Wiki source code of Openwrt for Linksys EA8100

Version 57.1 by Leon Poon on 2021/07/16 10:40
Show last authors
1 switch0: port 0 = wan, port 1,2,3,4 = lan
2
3 If you brick your router you should be able to recover by soldering the UART pin headers and connecting to the serial. See [[this page for pictures>>doc:Linksys EA8100.WebHome]].
4
5 = 21.02.x =
6
7 Thanks to [[this patch>>https://github.com/openwrt/openwrt/commit/97df795b78dc572ea2ec105ccbf8af27cc4b4d8e]], EA8100 is now supported from openwrt 21.02.
8
9 The 21.02 release is currently at RC3. You can get it from [[openwrt firmware selector>>https://firmware-selector.openwrt.org/?version=21.02.0-rc3&target=ramips%2Fmt7621&id=linksys_ea8100-v1]] page.
10
11 Both 2.4Ghz and 5Ghz wifi are working fine.
12
13 If you are already on 19.07, please do not sysupgrade with 21.02 sysupgrade.bin, because sysupgrade.bin format in 21.02 is not supported by 19.07 sysupgrade utility.
14
15 21.02 images:
16
17 {{code language="none"}}
18 openwrt-21.02.0-rc3-ramips-mt7621-linksys_ea8100-v1-initramfs-kernel.bin: u-boot legacy uImage, MIPS OpenWrt Linux-5.4.124, Linux/MIPS, OS Kernel Image (Not compressed), 4912189 bytes, Sun Jun 13 22:02:19 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0x9C4276B9, Data CRC: 0xBC5373AC
19 openwrt-21.02.0-rc3-ramips-mt7621-linksys_ea8100-v1-squashfs-factory.bin: u-boot legacy uImage, MIPS OpenWrt Linux-5.4.124, Linux/MIPS, OS Kernel Image (Not compressed), 2357363 bytes, Sun Jun 13 22:02:19 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0xAC8B8E31, Data CRC: 0xC42A191A
20 openwrt-21.02.0-rc3-ramips-mt7621-linksys_ea8100-v1-squashfs-sysupgrade.bin: POSIX tar archive (GNU)
21 {{/code}}
22
23 (% class="wikigeneratedid" %)
24 19.07:
25
26 {{code language="none"}}
27 openwrt-ramips-mt7621-ea8100-initramfs-factory.img: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 5049994 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0x9EAE22DC, Data CRC: 0x739C919A
28 openwrt-ramips-mt7621-ea8100-initramfs-kernel.bin: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 5049994 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0x9EAE22DC, Data CRC: 0x739C919A
29 openwrt-ramips-mt7621-ea8100-squashfs-factory.img: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 2012291 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0xD210527A, Data CRC: 0x404E16F6
30 openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin: u-boot legacy uImage, MIPS OpenWrt Linux-4.14.221, Linux/MIPS, OS Kernel Image (lzma), 2012291 bytes, Mon Feb 15 15:22:37 2021, Load Address: 0x80001000, Entry Point: 0x80001000, Header CRC: 0xD210527A, Data CRC: 0x404E16F6
31 {{/code}}
32
33
34
35 Flashing 21.02 squashfs-sysupgrade.bin using sysupgrade in 19.07 will soft brick your router. (Sysupgrade will likely reject the image anyway, and you will have to use force flag if you really want to do it.)
36
37 If you insist, force flashing the 21.02 squashfs-factory.bin should allow you to succeed in the upgrade. (Not tested.)
38
39 = 19.07.x =
40
41 Openwrt 19.07.7 for EA8100 is here!
42
43 Since [[19.07.03>>https://www.codepowered.com/openwrt/v19.07.3/linksys_ea8100/]], as of 19.07.07:
44
45 * Wifi (5Ghz) seem to work at 30-40MB/s with a MacBook Pro.
46 * **Known issue**: 2.4Ghz wifi performance is really bad. You probably want to disable 2.4Ghz wifi.
47
48 UPDATED 2020-12-10 the 19.07.04 and later builds now includes LuCi!
49
50 (% class="box warningmessage" %)
51 (((
52 Always use a PC connected to the device via wired ethernet for flashing firmwares.
53 )))
54
55 Follow these instructions:
56
57 1. Download ##[[initramfs-factory.img>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-initramfs-factory.img]]## and ##[[squashfs-sysupgrade.bin>>https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin||style="background-color: rgb(255, 255, 255);"]]##
58 1. Access Linksys UI (default [[http:~~/~~/192.168.10.1/>>http://192.168.10.1/]]). Flash **##initramfs-factory.img##**. It will reboot.
59 1. Wait for Openwrt to boot so that you get to LuCi at [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You might need to restart your PC so that it gets a ##192.168.1.x## address from openwrt. Once you get LuCI, do NOT configure yet! It's not ready.
60 1. Flash **##squashfs-sysupgrade.bin##** via LuCi
61 1. Wait for it to reboot. Now you can configure!
62
63 For kernel modules, replace the relevant link in your ##/etc/opkg/distfeeds.conf(% class="small" %) (%%)##with this:
64
65 {{code language="none"}}
66 src/gz openwrt_core https://www.codepowered.com/openwrt/v19.07.7/bin/targets/ramips/mt7621/packages
67 {{/code}}
68
69 If you are on my 18.x below, sysupgrading to a 19.07 image will not work. You have to manually mtd write the 19.07 "kernel-initramfs.bin" into the nand and boot/log into it (192.168.1.1), then sysupgrade.
70
71 Sysupgrade from 19.07.x to another 19.07.y will work. You can also upgrade via LuCI.
72
73 {{warning}}
74 Upgrading images will wipe entire firmware partitions! Backup your files/config before sysupgrade. It will reset router ip to 192.168.1.1.
75 {{/warning}}
76
77 --**Images do not contain LuCi! (The build process doesn't include it for some reason I have not yet time to figure out.)** You need to have the **squashfs-sysupgrade.bin** flashed, then install LuCI. (See instructions below.)--
78
79 --The EA8100 contains 2 firmware partitions. Using the Linksys UI will flash openwrt into only one of the 2 partitions. The booting process switches partition every few boots, so if you want to always boot into openwrt then you have to flash openwrt into both partitions.--
80
81 --How to flash if your router currently has stock Linksys firmware:--
82
83 1. --Download the "**openwrt-ramips-mt7621-ea8100-initramfs-kernel-factory.img**" from link above, and flash it via Linksys UI. Wait for it to start to reboot.--
84 1. --Configure your computer to have IP in ##192.168.1.2/255.255.255.0##.--
85 1. --Check that your router booted Openwrt by visiting [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. It is in Openwrt if you see a white screen with message: "Index of /." Do a reboot if you see Linksys UI instead, then check again when it boots. --
86 1. --Download the "**openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin**" from link above, and upload it into ##/tmp## in the router via SFTP. You can use [[winscp>>doc:How to WinSCP.WebHome]] if on Windows. [[root@192.168.1.1>>mailto:root@192.168.1.1]] (No password).--
87 1. --Ssh into [[root@192.168.1.1>>mailto:root@192.168.1.1]] (no password). Use [[putty>>doc:How to Putty.WebHome]] to ssh if you are on Windows.--
88 1. --In the ssh shell run: ##sysupgrade /tmp/openwrt-ramips-mt7621-ea8100-squashfs-sysupgrade.bin##--
89 1. --It automatically reboots after a short while. Log in via SSH again. Check you are online by pinging 8.8.8.8 when in SSH.--
90 1. --Run: ##opkg update##--
91 1. --Run: ##**opkg install luci**##--
92 1. --Access LuCI via [[http:~~/~~/192.168.1.1/>>http://192.168.1.1/]]. You can now configure.--
93
94 = 18.x =
95
96 9bebafcb5dfe37f25285fa18fb8bfe7b68011267 (with wifi support) Download:
97
98 * [[initramfs-kernel.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]]
99 * [[squashfs-sysupgrade.bin>>attach:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade-9bebafcb5dfe37f25285fa18fb8bfe7b68011267.bin]] (accepted as upgrade in factory UI)
100
101 Note that sysupgrade to a newer image is not likely to work.
102
103 (% border="1" cellpadding="0" cellspacing="0" style="margin-right:auto; width:auto" %)
104 |[[image:1567332570723-651.png]]
105
106 Dmesg:
107
108 {{code language="plain"}}
109 3: Boot system code via Flash (default).
110 4: Entr boot command line interface.
111 7: Load Boot Loader code then write to Flash via Serial.
112 9: Load Boot Loader code then write to Flash via TFTP. 4
113 You choosed 2
114 0
115
116
117 2: System Load Linux Kernel then write to Flash via TFTP.
118 Warning!! Erase Linux in Flash then burn new one. Are you sure?(Y/N)
119 Please Input new ones /or Ctrl-C to discard
120 Input device IP () ==:
121 Input server IP () ==:
122 Input Linux Kernel filename (openwrt-ramips-mt7621-linksys_ea8100-initramfs-kernel.bin) ==:openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin
123 which kernel partition to update (1/2/3=both) (2) ==:3
124
125 NetTxPacket = 0x8FFE3200
126
127 KSEG1ADDR(NetTxPacket) = 0xAFFE3200
128
129 NetLoop,call eth_halt !
130
131 NetLoop,call eth_init !
132 Trying Eth0 (10/100-M)
133
134 Waitting for RX_DMA_BUSY status Start... done
135
136
137 ETH_STATE_ACTIVE!!
138 TFTP from server ; our IP address is
139 Filename 'openwrt-ramips-mt7621-linksys_ea8100-squashfs-sysupgrade.bin'.
140
141 TIMEOUT_COUNT=10,Load address: 0x80100000
142 Loading: Got ARP REPLY, set server/gtwy eth addr ()
143 Got it
144 #################################################################
145 #################################################################
146 #################################################################
147 #################################################################
148 #################################################################
149 #################################################################
150 #################################################################
151 #################################################################
152 #################################################################
153 #################################################################
154 #################################################################
155 #################################################################
156 #################################################################
157 #################################################################
158 #################################################################
159 #################################################################
160 #################################################################
161 ################################################
162 done
163 Bytes transferred = 5898496 (5a0100 hex)
164 LoadAddr=80100000 NetBootFileXferSize= 005a0100
165 ranand_erase: start:180000, len:20000
166 ..ranand_erase: start:1a0000, len:20000
167 ..ranand_erase: start:1c0000, len:20000
168 ...
169 .(5192)offs=7471104 piece=0 piece_size=256 rc=0
170 Done!
171 ranand_erase: start:2980000, len:20000
172 ..ranand_erase: start:29a0000, len:20000
173 ..ranand_erase: start:29c0000, len:20000
174 ...
175 .(5192)offs=49676288 piece=0 piece_size=256 rc=0
176 Done!
177 ## Booting image at bc180000 ...
178 Image Name: MIPS OpenWrt Linux-4.14.141
179 Image Type: MIPS Linux Kernel Image (lzma compressed)
180 Data Size: 2010110 Bytes = 1.9 MB
181 Load Address: 80001000
182 Entry Point: 80001000
183 ............................... Verifying Checksum ... OK
184 Uncompressing Kernel Image ... OK
185 No initrd
186 ## Transferring control to Linux (at address 80001000) ...
187 ## Giving linux memsize in MB, 256
188
189 Starting kernel ...
190
191 [ 0.000000] Linux version 4.14.141 () (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10942-9bebafcb5d)) #0 SMP Sun Sep 1 06:04:50 2019
192 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
193 [ 0.000000] bootconsole [early0] enabled
194 [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
195 [ 0.000000] MIPS: machine is Linksys EA8100
196 [ 0.000000] Determined physical RAM map:
197 [ 0.000000] memory: 10000000 @ 00000000 (usable)
198 [ 0.000000] Initrd not found or empty - disabling initrd
199 [ 0.000000] VPE topology {2,2} total 4
200 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
201 [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
202 [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
203 [ 0.000000] Zone ranges:
204 [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff]
205 [ 0.000000] HighMem empty
206 [ 0.000000] Movable zone start for each node
207 [ 0.000000] Early memory node ranges
208 [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff]
209 [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff]
210 [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 with crng_init=0
211 [ 0.000000] percpu: Embedded 14 pages/cpu s26064 r8192 d23088 u57344
212 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
213 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
214 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
215 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
216 [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
217 [ 0.000000] Writing ErrCtl register=0002c420
218 [ 0.000000] Readback ErrCtl register=0002c420
219 [ 0.000000] Memory: 251700K/262144K available (4796K kernel code, 251K rwdata, 1040K rodata, 1260K init, 254K bss, 10444K reserved, 0K cma-reserved, 0K highmem)
220 [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
221 [ 0.000000] Hierarchical RCU implementation.
222 [ 0.000000] NR_IRQS: 256
223 [ 0.000000] CPU Clock: 880MHz
224 [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
225 [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
226 [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
227 [ 0.007802] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
228 [ 0.073969] pid_max: default: 32768 minimum: 301
229 [ 0.078775] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
230 [ 0.085284] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
231 [ 0.094340] Hierarchical SRCU implementation.
232 [ 0.099495] smp: Bringing up secondary CPUs ...
233 [ 0.114811] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
234 [ 0.114820] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
235 [ 0.114831] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
236 [ 0.114963] CPU1 revision is: 0001992f (MIPS 1004Kc)
237 [ 0.164211] Synchronize counters for CPU 1: done.
238 [ 0.208189] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
239 [ 0.208197] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
240 [ 0.208206] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
241 [ 0.208284] CPU2 revision is: 0001992f (MIPS 1004Kc)
242 [ 0.255179] Synchronize counters for CPU 2: done.
243 [ 0.295789] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
244 [ 0.295797] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
245 [ 0.295805] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
246 [ 0.295885] CPU3 revision is: 0001992f (MIPS 1004Kc)
247 [ 0.340367] Synchronize counters for CPU 3: done.
248 [ 0.370232] smp: Brought up 1 node, 4 CPUs
249 [ 0.378204] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
250 [ 0.388001] futex hash table entries: 1024 (order: 3, 32768 bytes)
251 [ 0.394408] pinctrl core: initialized pinctrl subsystem
252 [ 0.401009] NET: Registered protocol family 16
253 [ 0.415266] pull PCIe RST: RALINK_RSTCTRL = 4000000
254 [ 0.720548] release PCIe RST: RALINK_RSTCTRL = 7000000
255 [ 0.725598] ***** Xtal 40MHz *****
256 [ 0.728952] release PCIe RST: RALINK_RSTCTRL = 7000000
257 [ 0.734049] Port 0 N_FTS = 1b102800
258 [ 0.737517] Port 1 N_FTS = 1b102800
259 [ 0.740963] Port 2 N_FTS = 1b102800
260 [ 1.896358] PCIE2 no card, disable it(RST&CLK)
261 [ 1.900719] -> 21007f2
262 [ 1.903123] PCIE0 enabled
263 [ 1.905712] PCIE1 enabled
264 [ 1.908316] PCI host bridge /pcie@1e140000 ranges:
265 [ 1.913096] MEM 0x0000000060000000..0x000000006fffffff
266 [ 1.918245] IO 0x000000001e160000..0x000000001e16ffff
267 [ 1.923451] PCI coherence region base: 0xbfbf8000, mask/settings: 0x60000000
268 [ 1.939415] mt7621_gpio 1e000600.gpio: registering 32 gpios
269 [ 1.945254] mt7621_gpio 1e000600.gpio: registering 32 gpios
270 [ 1.950961] mt7621_gpio 1e000600.gpio: registering 32 gpios
271 [ 1.958178] PCI host bridge to bus 0000:00
272 [ 1.962213] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
273 [ 1.969068] pci_bus 0000:00: root bus resource [io 0xffffffff]
274 [ 1.974896] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
275 [ 1.981655] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
276 [ 1.990318] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
277 [ 1.998262] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
278 [ 2.007510] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
279 [ 2.014070] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
280 [ 2.020937] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
281 [ 2.027521] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
282 [ 2.034415] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
283 [ 2.041173] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
284 [ 2.047897] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
285 [ 2.054657] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
286 [ 2.061377] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
287 [ 2.068661] pci 0000:00:00.0: PCI bridge to [bus 01]
288 [ 2.073551] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
289 [ 2.080327] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
290 [ 2.087559] pci 0000:00:01.0: PCI bridge to [bus 02]
291 [ 2.092502] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
292 [ 2.100582] clocksource: Switched to clocksource GIC
293 [ 2.107275] NET: Registered protocol family 2
294 [ 2.112196] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
295 [ 2.119081] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
296 [ 2.125539] TCP: Hash tables configured (established 2048 bind 2048)
297 [ 2.131955] UDP hash table entries: 256 (order: 1, 8192 bytes)
298 [ 2.137713] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
299 [ 2.144212] NET: Registered protocol family 1
300 [ 2.380532] 4 CPUs re-calibrate udelay(lpj = 2924544)
301 [ 2.387039] Crashlog allocated RAM at address 0x3f00000
302 [ 2.392460] workingset: timestamp_bits=14 max_order=16 bucket_order=2
303 [ 2.408000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
304 [ 2.413806] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
305 [ 2.425815] random: fast init done
306 [ 2.430745] io scheduler noop registered
307 [ 2.434579] io scheduler deadline registered (default)
308 [ 2.440747] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
309 [ 2.448257] console [ttyS0] disabled
310 [ 2.451855] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
311 [ 2.460836] console [ttyS0] enabled
312 [ 2.460836] console [ttyS0] enabled
313 [ 2.467691] bootconsole [early0] disabled
314 [ 2.467691] bootconsole [early0] disabled
315 [ 2.477567] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error
316 [ 2.484816] Enable NFI Clock
317 [ 2.487689] # MTK NAND # : Use HW ECC
318 [ 2.491382] Device not found, ID: c2f1
319 [ 2.495110] Not Support this Device!
320 [ 2.498835] chip_mode=00000001
321 [ 2.501893] Support this Device in MTK table! c2f1
322 [ 2.506840] [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
323 [ 2.513320] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
324 [ 2.519642] nand: Macronix NAND 128MiB 3,3V 8-bit
325 [ 2.524347] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
326 [ 2.531927] Scanning device for bad blocks
327 [ 2.819771] 7 fixed-partitions partitions found on MTD device MT7621-NAND
328 [ 2.826546] Creating 7 MTD partitions on "MT7621-NAND":
329 [ 2.831774] 0x000000000000-0x000000080000 : "uboot"
330 [ 2.837706] 0x000000080000-0x0000000c0000 : "uboot_env"
331 [ 2.843891] 0x0000000c0000-0x000000100000 : "factory"
332 [ 2.849892] 0x000000100000-0x000000140000 : "s_env"
333 [ 2.855720] 0x000000140000-0x000000180000 : "devinfo"
334 [ 2.861732] 0x000000180000-0x000002980000 : "firmware1"
335 [ 2.870032] 0x000002980000-0x000005180000 : "firmware2"
336 [ 2.877154] 1 uboot-env-boot_part partitions found on MTD device firmware2
337 [ 2.884061] 0x000002980000-0x000005180000 : "firmware"
338 [ 3.438509] 2 uimage-fw partitions found on MTD device firmware
339 [ 3.444473] 0x000002980000-0x000002b80000 : "kernel"
340 [ 3.450603] 0x000002b80000-0x000005180000 : "ubi"
341 [ 3.456742] [mtk_nand] probe successfully!
342 [ 3.461570] Signature matched and data read!
343 [ 3.465818] load_fact_bbt success 1023
344 [ 3.470276] libphy: Fixed MDIO Bus: probed
345 [ 3.542951] mtd_read_prop_mac: find prop "hw_mac_addr" in devinfo(max 0x40000) from 0x0
346 [ 3.550970] mtd_read_prop_mac: hw_mac_addr=
347 [ 3.556774] libphy: mdio: probed
348 [ 4.961009] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver
349 [ 4.967662] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
350 [ 4.978262] NET: Registered protocol family 10
351 [ 4.984286] Segment Routing with IPv6
352 [ 4.988020] NET: Registered protocol family 17
353 [ 4.992556] 8021q: 802.1Q VLAN Support v1.8
354 [ 4.999621] UBI: auto-attach mtd9
355 [ 5.003015] ubi0: attaching mtd9
356 [ 5.033798] UBI: EOF marker found, PEBs from 25 will be erased
357 [ 5.039967] ubi0: scanning is finished
358 [ 5.081872] ubi0: volume 1 ("rootfs_data") re-sized from 9 to 258 LEBs
359 [ 5.089203] ubi0: attached mtd9 (name "ubi", size 38 MiB)
360 [ 5.094644] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
361 [ 5.101543] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
362 [ 5.108298] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
363 [ 5.115245] ubi0: good PEBs: 297, bad PEBs: 7, corrupted PEBs: 0
364 [ 5.121247] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
365 [ 5.128436] ubi0: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number:
366 [ 5.137541] ubi0: available PEBs: 0, total reserved PEBs: 297, PEBs reserved for bad PEB handling: 13
367 [ 5.146764] ubi0: background thread "ubi_bgt0d" started, PID 378
368 [ 5.148847] block ubiblock0_0: created from ubi0:0(rootfs)
369 [ 5.158262] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
370 [ 5.165234] hctosys: unable to open rtc device (rtc0)
371 [ 5.183831] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
372 [ 5.195491] Freeing unused kernel memory: 1260K
373 [ 5.200022] This architecture does not have kernel memory protection.
374 [ 5.783744] init: Console is alive
375 [ 5.787378] init: - watchdog -
376 [ 6.295000] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up
377 [ 6.502425] kmodloader: loading kernel modules from /etc/modules-boot.d/*
378 [ 6.591413] usbcore: registered new interface driver usbfs
379 [ 6.596966] usbcore: registered new interface driver hub
380 [ 6.602453] usbcore: registered new device driver usb
381 [ 6.615285] SCSI subsystem initialized
382 [ 6.626976] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, using dummy regulator
383 [ 6.635689] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
384 [ 6.644627] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
385 [ 6.649947] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
386 [ 6.660739] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000210010
387 [ 6.669906] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
388 [ 6.676639] hub 1-0:1.0: USB hub found
389 [ 6.680467] hub 1-0:1.0: 2 ports detected
390 [ 6.685052] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
391 [ 6.690366] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
392 [ 6.697886] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
393 [ 6.704507] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
394 [ 6.713446] hub 2-0:1.0: USB hub found
395 [ 6.717275] hub 2-0:1.0: 1 port detected
396 [ 6.727313] usbcore: registered new interface driver usb-storage
397 [ 6.733578] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
398 [ 6.750877] init: - preinit -
399 [ 7.180814] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
400 [ 7.212805] random: procd: uninitialized urandom read (4 bytes read)
401 [ 7.212971] usb-storage 2-1:1.0: USB Mass Storage device detected
402 [ 7.225920] scsi host0: usb-storage 2-1:1.0
403 [ 7.366240] mtk_soc_eth 1e100000.ethernet: PPE started
404 Press the [f] key and hit [enter] to enter failsafe mode
405 Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
406 [ 10.582466] UBIFS (ubi0:1): default file-system created
407 [ 10.589130] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 496
408 [ 10.700430] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
409 [ 10.708276] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
410 [ 10.718161] UBIFS (ubi0:1): FS size: 31490048 bytes (30 MiB, 248 LEBs), journal size 1523712 bytes (1 MiB, 12 LEBs)
411 [ 10.728565] UBIFS (ubi0:1): reserved for root: 1487352 bytes (1452 KiB)
412 [ 10.735166] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID , small LPT model
413 [ 10.749347] mount_root: overlay filesystem has not been fully initialized yet
414 [ 10.756981] mount_root: switching to ubifs overlay
415 [ 10.781065] urandom-seed: Seed file not found (/etc/urandom.seed)
416 [ 10.861172] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = 0x80818
417 [ 10.876085] procd: - early -
418 [ 10.879061] procd: - watchdog -
419 [ 11.550737] procd: - watchdog -
420 [ 11.554202] procd: - ubus -
421 [ 11.583502] random: ubusd: uninitialized urandom read (4 bytes read)
422 [ 11.611421] random: ubusd: uninitialized urandom read (4 bytes read)
423 [ 11.618117] random: ubusd: uninitialized urandom read (4 bytes read)
424 [ 11.625387] procd: - init -
425 Please press Enter to activate this console.
426 [ 12.046531] kmodloader: loading kernel modules from /etc/modules.d/*
427 [ 12.057746] ip6_tables: (C) 2000-2006 Netfilter Core Team
428 [ 12.069204] Loading modules backported from Linux version v5.3-rc4-0-gd45331b00ddb
429 [ 12.076775] Backport generated by backports.git v5.3-rc4-1-0-g4ec72687
430 [ 12.085114] ip_tables: (C) 2000-2006 Netfilter Core Team
431 [ 12.096731] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
432 [ 12.127574] urngd: v1.0.0 started.
433 [ 12.145053] xt_time: kernel timezone is -0000
434 [ 12.214244] bus=0x1, slot = 0x0, irq=0x0
435 [ 12.218201] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
436 [ 12.241178] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
437 [ 12.241178]
438 [ 12.266469] random: crng init done
439 [ 12.269877] random: 6 urandom warning(s) missed due to ratelimiting
440 [ 12.456236] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
441 [ 12.471995] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
442 +ýýrýýýýýýýbus=0x2, slot = 0x1, irq=0x0
443 [ 20.131310] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
444 [ 20.161193] mt7615e 0000:02:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
445 [ 20.161193]
446 [ 20.185604] mt7615e 0000:02:00.0: N9 Firmware Version: _reserved_, Build Time: 20190103180756
447 [ 20.200746] mt7615e 0000:02:00.0: CR4 Firmware Version: _reserved_, Build Time: 20181207140436
448 [ 27.852570] PPP generic driver version 2.4.2
449 [ 27.858358] NET: Registered protocol family 24
450 [ 27.866716] kmodloader: done loading kernel modules from /etc/modules.d/*
451 [ 41.276638] mtk_soc_eth 1e100000.ethernet: PPE started
452 [ 41.287935] br-lan: port 1(eth0.2) entered blocking state
453 [ 41.293420] br-lan: port 1(eth0.2) entered disabled state
454 [ 41.299522] device eth0.2 entered promiscuous mode
455 [ 41.304484] device eth0 entered promiscuous mode
456 [ 41.311947] br-lan: port 1(eth0.2) entered blocking state
457 [ 41.317384] br-lan: port 1(eth0.2) entered forwarding state
458 [ 41.323511] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
459 [ 42.321086] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
460
461
462
463 BusyBox v1.31.0 () built-in shell (ash)
464
465 _______ ________ __
466 | |.-----.-----.-----.| | | |.----.| |_
467 | - || _ | -__| || | | || _|| _|
468 |_______|| __|_____|__|__||________||__| |____|
469 |__| W I R E L E S S F R E E D O M
470 -----------------------------------------------------
471 OpenWrt SNAPSHOT, r10942-9bebafcb5d
472 -----------------------------------------------------
473 === WARNING! =====================================
474 There is no root password defined on this device!
475 Use the "passwd" command to set up a new password
476 in order to prevent unauthorized SSH logins.
477 --------------------------------------------------
478 root@OpenWrt:/# ifconfig -a
479 br-lan Link encap:Ethernet HWaddr
480 inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
481 inet6 addr: fde0:62db:5134::1/60 Scope:Global
482 inet6 addr: fe80::/64 Scope:Link
483 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
484 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
485 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
486 collisions:0 txqueuelen:1000
487 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
488
489 eth0 Link encap:Ethernet HWaddr
490 inet6 addr: fe80::/64 Scope:Link
491 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
492 RX packets:102 errors:0 dropped:0 overruns:0 frame:0
493 TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
494 collisions:0 txqueuelen:1000
495 RX bytes:19418 (18.9 KiB) TX bytes:8199 (8.0 KiB)
496 Interrupt:21
497
498 eth0.1 Link encap:Ethernet HWaddr
499 inet6 addr: fe80::/64 Scope:Link
500 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
501 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
502 TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
503 collisions:0 txqueuelen:1000
504 RX bytes:0 (0.0 B) TX bytes:3368 (3.2 KiB)
505
506 eth0.2 Link encap:Ethernet HWaddr
507 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
508 RX packets:41 errors:0 dropped:0 overruns:0 frame:0
509 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
510 collisions:0 txqueuelen:1000
511 RX bytes:8012 (7.8 KiB) TX bytes:2126 (2.0 KiB)
512
513 lo Link encap:Local Loopback
514 inet addr:127.0.0.1 Mask:255.0.0.0
515 inet6 addr: ::1/128 Scope:Host
516 UP LOOPBACK RUNNING MTU:65536 Metric:1
517 RX packets:28 errors:0 dropped:0 overruns:0 frame:0
518 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
519 collisions:0 txqueuelen:1000
520 RX bytes:1904 (1.8 KiB) TX bytes:1904 (1.8 KiB)
521
522 wlan0 Link encap:Ethernet HWaddr
523 BROADCAST MULTICAST MTU:1500 Metric:1
524 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
525 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
526 collisions:0 txqueuelen:1000
527 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
528
529 wlan1 Link encap:Ethernet HWaddr
530 BROADCAST MULTICAST MTU:1500 Metric:1
531 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
532 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
533 collisions:0 txqueuelen:1000
534 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
535
536 root@OpenWrt:/# ls -l
537 drwxr-xr-x 2 root root 778 Sep 1 06:04 bin
538 drwxr-xr-x 4 root root 1300 Sep 1 06:05 dev
539 drwxr-xr-x 1 root root 512 Sep 1 06:05 etc
540 -rwxr-xr-x 1 root root 78 Dec 30 2018 init
541 drwxr-xr-x 11 root root 426 Sep 1 06:04 lib
542 drwxr-xr-x 2 root root 3 Sep 1 06:04 mnt
543 drwxr-xr-x 4 root root 360 Sep 1 06:05 overlay
544 dr-xr-xr-x 73 root root 0 Jan 1 1970 proc
545 drwxr-xr-x 16 root root 223 Sep 1 06:04 rom
546 drwxr-xr-x 2 root root 3 Sep 1 06:04 root
547 drwxr-xr-x 2 root root 822 Sep 1 06:04 sbin
548 dr-xr-xr-x 11 root root 0 Jan 1 1970 sys
549 drwxrwxrwt 15 root root 380 Sep 1 06:05 tmp
550 drwxr-xr-x 7 root root 89 Sep 1 06:04 usr
551 lrwxrwxrwx 1 root root 3 Sep 1 06:04 var -> tmp
552 drwxr-xr-x 2 root root 3 Sep 1 06:04 www
553 root@OpenWrt:/# ps
554 PID USER VSZ STAT COMMAND
555 1 root 1576 S /sbin/procd
556 2 root 0 SW [kthreadd]
557 3 root 0 IW [kworker/0:0]
558 4 root 0 IW< [kworker/0:0H]
559 5 root 0 IW [kworker/u8:0]
560 6 root 0 IW< [mm_percpu_wq]
561 7 root 0 SW [ksoftirqd/0]
562 8 root 0 IW [rcu_sched]
563 9 root 0 IW [rcu_bh]
564 10 root 0 SW [migration/0]
565 11 root 0 SW [cpuhp/0]
566 12 root 0 SW [cpuhp/1]
567 13 root 0 SW [migration/1]
568 14 root 0 SW [ksoftirqd/1]
569 16 root 0 IW< [kworker/1:0H]
570 17 root 0 SW [cpuhp/2]
571 18 root 0 SW [migration/2]
572 19 root 0 SW [ksoftirqd/2]
573 21 root 0 IW< [kworker/2:0H]
574 22 root 0 SW [cpuhp/3]
575 23 root 0 SW [migration/3]
576 24 root 0 SW [ksoftirqd/3]
577 25 root 0 IW [kworker/3:0]
578 26 root 0 IW< [kworker/3:0H]
579 27 root 0 IW< [netns]
580 41 root 0 IW [kworker/u8:3]
581 68 root 0 IW [kworker/3:1]
582 69 root 0 IW [kworker/2:1]
583 138 root 0 IW [kworker/1:1]
584 139 root 0 SW [oom_reaper]
585 140 root 0 IW< [writeback]
586 142 root 0 SW [kcompactd0]
587 143 root 0 IW< [crypto]
588 145 root 0 IW< [kblockd]
589 175 root 0 IW< [watchdogd]
590 199 root 0 SW [kswapd0]
591 268 root 0 IW< [pencrypt]
592 270 root 0 IW< [pdecrypt]
593 366 root 0 IW< [ipv6_addrconf]
594 378 root 0 SW [ubi_bgt0d]
595 383 root 0 IW< [kworker/0:1H]
596 384 root 0 IW< [kworker/2:1H]
597 385 root 0 IW [kworker/2:2]
598 386 root 0 IW< [kworker/3:1H]
599 389 root 0 IW< [kworker/1:1H]
600 429 root 0 IW [kworker/0:2]
601 437 root 0 IW [kworker/1:2]
602 453 root 0 SW [scsi_eh_0]
603 454 root 0 IW< [scsi_tmf_0]
604 455 root 0 SW [usb-storage]
605 496 root 0 SW [ubifs_bgt0_1]
606 573 root 1220 S /sbin/ubusd
607 574 root 1220 S /bin/ash --login
608 591 root 1028 S /sbin/urngd
609 660 root 0 IW< [cfg80211]
610 1012 root 1248 S /sbin/logd -S 64
611 1074 dnsmasq 1344 S /usr/sbin/dnsmasq -C /var/etc/dnsmasq.conf.cfg01411c
612 1111 root 1080 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p
613 1168 root 1700 S /sbin/netifd
614 1204 root 1448 S /usr/sbin/odhcpd
615 1360 root 1212 S udhcpc -p /var/run/udhcpc-eth0.1.pid -s /lib/netifd/
616 1361 root 1052 S odhcp6c -s /lib/netifd/dhcpv6.script -P0 -t120 eth0.
617 1391 root 1212 S< /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.
618 1720 root 1212 R ps
619 root@OpenWrt:/etc# ping www.google.co
620 PING www.google.co (): 56 data bytes
621 64 bytes from : seq=0 ttl=52 time=4.718 ms
622 ^C
623 --- www.google.co ping statistics ---
624 1 packets transmitted, 1 packets received, 0% packet loss
625 round-trip min/avg/max = 4.718/4.718/4.718 ms
626 root@OpenWrt:/etc# ping www.google.com
627 PING www.google.com (): 56 data bytes
628 64 bytes from : seq=0 ttl=47 time=4.927 ms
629 64 bytes from : seq=1 ttl=47 time=4.687 ms
630 ^C
631 --- www.google.com ping statistics ---
632 2 packets transmitted, 2 packets received, 0% packet loss
633 round-trip min/avg/max = 4.687/4.807/4.927 ms
634 root@OpenWrt:/etc# opkg update
635 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.gz
636 Updated list of available packages in /var/opkg-lists/openwrt_core
637 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/Packages.sig
638 Signature check passed.
639 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.gz
640 Updated list of available packages in /var/opkg-lists/openwrt_base
641 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/Packages.sig
642 Signature check passed.
643 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.gz
644 Updated list of available packages in /var/opkg-lists/openwrt_luci
645 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/Packages.sig
646 Signature check passed.
647 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.gz
648 Updated list of available packages in /var/opkg-lists/openwrt_packages
649 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/packages/Packages.sig
650 Signature check passed.
651 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.gz
652 Updated list of available packages in /var/opkg-lists/openwrt_routing
653 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/routing/Packages.sig
654 Signature check passed.
655 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.gz
656 Updated list of available packages in /var/opkg-lists/openwrt_telephony
657 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/telephony/Packages.sig
658 Signature check passed.
659 root@OpenWrt:/etc# opkg install luci
660 Installing luci (git-19.241.65047-dffe9ca-1) to root...
661 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci_git-19.241.65047-dffe9ca-1_all.ipk
662 Installing uhttpd (2019-08-17-6b03f960-3) to root...
663 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/uhttpd_2019-08-17-6b03f960-3_mipsel_24kc.ipk
664 Installing liblua5.1.5 (5.1.5-5) to root...
665 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/liblua5.1.5_5.1.5-5_mipsel_24kc.ipk
666 Installing lua (5.1.5-5) to root...
667 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/lua_5.1.5-5_mipsel_24kc.ipk
668 Installing luci-lib-nixio (git-19.241.65047-dffe9ca-1) to root...
669 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-nixio_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
670 Installing luci-lib-ip (git-19.241.65047-dffe9ca-1) to root...
671 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-ip_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
672 Installing rpcd (2019-06-05-89bfaa42-3) to root...
673 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/rpcd_2019-06-05-89bfaa42-3_mipsel_24kc.ipk
674 Installing libubus-lua (2018-10-06-221ce7e7-1) to root...
675 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/base/libubus-lua_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
676 Installing luci-lib-jsonc (git-19.241.65047-dffe9ca-1) to root...
677 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-lib-jsonc_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
678 Installing liblucihttp0 (2019-07-05-a34a17d5-1) to root...
679 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
680 Installing liblucihttp-lua (2019-07-05-a34a17d5-1) to root...
681 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
682 Installing luci-base (git-19.241.65047-dffe9ca-1) to root...
683 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-base_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
684 Installing libiwinfo-lua (2019-08-28-a9f95570-1) to root...
685 Downloading http://downloads.openwrt.org/snapshots/targets/ramips/mt7621/packages/libiwinfo-lua_2019-08-28-a9f95570-1_mipsel_24kc.ipk
686 Installing luci-mod-status (git-19.241.65047-dffe9ca-1) to root...
687 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-status_git-19.241.65047-dffe9ca-1_mipsel_24kc.ipk
688 Installing luci-mod-system (git-19.241.65047-dffe9ca-1) to root...
689 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-system_git-19.241.65047-dffe9ca-1_all.ipk
690 Installing luci-mod-network (git-19.241.65047-dffe9ca-1) to root...
691 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-network_git-19.241.65047-dffe9ca-1_all.ipk
692 Installing luci-mod-admin-full (git-19.241.65047-dffe9ca-1) to root...
693 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-mod-admin-full_git-19.241.65047-dffe9ca-1_all.ipk
694 Installing luci-theme-bootstrap (git-19.241.65047-dffe9ca-1) to root...
695 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-theme-bootstrap_git-19.241.65047-dffe9ca-1_all.ipk
696 Installing luci-app-firewall (git-19.241.65047-dffe9ca-1) to root...
697 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-firewall_git-19.241.65047-dffe9ca-1_all.ipk
698 Installing luci-app-opkg (git-19.241.65047-dffe9ca-1) to root...
699 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-app-opkg_git-19.241.65047-dffe9ca-1_all.ipk
700 Installing luci-proto-ppp (git-19.241.65047-dffe9ca-1) to root...
701 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ppp_git-19.241.65047-dffe9ca-1_all.ipk
702 Installing luci-proto-ipv6 (git-19.241.65047-dffe9ca-1) to root...
703 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/luci-proto-ipv6_git-19.241.65047-dffe9ca-1_all.ipk
704 Installing rpcd-mod-rrdns (20170710) to root...
705 Downloading http://downloads.openwrt.org/snapshots/packages/mipsel_24kc/luci/rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
706 Configuring liblucihttp0.
707 Configuring luci-app-opkg.
708 Configuring rpcd.
709 Configuring liblua5.1.5.
710 Configuring luci-lib-ip.
711 Configuring libubus-lua.
712 Configuring libiwinfo-lua.
713 Configuring lua.
714 Configuring luci-lib-nixio.
715 Configuring luci-lib-jsonc.
716 Configuring liblucihttp-lua.
717 Configuring luci-base.
718 Configuring luci-mod-system.
719 Configuring luci-theme-bootstrap.
720 Configuring luci-mod-status.
721 Configuring luci-app-firewall.
722 Configuring luci-proto-ppp.
723 Configuring luci-mod-network.
724 Configuring luci-mod-admin-full.
725 Configuring luci-proto-ipv6.
726 Configuring uhttpd.
727 Configuring rpcd-mod-rrdns.
728 Configuring luci.
729 root@OpenWrt:/etc# df -h
730 Filesystem Size Used Available Use% Mounted on
731 /dev/root 2.8M 2.8M 0 100% /rom
732 tmpfs 123.5M 764.0K 122.8M 1% /tmp
733 /dev/ubi0_1 27.1M 1.4M 24.3M 5% /overlay
734 overlayfs:/overlay 27.1M 1.4M 24.3M 5% /
735 tmpfs 512.0K 0 512.0K 0% /dev
736 root@OpenWrt:/etc# [ 2075.963720] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
737 [ 2075.973245] br-lan: port 2(wlan0) entered blocking state
738 [ 2075.978551] br-lan: port 2(wlan0) entered disabled state
739 [ 2075.984368] device wlan0 entered promiscuous mode
740 [ 2087.165173] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
741 [ 2087.171890] br-lan: port 2(wlan0) entered blocking state
742 [ 2087.177194] br-lan: port 2(wlan0) entered forwarding state
743 [ 2096.494533] device wlan0 left promiscuous mode
744 [ 2096.499322] br-lan: port 2(wlan0) entered disabled state
745 [ 2097.382887] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
746 [ 2097.393568] br-lan: port 2(wlan0) entered blocking state
747 [ 2097.398924] br-lan: port 2(wlan0) entered disabled state
748 [ 2097.404922] device wlan0 entered promiscuous mode
749 [ 2097.409972] br-lan: port 2(wlan0) entered blocking state
750 [ 2097.415296] br-lan: port 2(wlan0) entered forwarding state
751 [ 2097.749351] br-lan: port 2(wlan0) entered disabled state
752 [ 2107.953875] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
753 [ 2107.960561] br-lan: port 2(wlan0) entered blocking state
754 [ 2107.965861] br-lan: port 2(wlan0) entered forwarding state
755 [ 2117.964353] device wlan0 left promiscuous mode
756 [ 2117.969130] br-lan: port 2(wlan0) entered disabled state
757 [ 2118.782586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
758 [ 2118.792816] br-lan: port 2(wlan0) entered blocking state
759 [ 2118.798173] br-lan: port 2(wlan0) entered disabled state
760 [ 2118.804171] device wlan0 entered promiscuous mode
761 [ 2118.809362] br-lan: port 2(wlan0) entered blocking state
762 [ 2118.814692] br-lan: port 2(wlan0) entered forwarding state
763 [ 2119.189273] br-lan: port 2(wlan0) entered disabled state
764 [ 2130.258107] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
765 [ 2130.264811] br-lan: port 2(wlan0) entered blocking state
766 [ 2130.270163] br-lan: port 2(wlan0) entered forwarding state
767 [ 2245.748473] device wlan0 left promiscuous mode
768 [ 2245.753145] br-lan: port 2(wlan0) entered disabled state
769 [ 2246.536062] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
770 [ 2246.546273] br-lan: port 2(wlan0) entered blocking state
771 [ 2246.551680] br-lan: port 2(wlan0) entered disabled state
772 [ 2246.557667] device wlan0 entered promiscuous mode
773 [ 2246.562855] br-lan: port 2(wlan0) entered blocking state
774 [ 2246.568267] br-lan: port 2(wlan0) entered forwarding state
775 [ 2246.838430] br-lan: port 2(wlan0) entered disabled state
776 [ 2246.948147] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
777 [ 2246.954850] br-lan: port 2(wlan1) entered blocking state
778 [ 2246.960197] br-lan: port 2(wlan1) entered forwarding state
779
780 root@OpenWrt:/etc#
781 root@OpenWrt:/etc# uci show wireless
782 wireless.radio0=wifi-device
783 wireless.radio0.type='mac80211'
784 wireless.radio0.channel='11'
785 wireless.radio0.hwmode='11g'
786 wireless.radio0.path='pci0000:00/0000:00:00.0/0000:01:00.0'
787 wireless.radio0.country='00'
788 wireless.radio0.legacy_rates='1'
789 wireless.radio0.htmode='HT20'
790 wireless.default_radio0=wifi-iface
791 wireless.default_radio0.device='radio0'
792 wireless.default_radio0.network='lan'
793 wireless.default_radio0.mode='ap'
794 wireless.default_radio0.encryption='psk2'
795 wireless.default_radio0.key='qwerty1234'
796 wireless.default_radio0.ssid='asdf'
797 wireless.radio1=wifi-device
798 wireless.radio1.type='mac80211'
799 wireless.radio1.channel='36'
800 wireless.radio1.hwmode='11a'
801 wireless.radio1.path='pci0000:00/0000:00:01.0/0000:02:00.0'
802 wireless.radio1.htmode='VHT80'
803 wireless.radio1.__toggle='Enable'
804 wireless.radio1.country='00'
805 wireless.radio1.legacy_rates='1'
806 wireless.default_radio1=wifi-iface
807 wireless.default_radio1.device='radio1'
808 wireless.default_radio1.network='lan'
809 wireless.default_radio1.mode='ap'
810 wireless.default_radio1.ssid='asdf'
811 wireless.default_radio1.encryption='psk2'
812 wireless.default_radio1.key='qwerty1234'
813 root@OpenWrt:/etc#
814 {{/code}}
815
816 Firmware:
817
818 ./staging_dir/target-mipsel_24kc_glibc/root-ramips/lib/firmware/mediatek/mt7615_rom_patch.bin