Wiki source code of Openwrt for Linksys EA8100

Version 53.1 by Leon Poon on 2021/06/27 04:45
Hide last authors
Leon Poon 1.1 1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
Leon Poon 17.1 3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
Leon Poon 1.1 4
Leon Poon 52.1 5 = 21.02.x =
Leon Poon 2.1 6
Leon Poon 53.1 7 Thanks to [[this patch>>https://github.com/openwrt/openwrt/commit/97df795b78dc572ea2ec105ccbf8af27cc4b4d8e]], EA8100 is now supported from openwrt 21.02.
Leon Poon 52.1 8
Leon Poon 53.1 9 The 21.02 release is currently at RC3. You can get it from [[openwrt firmware selector>>https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ramips%2Fmt7621&id=linksys_ea8100-v1]] page.
Leon Poon 52.1 10
11 Both 2.4Ghz and 5Ghz wifi are working fine.
12
Leon Poon 13.1 13 = 19.07.x =
14
Leon Poon 43.1 15 Openwrt 19.07.7 for EA8100 is here!
Leon Poon 13.1 16
Leon Poon 43.1 17 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
Leon Poon 28.1 18
Leon Poon 32.1 19 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
20 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
21
Leon Poon 51.1 22 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
Leon Poon 32.1 23
Leon Poon 49.1 24 (% class="box warningmessage" %)
25 (((
Leon Poon 51.1 26 Always use a PC connected to the device via wired ethernet for flashing firmwares.
Leon Poon 49.1 27 )))
28
Leon Poon 51.1 29 Follow these instructions:
30
Leon Poon 46.1 31 1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
32 1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
Leon Poon 47.1 33 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
Leon Poon 45.1 34 1. Flash **##squashfs-sysupgrade.bin##** via LuCi
Leon Poon 40.1 35 1. Wait for it to reboot. Now you can configure!
Leon Poon 13.1 36
Leon Poon 48.1 37 For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
Leon Poon 42.1 38
39 {{code language="none"}}
Leon Poon 43.1 40 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
Leon Poon 42.1 41 {{/code}}
42
Leon Poon 29.1 43 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
Leon Poon 15.1 44
Leon Poon 41.1 45 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
Leon Poon 13.1 46
Leon Poon 41.1 47 {{warning}}
48 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
49 {{/warning}}
50
Leon Poon 40.1 51 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
52
53 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
54
55 --How to flash if your router currently has stock Linksys firmware:--
56
57 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
58 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
59 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
60 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
61 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
62 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
63 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
64 1. --Run: ##opkg update##--
65 1. --Run: ##**opkg install luci**##--
66 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
67
Leon Poon 13.1 68 = 18.x =
69
Leon Poon 11.1 70 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
Leon Poon 2.1 71
Leon Poon 11.1 72 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
73 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
Leon Poon 6.1 74
Leon Poon 11.1 75 Note that sysupgrade to a newer image is not likely to work.
76
Leon Poon 12.1 77 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
Leon Poon 11.1 78 |[[image:1567332570723-651.png]]
79
Leon Poon 6.1 80 Dmesg:
81
82 {{code language="plain"}}
Leon Poon 11.1 83 3: Boot system code via Flash (default).
84 4: Entr boot command line interface.
85 7: Load Boot Loader code then write to Flash via Serial.
86 9: Load Boot Loader code then write to Flash via TFTP. 4
87 You choosed 2
88 0
Leon Poon 2.1 89
Leon Poon 11.1 90
91 2: System Load Linux Kernel then write to Flash via TFTP.
92 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
93 Please Input new ones /or Ctrl-C to discard
94 Input device IP () ==:
95 Input server IP () ==:
96 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
97 which kernel partition to update (1/2/3=both) (2) ==:3
98
99 NetTxPacket = 0x8FFE3200
100
101 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
102
103 NetLoop,call eth_halt !
104
105 NetLoop,call eth_init !
106 Trying Eth0 (10/100-M)
107
108 Waitting for RX_DMA_BUSY status Start... done
109
110
111 ETH_STATE_ACTIVE!!
112 TFTP from server ; our IP address is
113 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
114
115 TIMEOUT_COUNT=10,Load address: 0x80100000
116 Loading: Got ARP REPLY, set server/gtwy eth addr ()
117 Got it
118 #################################################################
119 #################################################################
120 #################################################################
121 #################################################################
122 #################################################################
123 #################################################################
124 #################################################################
125 #################################################################
126 #################################################################
127 #################################################################
128 #################################################################
129 #################################################################
130 #################################################################
131 #################################################################
132 #################################################################
133 #################################################################
134 #################################################################
135 ################################################
136 done
137 Bytes transferred = 5898496 (5a0100 hex)
138 LoadAddr=80100000 NetBootFileXferSize= 005a0100
139 ranand_erase: start:180000, len:20000
140 ..ranand_erase: start:1a0000, len:20000
141 ..ranand_erase: start:1c0000, len:20000
142 ...
143 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
144 Done!
145 ranand_erase: start:2980000, len:20000
146 ..ranand_erase: start:29a0000, len:20000
147 ..ranand_erase: start:29c0000, len:20000
148 ...
149 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
150 Done!
151 ## Booting image at bc180000 ...
152 Image Name: MIPS OpenWrt Linux-4.14.141
Leon Poon 2.1 153 Image Type: MIPS Linux Kernel Image (lzma compressed)
Leon Poon 11.1 154 Data Size: 2010110 Bytes = 1.9 MB
Leon Poon 2.1 155 Load Address: 80001000
156 Entry Point: 80001000
Leon Poon 11.1 157 ............................... Verifying Checksum ... OK
Leon Poon 2.1 158 Uncompressing Kernel Image ... OK
159 No initrd
Leon Poon 6.1 160 ## Transferring control to Linux (at address 80001000) ...
161 ## Giving linux memsize in MB, 256
Leon Poon 2.1 162
163 Starting kernel ...
164
Leon Poon 11.1 165 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
Leon Poon 2.1 166 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
167 [ 0.000000] bootconsole [early0] enabled
168 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
169 [ 0.000000] MIPS: machine is Linksys EA8100
170 [ 0.000000] Determined physical RAM map:
171 [ 0.000000] memory: 10000000 @ 00000000 (usable)
172 [ 0.000000] Initrd not found or empty - disabling initrd
173 [ 0.000000] VPE topology {2,2} total 4
174 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
175 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
176 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
177 [ 0.000000] Zone ranges:
178 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
179 [ 0.000000] HighMem empty
180 [ 0.000000] Movable zone start for each node
181 [ 0.000000] Early memory node ranges
182 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
183 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
Leon Poon 11.1 184 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
185 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
186 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
Leon Poon 2.1 187 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
188 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
189 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
190 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Leon Poon 11.1 191 [ 0.000000] Writing ErrCtl register=0002c420
192 [ 0.000000] Readback ErrCtl register=0002c420
193 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
Leon Poon 2.1 194 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
195 [ 0.000000] Hierarchical RCU implementation.
196 [ 0.000000] NR_IRQS: 256
197 [ 0.000000] CPU Clock: 880MHz
198 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
199 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
200 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
Leon Poon 11.1 201 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
202 [ 0.073969] pid_max: default: 32768 minimum: 301
203 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
204 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
205 [ 0.094340] Hierarchical SRCU implementation.
206 [ 0.099495] smp: Bringing up secondary CPUs ...
207 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
208 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
209 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
210 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
211 [ 0.164211] Synchronize counters for CPU 1: done.
212 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
213 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
214 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
215 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
216 [ 0.255179] Synchronize counters for CPU 2: done.
217 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
218 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
219 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
220 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
221 [ 0.340367] Synchronize counters for CPU 3: done.
222 [ 0.370232] smp: Brought up 1 node, 4 CPUs
223 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
224 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
225 [ 0.394408] pinctrl core: initialized pinctrl subsystem
226 [ 0.401009] NET: Registered protocol family 16
227 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
228 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
229 [ 0.725598] ***** Xtal 40MHz *****
230 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
231 [ 0.734049] Port 0 N_FTS = 1b102800
232 [ 0.737517] Port 1 N_FTS = 1b102800
233 [ 0.740963] Port 2 N_FTS = 1b102800
234 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
235 [ 1.900719] -> 21007f2
236 [ 1.903123] PCIE0 enabled
237 [ 1.905712] PCIE1 enabled
238 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
239 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
240 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
241 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
242 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
243 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
244 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
245 [ 1.958178] PCI host bridge to bus 0000:00
246 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
247 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
248 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
249 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
250 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
251 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
252 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
253 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
254 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
255 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
256 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
257 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
258 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
259 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
260 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
261 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
262 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
263 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
264 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
265 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
266 [ 2.100582] clocksource: Switched to clocksource GIC
267 [ 2.107275] NET: Registered protocol family 2
268 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
269 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
270 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
271 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
272 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
273 [ 2.144212] NET: Registered protocol family 1
274 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
275 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
276 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
277 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
278 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
279 [ 2.425815] random: fast init done
280 [ 2.430745] io scheduler noop registered
281 [ 2.434579] io scheduler deadline registered (default)
282 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
283 [ 2.448257] console [ttyS0] disabled
284 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
285 [ 2.460836] console [ttyS0] enabled
286 [ 2.460836] console [ttyS0] enabled
287 [ 2.467691] bootconsole [early0] disabled
288 [ 2.467691] bootconsole [early0] disabled
289 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
290 [ 2.484816] Enable NFI Clock
291 [ 2.487689] # MTK NAND # : Use HW ECC
292 [ 2.491382] Device not found, ID: c2f1
293 [ 2.495110] Not Support this Device!
294 [ 2.498835] chip_mode=00000001
295 [ 2.501893] Support this Device in MTK table! c2f1
296 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
297 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
298 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
299 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
300 [ 2.531927] Scanning device for bad blocks
301 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
302 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
303 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
304 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
305 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
306 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
307 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
308 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
309 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
310 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
311 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
312 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
313 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
314 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
315 [ 3.456742] [mtk_nand] probe successfully!
316 [ 3.461570] Signature matched and data read!
317 [ 3.465818] load_fact_bbt success 1023
318 [ 3.470276] libphy: Fixed MDIO Bus: probed
319 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
320 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
321 [ 3.556774] libphy: mdio: probed
322 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
323 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
324 [ 4.978262] NET: Registered protocol family 10
325 [ 4.984286] Segment Routing with IPv6
326 [ 4.988020] NET: Registered protocol family 17
327 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
328 [ 4.999621] UBI: auto-attach mtd9
329 [ 5.003015] ubi0: attaching mtd9
330 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
331 [ 5.039967] ubi0: scanning is finished
332 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
333 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
334 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
335 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
336 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
337 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
338 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
339 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
340 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
341 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
342 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
343 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
344 [ 5.165234] hctosys: unable to open rtc device (rtc0)
345 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
346 [ 5.195491] Freeing unused kernel memory: 1260K
347 [ 5.200022] This architecture does not have kernel memory protection.
348 [ 5.783744] init: Console is alive
349 [ 5.787378] init: - watchdog -
350 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
351 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
352 [ 6.591413] usbcore: registered new interface driver usbfs
353 [ 6.596966] usbcore: registered new interface driver hub
354 [ 6.602453] usbcore: registered new device driver usb
355 [ 6.615285] SCSI subsystem initialized
356 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
357 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
358 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
359 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
360 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
361 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
362 [ 6.676639] hub 1-0:1.0: USB hub found
363 [ 6.680467] hub 1-0:1.0: 2 ports detected
364 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
365 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
366 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
367 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
368 [ 6.713446] hub 2-0:1.0: USB hub found
369 [ 6.717275] hub 2-0:1.0: 1 port detected
370 [ 6.727313] usbcore: registered new interface driver usb-storage
371 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
372 [ 6.750877] init: - preinit -
373 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
374 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
375 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
376 [ 7.225920] scsi host0: usb-storage 2-1:1.0
377 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
Leon Poon 2.1 378 Press the [f] key and hit [enter] to enter failsafe mode
379 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Leon Poon 11.1 380 [ 10.582466] UBIFS (ubi0:1): default file-system created
381 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
382 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
383 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
384 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
385 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
386 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
387 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
388 [ 10.756981] mount_root: switching to ubifs overlay
389 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
390 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
391 [ 10.876085] procd: - early -
392 [ 10.879061] procd: - watchdog -
393 [ 11.550737] procd: - watchdog -
394 [ 11.554202] procd: - ubus -
395 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
396 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
397 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
398 [ 11.625387] procd: - init -
Leon Poon 2.1 399 Please press Enter to activate this console.
Leon Poon 11.1 400 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
401 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
402 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
403 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
404 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
405 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
406 [ 12.127574] urngd: v1.0.0 started.
407 [ 12.145053] xt_time: kernel timezone is -0000
408 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
409 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
410 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
411 [ 12.241178]
412 [ 12.266469] random: crng init done
413 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
414 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
415 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
416 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
417 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
418 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
419 [ 20.161193]
420 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
421 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
422 [ 27.852570] PPP generic driver version 2.4.2
423 [ 27.858358] NET: Registered protocol family 24
424 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
425 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
426 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
427 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
428 [ 41.299522] device eth0.2 entered promiscuous mode
429 [ 41.304484] device eth0 entered promiscuous mode
430 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
431 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
432 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
433 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
Leon Poon 2.1 434
435
436
Leon Poon 11.1 437 BusyBox v1.31.0 () built-in shell (ash)
438
Leon Poon 6.1 439 _______ ________ __
440 | |.-----.-----.-----.| | | |.----.| |_
441 | - || _ | -__| || | | || _|| _|
442 |_______|| __|_____|__|__||________||__| |____|
443 |__| W I R E L E S S F R E E D O M
444 -----------------------------------------------------
Leon Poon 11.1 445 OpenWrt SNAPSHOT, r10942-9bebafcb5d
Leon Poon 6.1 446 -----------------------------------------------------
447 === WARNING! =====================================
Leon Poon 2.1 448 There is no root password defined on this device!
449 Use the "passwd" command to set up a new password
450 in order to prevent unauthorized SSH logins.
Leon Poon 6.1 451 --------------------------------------------------
Leon Poon 11.1 452 root@OpenWrt:/# ifconfig -a
453 br-lan Link encap:Ethernet HWaddr
454 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
455 inet6 addr: fde0:62db:5134::1/60 Scope:Global
456 inet6 addr: fe80::/64 Scope:Link
457 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
458 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
459 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
460 collisions:0 txqueuelen:1000
461 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
462
463 eth0 Link encap:Ethernet HWaddr
464 inet6 addr: fe80::/64 Scope:Link
465 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
466 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
467 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
468 collisions:0 txqueuelen:1000
469 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
470 Interrupt:21
471
472 eth0.1 Link encap:Ethernet HWaddr
473 inet6 addr: fe80::/64 Scope:Link
474 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
475 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
476 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
477 collisions:0 txqueuelen:1000
478 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
479
480 eth0.2 Link encap:Ethernet HWaddr
481 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
482 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
483 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
484 collisions:0 txqueuelen:1000
485 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
486
487 lo Link encap:Local Loopback
488 inet addr:127.0.0.1 Mask:255.0.0.0
489 inet6 addr: ::1/128 Scope:Host
490 UP LOOPBACK RUNNING MTU:65536 Metric:1
491 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
492 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
493 collisions:0 txqueuelen:1000
494 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
495
496 wlan0 Link encap:Ethernet HWaddr
497 BROADCAST MULTICAST MTU:1500 Metric:1
498 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
499 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
500 collisions:0 txqueuelen:1000
501 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
502
503 wlan1 Link encap:Ethernet HWaddr
504 BROADCAST MULTICAST MTU:1500 Metric:1
505 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
506 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
507 collisions:0 txqueuelen:1000
508 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
509
510 root@OpenWrt:/# ls -l
511 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
512 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
513 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
514 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
515 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
516 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
517 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
518 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
519 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
520 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
521 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
522 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
523 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
524 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
525 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
526 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
527 root@OpenWrt:/# ps
528 PID USER VSZ STAT COMMAND
529 1 root 1576 S /sbin/procd
530 2 root 0 SW [kthreadd]
531 3 root 0 IW [kworker/0:0]
532 4 root 0 IW< [kworker/0:0H]
533 5 root 0 IW [kworker/u8:0]
534 6 root 0 IW< [mm_percpu_wq]
535 7 root 0 SW [ksoftirqd/0]
536 8 root 0 IW [rcu_sched]
537 9 root 0 IW [rcu_bh]
538 10 root 0 SW [migration/0]
539 11 root 0 SW [cpuhp/0]
540 12 root 0 SW [cpuhp/1]
541 13 root 0 SW [migration/1]
542 14 root 0 SW [ksoftirqd/1]
543 16 root 0 IW< [kworker/1:0H]
544 17 root 0 SW [cpuhp/2]
545 18 root 0 SW [migration/2]
546 19 root 0 SW [ksoftirqd/2]
547 21 root 0 IW< [kworker/2:0H]
548 22 root 0 SW [cpuhp/3]
549 23 root 0 SW [migration/3]
550 24 root 0 SW [ksoftirqd/3]
551 25 root 0 IW [kworker/3:0]
552 26 root 0 IW< [kworker/3:0H]
553 27 root 0 IW< [netns]
554 41 root 0 IW [kworker/u8:3]
555 68 root 0 IW [kworker/3:1]
556 69 root 0 IW [kworker/2:1]
557 138 root 0 IW [kworker/1:1]
558 139 root 0 SW [oom_reaper]
559 140 root 0 IW< [writeback]
560 142 root 0 SW [kcompactd0]
561 143 root 0 IW< [crypto]
562 145 root 0 IW< [kblockd]
563 175 root 0 IW< [watchdogd]
564 199 root 0 SW [kswapd0]
565 268 root 0 IW< [pencrypt]
566 270 root 0 IW< [pdecrypt]
567 366 root 0 IW< [ipv6_addrconf]
568 378 root 0 SW [ubi_bgt0d]
569 383 root 0 IW< [kworker/0:1H]
570 384 root 0 IW< [kworker/2:1H]
571 385 root 0 IW [kworker/2:2]
572 386 root 0 IW< [kworker/3:1H]
573 389 root 0 IW< [kworker/1:1H]
574 429 root 0 IW [kworker/0:2]
575 437 root 0 IW [kworker/1:2]
576 453 root 0 SW [scsi_eh_0]
577 454 root 0 IW< [scsi_tmf_0]
578 455 root 0 SW [usb-storage]
579 496 root 0 SW [ubifs_bgt0_1]
580 573 root 1220 S /sbin/ubusd
581 574 root 1220 S /bin/ash --login
582 591 root 1028 S /sbin/urngd
583 660 root 0 IW< [cfg80211]
584 1012 root 1248 S /sbin/logd -S 64
585 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
586 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
587 1168 root 1700 S /sbin/netifd
588 1204 root 1448 S /usr/sbin/odhcpd
589 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
590 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
591 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
592 1720 root 1212 R ps
593 root@OpenWrt:/etc# ping www.google.co
594 PING www.google.co (): 56 data bytes
595 64 bytes from : seq=0 ttl=52 time=4.718 ms
596 ^C
597 --- www.google.co ping statistics ---
598 1 packets transmitted, 1 packets received, 0% packet loss
599 round-trip min/avg/max = 4.718/4.718/4.718 ms
600 root@OpenWrt:/etc# ping www.google.com
601 PING www.google.com (): 56 data bytes
602 64 bytes from : seq=0 ttl=47 time=4.927 ms
603 64 bytes from : seq=1 ttl=47 time=4.687 ms
604 ^C
605 --- www.google.com ping statistics ---
606 2 packets transmitted, 2 packets received, 0% packet loss
607 round-trip min/avg/max = 4.687/4.807/4.927 ms
608 root@OpenWrt:/etc# opkg update
609 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
610 Updated list of available packages in /var/opkg-lists/openwrt_core
611 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
612 Signature check passed.
613 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
614 Updated list of available packages in /var/opkg-lists/openwrt_base
615 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
616 Signature check passed.
617 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
618 Updated list of available packages in /var/opkg-lists/openwrt_luci
619 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
620 Signature check passed.
621 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
622 Updated list of available packages in /var/opkg-lists/openwrt_packages
623 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
624 Signature check passed.
625 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
626 Updated list of available packages in /var/opkg-lists/openwrt_routing
627 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
628 Signature check passed.
629 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
630 Updated list of available packages in /var/opkg-lists/openwrt_telephony
631 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
632 Signature check passed.
633 root@OpenWrt:/etc# opkg install luci
634 Installing luci (git-19.241.65047-dffe9ca-1) to root...
635 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
636 Installing uhttpd (2019-08-17-6b03f960-3) to root...
637 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
638 Installing liblua5.1.5 (5.1.5-5) to root...
639 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
640 Installing lua (5.1.5-5) to root...
641 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
642 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
643 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
644 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
645 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
646 Installing rpcd (2019-06-05-89bfaa42-3) to root...
647 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
648 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
649 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
650 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
651 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
652 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
653 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
654 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
655 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
656 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
657 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
658 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
659 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
660 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
661 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
662 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
663 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
664 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
665 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
666 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
667 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
668 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
669 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
670 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
671 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
672 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
673 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
674 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
675 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
676 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
677 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
678 Installing rpcd-mod-rrdns (20170710) to root...
679 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
680 Configuring liblucihttp0.
681 Configuring luci-app-opkg.
682 Configuring rpcd.
683 Configuring liblua5.1.5.
684 Configuring luci-lib-ip.
685 Configuring libubus-lua.
686 Configuring libiwinfo-lua.
687 Configuring lua.
688 Configuring luci-lib-nixio.
689 Configuring luci-lib-jsonc.
690 Configuring liblucihttp-lua.
691 Configuring luci-base.
692 Configuring luci-mod-system.
693 Configuring luci-theme-bootstrap.
694 Configuring luci-mod-status.
695 Configuring luci-app-firewall.
696 Configuring luci-proto-ppp.
697 Configuring luci-mod-network.
698 Configuring luci-mod-admin-full.
699 Configuring luci-proto-ipv6.
700 Configuring uhttpd.
701 Configuring rpcd-mod-rrdns.
702 Configuring luci.
703 root@OpenWrt:/etc# df -h
Leon Poon 2.1 704 Filesystem Size Used Available Use% Mounted on
Leon Poon 11.1 705 /dev/root 2.8M 2.8M 0 100% /rom
706 tmpfs 123.5M 764.0K 122.8M 1% /tmp
707 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
708 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
Leon Poon 6.1 709 tmpfs 512.0K 0 512.0K 0% /dev
Leon Poon 11.1 710 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
711 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
712 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
713 [ 2075.984368] device wlan0 entered promiscuous mode
714 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
715 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
716 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
717 [ 2096.494533] device wlan0 left promiscuous mode
718 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
719 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
720 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
721 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
722 [ 2097.404922] device wlan0 entered promiscuous mode
723 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
724 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
725 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
726 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
727 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
728 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
729 [ 2117.964353] device wlan0 left promiscuous mode
730 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
731 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
732 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
733 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
734 [ 2118.804171] device wlan0 entered promiscuous mode
735 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
736 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
737 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
738 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
739 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
740 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
741 [ 2245.748473] device wlan0 left promiscuous mode
742 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
743 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
744 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
745 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
746 [ 2246.557667] device wlan0 entered promiscuous mode
747 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
748 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
749 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
750 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
751 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
752 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
753
754 root@OpenWrt:/etc#
755 root@OpenWrt:/etc# uci show wireless
756 wireless.radio0=wifi-device
757 wireless.radio0.type='mac80211'
758 wireless.radio0.channel='11'
759 wireless.radio0.hwmode='11g'
760 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
761 wireless.radio0.country='00'
762 wireless.radio0.legacy_rates='1'
763 wireless.radio0.htmode='HT20'
764 wireless.default_radio0=wifi-iface
765 wireless.default_radio0.device='radio0'
766 wireless.default_radio0.network='lan'
767 wireless.default_radio0.mode='ap'
768 wireless.default_radio0.encryption='psk2'
769 wireless.default_radio0.key='qwerty1234'
770 wireless.default_radio0.ssid='asdf'
771 wireless.radio1=wifi-device
772 wireless.radio1.type='mac80211'
773 wireless.radio1.channel='36'
774 wireless.radio1.hwmode='11a'
775 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
776 wireless.radio1.htmode='VHT80'
777 wireless.radio1.__toggle='Enable'
778 wireless.radio1.country='00'
779 wireless.radio1.legacy_rates='1'
780 wireless.default_radio1=wifi-iface
781 wireless.default_radio1.device='radio1'
782 wireless.default_radio1.network='lan'
783 wireless.default_radio1.mode='ap'
784 wireless.default_radio1.ssid='asdf'
785 wireless.default_radio1.encryption='psk2'
786 wireless.default_radio1.key='qwerty1234'
787 root@OpenWrt:/etc#
Leon Poon 6.1 788 {{/code}}
Leon Poon 12.1 789
790 Firmware:
791
792 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin