Wiki source code of Openwrt for Linksys EA8100

Version 43.1 by Leon Poon on 2021/04/12 12:12
Hide last authors
Leon Poon 1.1 1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
Leon Poon 17.1 3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
Leon Poon 1.1 4
Leon Poon 2.1 5
Leon Poon 13.1 6 = 19.07.x =
7
Leon Poon 43.1 8 Openwrt 19.07.7 for EA8100 is here!
Leon Poon 13.1 9
Leon Poon 43.1 10 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
Leon Poon 28.1 11
Leon Poon 32.1 12 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
13 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
14
Leon Poon 43.1 15 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi! Follow these instructions:
Leon Poon 32.1 16
Leon Poon 43.1 17 1. Grab initramfs-factory.img from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]] and flash it via Linksys UI.
Leon Poon 40.1 18 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. Do NOT configure yet! It's not ready.
Leon Poon 43.1 19 1. Then grab squashfs-sysupgrade.bin from [[https:~~/~~/www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin]] and flash it via LuCi
Leon Poon 40.1 20 1. Wait for it to reboot. Now you can configure!
Leon Poon 13.1 21
Leon Poon 42.1 22 For kernel modules, replace with this in your opkg distfeeds.conf:
23
24 {{code language="none"}}
Leon Poon 43.1 25 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
Leon Poon 42.1 26 {{/code}}
27
Leon Poon 29.1 28 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
Leon Poon 15.1 29
Leon Poon 41.1 30 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
Leon Poon 13.1 31
Leon Poon 41.1 32 {{warning}}
33 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
34 {{/warning}}
35
Leon Poon 40.1 36 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
37
38 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
39
40 --How to flash if your router currently has stock Linksys firmware:--
41
42 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
43 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
44 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
45 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
46 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
47 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
48 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
49 1. --Run: ##opkg update##--
50 1. --Run: ##**opkg install luci**##--
51 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
52
Leon Poon 13.1 53 = 18.x =
54
Leon Poon 11.1 55 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
Leon Poon 2.1 56
Leon Poon 11.1 57 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
58 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
Leon Poon 6.1 59
Leon Poon 11.1 60 Note that sysupgrade to a newer image is not likely to work.
61
Leon Poon 12.1 62 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
Leon Poon 11.1 63 |[[image:1567332570723-651.png]]
64
Leon Poon 6.1 65 Dmesg:
66
67 {{code language="plain"}}
Leon Poon 11.1 68 3: Boot system code via Flash (default).
69 4: Entr boot command line interface.
70 7: Load Boot Loader code then write to Flash via Serial.
71 9: Load Boot Loader code then write to Flash via TFTP. 4
72 You choosed 2
73 0
Leon Poon 2.1 74
Leon Poon 11.1 75
76 2: System Load Linux Kernel then write to Flash via TFTP.
77 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
78 Please Input new ones /or Ctrl-C to discard
79 Input device IP () ==:
80 Input server IP () ==:
81 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
82 which kernel partition to update (1/2/3=both) (2) ==:3
83
84 NetTxPacket = 0x8FFE3200
85
86 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
87
88 NetLoop,call eth_halt !
89
90 NetLoop,call eth_init !
91 Trying Eth0 (10/100-M)
92
93 Waitting for RX_DMA_BUSY status Start... done
94
95
96 ETH_STATE_ACTIVE!!
97 TFTP from server ; our IP address is
98 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
99
100 TIMEOUT_COUNT=10,Load address: 0x80100000
101 Loading: Got ARP REPLY, set server/gtwy eth addr ()
102 Got it
103 #################################################################
104 #################################################################
105 #################################################################
106 #################################################################
107 #################################################################
108 #################################################################
109 #################################################################
110 #################################################################
111 #################################################################
112 #################################################################
113 #################################################################
114 #################################################################
115 #################################################################
116 #################################################################
117 #################################################################
118 #################################################################
119 #################################################################
120 ################################################
121 done
122 Bytes transferred = 5898496 (5a0100 hex)
123 LoadAddr=80100000 NetBootFileXferSize= 005a0100
124 ranand_erase: start:180000, len:20000
125 ..ranand_erase: start:1a0000, len:20000
126 ..ranand_erase: start:1c0000, len:20000
127 ...
128 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
129 Done!
130 ranand_erase: start:2980000, len:20000
131 ..ranand_erase: start:29a0000, len:20000
132 ..ranand_erase: start:29c0000, len:20000
133 ...
134 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
135 Done!
136 ## Booting image at bc180000 ...
137 Image Name: MIPS OpenWrt Linux-4.14.141
Leon Poon 2.1 138 Image Type: MIPS Linux Kernel Image (lzma compressed)
Leon Poon 11.1 139 Data Size: 2010110 Bytes = 1.9 MB
Leon Poon 2.1 140 Load Address: 80001000
141 Entry Point: 80001000
Leon Poon 11.1 142 ............................... Verifying Checksum ... OK
Leon Poon 2.1 143 Uncompressing Kernel Image ... OK
144 No initrd
Leon Poon 6.1 145 ## Transferring control to Linux (at address 80001000) ...
146 ## Giving linux memsize in MB, 256
Leon Poon 2.1 147
148 Starting kernel ...
149
Leon Poon 11.1 150 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
Leon Poon 2.1 151 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
152 [ 0.000000] bootconsole [early0] enabled
153 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
154 [ 0.000000] MIPS: machine is Linksys EA8100
155 [ 0.000000] Determined physical RAM map:
156 [ 0.000000] memory: 10000000 @ 00000000 (usable)
157 [ 0.000000] Initrd not found or empty - disabling initrd
158 [ 0.000000] VPE topology {2,2} total 4
159 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
160 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
161 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
162 [ 0.000000] Zone ranges:
163 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
164 [ 0.000000] HighMem empty
165 [ 0.000000] Movable zone start for each node
166 [ 0.000000] Early memory node ranges
167 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
168 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Leon Poon 11.1 169 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
170 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
171 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
Leon Poon 2.1 172 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
173 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
174 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
175 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Leon Poon 11.1 176 [ 0.000000] Writing ErrCtl register=0002c420
177 [ 0.000000] Readback ErrCtl register=0002c420
178 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
Leon Poon 2.1 179 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
180 [ 0.000000] Hierarchical RCU implementation.
181 [ 0.000000] NR_IRQS: 256
182 [ 0.000000] CPU Clock: 880MHz
183 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
184 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
185 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Leon Poon 11.1 186 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
187 [ 0.073969] pid_max: default: 32768 minimum: 301
188 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
189 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
190 [ 0.094340] Hierarchical SRCU implementation.
191 [ 0.099495] smp: Bringing up secondary CPUs ...
192 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
193 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
194 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
195 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
196 [ 0.164211] Synchronize counters for CPU 1: done.
197 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
198 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
199 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
200 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
201 [ 0.255179] Synchronize counters for CPU 2: done.
202 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
203 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
204 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
205 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
206 [ 0.340367] Synchronize counters for CPU 3: done.
207 [ 0.370232] smp: Brought up 1 node, 4 CPUs
208 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
209 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
210 [ 0.394408] pinctrl core: initialized pinctrl subsystem
211 [ 0.401009] NET: Registered protocol family 16
212 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
213 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
214 [ 0.725598] ***** Xtal 40MHz *****
215 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
216 [ 0.734049] Port 0 N_FTS = 1b102800
217 [ 0.737517] Port 1 N_FTS = 1b102800
218 [ 0.740963] Port 2 N_FTS = 1b102800
219 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
220 [ 1.900719] -> 21007f2
221 [ 1.903123] PCIE0 enabled
222 [ 1.905712] PCIE1 enabled
223 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
224 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
225 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
226 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
227 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
228 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
229 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
230 [ 1.958178] PCI host bridge to bus 0000:00
231 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
232 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
233 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
234 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
235 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
236 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
237 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
238 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
239 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
240 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
241 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
242 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
243 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
244 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
245 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
246 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
247 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
248 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
249 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
250 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
251 [ 2.100582] clocksource: Switched to clocksource GIC
252 [ 2.107275] NET: Registered protocol family 2
253 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
254 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
255 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
256 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
257 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
258 [ 2.144212] NET: Registered protocol family 1
259 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
260 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
261 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
262 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
263 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
264 [ 2.425815] random: fast init done
265 [ 2.430745] io scheduler noop registered
266 [ 2.434579] io scheduler deadline registered (default)
267 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
268 [ 2.448257] console [ttyS0] disabled
269 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
270 [ 2.460836] console [ttyS0] enabled
271 [ 2.460836] console [ttyS0] enabled
272 [ 2.467691] bootconsole [early0] disabled
273 [ 2.467691] bootconsole [early0] disabled
274 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
275 [ 2.484816] Enable NFI Clock
276 [ 2.487689] # MTK NAND # : Use HW ECC
277 [ 2.491382] Device not found, ID: c2f1
278 [ 2.495110] Not Support this Device!
279 [ 2.498835] chip_mode=00000001
280 [ 2.501893] Support this Device in MTK table! c2f1
281 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
282 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
283 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
284 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
285 [ 2.531927] Scanning device for bad blocks
286 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
287 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
288 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
289 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
290 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
291 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
292 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
293 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
294 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
295 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
296 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
297 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
298 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
299 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
300 [ 3.456742] [mtk_nand] probe successfully!
301 [ 3.461570] Signature matched and data read!
302 [ 3.465818] load_fact_bbt success 1023
303 [ 3.470276] libphy: Fixed MDIO Bus: probed
304 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
305 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
306 [ 3.556774] libphy: mdio: probed
307 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
308 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
309 [ 4.978262] NET: Registered protocol family 10
310 [ 4.984286] Segment Routing with IPv6
311 [ 4.988020] NET: Registered protocol family 17
312 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
313 [ 4.999621] UBI: auto-attach mtd9
314 [ 5.003015] ubi0: attaching mtd9
315 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
316 [ 5.039967] ubi0: scanning is finished
317 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
318 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
319 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
320 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
321 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
322 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
323 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
324 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
325 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
326 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
327 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
328 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
329 [ 5.165234] hctosys: unable to open rtc device (rtc0)
330 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
331 [ 5.195491] Freeing unused kernel memory: 1260K
332 [ 5.200022] This architecture does not have kernel memory protection.
333 [ 5.783744] init: Console is alive
334 [ 5.787378] init: - watchdog -
335 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
336 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
337 [ 6.591413] usbcore: registered new interface driver usbfs
338 [ 6.596966] usbcore: registered new interface driver hub
339 [ 6.602453] usbcore: registered new device driver usb
340 [ 6.615285] SCSI subsystem initialized
341 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
342 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
343 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
344 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
345 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
346 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
347 [ 6.676639] hub 1-0:1.0: USB hub found
348 [ 6.680467] hub 1-0:1.0: 2 ports detected
349 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
350 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
351 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
352 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
353 [ 6.713446] hub 2-0:1.0: USB hub found
354 [ 6.717275] hub 2-0:1.0: 1 port detected
355 [ 6.727313] usbcore: registered new interface driver usb-storage
356 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
357 [ 6.750877] init: - preinit -
358 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
359 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
360 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
361 [ 7.225920] scsi host0: usb-storage 2-1:1.0
362 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
Leon Poon 2.1 363 Press the [f] key and hit [enter] to enter failsafe mode
364 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Leon Poon 11.1 365 [ 10.582466] UBIFS (ubi0:1): default file-system created
366 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
367 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
368 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
369 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
370 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
371 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
372 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
373 [ 10.756981] mount_root: switching to ubifs overlay
374 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
375 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
376 [ 10.876085] procd: - early -
377 [ 10.879061] procd: - watchdog -
378 [ 11.550737] procd: - watchdog -
379 [ 11.554202] procd: - ubus -
380 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
381 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
382 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
383 [ 11.625387] procd: - init -
Leon Poon 2.1 384 Please press Enter to activate this console.
Leon Poon 11.1 385 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
386 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
387 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
388 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
389 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
390 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
391 [ 12.127574] urngd: v1.0.0 started.
392 [ 12.145053] xt_time: kernel timezone is -0000
393 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
394 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
395 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
396 [ 12.241178]
397 [ 12.266469] random: crng init done
398 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
399 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
400 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
401 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
402 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
403 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
404 [ 20.161193]
405 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
406 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
407 [ 27.852570] PPP generic driver version 2.4.2
408 [ 27.858358] NET: Registered protocol family 24
409 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
410 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
411 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
412 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
413 [ 41.299522] device eth0.2 entered promiscuous mode
414 [ 41.304484] device eth0 entered promiscuous mode
415 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
416 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
417 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
418 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Leon Poon 2.1 419
420
421
Leon Poon 11.1 422 BusyBox v1.31.0 () built-in shell (ash)
423
Leon Poon 6.1 424 _______ ________ __
425 | |.-----.-----.-----.| | | |.----.| |_
426 | - || _ | -__| || | | || _|| _|
427 |_______|| __|_____|__|__||________||__| |____|
428 |__| W I R E L E S S F R E E D O M
429 -----------------------------------------------------
Leon Poon 11.1 430 OpenWrt SNAPSHOT, r10942-9bebafcb5d
Leon Poon 6.1 431 -----------------------------------------------------
432 === WARNING! =====================================
Leon Poon 2.1 433 There is no root password defined on this device!
434 Use the "passwd" command to set up a new password
435 in order to prevent unauthorized SSH logins.
Leon Poon 6.1 436 --------------------------------------------------
Leon Poon 11.1 437 root@OpenWrt:/# ifconfig -a
438 br-lan Link encap:Ethernet HWaddr
439 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
440 inet6 addr: fde0:62db:5134::1/60 Scope:Global
441 inet6 addr: fe80::/64 Scope:Link
442 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
443 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
444 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
445 collisions:0 txqueuelen:1000
446 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
447
448 eth0 Link encap:Ethernet HWaddr
449 inet6 addr: fe80::/64 Scope:Link
450 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
451 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
452 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
453 collisions:0 txqueuelen:1000
454 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
455 Interrupt:21
456
457 eth0.1 Link encap:Ethernet HWaddr
458 inet6 addr: fe80::/64 Scope:Link
459 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
460 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
461 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
462 collisions:0 txqueuelen:1000
463 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
464
465 eth0.2 Link encap:Ethernet HWaddr
466 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
467 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
468 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
469 collisions:0 txqueuelen:1000
470 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
471
472 lo Link encap:Local Loopback
473 inet addr:127.0.0.1 Mask:255.0.0.0
474 inet6 addr: ::1/128 Scope:Host
475 UP LOOPBACK RUNNING MTU:65536 Metric:1
476 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
477 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
478 collisions:0 txqueuelen:1000
479 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
480
481 wlan0 Link encap:Ethernet HWaddr
482 BROADCAST MULTICAST MTU:1500 Metric:1
483 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
484 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
485 collisions:0 txqueuelen:1000
486 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
487
488 wlan1 Link encap:Ethernet HWaddr
489 BROADCAST MULTICAST MTU:1500 Metric:1
490 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
491 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
492 collisions:0 txqueuelen:1000
493 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
494
495 root@OpenWrt:/# ls -l
496 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
497 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
498 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
499 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
500 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
501 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
502 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
503 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
504 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
505 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
506 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
507 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
508 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
509 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
510 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
511 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
512 root@OpenWrt:/# ps
513 PID USER VSZ STAT COMMAND
514 1 root 1576 S /sbin/procd
515 2 root 0 SW [kthreadd]
516 3 root 0 IW [kworker/0:0]
517 4 root 0 IW< [kworker/0:0H]
518 5 root 0 IW [kworker/u8:0]
519 6 root 0 IW< [mm_percpu_wq]
520 7 root 0 SW [ksoftirqd/0]
521 8 root 0 IW [rcu_sched]
522 9 root 0 IW [rcu_bh]
523 10 root 0 SW [migration/0]
524 11 root 0 SW [cpuhp/0]
525 12 root 0 SW [cpuhp/1]
526 13 root 0 SW [migration/1]
527 14 root 0 SW [ksoftirqd/1]
528 16 root 0 IW< [kworker/1:0H]
529 17 root 0 SW [cpuhp/2]
530 18 root 0 SW [migration/2]
531 19 root 0 SW [ksoftirqd/2]
532 21 root 0 IW< [kworker/2:0H]
533 22 root 0 SW [cpuhp/3]
534 23 root 0 SW [migration/3]
535 24 root 0 SW [ksoftirqd/3]
536 25 root 0 IW [kworker/3:0]
537 26 root 0 IW< [kworker/3:0H]
538 27 root 0 IW< [netns]
539 41 root 0 IW [kworker/u8:3]
540 68 root 0 IW [kworker/3:1]
541 69 root 0 IW [kworker/2:1]
542 138 root 0 IW [kworker/1:1]
543 139 root 0 SW [oom_reaper]
544 140 root 0 IW< [writeback]
545 142 root 0 SW [kcompactd0]
546 143 root 0 IW< [crypto]
547 145 root 0 IW< [kblockd]
548 175 root 0 IW< [watchdogd]
549 199 root 0 SW [kswapd0]
550 268 root 0 IW< [pencrypt]
551 270 root 0 IW< [pdecrypt]
552 366 root 0 IW< [ipv6_addrconf]
553 378 root 0 SW [ubi_bgt0d]
554 383 root 0 IW< [kworker/0:1H]
555 384 root 0 IW< [kworker/2:1H]
556 385 root 0 IW [kworker/2:2]
557 386 root 0 IW< [kworker/3:1H]
558 389 root 0 IW< [kworker/1:1H]
559 429 root 0 IW [kworker/0:2]
560 437 root 0 IW [kworker/1:2]
561 453 root 0 SW [scsi_eh_0]
562 454 root 0 IW< [scsi_tmf_0]
563 455 root 0 SW [usb-storage]
564 496 root 0 SW [ubifs_bgt0_1]
565 573 root 1220 S /sbin/ubusd
566 574 root 1220 S /bin/ash --login
567 591 root 1028 S /sbin/urngd
568 660 root 0 IW< [cfg80211]
