Wiki source code of Openwrt for Linksys EA8100

Version 56.1 by Leon Poon on 2021/07/16 10:35
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5 = 21.02.x =
6
7 Thanks to [[this patch>>https://github.com/openwrt/openwrt/commit/97df795b78dc572ea2ec105ccbf8af27cc4b4d8e]], EA8100 is now supported from openwrt 21.02.
8
9 The 21.02 release is currently at RC3. You can get it from [[openwrt firmware selector>>https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ramips%2Fmt7621&id=linksys_ea8100-v1]] page.
10
11 Both 2.4Ghz and 5Ghz wifi are working fine.
12
13 If you are already on 19.07, please do not sysupgrade with 21.02 sysupgrade.bin, because sysupgrade.bin format in 21.02 is not supported by 19.07 sysupgrade utility.
14
15 21.02 images:
16
17 {{code language="none"}}
18 openwrt-21.02.0-rc3-ramips-mt7621-linksys_ea8100-v1-initramfs-kernel.bin: u-boot legacy uImage, MIPS OpenWrt Linux-5.4.124, Linux/MIPS, OS Kernel Image (Not compressed), 4912189 bytes, Sun Jun 13 22:02:19 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0x9C4276B9, Data CRC: 0xBC5373AC
19 openwrt-21.02.0-rc3-ramips-mt7621-linksys_ea8100-v1-squashfs-factory.bin: u-boot legacy uImage, MIPS OpenWrt Linux-5.4.124, Linux/MIPS, OS Kernel Image (Not compressed), 2357363 bytes, Sun Jun 13 22:02:19 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0xAC8B8E31, Data CRC: 0xC42A191A
20 openwrt-21.02.0-rc3-ramips-mt7621-linksys_ea8100-v1-squashfs-sysupgrade.bin: POSIX tar archive (GNU)
21 {{/code}}
22
23 (% class="wikigeneratedid" %)
24 19.07:
25
26 {{code language="none"}}
27 openwrt-ramips-mt7621-ea8100-initramfs-factory.img: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 5049994 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0x9EAE22DC, Data CRC: 0x739C919A
28 openwrt-ramips-mt7621-ea8100-initramfs-kernel.bin: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 5049994 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0x9EAE22DC, Data CRC: 0x739C919A
29 openwrt-ramips-mt7621-ea8100-squashfs-factory.img: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 2012291 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0xD210527A, Data CRC: 0x404E16F6
30 openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 2012291 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0xD210527A, Data CRC: 0x404E16F6
31 {{/code}}
32
33 = 19.07.x =
34
35 Openwrt 19.07.7 for EA8100 is here!
36
37 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
38
39 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
40 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
41
42 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
43
44 (% class="box warningmessage" %)
45 (((
46 Always use a PC connected to the device via wired ethernet for flashing firmwares.
47 )))
48
49 Follow these instructions:
50
51 1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
52 1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
53 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
54 1. Flash **##squashfs-sysupgrade.bin##** via LuCi
55 1. Wait for it to reboot. Now you can configure!
56
57 For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
58
59 {{code language="none"}}
60 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
61 {{/code}}
62
63 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
64
65 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
66
67 {{warning}}
68 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
69 {{/warning}}
70
71 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
72
73 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
74
75 --How to flash if your router currently has stock Linksys firmware:--
76
77 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
78 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
79 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
80 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
81 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
82 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
83 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
84 1. --Run: ##opkg update##--
85 1. --Run: ##**opkg install luci**##--
86 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
87
88 = 18.x =
89
90 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
91
92 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
93 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
94
95 Note that sysupgrade to a newer image is not likely to work.
96
97 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
98 |[[image:1567332570723-651.png]]
99
100 Dmesg:
101
102 {{code language="plain"}}
103 3: Boot system code via Flash (default).
104 4: Entr boot command line interface.
105 7: Load Boot Loader code then write to Flash via Serial.
106 9: Load Boot Loader code then write to Flash via TFTP. 4
107 You choosed 2
108 0
109
110
111 2: System Load Linux Kernel then write to Flash via TFTP.
112 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
113 Please Input new ones /or Ctrl-C to discard
114 Input device IP () ==:
115 Input server IP () ==:
116 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
117 which kernel partition to update (1/2/3=both) (2) ==:3
118
119 NetTxPacket = 0x8FFE3200
120
121 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
122
123 NetLoop,call eth_halt !
124
125 NetLoop,call eth_init !
126 Trying Eth0 (10/100-M)
127
128 Waitting for RX_DMA_BUSY status Start... done
129
130
131 ETH_STATE_ACTIVE!!
132 TFTP from server ; our IP address is
133 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
134
135 TIMEOUT_COUNT=10,Load address: 0x80100000
136 Loading: Got ARP REPLY, set server/gtwy eth addr ()
137 Got it
138 #################################################################
139 #################################################################
140 #################################################################
141 #################################################################
142 #################################################################
143 #################################################################
144 #################################################################
145 #################################################################
146 #################################################################
147 #################################################################
148 #################################################################
149 #################################################################
150 #################################################################
151 #################################################################
152 #################################################################
153 #################################################################
154 #################################################################
155 ################################################
156 done
157 Bytes transferred = 5898496 (5a0100 hex)
158 LoadAddr=80100000 NetBootFileXferSize= 005a0100
159 ranand_erase: start:180000, len:20000
160 ..ranand_erase: start:1a0000, len:20000
161 ..ranand_erase: start:1c0000, len:20000
162 ...
163 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
164 Done!
165 ranand_erase: start:2980000, len:20000
166 ..ranand_erase: start:29a0000, len:20000
167 ..ranand_erase: start:29c0000, len:20000
168 ...
169 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
170 Done!
171 ## Booting image at bc180000 ...
172 Image Name: MIPS OpenWrt Linux-4.14.141
173 Image Type: MIPS Linux Kernel Image (lzma compressed)
174 Data Size: 2010110 Bytes = 1.9 MB
175 Load Address: 80001000
176 Entry Point: 80001000
177 ............................... Verifying Checksum ... OK
178 Uncompressing Kernel Image ... OK
179 No initrd
180 ## Transferring control to Linux (at address 80001000) ...
181 ## Giving linux memsize in MB, 256
182
183 Starting kernel ...
184
185 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
186 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
187 [ 0.000000] bootconsole [early0] enabled
188 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
189 [ 0.000000] MIPS: machine is Linksys EA8100
190 [ 0.000000] Determined physical RAM map:
191 [ 0.000000] memory: 10000000 @ 00000000 (usable)
192 [ 0.000000] Initrd not found or empty - disabling initrd
193 [ 0.000000] VPE topology {2,2} total 4
194 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
195 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
196 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
197 [ 0.000000] Zone ranges:
198 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
199 [ 0.000000] HighMem empty
200 [ 0.000000] Movable zone start for each node
201 [ 0.000000] Early memory node ranges
202 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
203 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
204 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
205 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
206 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
207 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
208 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
209 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
210 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
211 [ 0.000000] Writing ErrCtl register=0002c420
212 [ 0.000000] Readback ErrCtl register=0002c420
213 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
214 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
215 [ 0.000000] Hierarchical RCU implementation.
216 [ 0.000000] NR_IRQS: 256
217 [ 0.000000] CPU Clock: 880MHz
218 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
219 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
220 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
221 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
222 [ 0.073969] pid_max: default: 32768 minimum: 301
223 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
224 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
225 [ 0.094340] Hierarchical SRCU implementation.
226 [ 0.099495] smp: Bringing up secondary CPUs ...
227 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
228 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
229 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
230 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
231 [ 0.164211] Synchronize counters for CPU 1: done.
232 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
233 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
234 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
235 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
236 [ 0.255179] Synchronize counters for CPU 2: done.
237 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
238 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
239 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
240 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
241 [ 0.340367] Synchronize counters for CPU 3: done.
242 [ 0.370232] smp: Brought up 1 node, 4 CPUs
243 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
244 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
245 [ 0.394408] pinctrl core: initialized pinctrl subsystem
246 [ 0.401009] NET: Registered protocol family 16
247 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
248 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
249 [ 0.725598] ***** Xtal 40MHz *****
250 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
251 [ 0.734049] Port 0 N_FTS = 1b102800
252 [ 0.737517] Port 1 N_FTS = 1b102800
253 [ 0.740963] Port 2 N_FTS = 1b102800
254 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
255 [ 1.900719] -> 21007f2
256 [ 1.903123] PCIE0 enabled
257 [ 1.905712] PCIE1 enabled
258 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
259 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
260 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
261 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
262 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
263 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
264 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
265 [ 1.958178] PCI host bridge to bus 0000:00
266 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
267 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
268 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
269 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
270 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
271 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
272 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
273 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
274 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
275 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
276 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
277 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
278 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
279 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
280 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
281 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
282 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
283 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
284 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
285 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
286 [ 2.100582] clocksource: Switched to clocksource GIC
287 [ 2.107275] NET: Registered protocol family 2
288 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
289 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
290 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
291 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
292 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
293 [ 2.144212] NET: Registered protocol family 1
294 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
295 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
296 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
297 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
298 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
299 [ 2.425815] random: fast init done
300 [ 2.430745] io scheduler noop registered
301 [ 2.434579] io scheduler deadline registered (default)
302 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
303 [ 2.448257] console [ttyS0] disabled
304 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
305 [ 2.460836] console [ttyS0] enabled
306 [ 2.460836] console [ttyS0] enabled
307 [ 2.467691] bootconsole [early0] disabled
308 [ 2.467691] bootconsole [early0] disabled
309 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
310 [ 2.484816] Enable NFI Clock
311 [ 2.487689] # MTK NAND # : Use HW ECC
312 [ 2.491382] Device not found, ID: c2f1
313 [ 2.495110] Not Support this Device!
314 [ 2.498835] chip_mode=00000001
315 [ 2.501893] Support this Device in MTK table! c2f1
316 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
317 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
318 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
319 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
320 [ 2.531927] Scanning device for bad blocks
321 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
322 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
323 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
324 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
325 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
326 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
327 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
328 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
329 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
330 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
331 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
332 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
333 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
334 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
335 [ 3.456742] [mtk_nand] probe successfully!
336 [ 3.461570] Signature matched and data read!
337 [ 3.465818] load_fact_bbt success 1023
338 [ 3.470276] libphy: Fixed MDIO Bus: probed
339 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
340 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
341 [ 3.556774] libphy: mdio: probed
342 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
343 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
344 [ 4.978262] NET: Registered protocol family 10
345 [ 4.984286] Segment Routing with IPv6
346 [ 4.988020] NET: Registered protocol family 17
347 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
348 [ 4.999621] UBI: auto-attach mtd9
349 [ 5.003015] ubi0: attaching mtd9
350 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
351 [ 5.039967] ubi0: scanning is finished
352 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
353 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
354 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
355 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
356 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
357 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
358 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
359 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
360 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
361 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
362 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
363 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
364 [ 5.165234] hctosys: unable to open rtc device (rtc0)
365 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
366 [ 5.195491] Freeing unused kernel memory: 1260K
367 [ 5.200022] This architecture does not have kernel memory protection.
368 [ 5.783744] init: Console is alive
369 [ 5.787378] init: - watchdog -
370 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
371 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
372 [ 6.591413] usbcore: registered new interface driver usbfs
373 [ 6.596966] usbcore: registered new interface driver hub
374 [ 6.602453] usbcore: registered new device driver usb
375 [ 6.615285] SCSI subsystem initialized
376 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
377 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
378 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
379 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
380 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
381 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
382 [ 6.676639] hub 1-0:1.0: USB hub found
383 [ 6.680467] hub 1-0:1.0: 2 ports detected
384 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
385 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
386 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
387 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
388 [ 6.713446] hub 2-0:1.0: USB hub found
389 [ 6.717275] hub 2-0:1.0: 1 port detected
390 [ 6.727313] usbcore: registered new interface driver usb-storage
391 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
392 [ 6.750877] init: - preinit -
393 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
394 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
395 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
396 [ 7.225920] scsi host0: usb-storage 2-1:1.0
397 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
398 Press the [f] key and hit [enter] to enter failsafe mode
399 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
400 [ 10.582466] UBIFS (ubi0:1): default file-system created
401 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
402 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
403 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
404 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
405 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
406 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
407 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
408 [ 10.756981] mount_root: switching to ubifs overlay
409 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
410 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
411 [ 10.876085] procd: - early -
412 [ 10.879061] procd: - watchdog -
413 [ 11.550737] procd: - watchdog -
414 [ 11.554202] procd: - ubus -
415 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
416 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
417 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
418 [ 11.625387] procd: - init -
419 Please press Enter to activate this console.
420 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
421 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
422 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
423 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
424 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
425 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
426 [ 12.127574] urngd: v1.0.0 started.
427 [ 12.145053] xt_time: kernel timezone is -0000
428 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
429 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
430 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
431 [ 12.241178]
432 [ 12.266469] random: crng init done
433 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
434 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
435 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
436 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
437 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
438 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
439 [ 20.161193]
440 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
441 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
442 [ 27.852570] PPP generic driver version 2.4.2
443 [ 27.858358] NET: Registered protocol family 24
444 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
445 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
446 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
447 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
448 [ 41.299522] device eth0.2 entered promiscuous mode
449 [ 41.304484] device eth0 entered promiscuous mode
450 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
451 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
452 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
453 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
454
455
456
457 BusyBox v1.31.0 () built-in shell (ash)
458
459 _______ ________ __
460 | |.-----.-----.-----.| | | |.----.| |_
461 | - || _ | -__| || | | || _|| _|
462 |_______|| __|_____|__|__||________||__| |____|
463 |__| W I R E L E S S F R E E D O M
464 -----------------------------------------------------
465 OpenWrt SNAPSHOT, r10942-9bebafcb5d
466 -----------------------------------------------------
467 === WARNING! =====================================
468 There is no root password defined on this device!
469 Use the "passwd" command to set up a new password
470 in order to prevent unauthorized SSH logins.
471 --------------------------------------------------
472 root@OpenWrt:/# ifconfig -a
473 br-lan Link encap:Ethernet HWaddr
474 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
475 inet6 addr: fde0:62db:5134::1/60 Scope:Global
476 inet6 addr: fe80::/64 Scope:Link
477 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
478 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
479 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
480 collisions:0 txqueuelen:1000
481 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
482
483 eth0 Link encap:Ethernet HWaddr
484 inet6 addr: fe80::/64 Scope:Link
485 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
486 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
487 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
488 collisions:0 txqueuelen:1000
489 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
490 Interrupt:21
491
492 eth0.1 Link encap:Ethernet HWaddr
493 inet6 addr: fe80::/64 Scope:Link
494 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
495 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
496 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
497 collisions:0 txqueuelen:1000
498 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
499
500 eth0.2 Link encap:Ethernet HWaddr
501 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
502 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
503 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
504 collisions:0 txqueuelen:1000
505 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
506
507 lo Link encap:Local Loopback
508 inet addr:127.0.0.1 Mask:255.0.0.0
509 inet6 addr: ::1/128 Scope:Host
510 UP LOOPBACK RUNNING MTU:65536 Metric:1
511 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
512 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
513 collisions:0 txqueuelen:1000
514 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
515
516 wlan0 Link encap:Ethernet HWaddr
517 BROADCAST MULTICAST MTU:1500 Metric:1
518 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
519 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
520 collisions:0 txqueuelen:1000
521 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
522
523 wlan1 Link encap:Ethernet HWaddr
524 BROADCAST MULTICAST MTU:1500 Metric:1
525 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
526 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
527 collisions:0 txqueuelen:1000
528 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
529
530 root@OpenWrt:/# ls -l
531 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
532 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
533 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
534 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
535 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
536 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
537 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
538 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
539 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
540 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
541 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
542 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
543 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
544 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
545 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
546 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
547 root@OpenWrt:/# ps
548 PID USER VSZ STAT COMMAND
549 1 root 1576 S /sbin/procd
550 2 root 0 SW [kthreadd]
551 3 root 0 IW [kworker/0:0]
552 4 root 0 IW< [kworker/0:0H]
553 5 root 0 IW [kworker/u8:0]
554 6 root 0 IW< [mm_percpu_wq]
555 7 root 0 SW [ksoftirqd/0]
556 8 root 0 IW [rcu_sched]
557 9 root 0 IW [rcu_bh]
558 10 root 0 SW [migration/0]
559 11 root 0 SW [cpuhp/0]
560 12 root 0 SW [cpuhp/1]
561 13 root 0 SW [migration/1]
562 14 root 0 SW [ksoftirqd/1]
563 16 root 0 IW< [kworker/1:0H]
564 17 root 0 SW [cpuhp/2]
565 18 root 0 SW [migration/2]
566 19 root 0 SW [ksoftirqd/2]
567 21 root 0 IW< [kworker/2:0H]
568 22 root 0 SW [cpuhp/3]
569 23 root 0 SW [migration/3]
570 24 root 0 SW [ksoftirqd/3]
571 25 root 0 IW [kworker/3:0]
572 26 root 0 IW< [kworker/3:0H]
573 27 root 0 IW< [netns]
574 41 root 0 IW [kworker/u8:3]
575 68 root 0 IW [kworker/3:1]
576 69 root 0 IW [kworker/2:1]
577 138 root 0 IW [kworker/1:1]
578 139 root 0 SW [oom_reaper]
579 140 root 0 IW< [writeback]
580 142 root 0 SW [kcompactd0]
581 143 root 0 IW< [crypto]
582 145 root 0 IW< [kblockd]
583 175 root 0 IW< [watchdogd]
584 199 root 0 SW [kswapd0]
585 268 root 0 IW< [pencrypt]
586 270 root 0 IW< [pdecrypt]
587 366 root 0 IW< [ipv6_addrconf]
588 378 root 0 SW [ubi_bgt0d]
589 383 root 0 IW< [kworker/0:1H]
590 384 root 0 IW< [kworker/2:1H]
591 385 root 0 IW [kworker/2:2]
592 386 root 0 IW< [kworker/3:1H]
593 389 root 0 IW< [kworker/1:1H]
594 429 root 0 IW [kworker/0:2]
595 437 root 0 IW [kworker/1:2]
596 453 root 0 SW [scsi_eh_0]
597 454 root 0 IW< [scsi_tmf_0]
598 455 root 0 SW [usb-storage]
599 496 root 0 SW [ubifs_bgt0_1]
600 573 root 1220 S /sbin/ubusd
601 574 root 1220 S /bin/ash --login
602 591 root 1028 S /sbin/urngd
603 660 root 0 IW< [cfg80211]
604 1012 root 1248 S /sbin/logd -S 64
605 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
606 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
607 1168 root 1700 S /sbin/netifd
608 1204 root 1448 S /usr/sbin/odhcpd
609 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
610 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
611 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
612 1720 root 1212 R ps
613 root@OpenWrt:/etc# ping www.google.co
614 PING www.google.co (): 56 data bytes
615 64 bytes from : seq=0 ttl=52 time=4.718 ms
616 ^C
617 --- www.google.co ping statistics ---
618 1 packets transmitted, 1 packets received, 0% packet loss
619 round-trip min/avg/max = 4.718/4.718/4.718 ms
620 root@OpenWrt:/etc# ping www.google.com
621 PING www.google.com (): 56 data bytes
622 64 bytes from : seq=0 ttl=47 time=4.927 ms
623 64 bytes from : seq=1 ttl=47 time=4.687 ms
624 ^C
625 --- www.google.com ping statistics ---
626 2 packets transmitted, 2 packets received, 0% packet loss
627 round-trip min/avg/max = 4.687/4.807/4.927 ms
628 root@OpenWrt:/etc# opkg update
629 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
630 Updated list of available packages in /var/opkg-lists/openwrt_core
631 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
632 Signature check passed.
633 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
634 Updated list of available packages in /var/opkg-lists/openwrt_base
635 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
636 Signature check passed.
637 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
638 Updated list of available packages in /var/opkg-lists/openwrt_luci
639 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
640 Signature check passed.
641 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
642 Updated list of available packages in /var/opkg-lists/openwrt_packages
643 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
644 Signature check passed.
645 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
646 Updated list of available packages in /var/opkg-lists/openwrt_routing
647 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
648 Signature check passed.
649 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
650 Updated list of available packages in /var/opkg-lists/openwrt_telephony
651 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
652 Signature check passed.
653 root@OpenWrt:/etc# opkg install luci
654 Installing luci (git-19.241.65047-dffe9ca-1) to root...
655 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
656 Installing uhttpd (2019-08-17-6b03f960-3) to root...
657 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
658 Installing liblua5.1.5 (5.1.5-5) to root...
659 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
660 Installing lua (5.1.5-5) to root...
661 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
662 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
663 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
664 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
665 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
666 Installing rpcd (2019-06-05-89bfaa42-3) to root...
667 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
668 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
669 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
670 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
671 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
672 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
673 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
674 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
675 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
676 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
677 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
678 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
679 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
680 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
681 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
682 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
683 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
684 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
685 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
686 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
687 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
688 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
689 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
690 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
691 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
692 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
693 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
694 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
695 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
696 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
697 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
698 Installing rpcd-mod-rrdns (20170710) to root...
699 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
700 Configuring liblucihttp0.
701 Configuring luci-app-opkg.
702 Configuring rpcd.
703 Configuring liblua5.1.5.
704 Configuring luci-lib-ip.
705 Configuring libubus-lua.
706 Configuring libiwinfo-lua.
707 Configuring lua.
708 Configuring luci-lib-nixio.
709 Configuring luci-lib-jsonc.
710 Configuring liblucihttp-lua.
711 Configuring luci-base.
712 Configuring luci-mod-system.
713 Configuring luci-theme-bootstrap.
714 Configuring luci-mod-status.
715 Configuring luci-app-firewall.
716 Configuring luci-proto-ppp.
717 Configuring luci-mod-network.
718 Configuring luci-mod-admin-full.
719 Configuring luci-proto-ipv6.
720 Configuring uhttpd.
721 Configuring rpcd-mod-rrdns.
722 Configuring luci.
723 root@OpenWrt:/etc# df -h
724 Filesystem Size Used Available Use% Mounted on
725 /dev/root 2.8M 2.8M 0 100% /rom
726 tmpfs 123.5M 764.0K 122.8M 1% /tmp
727 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
728 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
729 tmpfs 512.0K 0 512.0K 0% /dev
730 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
731 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
732 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
733 [ 2075.984368] device wlan0 entered promiscuous mode
734 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
735 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
736 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
737 [ 2096.494533] device wlan0 left promiscuous mode
738 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
739 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
740 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
741 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
742 [ 2097.404922] device wlan0 entered promiscuous mode
743 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
744 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
745 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
746 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
747 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
748 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
749 [ 2117.964353] device wlan0 left promiscuous mode
750 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
751 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
752 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
753 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
754 [ 2118.804171] device wlan0 entered promiscuous mode
755 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
756 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
757 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
758 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
759 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
760 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
761 [ 2245.748473] device wlan0 left promiscuous mode
762 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
763 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
764 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
765 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
766 [ 2246.557667] device wlan0 entered promiscuous mode
767 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
768 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
769 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
770 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
771 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
772 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
773
774 root@OpenWrt:/etc#
775 root@OpenWrt:/etc# uci show wireless
776 wireless.radio0=wifi-device
777 wireless.radio0.type='mac80211'
778 wireless.radio0.channel='11'
779 wireless.radio0.hwmode='11g'
780 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
781 wireless.radio0.country='00'
782 wireless.radio0.legacy_rates='1'
783 wireless.radio0.htmode='HT20'
784 wireless.default_radio0=wifi-iface
785 wireless.default_radio0.device='radio0'
786 wireless.default_radio0.network='lan'
787 wireless.default_radio0.mode='ap'
788 wireless.default_radio0.encryption='psk2'
789 wireless.default_radio0.key='qwerty1234'
790 wireless.default_radio0.ssid='asdf'
791 wireless.radio1=wifi-device
792 wireless.radio1.type='mac80211'
793 wireless.radio1.channel='36'
794 wireless.radio1.hwmode='11a'
795 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
796 wireless.radio1.htmode='VHT80'
797 wireless.radio1.__toggle='Enable'
798 wireless.radio1.country='00'
799 wireless.radio1.legacy_rates='1'
800 wireless.default_radio1=wifi-iface
801 wireless.default_radio1.device='radio1'
802 wireless.default_radio1.network='lan'
803 wireless.default_radio1.mode='ap'
804 wireless.default_radio1.ssid='asdf'
805 wireless.default_radio1.encryption='psk2'
806 wireless.default_radio1.key='qwerty1234'
807 root@OpenWrt:/etc#
808 {{/code}}
809
810 Firmware:
811
812 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin