code}}
1043
1044 Openwrt [[here>>doc:Linksys EA8100.Openwrt for Linksys EA8100.WebHome]].