Wiki source code of Openwrt for Linksys EA8100

Version 39.1 by Leon Poon on 2020/09/10 15:17
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5
6 = 19.07.x =
7
8 Openwrt 19.07.4 for EA8100 is here!
9
10 Get images here: [[https:~~/~~/www.codepowered.com/openwrt/v19.07.4/linksys_ea8100/>>https://www.codepowered.com/openwrt/v19.07.4/linksys_ea8100/]] ([[https:~~/~~/github.com/LeonPoon/openwrt/compare/v19.07.4...v19.07.4-linksys_ea8100>>https://github.com/LeonPoon/openwrt/compare/v19.07.4...v19.07.4-linksys_ea8100]])
11
12 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.04:
13
14 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
15 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
16
17 **Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)
18
19 The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.
20
21 How to flash if your router currently has stock Linksys firmware:
22
23 1. Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.
24 1. Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.
25 1. Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots.
26 1. Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).
27 1. Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.
28 1. In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##
29 1. It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.
30 1. Run: ##opkg update##
31 1. Run: ##**opkg install luci**##
32 1. Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.
33
34 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
35
36 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI. **HOWEVER: **upgrading will wipe entire firmware partitions! Backup your files/config before sysupgrade.
37
38 = 18.x =
39
40 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
41
42 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
43 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
44
45 Note that sysupgrade to a newer image is not likely to work.
46
47 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
48 |[[image:1567332570723-651.png]]
49
50 Dmesg:
51
52 {{code language="plain"}}
53 3: Boot system code via Flash (default).
54 4: Entr boot command line interface.
55 7: Load Boot Loader code then write to Flash via Serial.
56 9: Load Boot Loader code then write to Flash via TFTP. 4
57 You choosed 2
58 0
59
60
61 2: System Load Linux Kernel then write to Flash via TFTP.
62 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
63 Please Input new ones /or Ctrl-C to discard
64 Input device IP () ==:
65 Input server IP () ==:
66 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
67 which kernel partition to update (1/2/3=both) (2) ==:3
68
69 NetTxPacket = 0x8FFE3200
70
71 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
72
73 NetLoop,call eth_halt !
74
75 NetLoop,call eth_init !
76 Trying Eth0 (10/100-M)
77
78 Waitting for RX_DMA_BUSY status Start... done
79
80
81 ETH_STATE_ACTIVE!!
82 TFTP from server ; our IP address is
83 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
84
85 TIMEOUT_COUNT=10,Load address: 0x80100000
86 Loading: Got ARP REPLY, set server/gtwy eth addr ()
87 Got it
88 #################################################################
89 #################################################################
90 #################################################################
91 #################################################################
92 #################################################################
93 #################################################################
94 #################################################################
95 #################################################################
96 #################################################################
97 #################################################################
98 #################################################################
99 #################################################################
100 #################################################################
101 #################################################################
102 #################################################################
103 #################################################################
104 #################################################################
105 ################################################
106 done
107 Bytes transferred = 5898496 (5a0100 hex)
108 LoadAddr=80100000 NetBootFileXferSize= 005a0100
109 ranand_erase: start:180000, len:20000
110 ..ranand_erase: start:1a0000, len:20000
111 ..ranand_erase: start:1c0000, len:20000
112 ...
113 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
114 Done!
115 ranand_erase: start:2980000, len:20000
116 ..ranand_erase: start:29a0000, len:20000
117 ..ranand_erase: start:29c0000, len:20000
118 ...
119 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
120 Done!
121 ## Booting image at bc180000 ...
122 Image Name: MIPS OpenWrt Linux-4.14.141
123 Image Type: MIPS Linux Kernel Image (lzma compressed)
124 Data Size: 2010110 Bytes = 1.9 MB
125 Load Address: 80001000
126 Entry Point: 80001000
127 ............................... Verifying Checksum ... OK
128 Uncompressing Kernel Image ... OK
129 No initrd
130 ## Transferring control to Linux (at address 80001000) ...
131 ## Giving linux memsize in MB, 256
132
133 Starting kernel ...
134
135 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
136 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
137 [ 0.000000] bootconsole [early0] enabled
138 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
139 [ 0.000000] MIPS: machine is Linksys EA8100
140 [ 0.000000] Determined physical RAM map:
141 [ 0.000000] memory: 10000000 @ 00000000 (usable)
142 [ 0.000000] Initrd not found or empty - disabling initrd
143 [ 0.000000] VPE topology {2,2} total 4
144 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
145 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
146 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
147 [ 0.000000] Zone ranges:
148 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
149 [ 0.000000] HighMem empty
150 [ 0.000000] Movable zone start for each node
151 [ 0.000000] Early memory node ranges
152 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
153 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
154 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
155 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
156 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
157 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
158 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
159 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
160 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
161 [ 0.000000] Writing ErrCtl register=0002c420
162 [ 0.000000] Readback ErrCtl register=0002c420
163 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
164 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
165 [ 0.000000] Hierarchical RCU implementation.
166 [ 0.000000] NR_IRQS: 256
167 [ 0.000000] CPU Clock: 880MHz
168 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
169 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
170 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
171 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
172 [ 0.073969] pid_max: default: 32768 minimum: 301
173 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
174 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
175 [ 0.094340] Hierarchical SRCU implementation.
176 [ 0.099495] smp: Bringing up secondary CPUs ...
177 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
178 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
179 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
180 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
181 [ 0.164211] Synchronize counters for CPU 1: done.
182 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
183 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
184 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
185 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
186 [ 0.255179] Synchronize counters for CPU 2: done.
187 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
188 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
189 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
190 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
191 [ 0.340367] Synchronize counters for CPU 3: done.
192 [ 0.370232] smp: Brought up 1 node, 4 CPUs
193 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
194 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
195 [ 0.394408] pinctrl core: initialized pinctrl subsystem
196 [ 0.401009] NET: Registered protocol family 16
197 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
198 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
199 [ 0.725598] ***** Xtal 40MHz *****
200 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
201 [ 0.734049] Port 0 N_FTS = 1b102800
202 [ 0.737517] Port 1 N_FTS = 1b102800
203 [ 0.740963] Port 2 N_FTS = 1b102800
204 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
205 [ 1.900719] -> 21007f2
206 [ 1.903123] PCIE0 enabled
207 [ 1.905712] PCIE1 enabled
208 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
209 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
210 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
211 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
212 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
213 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
214 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
215 [ 1.958178] PCI host bridge to bus 0000:00
216 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
217 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
218 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
219 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
220 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
221 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
222 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
223 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
224 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
225 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
226 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
227 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
228 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
229 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
230 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
231 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
232 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
233 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
234 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
235 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
236 [ 2.100582] clocksource: Switched to clocksource GIC
237 [ 2.107275] NET: Registered protocol family 2
238 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
239 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
240 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
241 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
242 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
243 [ 2.144212] NET: Registered protocol family 1
244 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
245 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
246 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
247 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
248 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
249 [ 2.425815] random: fast init done
250 [ 2.430745] io scheduler noop registered
251 [ 2.434579] io scheduler deadline registered (default)
252 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
253 [ 2.448257] console [ttyS0] disabled
254 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
255 [ 2.460836] console [ttyS0] enabled
256 [ 2.460836] console [ttyS0] enabled
257 [ 2.467691] bootconsole [early0] disabled
258 [ 2.467691] bootconsole [early0] disabled
259 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
260 [ 2.484816] Enable NFI Clock
261 [ 2.487689] # MTK NAND # : Use HW ECC
262 [ 2.491382] Device not found, ID: c2f1
263 [ 2.495110] Not Support this Device!
264 [ 2.498835] chip_mode=00000001
265 [ 2.501893] Support this Device in MTK table! c2f1
266 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
267 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
268 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
269 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
270 [ 2.531927] Scanning device for bad blocks
271 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
272 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
273 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
274 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
275 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
276 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
277 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
278 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
279 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
280 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
281 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
282 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
283 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
284 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
285 [ 3.456742] [mtk_nand] probe successfully!
286 [ 3.461570] Signature matched and data read!
287 [ 3.465818] load_fact_bbt success 1023
288 [ 3.470276] libphy: Fixed MDIO Bus: probed
289 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
290 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
291 [ 3.556774] libphy: mdio: probed
292 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
293 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
294 [ 4.978262] NET: Registered protocol family 10
295 [ 4.984286] Segment Routing with IPv6
296 [ 4.988020] NET: Registered protocol family 17
297 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
298 [ 4.999621] UBI: auto-attach mtd9
299 [ 5.003015] ubi0: attaching mtd9
300 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
301 [ 5.039967] ubi0: scanning is finished
302 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
303 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
304 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
305 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
306 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
307 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
308 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
309 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
310 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
311 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
312 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
313 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
314 [ 5.165234] hctosys: unable to open rtc device (rtc0)
315 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
316 [ 5.195491] Freeing unused kernel memory: 1260K
317 [ 5.200022] This architecture does not have kernel memory protection.
318 [ 5.783744] init: Console is alive
319 [ 5.787378] init: - watchdog -
320 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
321 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
322 [ 6.591413] usbcore: registered new interface driver usbfs
323 [ 6.596966] usbcore: registered new interface driver hub
324 [ 6.602453] usbcore: registered new device driver usb
325 [ 6.615285] SCSI subsystem initialized
326 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
327 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
328 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
329 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
330 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
331 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
332 [ 6.676639] hub 1-0:1.0: USB hub found
333 [ 6.680467] hub 1-0:1.0: 2 ports detected
334 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
335 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
336 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
337 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
338 [ 6.713446] hub 2-0:1.0: USB hub found
339 [ 6.717275] hub 2-0:1.0: 1 port detected
340 [ 6.727313] usbcore: registered new interface driver usb-storage
341 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
342 [ 6.750877] init: - preinit -
343 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
344 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
345 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
346 [ 7.225920] scsi host0: usb-storage 2-1:1.0
347 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
348 Press the [f] key and hit [enter] to enter failsafe mode
349 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
350 [ 10.582466] UBIFS (ubi0:1): default file-system created
351 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
352 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
353 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
354 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
355 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
356 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
357 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
358 [ 10.756981] mount_root: switching to ubifs overlay
359 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
360 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
361 [ 10.876085] procd: - early -
362 [ 10.879061] procd: - watchdog -
363 [ 11.550737] procd: - watchdog -
364 [ 11.554202] procd: - ubus -
365 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
366 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
367 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
368 [ 11.625387] procd: - init -
369 Please press Enter to activate this console.
370 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
371 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
372 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
373 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
374 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
375 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
376 [ 12.127574] urngd: v1.0.0 started.
377 [ 12.145053] xt_time: kernel timezone is -0000
378 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
379 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
380 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
381 [ 12.241178]
382 [ 12.266469] random: crng init done
383 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
384 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
385 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
386 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
387 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
388 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
389 [ 20.161193]
390 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
391 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
392 [ 27.852570] PPP generic driver version 2.4.2
393 [ 27.858358] NET: Registered protocol family 24
394 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
395 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
396 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
397 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
398 [ 41.299522] device eth0.2 entered promiscuous mode
399 [ 41.304484] device eth0 entered promiscuous mode
400 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
401 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
402 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
403 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
404
405
406
407 BusyBox v1.31.0 () built-in shell (ash)
408
409 _______ ________ __
410 | |.-----.-----.-----.| | | |.----.| |_
411 | - || _ | -__| || | | || _|| _|
412 |_______|| __|_____|__|__||________||__| |____|
413 |__| W I R E L E S S F R E E D O M
414 -----------------------------------------------------
415 OpenWrt SNAPSHOT, r10942-9bebafcb5d
416 -----------------------------------------------------
417 === WARNING! =====================================
418 There is no root password defined on this device!
419 Use the "passwd" command to set up a new password
420 in order to prevent unauthorized SSH logins.
421 --------------------------------------------------
422 root@OpenWrt:/# ifconfig -a
423 br-lan Link encap:Ethernet HWaddr
424 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
425 inet6 addr: fde0:62db:5134::1/60 Scope:Global
426 inet6 addr: fe80::/64 Scope:Link
427 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
428 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
429 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
430 collisions:0 txqueuelen:1000
431 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
432
433 eth0 Link encap:Ethernet HWaddr
434 inet6 addr: fe80::/64 Scope:Link
435 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
436 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
437 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
438 collisions:0 txqueuelen:1000
439 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
440 Interrupt:21
441
442 eth0.1 Link encap:Ethernet HWaddr
443 inet6 addr: fe80::/64 Scope:Link
444 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
445 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
446 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
447 collisions:0 txqueuelen:1000
448 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
449
450 eth0.2 Link encap:Ethernet HWaddr
451 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
452 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
453 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
454 collisions:0 txqueuelen:1000
455 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
456
457 lo Link encap:Local Loopback
458 inet addr:127.0.0.1 Mask:255.0.0.0
459 inet6 addr: ::1/128 Scope:Host
460 UP LOOPBACK RUNNING MTU:65536 Metric:1
461 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
462 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
463 collisions:0 txqueuelen:1000
464 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
465
466 wlan0 Link encap:Ethernet HWaddr
467 BROADCAST MULTICAST MTU:1500 Metric:1
468 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
469 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
470 collisions:0 txqueuelen:1000
471 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
472
473 wlan1 Link encap:Ethernet HWaddr
474 BROADCAST MULTICAST MTU:1500 Metric:1
475 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
476 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
477 collisions:0 txqueuelen:1000
478 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
479
480 root@OpenWrt:/# ls -l
481 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
482 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
483 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
484 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
485 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
486 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
487 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
488 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
489 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
490 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
491 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
492 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
493 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
494 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
495 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
496 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
497 root@OpenWrt:/# ps
498 PID USER VSZ STAT COMMAND
499 1 root 1576 S /sbin/procd
500 2 root 0 SW [kthreadd]
501 3 root 0 IW [kworker/0:0]
502 4 root 0 IW< [kworker/0:0H]
503 5 root 0 IW [kworker/u8:0]
504 6 root 0 IW< [mm_percpu_wq]
505 7 root 0 SW [ksoftirqd/0]
506 8 root 0 IW [rcu_sched]
507 9 root 0 IW [rcu_bh]
508 10 root 0 SW [migration/0]
509 11 root 0 SW [cpuhp/0]
510 12 root 0 SW [cpuhp/1]
511 13 root 0 SW [migration/1]
512 14 root 0 SW [ksoftirqd/1]
513 16 root 0 IW< [kworker/1:0H]
514 17 root 0 SW [cpuhp/2]
515 18 root 0 SW [migration/2]
516 19 root 0 SW [ksoftirqd/2]
517 21 root 0 IW< [kworker/2:0H]
518 22 root 0 SW [cpuhp/3]
519 23 root 0 SW [migration/3]
520 24 root 0 SW [ksoftirqd/3]
521 25 root 0 IW [kworker/3:0]
522 26 root 0 IW< [kworker/3:0H]
523 27 root 0 IW< [netns]
524 41 root 0 IW [kworker/u8:3]
525 68 root 0 IW [kworker/3:1]
526 69 root 0 IW [kworker/2:1]
527 138 root 0 IW [kworker/1:1]
528 139 root 0 SW [oom_reaper]
529 140 root 0 IW< [writeback]
530 142 root 0 SW [kcompactd0]
531 143 root 0 IW< [crypto]
532 145 root 0 IW< [kblockd]
533 175 root 0 IW< [watchdogd]
534 199 root 0 SW [kswapd0]
535 268 root 0 IW< [pencrypt]
536 270 root 0 IW< [pdecrypt]
537 366 root 0 IW< [ipv6_addrconf]
538 378 root 0 SW [ubi_bgt0d]
539 383 root 0 IW< [kworker/0:1H]
540 384 root 0 IW< [kworker/2:1H]
541 385 root 0 IW [kworker/2:2]
542 386 root 0 IW< [kworker/3:1H]
543 389 root 0 IW< [kworker/1:1H]
544 429 root 0 IW [kworker/0:2]
545 437 root 0 IW [kworker/1:2]
546 453 root 0 SW [scsi_eh_0]
547 454 root 0 IW< [scsi_tmf_0]
548 455 root 0 SW [usb-storage]
549 496 root 0 SW [ubifs_bgt0_1]
550 573 root 1220 S /sbin/ubusd
551 574 root 1220 S /bin/ash --login
552 591 root 1028 S /sbin/urngd
553 660 root 0 IW< [cfg80211]
554 1012 root 1248 S /sbin/logd -S 64
555 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
556 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
557 1168 root 1700 S /sbin/netifd
558 1204 root 1448 S /usr/sbin/odhcpd
559 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
560 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
561 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
562 1720 root 1212 R ps
563 root@OpenWrt:/etc# ping www.google.co
564 PING www.google.co (): 56 data bytes
565 64 bytes from : seq=0 ttl=52 time=4.718 ms
566 ^C
567 --- www.google.co ping statistics ---
568 1 packets transmitted, 1 packets received, 0% packet loss
569 round-trip min/avg/max = 4.718/4.718/4.718 ms
570 root@OpenWrt:/etc# ping www.google.com
571 PING www.google.com (): 56 data bytes
572 64 bytes from : seq=0 ttl=47 time=4.927 ms
573 64 bytes from : seq=1 ttl=47 time=4.687 ms
574 ^C
575 --- www.google.com ping statistics ---
576 2 packets transmitted, 2 packets received, 0% packet loss
577 round-trip min/avg/max = 4.687/4.807/4.927 ms
578 root@OpenWrt:/etc# opkg update
579 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
580 Updated list of available packages in /var/opkg-lists/openwrt_core
581 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
582 Signature check passed.
583 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
584 Updated list of available packages in /var/opkg-lists/openwrt_base
585 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
586 Signature check passed.
587 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
588 Updated list of available packages in /var/opkg-lists/openwrt_luci
589 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
590 Signature check passed.
591 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
592 Updated list of available packages in /var/opkg-lists/openwrt_packages
593 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
594 Signature check passed.
595 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
596 Updated list of available packages in /var/opkg-lists/openwrt_routing
597 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
598 Signature check passed.
599 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
600 Updated list of available packages in /var/opkg-lists/openwrt_telephony
601 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
602 Signature check passed.
603 root@OpenWrt:/etc# opkg install luci
604 Installing luci (git-19.241.65047-dffe9ca-1) to root...
605 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
606 Installing uhttpd (2019-08-17-6b03f960-3) to root...
607 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
608 Installing liblua5.1.5 (5.1.5-5) to root...
609 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
610 Installing lua (5.1.5-5) to root...
611 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
612 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
613 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
614 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
615 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
616 Installing rpcd (2019-06-05-89bfaa42-3) to root...
617 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
618 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
619 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
620 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
621 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
622 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
623 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
624 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
625 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
626 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
627 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
628 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
629 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
630 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
631 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
632 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
633 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
634 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
635 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
636 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
637 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
638 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
639 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
640 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
641 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
642 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
643 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
644 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
645 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
646 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
647 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
648 Installing rpcd-mod-rrdns (20170710) to root...
649 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
650 Configuring liblucihttp0.
651 Configuring luci-app-opkg.
652 Configuring rpcd.
653 Configuring liblua5.1.5.
654 Configuring luci-lib-ip.
655 Configuring libubus-lua.
656 Configuring libiwinfo-lua.
657 Configuring lua.
658 Configuring luci-lib-nixio.
659 Configuring luci-lib-jsonc.
660 Configuring liblucihttp-lua.
661 Configuring luci-base.
662 Configuring luci-mod-system.
663 Configuring luci-theme-bootstrap.
664 Configuring luci-mod-status.
665 Configuring luci-app-firewall.
666 Configuring luci-proto-ppp.
667 Configuring luci-mod-network.
668 Configuring luci-mod-admin-full.
669 Configuring luci-proto-ipv6.
670 Configuring uhttpd.
671 Configuring rpcd-mod-rrdns.
672 Configuring luci.
673 root@OpenWrt:/etc# df -h
674 Filesystem Size Used Available Use% Mounted on
675 /dev/root 2.8M 2.8M 0 100% /rom
676 tmpfs 123.5M 764.0K 122.8M 1% /tmp
677 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
678 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
679 tmpfs 512.0K 0 512.0K 0% /dev
680 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
681 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
682 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
683 [ 2075.984368] device wlan0 entered promiscuous mode
684 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
685 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
686 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
687 [ 2096.494533] device wlan0 left promiscuous mode
688 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
689 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
690 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
691 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
692 [ 2097.404922] device wlan0 entered promiscuous mode
693 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
694 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
695 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
696 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
697 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
698 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
699 [ 2117.964353] device wlan0 left promiscuous mode
700 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
701 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
702 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
703 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
704 [ 2118.804171] device wlan0 entered promiscuous mode
705 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
706 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
707 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
708 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
709 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
710 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
711 [ 2245.748473] device wlan0 left promiscuous mode
712 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
713 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
714 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
715 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
716 [ 2246.557667] device wlan0 entered promiscuous mode
717 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
718 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
719 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
720 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
721 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
722 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
723
724 root@OpenWrt:/etc#
725 root@OpenWrt:/etc# uci show wireless
726 wireless.radio0=wifi-device
727 wireless.radio0.type='mac80211'
728 wireless.radio0.channel='11'
729 wireless.radio0.hwmode='11g'
730 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
731 wireless.radio0.country='00'
732 wireless.radio0.legacy_rates='1'
733 wireless.radio0.htmode='HT20'
734 wireless.default_radio0=wifi-iface
735 wireless.default_radio0.device='radio0'
736 wireless.default_radio0.network='lan'
737 wireless.default_radio0.mode='ap'
738 wireless.default_radio0.encryption='psk2'
739 wireless.default_radio0.key='qwerty1234'
740 wireless.default_radio0.ssid='asdf'
741 wireless.radio1=wifi-device
742 wireless.radio1.type='mac80211'
743 wireless.radio1.channel='36'
744 wireless.radio1.hwmode='11a'
745 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
746 wireless.radio1.htmode='VHT80'
747 wireless.radio1.__toggle='Enable'
748 wireless.radio1.country='00'
749 wireless.radio1.legacy_rates='1'
750 wireless.default_radio1=wifi-iface
751 wireless.default_radio1.device='radio1'
752 wireless.default_radio1.network='lan'
753 wireless.default_radio1.mode='ap'
754 wireless.default_radio1.ssid='asdf'
755 wireless.default_radio1.encryption='psk2'
756 wireless.default_radio1.key='qwerty1234'
757 root@OpenWrt:/etc#
758 {{/code}}
759
760 Firmware:
761
762 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin