Wiki source code of Openwrt for Linksys EA8100

Version 54.1 by Leon Poon on 2021/07/16 10:14
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5 = 21.02.x =
6
7 Thanks to [[this patch>>https://github.com/openwrt/openwrt/commit/97df795b78dc572ea2ec105ccbf8af27cc4b4d8e]], EA8100 is now supported from openwrt 21.02.
8
9 The 21.02 release is currently at RC3. You can get it from [[openwrt firmware selector>>https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ramips%2Fmt7621&id=linksys_ea8100-v1]] page.
10
11 Both 2.4Ghz and 5Ghz wifi are working fine.
12
13 If you are already on 19.07, please do not sysupgrade with 21.02 sysupgrade.bin, because sysupgrade.bin format in 21.02 is not supported by 19.07 sysupgrade utility.
14
15 = 19.07.x =
16
17 Openwrt 19.07.7 for EA8100 is here!
18
19 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
20
21 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
22 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
23
24 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
25
26 (% class="box warningmessage" %)
27 (((
28 Always use a PC connected to the device via wired ethernet for flashing firmwares.
29 )))
30
31 Follow these instructions:
32
33 1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
34 1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
35 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
36 1. Flash **##squashfs-sysupgrade.bin##** via LuCi
37 1. Wait for it to reboot. Now you can configure!
38
39 For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
40
41 {{code language="none"}}
42 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
43 {{/code}}
44
45 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
46
47 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
48
49 {{warning}}
50 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
51 {{/warning}}
52
53 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
54
55 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
56
57 --How to flash if your router currently has stock Linksys firmware:--
58
59 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
60 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
61 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
62 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
63 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
64 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
65 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
66 1. --Run: ##opkg update##--
67 1. --Run: ##**opkg install luci**##--
68 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
69
70 = 18.x =
71
72 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
73
74 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
75 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
76
77 Note that sysupgrade to a newer image is not likely to work.
78
79 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
80 |[[image:1567332570723-651.png]]
81
82 Dmesg:
83
84 {{code language="plain"}}
85 3: Boot system code via Flash (default).
86 4: Entr boot command line interface.
87 7: Load Boot Loader code then write to Flash via Serial.
88 9: Load Boot Loader code then write to Flash via TFTP. 4
89 You choosed 2
90 0
91
92
93 2: System Load Linux Kernel then write to Flash via TFTP.
94 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
95 Please Input new ones /or Ctrl-C to discard
96 Input device IP () ==:
97 Input server IP () ==:
98 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
99 which kernel partition to update (1/2/3=both) (2) ==:3
100
101 NetTxPacket = 0x8FFE3200
102
103 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
104
105 NetLoop,call eth_halt !
106
107 NetLoop,call eth_init !
108 Trying Eth0 (10/100-M)
109
110 Waitting for RX_DMA_BUSY status Start... done
111
112
113 ETH_STATE_ACTIVE!!
114 TFTP from server ; our IP address is
115 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
116
117 TIMEOUT_COUNT=10,Load address: 0x80100000
118 Loading: Got ARP REPLY, set server/gtwy eth addr ()
119 Got it
120 #################################################################
121 #################################################################
122 #################################################################
123 #################################################################
124 #################################################################
125 #################################################################
126 #################################################################
127 #################################################################
128 #################################################################
129 #################################################################
130 #################################################################
131 #################################################################
132 #################################################################
133 #################################################################
134 #################################################################
135 #################################################################
136 #################################################################
137 ################################################
138 done
139 Bytes transferred = 5898496 (5a0100 hex)
140 LoadAddr=80100000 NetBootFileXferSize= 005a0100
141 ranand_erase: start:180000, len:20000
142 ..ranand_erase: start:1a0000, len:20000
143 ..ranand_erase: start:1c0000, len:20000
144 ...
145 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
146 Done!
147 ranand_erase: start:2980000, len:20000
148 ..ranand_erase: start:29a0000, len:20000
149 ..ranand_erase: start:29c0000, len:20000
150 ...
151 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
152 Done!
153 ## Booting image at bc180000 ...
154 Image Name: MIPS OpenWrt Linux-4.14.141
155 Image Type: MIPS Linux Kernel Image (lzma compressed)
156 Data Size: 2010110 Bytes = 1.9 MB
157 Load Address: 80001000
158 Entry Point: 80001000
159 ............................... Verifying Checksum ... OK
160 Uncompressing Kernel Image ... OK
161 No initrd
162 ## Transferring control to Linux (at address 80001000) ...
163 ## Giving linux memsize in MB, 256
164
165 Starting kernel ...
166
167 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
168 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
169 [ 0.000000] bootconsole [early0] enabled
170 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
171 [ 0.000000] MIPS: machine is Linksys EA8100
172 [ 0.000000] Determined physical RAM map:
173 [ 0.000000] memory: 10000000 @ 00000000 (usable)
174 [ 0.000000] Initrd not found or empty - disabling initrd
175 [ 0.000000] VPE topology {2,2} total 4
176 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
177 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
178 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
179 [ 0.000000] Zone ranges:
180 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
181 [ 0.000000] HighMem empty
182 [ 0.000000] Movable zone start for each node
183 [ 0.000000] Early memory node ranges
184 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
185 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
186 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
187 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
188 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
189 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
190 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
191 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
192 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
193 [ 0.000000] Writing ErrCtl register=0002c420
194 [ 0.000000] Readback ErrCtl register=0002c420
195 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
196 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
197 [ 0.000000] Hierarchical RCU implementation.
198 [ 0.000000] NR_IRQS: 256
199 [ 0.000000] CPU Clock: 880MHz
200 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
201 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
202 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
203 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
204 [ 0.073969] pid_max: default: 32768 minimum: 301
205 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
206 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
207 [ 0.094340] Hierarchical SRCU implementation.
208 [ 0.099495] smp: Bringing up secondary CPUs ...
209 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
210 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
211 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
212 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
213 [ 0.164211] Synchronize counters for CPU 1: done.
214 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
215 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
216 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
217 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
218 [ 0.255179] Synchronize counters for CPU 2: done.
219 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
220 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
221 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
222 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
223 [ 0.340367] Synchronize counters for CPU 3: done.
224 [ 0.370232] smp: Brought up 1 node, 4 CPUs
225 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
226 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
227 [ 0.394408] pinctrl core: initialized pinctrl subsystem
228 [ 0.401009] NET: Registered protocol family 16
229 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
230 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
231 [ 0.725598] ***** Xtal 40MHz *****
232 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
233 [ 0.734049] Port 0 N_FTS = 1b102800
234 [ 0.737517] Port 1 N_FTS = 1b102800
235 [ 0.740963] Port 2 N_FTS = 1b102800
236 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
237 [ 1.900719] -> 21007f2
238 [ 1.903123] PCIE0 enabled
239 [ 1.905712] PCIE1 enabled
240 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
241 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
242 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
243 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
244 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
245 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
246 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
247 [ 1.958178] PCI host bridge to bus 0000:00
248 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
249 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
250 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
251 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
252 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
253 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
254 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
255 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
256 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
257 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
258 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
259 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
260 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
261 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
262 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
263 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
264 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
265 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
266 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
267 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
268 [ 2.100582] clocksource: Switched to clocksource GIC
269 [ 2.107275] NET: Registered protocol family 2
270 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
271 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
272 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
273 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
274 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
275 [ 2.144212] NET: Registered protocol family 1
276 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
277 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
278 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
279 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
280 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
281 [ 2.425815] random: fast init done
282 [ 2.430745] io scheduler noop registered
283 [ 2.434579] io scheduler deadline registered (default)
284 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
285 [ 2.448257] console [ttyS0] disabled
286 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
287 [ 2.460836] console [ttyS0] enabled
288 [ 2.460836] console [ttyS0] enabled
289 [ 2.467691] bootconsole [early0] disabled
290 [ 2.467691] bootconsole [early0] disabled
291 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
292 [ 2.484816] Enable NFI Clock
293 [ 2.487689] # MTK NAND # : Use HW ECC
294 [ 2.491382] Device not found, ID: c2f1
295 [ 2.495110] Not Support this Device!
296 [ 2.498835] chip_mode=00000001
297 [ 2.501893] Support this Device in MTK table! c2f1
298 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
299 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
300 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
301 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
302 [ 2.531927] Scanning device for bad blocks
303 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
304 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
305 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
306 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
307 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
308 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
309 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
310 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
311 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
312 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
313 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
314 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
315 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
316 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
317 [ 3.456742] [mtk_nand] probe successfully!
318 [ 3.461570] Signature matched and data read!
319 [ 3.465818] load_fact_bbt success 1023
320 [ 3.470276] libphy: Fixed MDIO Bus: probed
321 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
322 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
323 [ 3.556774] libphy: mdio: probed
324 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
325 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
326 [ 4.978262] NET: Registered protocol family 10
327 [ 4.984286] Segment Routing with IPv6
328 [ 4.988020] NET: Registered protocol family 17
329 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
330 [ 4.999621] UBI: auto-attach mtd9
331 [ 5.003015] ubi0: attaching mtd9
332 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
333 [ 5.039967] ubi0: scanning is finished
334 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
335 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
336 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
337 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
338 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
339 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
340 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
341 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
342 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
343 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
344 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
345 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
346 [ 5.165234] hctosys: unable to open rtc device (rtc0)
347 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
348 [ 5.195491] Freeing unused kernel memory: 1260K
349 [ 5.200022] This architecture does not have kernel memory protection.
350 [ 5.783744] init: Console is alive
351 [ 5.787378] init: - watchdog -
352 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
353 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
354 [ 6.591413] usbcore: registered new interface driver usbfs
355 [ 6.596966] usbcore: registered new interface driver hub
356 [ 6.602453] usbcore: registered new device driver usb
357 [ 6.615285] SCSI subsystem initialized
358 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
359 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
360 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
361 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
362 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
363 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
364 [ 6.676639] hub 1-0:1.0: USB hub found
365 [ 6.680467] hub 1-0:1.0: 2 ports detected
366 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
367 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
368 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
369 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
370 [ 6.713446] hub 2-0:1.0: USB hub found
371 [ 6.717275] hub 2-0:1.0: 1 port detected
372 [ 6.727313] usbcore: registered new interface driver usb-storage
373 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
374 [ 6.750877] init: - preinit -
375 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
376 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
377 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
378 [ 7.225920] scsi host0: usb-storage 2-1:1.0
379 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
380 Press the [f] key and hit [enter] to enter failsafe mode
381 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
382 [ 10.582466] UBIFS (ubi0:1): default file-system created
383 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
384 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
385 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
386 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
387 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
388 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
389 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
390 [ 10.756981] mount_root: switching to ubifs overlay
391 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
392 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
393 [ 10.876085] procd: - early -
394 [ 10.879061] procd: - watchdog -
395 [ 11.550737] procd: - watchdog -
396 [ 11.554202] procd: - ubus -
397 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
398 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
399 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
400 [ 11.625387] procd: - init -
401 Please press Enter to activate this console.
402 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
403 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
404 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
405 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
406 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
407 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
408 [ 12.127574] urngd: v1.0.0 started.
409 [ 12.145053] xt_time: kernel timezone is -0000
410 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
411 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
412 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
413 [ 12.241178]
414 [ 12.266469] random: crng init done
415 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
416 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
417 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
418 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
419 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
420 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
421 [ 20.161193]
422 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
423 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
424 [ 27.852570] PPP generic driver version 2.4.2
425 [ 27.858358] NET: Registered protocol family 24
426 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
427 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
428 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
429 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
430 [ 41.299522] device eth0.2 entered promiscuous mode
431 [ 41.304484] device eth0 entered promiscuous mode
432 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
433 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
434 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
435 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
436
437
438
439 BusyBox v1.31.0 () built-in shell (ash)
440
441 _______ ________ __
442 | |.-----.-----.-----.| | | |.----.| |_
443 | - || _ | -__| || | | || _|| _|
444 |_______|| __|_____|__|__||________||__| |____|
445 |__| W I R E L E S S F R E E D O M
446 -----------------------------------------------------
447 OpenWrt SNAPSHOT, r10942-9bebafcb5d
448 -----------------------------------------------------
449 === WARNING! =====================================
450 There is no root password defined on this device!
451 Use the "passwd" command to set up a new password
452 in order to prevent unauthorized SSH logins.
453 --------------------------------------------------
454 root@OpenWrt:/# ifconfig -a
455 br-lan Link encap:Ethernet HWaddr
456 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
457 inet6 addr: fde0:62db:5134::1/60 Scope:Global
458 inet6 addr: fe80::/64 Scope:Link
459 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
460 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
461 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
462 collisions:0 txqueuelen:1000
463 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
464
465 eth0 Link encap:Ethernet HWaddr
466 inet6 addr: fe80::/64 Scope:Link
467 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
468 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
469 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
470 collisions:0 txqueuelen:1000
471 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
472 Interrupt:21
473
474 eth0.1 Link encap:Ethernet HWaddr
475 inet6 addr: fe80::/64 Scope:Link
476 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
477 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
478 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
479 collisions:0 txqueuelen:1000
480 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
481
482 eth0.2 Link encap:Ethernet HWaddr
483 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
484 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
485 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
486 collisions:0 txqueuelen:1000
487 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
488
489 lo Link encap:Local Loopback
490 inet addr:127.0.0.1 Mask:255.0.0.0
491 inet6 addr: ::1/128 Scope:Host
492 UP LOOPBACK RUNNING MTU:65536 Metric:1
493 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
494 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
495 collisions:0 txqueuelen:1000
496 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
497
498 wlan0 Link encap:Ethernet HWaddr
499 BROADCAST MULTICAST MTU:1500 Metric:1
500 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
501 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
502 collisions:0 txqueuelen:1000
503 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
504
505 wlan1 Link encap:Ethernet HWaddr
506 BROADCAST MULTICAST MTU:1500 Metric:1
507 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
508 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
509 collisions:0 txqueuelen:1000
510 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
511
512 root@OpenWrt:/# ls -l
513 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
514 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
515 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
516 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
517 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
518 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
519 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
520 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
521 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
522 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
523 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
524 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
525 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
526 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
527 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
528 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
529 root@OpenWrt:/# ps
530 PID USER VSZ STAT COMMAND
531 1 root 1576 S /sbin/procd
532 2 root 0 SW [kthreadd]
533 3 root 0 IW [kworker/0:0]
534 4 root 0 IW< [kworker/0:0H]
535 5 root 0 IW [kworker/u8:0]
536 6 root 0 IW< [mm_percpu_wq]
537 7 root 0 SW [ksoftirqd/0]
538 8 root 0 IW [rcu_sched]
539 9 root 0 IW [rcu_bh]
540 10 root 0 SW [migration/0]
541 11 root 0 SW [cpuhp/0]
542 12 root 0 SW [cpuhp/1]
543 13 root 0 SW [migration/1]
544 14 root 0 SW [ksoftirqd/1]
545 16 root 0 IW< [kworker/1:0H]
546 17 root 0 SW [cpuhp/2]
547 18 root 0 SW [migration/2]
548 19 root 0 SW [ksoftirqd/2]
549 21 root 0 IW< [kworker/2:0H]
550 22 root 0 SW [cpuhp/3]
551 23 root 0 SW [migration/3]
552 24 root 0 SW [ksoftirqd/3]
553 25 root 0 IW [kworker/3:0]
554 26 root 0 IW< [kworker/3:0H]
555 27 root 0 IW< [netns]
556 41 root 0 IW [kworker/u8:3]
557 68 root 0 IW [kworker/3:1]
558 69 root 0 IW [kworker/2:1]
559 138 root 0 IW [kworker/1:1]
560 139 root 0 SW [oom_reaper]
561 140 root 0 IW< [writeback]
562 142 root 0 SW [kcompactd0]
563 143 root 0 IW< [crypto]
564 145 root 0 IW< [kblockd]
565 175 root 0 IW< [watchdogd]
566 199 root 0 SW [kswapd0]
567 268 root 0 IW< [pencrypt]
568 270 root 0 IW< [pdecrypt]
569 366 root 0 IW< [ipv6_addrconf]
570 378 root 0 SW [ubi_bgt0d]
571 383 root 0 IW< [kworker/0:1H]
572 384 root 0 IW< [kworker/2:1H]
573 385 root 0 IW [kworker/2:2]
574 386 root 0 IW< [kworker/3:1H]
575 389 root 0 IW< [kworker/1:1H]
576 429 root 0 IW [kworker/0:2]
577 437 root 0 IW [kworker/1:2]
578 453 root 0 SW [scsi_eh_0]
579 454 root 0 IW< [scsi_tmf_0]
580 455 root 0 SW [usb-storage]
581 496 root 0 SW [ubifs_bgt0_1]
582 573 root 1220 S /sbin/ubusd
583 574 root 1220 S /bin/ash --login
584 591 root 1028 S /sbin/urngd
585 660 root 0 IW< [cfg80211]
586 1012 root 1248 S /sbin/logd -S 64
587 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
588 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
589 1168 root 1700 S /sbin/netifd
590 1204 root 1448 S /usr/sbin/odhcpd
591 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
592 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
593 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
594 1720 root 1212 R ps
595 root@OpenWrt:/etc# ping www.google.co
596 PING www.google.co (): 56 data bytes
597 64 bytes from : seq=0 ttl=52 time=4.718 ms
598 ^C
599 --- www.google.co ping statistics ---
600 1 packets transmitted, 1 packets received, 0% packet loss
601 round-trip min/avg/max = 4.718/4.718/4.718 ms
602 root@OpenWrt:/etc# ping www.google.com
603 PING www.google.com (): 56 data bytes
604 64 bytes from : seq=0 ttl=47 time=4.927 ms
605 64 bytes from : seq=1 ttl=47 time=4.687 ms
606 ^C
607 --- www.google.com ping statistics ---
608 2 packets transmitted, 2 packets received, 0% packet loss
609 round-trip min/avg/max = 4.687/4.807/4.927 ms
610 root@OpenWrt:/etc# opkg update
611 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
612 Updated list of available packages in /var/opkg-lists/openwrt_core
613 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
614 Signature check passed.
615 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
616 Updated list of available packages in /var/opkg-lists/openwrt_base
617 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
618 Signature check passed.
619 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
620 Updated list of available packages in /var/opkg-lists/openwrt_luci
621 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
622 Signature check passed.
623 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
624 Updated list of available packages in /var/opkg-lists/openwrt_packages
625 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
626 Signature check passed.
627 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
628 Updated list of available packages in /var/opkg-lists/openwrt_routing
629 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
630 Signature check passed.
631 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
632 Updated list of available packages in /var/opkg-lists/openwrt_telephony
633 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
634 Signature check passed.
635 root@OpenWrt:/etc# opkg install luci
636 Installing luci (git-19.241.65047-dffe9ca-1) to root...
637 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
638 Installing uhttpd (2019-08-17-6b03f960-3) to root...
639 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
640 Installing liblua5.1.5 (5.1.5-5) to root...
641 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
642 Installing lua (5.1.5-5) to root...
643 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
644 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
645 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
646 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
647 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
648 Installing rpcd (2019-06-05-89bfaa42-3) to root...
649 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
650 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
651 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
652 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
653 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
654 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
655 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
656 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
657 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
658 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
659 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
660 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
661 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
662 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
663 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
664 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
665 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
666 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
667 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
668 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
669 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
670 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
671 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
672 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
673 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
674 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
675 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
676 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
677 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
678 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
679 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
680 Installing rpcd-mod-rrdns (20170710) to root...
681 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
682 Configuring liblucihttp0.
683 Configuring luci-app-opkg.
684 Configuring rpcd.
685 Configuring liblua5.1.5.
686 Configuring luci-lib-ip.
687 Configuring libubus-lua.
688 Configuring libiwinfo-lua.
689 Configuring lua.
690 Configuring luci-lib-nixio.
691 Configuring luci-lib-jsonc.
692 Configuring liblucihttp-lua.
693 Configuring luci-base.
694 Configuring luci-mod-system.
695 Configuring luci-theme-bootstrap.
696 Configuring luci-mod-status.
697 Configuring luci-app-firewall.
698 Configuring luci-proto-ppp.
699 Configuring luci-mod-network.
700 Configuring luci-mod-admin-full.
701 Configuring luci-proto-ipv6.
702 Configuring uhttpd.
703 Configuring rpcd-mod-rrdns.
704 Configuring luci.
705 root@OpenWrt:/etc# df -h
706 Filesystem Size Used Available Use% Mounted on
707 /dev/root 2.8M 2.8M 0 100% /rom
708 tmpfs 123.5M 764.0K 122.8M 1% /tmp
709 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
710 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
711 tmpfs 512.0K 0 512.0K 0% /dev
712 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
713 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
714 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
715 [ 2075.984368] device wlan0 entered promiscuous mode
716 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
717 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
718 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
719 [ 2096.494533] device wlan0 left promiscuous mode
720 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
721 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
722 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
723 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
724 [ 2097.404922] device wlan0 entered promiscuous mode
725 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
726 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
727 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
728 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
729 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
730 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
731 [ 2117.964353] device wlan0 left promiscuous mode
732 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
733 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
734 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
735 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
736 [ 2118.804171] device wlan0 entered promiscuous mode
737 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
738 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
739 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
740 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
741 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
742 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
743 [ 2245.748473] device wlan0 left promiscuous mode
744 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
745 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
746 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
747 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
748 [ 2246.557667] device wlan0 entered promiscuous mode
749 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
750 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
751 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
752 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
753 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
754 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
755
756 root@OpenWrt:/etc#
757 root@OpenWrt:/etc# uci show wireless
758 wireless.radio0=wifi-device
759 wireless.radio0.type='mac80211'
760 wireless.radio0.channel='11'
761 wireless.radio0.hwmode='11g'
762 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
763 wireless.radio0.country='00'
764 wireless.radio0.legacy_rates='1'
765 wireless.radio0.htmode='HT20'
766 wireless.default_radio0=wifi-iface
767 wireless.default_radio0.device='radio0'
768 wireless.default_radio0.network='lan'
769 wireless.default_radio0.mode='ap'
770 wireless.default_radio0.encryption='psk2'
771 wireless.default_radio0.key='qwerty1234'
772 wireless.default_radio0.ssid='asdf'
773 wireless.radio1=wifi-device
774 wireless.radio1.type='mac80211'
775 wireless.radio1.channel='36'
776 wireless.radio1.hwmode='11a'
777 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
778 wireless.radio1.htmode='VHT80'
779 wireless.radio1.__toggle='Enable'
780 wireless.radio1.country='00'
781 wireless.radio1.legacy_rates='1'
782 wireless.default_radio1=wifi-iface
783 wireless.default_radio1.device='radio1'
784 wireless.default_radio1.network='lan'
785 wireless.default_radio1.mode='ap'
786 wireless.default_radio1.ssid='asdf'
787 wireless.default_radio1.encryption='psk2'
788 wireless.default_radio1.key='qwerty1234'
789 root@OpenWrt:/etc#
790 {{/code}}
791
792 Firmware:
793
794 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin