Wiki source code of Linksys EA8100

Version 2.1 by Leon Poon on 2019/02/16 06:04
Show last authors
1 [[url:https://www.linksys.com/sg/p/P-EA8100/]]
2
3 Linksys EA8100 Max-Stream™ AC2600 MU-MIMO Gigabit WiFi Router
4
5 Dev wiki: [[url:https://wikidevi.com/wiki/Linksys_EA8100]]
6
7 UART: 3.3v 115200.
8
9 {{code language="plain"}}
10 ===================================================================
11 MT7621 stage1 code 10:33:11 (ASIC)
12 CPU=50000000 HZ BUS=16666666 HZ
13 ==================================================================
14 Change MPLL source from XTAL to CR...
15 do MEMPLL setting..
16 MEMPLL Config : 0x11100000
17 3PLL mode + External loopback
18 === XTAL-40Mhz === DDR-1200Mhz ===
19 PLL2 FB_DL: 0xe, 1/0 = 621/403 39000000
20 PLL3 FB_DL: 0x10, 1/0 = 646/378 41000000
21 PLL4 FB_DL: 0x1a, 1/0 = 533/491 69000000
22 do DDR setting..[00320381]
23 Apply DDR3 Setting...(use customer AC)
24 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
25 --------------------------------------------------------------------------------
26 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
27 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
28 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
29 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
30 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
32 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
33 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
34 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
35 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
36 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
37 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
38 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
39 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
40 000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
41 000F:| 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0
42 0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
43 0011:| 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
44 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
45 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
46 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
47 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
48 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
49 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
50 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
51 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
52 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
53 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
54 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
55 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
56 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
57 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
58 rank 0 coarse = 15
59 rank 0 fine = 72
60 B:| 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0
61 opt_dle value:10
62 DRAMC_R0DELDLY[018]=00001D1D
63 ==================================================================
64 RX DQS perbit delay software calibration
65 ==================================================================
66 1.0-15 bit dq delay value
67 ==================================================================
68 bit| 0 1 2 3 4 5 6 7 8 9
69 --------------------------------------
70 0 | 12 3 11 5 11 1 12 2 0 8
71 10 | 3 10 6 9 3 8
72 --------------------------------------
73
74 ==================================================================
75 2.dqs window
76 x=pass dqs delay value (min~max)center
77 y=0-7bit DQ of every group
78 input delay:DQS0 =29 DQS1 = 29
79 ==================================================================
80 bit DQS0 bit DQS1
81 0 (1~58)29 8 (1~54)27
82 1 (1~52)26 9 (1~53)27
83 2 (1~56)28 10 (1~52)26
84 3 (1~54)27 11 (1~55)28
85 4 (1~58)29 12 (1~57)29
86 5 (1~51)26 13 (1~55)28
87 6 (1~58)29 14 (1~56)28
88 7 (1~56)28 15 (1~56)28
89 ==================================================================
90 3.dq delay value last
91 ==================================================================
92 bit| 0 1 2 3 4 5 6 7 8 9
93 --------------------------------------
94 0 | 12 6 12 7 11 4 12 3 2 10
95 10 | 6 11 6 10 4 9
96 ==================================================================
97 ==================================================================
98 TX perbyte calibration
99 ==================================================================
100 DQS loop = 15, cmp_err_1 = ffff0000
101 dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
102 dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
103 DQ loop=15, cmp_err_1 = ffff01aa
104 DQ loop=14, cmp_err_1 = ffff01aa
105 DQ loop=13, cmp_err_1 = ffff00aa
106 dqs_perbyte_dly.last_dqdly_pass[1]=13, finish count=1
107 DQ loop=12, cmp_err_1 = ffff0000
108 dqs_perbyte_dly.last_dqdly_pass[0]=12, finish count=2
109 byte:0, (DQS,DQ)=(9,8)
110 byte:1, (DQS,DQ)=(9,8)
111 20,data:99
112 [EMI] DRAMC calibration passed
113
114 ===================================================================
115 MT7621 stage1 code done
116 CPU=50000000 HZ BUS=16666666 HZ
117 ===================================================================
118
119
120 U-Boot 1.1.3 (Aug 5 2016 - 15:06:22)
121
122 SERCOMM v1.03.0, Release date: 2016/08/05
123
124 Board: Ralink APSoC DRAM: 256 MB
125 relocate_code Pointer at: 8ffa8000
126
127 Config XHCI 40M PLL
128 Allocate 16 byte aligned buffer: 8ffdf070
129 Enable NFI Clock
130 # MTK NAND # : Use HW ECC
131 NAND ID [C2 F1 80 95 02]
132 Device found in MTK table, ID: c2f1, EXT_ID: 809502
133 Support this Device in MTK table! c2f1
134 select_chip
135 [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
136 Signature matched and data read!
137 load_fact_bbt success 1023
138 load fact bbt success
139 [mtk_nand] probe successfully!
140 mtd->writesize=2048 mtd->oobsize=64, mtd->erasesize=131072 devinfo.iowidth=8
141 ..============================================
142 Ralink UBoot Version: 5.0.0.0
143 --------------------------------------------
144 ASIC MT7621A DualCore (MAC to MT7530 Mode)
145 DRAM_CONF_FROM: Auto-Detection
146 DRAM_TYPE: DDR3
147 DRAM bus: 16 bit
148 Xtal Mode=3 OCP Ratio=1/3
149 Flash component: NAND Flash
150 Date:Aug 5 2016 Time:15:06:22
151 ============================================
152 icache: sets:256, ways:4, linesz:32 ,total:32768
153 dcache: sets:256, ways:4, linesz:32 ,total:32768
154
155 ##### The CPU freq = 880 MHZ ####
156 estimate memory size =256 Mbytes
157 #Reset_MT7530
158 set LAN/WAN WLLLL
159
160 Please choose the operation:
161 1: Load system code to SDRAM via TFTP.
162 2: Load system code then write to Flash via TFTP.
163 3: Boot system code via Flash (default).
164 4: Entr boot command line interface.
165 7: Load Boot Loader code then write to Flash via Serial.
166 9: Load Boot Loader code then write to Flash via TFTP. 0
167
168 #### auto_recovery ####
169
170 check env def auto_recovery no
171 check env def auto_recovery yes
172 check env def boot_part 1
173 check env def boot_part_ready 3
174 enabled:1, boot_part:1, boot_part_ready:3
175 ..nand read ret = 0x20000
176 boot_count:1, next_record:34
177 boot_count:1, next_record:34
178
179 3: System Boot system code via Flash.
180 ## Booting image at bc180000 ...
181 Image Name: Linksys EA8100 Router
182 Image Type: MIPS Linux Kernel Image (lzma compressed)
183 Data Size: 2365554 Bytes = 2.3 MB
184 Load Address: 80001000
185 Entry Point: 8000d1d0
186 ..................................... Verifying Checksum ... OK
187 Uncompressing Kernel Image ... OK
188 No initrd
189 ## Transferring control to Linux (at address 8000d1d0) ...
190 ## Giving linux memsize in MB, 256
191
192 Starting kernel ...
193
194
195 LINUX started...
196
197 THIS IS ASIC
198
199 SDK 5.0.S.0
200 Initializing cgroup subsys cpu
201 Linux version 2.6.36 (root@build-vm) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #81 SMP Tue Apr 24 06:24:25 PDT 2018
202
203 The CPU feqenuce set to 880 MHz
204 GCMP present
205 CPU revision is: 0001992f (MIPS 1004Kc)
206 Software DMA cache coherency
207 Determined physical RAM map:
208 memory: 10000000 @ 00000000 (usable)
209 Zone PFN ranges:
210 DMA 0x00000000 -> 0x0000c000
211 Normal 0x0000c000 -> 0x00010000
212 Movable zone start PFN for each node
213 early_node_map[1] active PFN ranges
214 0: 0x00000000 -> 0x00010000
215 Detected 3 available secondary CPU(s)
216 PERCPU: Embedded 7 pages/cpu @8c204000 s6912 r8192 d13568 u65536
217 pcpu-alloc: s6912 r8192 d13568 u65536 alloc=16*4096
218 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
219 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
220 Kernel command line: console=ttyS1,115200n8 root=/dev/mtdblock6 ro rootfstype=jffs2 init=/sbin/init
221 PID hash table entries: 1024 (order: 0, 4096 bytes)
222 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
223 Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
224 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
225 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
226 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
227 Writing ErrCtl register=0002c400
228 Readback ErrCtl register=0002c400
229 allocated 1310720 bytes of page_cgroup
230 please try 'cgroup_disable=memory' option if you don't want memory cgroups
231 Memory: 251276k/262144k available (5029k kernel code, 10868k reserved, 1589k data, 228k init, 0k highmem)
232 Hierarchical RCU implementation.
233 Verbose stalled-CPUs detection is disabled.
234 NR_IRQS:128
235 Trying to install interrupt handler for IRQ24
236 Trying to install interrupt handler for IRQ25
237 Trying to install interrupt handler for IRQ22
238 Trying to install interrupt handler for IRQ9
239 Trying to install interrupt handler for IRQ10
240 Trying to install interrupt handler for IRQ11
241 Trying to install interrupt handler for IRQ12
242 Trying to install interrupt handler for IRQ13
243 Trying to install interrupt handler for IRQ14
244 Trying to install interrupt handler for IRQ16
245 Trying to install interrupt handler for IRQ17
246 Trying to install interrupt handler for IRQ18
247 Trying to install interrupt handler for IRQ19
248 Trying to install interrupt handler for IRQ20
249 Trying to install interrupt handler for IRQ21
250 Trying to install interrupt handler for IRQ23
251 Trying to install interrupt handler for IRQ26
252 Trying to install interrupt handler for IRQ27
253 Trying to install interrupt handler for IRQ28
254 Trying to install interrupt handler for IRQ15
255 Trying to install interrupt handler for IRQ8
256 Trying to install interrupt handler for IRQ29
257 Trying to install interrupt handler for IRQ30
258 Trying to install interrupt handler for IRQ31
259 console [ttyS1] enabled
260 Calibrating delay loop... 561.15 BogoMIPS (lpj=1122304)
261 pid_max: default: 32768 minimum: 301
262 Mount-cache hash table entries: 512
263 Initializing cgroup subsys memory
264 launch: starting cpu1
265 launch: cpu1 gone!
266 CPU revision is: 0001992f (MIPS 1004Kc)
267 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
268 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
269 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
270 launch: starting cpu2
271 launch: cpu2 gone!
272 CPU revision is: 0001992f (MIPS 1004Kc)
273 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
274 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
275 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
276 launch: starting cpu3
277 launch: cpu3 gone!
278 CPU revision is: 0001992f (MIPS 1004Kc)
279 Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
280 Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
281 MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
282 Brought up 4 CPUs
283 Synchronize counters across 4 CPUs: done.
284 devtmpfs: initialized
285 NET: Registered protocol family 16
286 release PCIe RST: RALINK_RSTCTRL = 7000000
287 PCIE PHY initialize
288 ***** Xtal 40MHz *****
289 start MT7621 PCIe register access
290 RALINK_RSTCTRL = 7000000
291 RALINK_CLKCFG1 = 77ffeff8
292
293 *************** MT7621 PCIe RC mode *************
294 PCIE2 no card, disable it(RST&CLK)
295 pcie_link status = 0x3
296 RALINK_RSTCTRL= 3000000
297 *** Configure Device number setting of Virtual PCI-PCI bridge ***
298 RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
299 PCIE0 enabled
300 PCIE1 enabled
301 interrupt enable status: 300000
302 Port 1 N_FTS = 1b105000
303 Port 0 N_FTS = 1b105000
304 config reg done
305 init_rt2880pci done
306 bio: create slab <bio-0> at 0
307 vgaarb: loaded
308 SCSI subsystem initialized
309 usbcore: registered new interface driver usbfs
310 usbcore: registered new interface driver hub
311 usbcore: registered new device driver usb
312 pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
313 pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
314 pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
315 pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
316 pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
317 pci 0000:00:00.0: BAR 1: set to [mem 0x60200000-0x6020ffff] (PCI address [0x60200000-0x6020ffff]
318 pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
319 pci 0000:00:01.0: BAR 1: set to [mem 0x60210000-0x6021ffff] (PCI address [0x60210000-0x6021ffff]
320 pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
321 pci 0000:01:00.0: BAR 0: set to [mem 0x60000000-0x600fffff 64bit] (PCI address [0x60000000-0x600fffff]
322 pci 0000:00:00.0: PCI bridge to [bus 01-01]
323 pci 0000:00:00.0: bridge window [io disabled]
324 pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
325 pci 0000:00:00.0: bridge window [mem pref disabled]
326 pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
327 pci 0000:02:00.0: BAR 0: set to [mem 0x60100000-0x601fffff 64bit] (PCI address [0x60100000-0x601fffff]
328 pci 0000:00:01.0: PCI bridge to [bus 02-02]
329 pci 0000:00:01.0: bridge window [io disabled]
330 pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
331 pci 0000:00:01.0: bridge window [mem pref disabled]
332 PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
333 PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
334 BAR0 at slot 0 = 0
335 bus=0x0, slot = 0x0
336 res[0]->start = 0
337 res[0]->end = 0
338 res[1]->start = 60200000
339 res[1]->end = 6020ffff
340 res[2]->start = 0
341 res[2]->end = 0
342 res[3]->start = 0
343 res[3]->end = 0
344 res[4]->start = 0
345 res[4]->end = 0
346 res[5]->start = 0
347 res[5]->end = 0
348 BAR0 at slot 1 = 0
349 bus=0x0, slot = 0x1
350 res[0]->start = 0
351 res[0]->end = 0
352 res[1]->start = 60210000
353 res[1]->end = 6021ffff
354 res[2]->start = 0
355 res[2]->end = 0
356 res[3]->start = 0
357 res[3]->end = 0
358 res[4]->start = 0
359 res[4]->end = 0
360 res[5]->start = 0
361 res[5]->end = 0
362 bus=0x1, slot = 0x0, irq=0x4
363 res[0]->start = 60000000
364 res[0]->end = 600fffff
365 res[1]->start = 0
366 res[1]->end = 0
367 res[2]->start = 0
368 res[2]->end = 0
369 res[3]->start = 0
370 res[3]->end = 0
371 res[4]->start = 0
372 res[4]->end = 0
373 res[5]->start = 0
374 res[5]->end = 0
375 bus=0x2, slot = 0x1, irq=0x18
376 res[0]->start = 60100000
377 res[0]->end = 601fffff
378 res[1]->start = 0
379 res[1]->end = 0
380 res[2]->start = 0
381 res[2]->end = 0
382 res[3]->start = 0
383 res[3]->end = 0
384 res[4]->start = 0
385 res[4]->end = 0
386 res[5]->start = 0
387 res[5]->end = 0
388 Switching to clocksource Ralink Systick timer
389 NET: Registered protocol family 2
390 Clockevents: could not switch to one-shot mode:
391 Clockevents: could not switch to one-shot mode:
392 Clockevents: could not switch to one-shot mode:
393 Clockevents: could not switch to one-shot mode: MIPS is not functional.
394 MIPS is not functional.
395 MIPS is not functional.
396 Could not switch to high resolution mode on CPU 2
397 Could not switch to high resolution mode on CPU 1
398 Could not switch to high resolution mode on CPU 0
399 MIPS is not functional.
400 Could not switch to high resolution mode on CPU 3
401 IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
402 TCP established hash table entries: 8192 (order: 4, 65536 bytes)
403 TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
404 TCP: Hash tables configured (established 8192 bind 8192)
405 TCP reno registered
406 UDP hash table entries: 128 (order: 0, 4096 bytes)
407 UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
408 NET: Registered protocol family 1
409 RPC: Registered udp transport module.
410 RPC: Registered tcp transport module.
411 RPC: Registered tcp NFSv4.1 backchannel transport module.
412 4 CPUs re-calibrate udelay(lpj = 1167360)
413 Load Kernel WDG Timer Module
414 squashfs: version 4.0 (2009/01/31) Phillip Lougher
415 JFFS2 version 2.2 (NAND) (ZLIB) (LZO) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
416 fuse init (API version 7.15)
417 msgmni has been set to 490
418 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
419 io scheduler noop registered (default)
420 register power led blinking slow.
421 register wps led off.
422 Ralink gpio driver initialized
423 Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
424 serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
425 serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
426 brd: module loaded
427 loop: module loaded
428 MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
429 Allocate 16 byte aligned buffer: 806e7070
430 Enable NFI Clock
431 # MTK NAND # : Use HW ECC
432 NAND ID [C2 F1 80 95 02, 00809502]
433 Device not found, ID: c2f1
434 Not Support this Device!
435 chip_mode=00000001
436 Support this Device in MTK table! c2f1
437 NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (Unknown NAND 128MiB 3,3V 8-bit)
438 [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
439 Scanning device for bad blocks
440 Bad eraseblock 71 at 0x0000008e0000
441 Bad eraseblock 349 at 0x000002ba0000
442 Bad eraseblock 374 at 0x000002ec0000
443 Bad eraseblock 397 at 0x0000031a0000
444 Bad eraseblock 456 at 0x000003900000
445 Bad eraseblock 502 at 0x000003ec0000
446 Bad eraseblock 540 at 0x000004380000
447 Bad eraseblock 588 at 0x000004980000
448 Bad eraseblock 810 at 0x000006540000
449 Bad eraseblock 885 at 0x000006ea0000
450 Signature matched and data read!
451 load_fact_bbt success 1023
452 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
453 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
454 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 30 00 00
455 00 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 30 00 00
456 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00
457 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
458 00 00 00 00 00 00 00 00 00 00 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0c 00 00
459 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
460 Creating 12 MTD partitions on "MT7621-NAND":
461 0x000000000000-0x000007f80000 : "ALL"
462 0x000000000000-0x000000080000 : "boot"
463 0x000000080000-0x0000000c0000 : "u_env"
464 0x0000000c0000-0x000000100000 : "Factory"
465 0x000000100000-0x000000140000 : "s_env"
466 0x000000140000-0x000000180000 : "devinfo"
467 0x000000180000-0x000002980000 : "kernel"
468 0x000000580000-0x000002980000 : "rootfs"
469 0x000002980000-0x000005180000 : "alt_kernel"
470 0x000002d80000-0x000005180000 : "alt_rootfs"
471 0x000005180000-0x000005280000 : "sysdiag"
472 0x000005280000-0x000007f80000 : "syscfg"
473 [mtk_nand] probe successfully!
474 rdm_major = 253
475 GMAC1_MAC_ADRH -- : 0x0000000c
476 GMAC1_MAC_ADRL -- : 0x432880f1
477 Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500!
478 GMAC1_MAC_ADRH -- : 0x0000000c
479 GMAC1_MAC_ADRL -- : 0x432880f0
480 PROC INIT OK!
481 Customize GPIO mode.change I2C & JTAG to GPIO mode.
482 org gpio_mode: 000a05a8
483 update gpio_mode: 000a05ac
484 new gpio_mode: 000a05ac
485 Check Eth LED.
486 PPP generic driver version 2.4.2
487 PPP MPPE Compression module registered
488 NET: Registered protocol family 24
489 PPTP driver version 0.8.5
490 SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
491 FM_OUT value: u4FmOut = 0(0x00000000)
492 FM_OUT value: u4FmOut = 0(0x00000000)
493 FM_OUT value: u4FmOut = 0(0x00000000)
494 FM_OUT value: u4FmOut = 0(0x00000000)
495 FM_OUT value: u4FmOut = 0(0x00000000)
496 FM_OUT value: u4FmOut = 0(0x00000000)
497 FM_OUT value: u4FmOut = 0(0x00000000)
498 FM_OUT value: u4FmOut = 0(0x00000000)
499 FM_OUT value: u4FmOut = 0(0x00000000)
500 FM_OUT value: u4FmOut = 0(0x00000000)
501 FM_OUT value: u4FmOut = 0(0x00000000)
502 FM_OUT value: u4FmOut = 0(0x00000000)
503 FM_OUT value: u4FmOut = 0(0x00000000)
504 FM_OUT value: u4FmOut = 0(0x00000000)
505 FM_OUT value: u4FmOut = 0(0x00000000)
506 FM_OUT value: u4FmOut = 0(0x00000000)
507 FM_OUT value: u4FmOut = 0(0x00000000)
508 FM_OUT value: u4FmOut = 0(0x00000000)
509 FM_OUT value: u4FmOut = 0(0x00000000)
510 FM_OUT value: u4FmOut = 0(0x00000000)
511 xhc_mtk xhc_mtk: xHCI Host Controller
512 xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1
513 xhc_mtk xhc_mtk: irq 22, io mem 0x1e1c0000
514 hub 1-0:1.0: USB hub found
515 hub 1-0:1.0: 2 ports detected
516 xhc_mtk xhc_mtk: xHCI Host Controller
517 xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2
518 hub 2-0:1.0: USB hub found
519 hub 2-0:1.0: 1 port detected
520 Initializing USB Mass Storage driver...
521 usbcore: registered new interface driver usb-storage
522 USB Mass Storage support registered.
523 mt_msdc_init: !!!!! SDXC Module Initialize Fail !!!!!
524 u32 classifier
525 Actions configured
526 Netfilter messages via NETLINK v0.30.
527 nf_conntrack version 0.5.0 (3926 buckets, 15704 max)
528 ctnetlink v0.93: registering with nfnetlink.
529 nf_conntrack_rtsp v0.6.21 loading
530 IPVS: Registered protocols ()
531 IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
532 IPVS: ipvs loaded.
533 IPv4 over IPv4 tunneling driver
534 GRE over IPv4 demultiplexor driver
535 gre: can't add protocol
536 nf_nat_rtsp v0.6.21 loading
537 ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Linux
538 TCP cubic registered
539 NET: Registered protocol family 10
540 ip6_tables: (C) 2000-2006 Netfilter Core Team
541 IPv6 over IPv4 tunneling driver
542 NET: Registered protocol family 17
543 Bridge firewalling registered
544 Ebtables v2.0 registered
545 L2TP core driver, V2.0
546 PPPoL2TP kernel driver, V2.0
547 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
548 All bugs added by David S. Miller <davem@redhat.com>
549 Registering the dns_resolver key type
550 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000000: 0x0527 instead
551 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000004: 0x740d instead
552 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000008: 0xdf5a instead
553 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000000c: 0x2400 instead
554 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x0080 instead
555 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000014: 0x0080 instead
556 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000018: 0x881f instead
557 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0000001c: 0x0505 instead
558 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000020: 0x694c instead
559 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000024: 0x7973 instead
560 Further such events for this erase block will not be printed
561 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x6210 instead
562 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x3271 instead
563 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020008: 0x9ab7 instead
564 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002000c: 0x23d4 instead
565 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020010: 0xf355 instead
566 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020014: 0x223b instead
567 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0x327e instead
568 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0xd3c5 instead
569 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0x4a17 instead
570 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020024: 0xcd6a instead
571 Further such events for this erase block will not be printed
572 Old JFFS2 bitmask found at 0x0003efe8
573 You cannot use older JFFS2 filesystems with newer kernels
574 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x1e9f instead
575 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0x4c7d instead
576 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0x7708 instead
577 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004000c: 0x331d instead
578 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040010: 0x64fd instead
579 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040014: 0x1338 instead
580 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0x116a instead
581 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0xe09b instead
582 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0x8cf3 instead
583 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0xcbdc instead
584 Further such events for this erase block will not be printed
585 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0xb071 instead
586 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0x4e30 instead
587 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0x0de4 instead
588 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006000c: 0x84e9 instead
589 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060010: 0x26b4 instead
590 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060014: 0x0623 instead
591 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0x1130 instead
592 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0xd725 instead
593 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0x82c9 instead
594 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0xddfe instead
595 Further such events for this erase block will not be printed
596 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0xe24b instead
597 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0x055b instead
598 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0x0340 instead
599 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0x79e2 instead
600 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0x23f6 instead
601 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0xafef instead
602 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0xb97e instead
603 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0xb8a6 instead
604 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0x2c40 instead
605 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0xed87 instead
606 Further such events for this erase block will not be printed
607 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0000: 0x5760 instead
608 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0004: 0x4adb instead
609 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0008: 0x5d05 instead
610 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a000c: 0x25ea instead
611 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0010: 0x98b1 instead
612 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0014: 0x1caf instead
613 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0018: 0x071f instead
614 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a001c: 0x3bbc instead
615 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0020: 0x62e0 instead
616 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0024: 0xe18a instead
617 Further such events for this erase block will not be printed
618 Old JFFS2 bitmask found at 0x000a4108
619 You cannot use older JFFS2 filesystems with newer kernels
620 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0000: 0x1a57 instead
621 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0004: 0x29f7 instead
622 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0008: 0x1b85 instead
623 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c000c: 0x41f0 instead
624 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0010: 0xcde5 instead
625 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0014: 0x84b7 instead
626 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0018: 0xcad4 instead
627 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c001c: 0x98a1 instead
628 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0020: 0xdc36 instead
629 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0024: 0x22d4 instead
630 Further such events for this erase block will not be printed
631 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0000: 0xc5ae instead
632 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0004: 0xc23b instead
633 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0008: 0xf17b instead
634 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e000c: 0xe3c4 instead
635 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0010: 0x2697 instead
636 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0014: 0x84b6 instead
637 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0018: 0x8b8f instead
638 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e001c: 0xe870 instead
639 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0020: 0x3f56 instead
640 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0024: 0x6e6b instead
641 Further such events for this erase block will not be printed
642 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100000: 0x4149 instead
643 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100004: 0xe85b instead
644 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100008: 0x094e instead
645 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010000c: 0x7772 instead
646 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100010: 0xd114 instead
647 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100014: 0x34f5 instead
648 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100018: 0x11f9 instead
649 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010001c: 0x3ec2 instead
650 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100020: 0xdb3a instead
651 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100024: 0x32ca instead
652 Further such events for this erase block will not be printed
653 Old JFFS2 bitmask found at 0x001117f4
654 You cannot use older JFFS2 filesystems with newer kernels
655 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120000: 0x8f2e instead
656 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120004: 0x68d9 instead
657 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120008: 0xcdc1 instead
658 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012000c: 0xaf51 instead
659 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120010: 0x2fcb instead
660 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120014: 0xce0d instead
661 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120018: 0x4a65 instead
662 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012001c: 0xe087 instead
663 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120020: 0x0d2c instead
664 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120024: 0xca8e instead
665 Further such events for this erase block will not be printed
666 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140000: 0xb992 instead
667 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140004: 0xd59e instead
668 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140008: 0x92a5 instead
669 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014000c: 0x4983 instead
670 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140010: 0xf0d8 instead
671 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140014: 0x0066 instead
672 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140018: 0xa2a1 instead
673 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014001c: 0x49f8 instead
674 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140020: 0xa8a1 instead
675 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140024: 0x82d5 instead
676 Further such events for this erase block will not be printed
677 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160000: 0xce0b instead
678 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160004: 0x74bb instead
679 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160008: 0x67b6 instead
680 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016000c: 0x6d88 instead
681 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160010: 0x6e4a instead
682 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160014: 0x31cd instead
683 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160018: 0x10f2 instead
684 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0016001c: 0x0460 instead
685 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160020: 0x2b19 instead
686 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00160024: 0xd636 instead
687 Further such events for this erase block will not be printed
688 Old JFFS2 bitmask found at 0x00172c10
689 You cannot use older JFFS2 filesystems with newer kernels
690 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180000: 0xc161 instead
691 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180004: 0x43e8 instead
692 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180008: 0x71af instead
693 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018000c: 0xddb5 instead
694 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180010: 0xdde3 instead
695 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180014: 0x7a70 instead
696 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180018: 0xd63b instead
697 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0018001c: 0xd9b9 instead
698 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180020: 0x7b77 instead
699 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00180024: 0x02de instead
700 Further such events for this erase block will not be printed
701 Old JFFS2 bitmask found at 0x001879e8
702 You cannot use older JFFS2 filesystems with newer kernels
703 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0000: 0x4b1d instead
704 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0004: 0x11cf instead
705 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0008: 0x9574 instead
706 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a000c: 0x5785 instead
707 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0010: 0x34d0 instead
708 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0014: 0xc5be instead
709 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0018: 0x1c1b instead
710 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a001c: 0x9f73 instead
711 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0020: 0x0f56 instead
712 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001a0024: 0x2d01 instead
713 Further such events for this erase block will not be printed
714 Old JFFS2 bitmask found at 0x001a052c
715 You cannot use older JFFS2 filesystems with newer kernels
716 Old JFFS2 bitmask found at 0x001b7b0c
717 You cannot use older JFFS2 filesystems with newer kernels
718 Old JFFS2 bitmask found at 0x001bf9a0
719 You cannot use older JFFS2 filesystems with newer kernels
720 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0000: 0xed44 instead
721 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0004: 0x8ae2 instead
722 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0008: 0xed37 instead
723 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c000c: 0xbb13 instead
724 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0010: 0x33b4 instead
725 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0014: 0x49bc instead
726 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0018: 0x8e77 instead
727 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c001c: 0x7445 instead
728 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0020: 0xb2bd instead
729 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001c0024: 0x7454 instead
730 Further such events for this erase block will not be printed
731 Old JFFS2 bitmask found at 0x001ca158
732 You cannot use older JFFS2 filesystems with newer kernels
733 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0000: 0xf379 instead
734 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0004: 0x2aa7 instead
735 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0008: 0xacdc instead
736 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e000c: 0x4cc7 instead
737 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0010: 0xd39b instead
738 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0014: 0x876b instead
739 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0018: 0x63a1 instead
740 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e001c: 0x5d67 instead
741 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0020: 0x6a22 instead
742 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x001e0024: 0xeb12 instead
743 Further such events for this erase block will not be printed
744 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200000: 0x4c5c instead
745 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200004: 0xa2e3 instead
746 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200008: 0xaadf instead
747 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020000c: 0x7c35 instead
748 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200010: 0xafab instead
749 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200014: 0xb8df instead
750 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200018: 0xc1fc instead
751 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0020001c: 0x9955 instead
752 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200020: 0xfa30 instead
753 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00200024: 0x7a3a instead
754 Further such events for this erase block will not be printed
755 Old JFFS2 bitmask found at 0x0021d228
756 You cannot use older JFFS2 filesystems with newer kernels
757 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220000: 0x3636 instead
758 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220004: 0xa16e instead
759 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220008: 0x41ab instead
760 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022000c: 0xf028 instead
761 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220010: 0x90f6 instead
762 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220014: 0xa2c7 instead
763 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220018: 0x93fd instead
764 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022001c: 0x7a95 instead
765 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220020: 0x6b27 instead
766 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00220024: 0x7021 instead
767 Further such events for this erase block will not be printed
768 Old JFFS2 bitmask found at 0x0022d858
769 You cannot use older JFFS2 filesystems with newer kernels
770 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240000: 0x4f17 instead
771 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240004: 0xef19 instead
772 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240008: 0x5beb instead
773 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024000c: 0xb789 instead
774 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240010: 0xdfdd instead
775 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240014: 0xab1c instead
776 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240018: 0x83e6 instead
777 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0024001c: 0x4a2e instead
778 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240020: 0xe8f5 instead
779 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00240024: 0x511d instead
780 Further such events for this erase block will not be printed
781 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080000: 0x4c2e instead
782 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080004: 0x534b instead
783 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080008: 0x302e instead
784 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0208000c: 0x3030 instead
785 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080010: 0x4537 instead
786 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080014: 0x3031 instead
787 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080018: 0x2020 instead
788 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0208001c: 0x2020 instead
789 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080020: 0x3830 instead
790 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x02080024: 0x3539 instead
791 Further such events for this erase block will not be printed
792 VFS: Mounted root (jffs2 filesystem) readonly on device 31:6.
793 devtmpfs: mounted
794 Freeing unused kernel memory: 228k freed
795 *********************************************************************************
796 _ _ __ _ __ _____ __ __ _____
797 | | | || \ | | / // ____]\ \ / // ____]TM
798 | | | || \ | | / /| (___ \ V /| (____
799 | | | || |\ \| |\ \ \____ \ \ / \____ \
800 | |_____ | || | \ | \ \ ____) | | | ____) |
801 |_______||_||_| \__| \_\[____ / |_| [_____/
802
803 (c) 2013 Belkin International, Inc. and/or its affiliates. All rights reserved.
804 Booting cocoon (firmware version 1.0.1.188217)
805 *********************************************************************************
806 [utopia][init] System Initialization
807 [utopia][init] Creating /proc
808 [utopia][init] Creating /sys
809 [utopia][init] Creating /dev
810 [utopia][init] Creating /tmp
811 [utopia][init] Allocating 40M for /tmp
812 [utopia][init] Prepairing /dev/pts
813 [utopia][init] Setting /tmp and /var permissions
814 [utopia][init] Starting udev..
815 bdutil board utility kernel module, version 1.4
816 bdutil board utility kernel module boardId (0)
817 bdutil board utility LED kernel module, version 1.0
818 Attempting mount of ubifs syscfg partition
819 UBI device number 0, total 358 LEBs (45457408 bytes, 43.4 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
820 [utopia][init] Using persistent syscfg data from /var/config/syscfg
821 [utopia][init] Starting system logging
822 [utopia][init] Starting sysevent subsystem
823 net.netfilter.nf_conntrack_acct = 1
824 [utopia][init] Setting any unset system values to default
825 [utopia][init] no persistence config file (/var/config/pstcfg) found
826 setting up MAC addresses for all interface based on 24:F5:A2:56:40:46
827 Updating NTP Servers if necessary
828 Unit Model (EA8100) matches Firmware image (EA8100)
829 Cannot find device "eth3"
830 restore GSW to dump switch mode
831 REG_ESW_WT_MAC_ATC is 0x7ff0002
832 done.
833 checking for interactive script start up...
834 Updating BootCount Page[35]:11800 ... Done
835
836 [utopia][init] Starting bdutil daemon
837 attempting to sync sysinfo.cgi auth credentials
838 BDUTIL daemon mode (Focus/MTK)
839 Sat Dec 8 15:53:00 UTC 2018
840 restore GSW to dump switch mode
841 REG_ESW_WT_MAC_ATC is 0x7ff0002
842 done.
843
844 (none) login: udhcpc (v1.15.2) started
845 Sending discover...
846 wan, sysevent received: phylink_wan_state
847 Sending discover...
848 Sending discover...
849 wifi, sysevent received: lan-started
850 wifi, service_start()
851 Lighttpd Model Base: EA8100
852 Generating Rainier lighttpd config
853 wifi, wifi_onetime_setting
854 wifi, loading Wi-Fi driver
855 Build temporary www configuration directory:
856 $1$8Frh9urF$TZetgIfYebFxpXFqhJKEr.
857 Registering Service Linksys12182._http._tcp.local port 80
858 file_sharing, smp wifi
859 eth2/eth3 RPS: CPU0/1
860 starting /sbin/nmbd for bridge mode
861 Got a reply for Linksys12182._http._tcp.local.: Name now registered and active
862 Starting smbd ...
863 Multiple power table is not supported on boards that hw_revision=1
864 Channel list is available. Do nothing
865 wifi cache: saving wl0 physical settings
866 wifi cache: saving wl1 physical settings
867 wifi cache: saving wl0 virtual settings
868 wifi cache: saving wl1 virtual settings
869 wifi cache: saving wl0 guest settings
870 wifi cache: saving wl1 guest settings
871 wifi cache: saving wl0 simpletap settings
872 wifi cache: saving wl1 simpletap settings
873 Multi-region is not supported or not enabled
874 Cert region: AH
875 EA8100 product, checking 5G channel list.
876 channel list does not change.
877 killall: iwevent: no process killed
878 Waiting for Wireless Events from interfaces...
879 wifi, Multi-region is not supported or not enabled
880 wifi, Cert region: AH
881 wifi, ETxBfEnCond 0
882 wifi, ETxBfEnCond 1
883 wifi, MU-MIMO enabled
884 wifi, PMF disabled
885 wifi, HT_RDG 1
886 wifi, 256QAM enabled
887 wifi, BGProtection 1
888 wifi, ra0 setting rts thresh
889 wifi, HT_STBC 0
890 wifi, VHT_STBC 0
891 wifi, ra0 htduplicate enabled
892 wifi, ra0 setting framentation thresh
893 wifi, DFS disabled
894 wifi, TxBurst 1
895 wscd: SSDP UDP PORT = 1900
896 wifi, wifi_physical_start(ra0)
897 wifi, wifi_virtual_start(ra0)
898 wifi, wifi_user_start(ra0)
899 Not ready for JNAP. Sleeping for 15 seconds...
900 Sending discover...
901 Sending discover...
902 Sending discover...
903 Restarting nfqrecv service...
904 wifi, ra0 is up
905 nfq_create_queue() failed
906 wifi, wifi_guest_start(ra0)
907 wifi, Do not start guest network in bridge mode
908 wifi, Multi-region is not supported or not enabled
909 wifi, Cert region: AH
910 wifi, ETxBfEnCond 0
911 wifi, ETxBfEnCond 1
912 wifi, MU-MIMO enabled
913 wifi, PMF disabled
914 wifi, HT_RDG 1
915 wifi, 256QAM disabled
916 wifi, rai0 VhtBw=1 (80 MHz)
917 wifi, rai0 setting rts thresh
918 wifi, HT_STBC 1
919 wifi, VHT_STBC 0
920 wifi, rai0 htduplicate enabled
921 wifi, rai0 setting framentation thresh
922 wifi, DFS enabled
923 wscd: SSDP UDP PORT = 1900
924 wifi, TxBurst 1
925 wifi, wifi_physical_start(rai0)
926 wifi, wifi_virtual_start(rai0)
927 wifi, wifi_user_start(rai0)
928 wifi, rai0 is up
929 wifi, wifi_guest_start(rai0)
930 wifi, Do not start guest network in bridge mode
931 route: SIOCADDRT: File exists
932 wifi, restart wscd
933 killall: wscd: no process killed
934 wscd: SSDP UDP PORT = 1900
935 wifi, set wifi hw nat
936 Sending discover...
937 [fw.sh] fwup_checked_after_boot: 0
938 [fwupd] status details:"ERROR: Connecting server"
939 [fw.sh] fwup_forced_update: 0
940 Linksys12182 login: Sending discover...
941 Sending discover...
942 wifi, smp wifi
943 wscd: SSDP UDP PORT = 1900
944 eth2/eth3 RPS: CPU0/2
945 Sending discover...
946 Sending discover...
947 Sending discover...
948
949 Linksys12182 login:
950 Linksys12182 login: Sending discover...
951
952 Linksys12182 login: [fw.sh] fwup_checked_after_boot: 0
953 Sending discover...
954 [fwupd] status details:"ERROR: Connecting server"
955 [fw.sh] fwup_forced_update: 0
956 Sending discover...
957 Sending discover...
958 Sending discover...
959 Sending discover...
960 Sending discover...
961
962 [fw.sh] fwup_checked_after_boot: 0
963 Sending discover...
964 Linksys12182 login: [fwupd] status details:"ERROR: Connecting server"
965 [fw.sh] fwup_forced_update: 0
966 Sending discover...
967 Sending discover...
968 Sending discover...
969 Sending discover...
970
971 Login timed out
972 Linksys12182 login: Sending discover...
973 Sending discover...
974 [fw.sh] fwup_checked_after_boot: 0
975 Sending discover...
976 [fwupd] status details:"ERROR: Connecting server"
977 [fw.sh] fwup_forced_update: 0
978 Sending discover...
979 Sending discover...
980 Sending discover...
981 Sending discover...
982 Sending discover...
983 [fw.sh] fwup_checked_after_boot: 0
984 Sending discover...
985 [fwupd] status details:"ERROR: Connecting server"
986 [fw.sh] fwup_forced_update: 0
987 Sending discover...
988 Sending discover...
989 Sending discover...
990
991 {{/code}}
992
993 If tftp:
994
995 {{code language="plain"}}
996 Please choose the operation:
997 1: Load system code to SDRAM via TFTP.
998 2: Load system code then write to Flash via TFTP.
999 3: Boot system code via Flash (default).
1000 4: Entr boot command line interface.
1001 7: Load Boot Loader code then write to Flash via Serial.
1002 9: Load Boot Loader code then write to Flash via TFTP. 4
1003 You choosed 1
1004 0
1005
1006
1007 1: System Load Linux to SDRAM via TFTP.
1008 Please Input new ones /or Ctrl-C to discard
1009 Input device IP (192.168.1.1) ==:192.168.1.1
1010 Input server IP (192.168.1.180) ==:192.168.1.180
1011 Input Linux Kernel filename (atlanta.img) ==:FW_EA8100_1.0.1.188217_prod.img
1012
1013 NetTxPacket = 0x8FFE3200
1014
1015 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
1016
1017 NetLoop,call eth_halt !
1018
1019 NetLoop,call eth_init !
1020 Trying Eth0 (10/100-M)
1021
1022 Waitting for RX_DMA_BUSY status Start... done
1023
1024
1025 ETH_STATE_ACTIVE!!
1026 TFTP from server 192.168.1.180; our IP address is 192.168.1.1
1027 Filename 'FW_EA8100_1.0.1.188217_prod.img'.
1028
1029 TIMEOUT_COUNT=10,Load address: 0x80a00000
1030 Loading: T T T T T T T T T T
1031 Retry count exceeded; starting again
1032
1033 ArpTimeoutCheck
1034 {{/code}}
1035
1036 file FW_EA8100_1.0.1.188217_prod.img loadable via tftp:
1037
1038 {{code language="plain"}}
1039 FW_EA8100_1.0.1.188217_prod.img: u-boot legacy uImage, Linksys EA8100 Router, Linux/MIPS, OS Kernel Image (lzma), 2365554 bytes, Tue Apr 24 13:24:45 2018, Load Address: 0x80001000, Entry Point: 0x8000D1D0, Header CRC: 0x0D741713, Data CRC: 0x1F88C713
1040 {{/code}}