569 1012 root 1248 S /sbin/logd -S 64
570 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
571 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
572 1168 root 1700 S /sbin/netifd
573 1204 root 1448 S /usr/sbin/odhcpd
574 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
575 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
576 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
577 1720 root 1212 R ps
578 root@OpenWrt:/etc# ping www.google.co
579 PING www.google.co (): 56 data bytes
580 64 bytes from : seq=0 ttl=52 time=4.718 ms
581 ^C
582 --- www.google.co ping statistics ---
583 1 packets transmitted, 1 packets received, 0% packet loss
584 round-trip min/avg/max = 4.718/4.718/4.718 ms
585 root@OpenWrt:/etc# ping www.google.com
586 PING www.google.com (): 56 data bytes
587 64 bytes from : seq=0 ttl=47 time=4.927 ms
588 64 bytes from : seq=1 ttl=47 time=4.687 ms
589 ^C
590 --- www.google.com ping statistics ---
591 2 packets transmitted, 2 packets received, 0% packet loss
592 round-trip min/avg/max = 4.687/4.807/4.927 ms
593 root@OpenWrt:/etc# opkg update
594 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
595 Updated list of available packages in /var/opkg-lists/openwrt_core
596 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
597 Signature check passed.
598 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
599 Updated list of available packages in /var/opkg-lists/openwrt_base
600 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
601 Signature check passed.
602 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
603 Updated list of available packages in /var/opkg-lists/openwrt_luci
604 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
605 Signature check passed.
606 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
607 Updated list of available packages in /var/opkg-lists/openwrt_packages
608 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
609 Signature check passed.
610 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
611 Updated list of available packages in /var/opkg-lists/openwrt_routing
612 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
613 Signature check passed.
614 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
615 Updated list of available packages in /var/opkg-lists/openwrt_telephony
616 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
617 Signature check passed.
618 root@OpenWrt:/etc# opkg install luci
619 Installing luci (git-19.241.65047-dffe9ca-1) to root...
620 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
621 Installing uhttpd (2019-08-17-6b03f960-3) to root...
622 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
623 Installing liblua5.1.5 (5.1.5-5) to root...
624 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
625 Installing lua (5.1.5-5) to root...
626 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
627 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
628 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
629 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
630 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
631 Installing rpcd (2019-06-05-89bfaa42-3) to root...
632 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
633 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
634 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
635 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
636 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
637 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
638 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
639 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
640 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
641 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
642 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
643 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
644 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
645 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
646 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
647 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
648 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
649 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
650 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
651 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
652 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
653 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
654 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
655 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
656 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
657 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
658 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
659 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
660 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
661 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
662 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
663 Installing rpcd-mod-rrdns (20170710) to root...
664 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
665 Configuring liblucihttp0.
666 Configuring luci-app-opkg.
667 Configuring rpcd.
668 Configuring liblua5.1.5.
669 Configuring luci-lib-ip.
670 Configuring libubus-lua.
671 Configuring libiwinfo-lua.
672 Configuring lua.
673 Configuring luci-lib-nixio.
674 Configuring luci-lib-jsonc.
675 Configuring liblucihttp-lua.
676 Configuring luci-base.
677 Configuring luci-mod-system.
678 Configuring luci-theme-bootstrap.
679 Configuring luci-mod-status.
680 Configuring luci-app-firewall.
681 Configuring luci-proto-ppp.
682 Configuring luci-mod-network.
683 Configuring luci-mod-admin-full.
684 Configuring luci-proto-ipv6.
685 Configuring uhttpd.
686 Configuring rpcd-mod-rrdns.
687 Configuring luci.
688 root@OpenWrt:/etc# df -h
Leon Poon 2.1 689 Filesystem Size Used Available Use% Mounted on
Leon Poon 11.1 690 /dev/root 2.8M 2.8M 0 100% /rom
691 tmpfs 123.5M 764.0K 122.8M 1% /tmp
692 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
693 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
Leon Poon 6.1 694 tmpfs 512.0K 0 512.0K 0% /dev
Leon Poon 11.1 695 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
696 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
697 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
698 [ 2075.984368] device wlan0 entered promiscuous mode
699 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
700 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
701 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
702 [ 2096.494533] device wlan0 left promiscuous mode
703 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
704 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
705 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
706 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
707 [ 2097.404922] device wlan0 entered promiscuous mode
708 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
709 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
710 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
711 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
712 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
713 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
714 [ 2117.964353] device wlan0 left promiscuous mode
715 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
716 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
717 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
718 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
719 [ 2118.804171] device wlan0 entered promiscuous mode
720 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
721 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
722 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
723 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
724 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
725 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
726 [ 2245.748473] device wlan0 left promiscuous mode
727 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
728 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
729 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
730 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
731 [ 2246.557667] device wlan0 entered promiscuous mode
732 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
733 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
734 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
735 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
736 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
737 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
738
739 root@OpenWrt:/etc#
740 root@OpenWrt:/etc# uci show wireless
741 wireless.radio0=wifi-device
742 wireless.radio0.type='mac80211'
743 wireless.radio0.channel='11'
744 wireless.radio0.hwmode='11g'
745 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
746 wireless.radio0.country='00'
747 wireless.radio0.legacy_rates='1'
748 wireless.radio0.htmode='HT20'
749 wireless.default_radio0=wifi-iface
750 wireless.default_radio0.device='radio0'
751 wireless.default_radio0.network='lan'
752 wireless.default_radio0.mode='ap'
753 wireless.default_radio0.encryption='psk2'
754 wireless.default_radio0.key='qwerty1234'
755 wireless.default_radio0.ssid='asdf'
756 wireless.radio1=wifi-device
757 wireless.radio1.type='mac80211'
758 wireless.radio1.channel='36'
759 wireless.radio1.hwmode='11a'
760 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
761 wireless.radio1.htmode='VHT80'
762 wireless.radio1.__toggle='Enable'
763 wireless.radio1.country='00'
764 wireless.radio1.legacy_rates='1'
765 wireless.default_radio1=wifi-iface
766 wireless.default_radio1.device='radio1'
767 wireless.default_radio1.network='lan'
768 wireless.default_radio1.mode='ap'
769 wireless.default_radio1.ssid='asdf'
770 wireless.default_radio1.encryption='psk2'
771 wireless.default_radio1.key='qwerty1234'
772 root@OpenWrt:/etc#
Leon Poon 6.1 773 {{/code}}
Leon Poon 12.1 774
775 Firmware:
776
777 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin